My MBP wouldn't start this morning, it was just stuck on white screen with grey logo and fan running.  I replaced my magsafe power cord and resolved starting issue.  Now I can't connect to internet and iTunes won't load???  Help?

This morning I was just getting the white screen with logo and status bar with fan running.  I thought it was an issue with the power adapter so I went out and replaced it.  MBP will start now, but won't connect to internet.  I have full wi-fi signal.  Also, when I try to launch iTunes, it just quits right away.  Please help? 
-A

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Similar Messages

  • Mbpr won't boot up, stuck on white screen with apple logo when I turn it on

    This morning I noticed the apple logo on the outer shell of my mac was lit up, I thought this was very odd because the lid was closed and like all laptops when thier lids are shut the display ect. are supposed to switch off/go to standby?
    Anyway I quickly opened the lid of my laptop to find that iconic white boot up screen with the grey apple logo and the small spinning loading circle under it
    I've waited nearly 5 hours and tried multiple thing like booting up in safe mode, single user mode, and evan reinstalling OS X mavericks somebody help me please

    Read this article... It recommended something you did already but there are other troubleshooting tips I'm not sure you've tried.
    http://support.apple.com/kb/TS2570
    If none works, then a trip to the Apple Store is needed. It's most likely a hardware issue that you yourself cannot resolve.

  • Updated iPhone 4s to ios8 but screen is stuck on white screen with apple logo and progress bar

    I updated my phone last night and my iPhone screen is white and has a gray apple logo and a progress bar which has been the same for 12 hours. The bar looks almost completel but it hasn't moved at all. my phone was also unplugged accidentally during the night while it was on this screen. would that have any effect?

    Turn it off, go into recovery mode (command R at boot), wipe everything, go back and install Yosemite. Its suggested that you are using ethernet as it goes a lot faster that Wifi and more reliable. If you do not have a ethernet cable, you can still use Wifi. Hope this fixes your problem.

  • Macbook starts up with chime  then white screen with grey apple logo and spinning gear appears and continues to spin

    Help,  Turned on MacBook Pro this morning and just get a white screen with grey apple logo and spinning gear.  Cannot access desktop.

    Computer starts up in Safe boot by holding down the shift button.   But when I go to restart the same thing happens.  What should I do?

  • Won't turn on white screen with apple logo and spinning disc

    Mac book air won't boot up just has a white screen with apple logo and spinning disc have tried all the startup multiple key pushes , I think

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 9
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 10
    Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 11
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 12
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I don't know which Apple ID I used to register my Ipod Nano. I had to restore my Computer and now I can't connect my iPod to iTunes again. I have my serial number and ECID

    Hi, I don't know which Apple ID I used to register my Ipod Nano. I had to restore my Computer and now I can't connect my iPod to iTunes again. I have my serial number and ECID. I'm using Windows, BTW, sorry!

    Search your email for the word Logic (and set the search to All) and you should find the receipt (so long as you didn't delete it)
    Other than that.. simply contact Apple directly and ask.. Make sure you have your transaction details ready for them as they will need it...
    http://www.apple.com/contact/

  • My Mac will not allow me to downlode the latest iTunes and now I can not connect my phone and computer. THis is very frustrating! HELP!!!

    My Mac will not allow me to downlode the latest iTunes and now I can not connect my phone and computer. THis is very frustrating! HELP!!!

    Get more information about your computer. Go to the Apple in the upper left corner of any window, then  "About This Mac".  Write down what it says about "version"and report that here.  Now continue to "More Info..."  Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
    Even my 12 year old Mac lets me download the newest iTunes.  Of course I can't install it but any computer can download the installer files so we need to know precisely what you are trying and what error messages you are seeing.

  • I have a iMac (20-inch, Mid 2009). On start up It will sit at the White screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

    I have a iMac (20-inch, Mid 2009). On start up It will sit at the white screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I bought iphone 5s 2 days ago and suddenly it turn off and start again till the white screen with apple logo and start again

    i bought iphone 5s 2 days ago and suddenly it turn off and start again till the white screen with apple logo and start again
    please answer me as soon as possible

    Hello Ahmedabokamar,
    Thanks for the question! I'd recommend taking a look at the following article for troubleshooting steps that can help get your iPhone working again.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • So I have a tmobile iphone 5s and it's stuck on the white screen with black logo I tried restoring it with iTunes

    MMy phone been stuck in recovery mode tried to restore it nothing worked what can I do its at mobile iphone 5sSo I have a tmobile iphone 5s and it's stuck on the white screen with black logo I tried restoring it with iTunes & iTunes is just telling me errors and my iphone would shut down put a blue screen then go back with the white screen

    Has the phone been unlocked officially? Has the phone been jailbroken in the past? If yes, these could be reasons for the behavior of the phone.
    iPhone: About unlocking
    Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues

  • I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????

    I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????

    It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
    If that still won't work, post back with detailed information as to what exactly does happen as you go through the process.

  • Got a iMac upon start up it has white screen with apple logo and loading wheel spinning forever under it, does anybody know how to fix this?

    PLEASE HELP!!!!!! EMERGENCY Upon start up normal start up noise occurs, then after white screen with Grey Apple logo, and a spinning loading wheel under it (thee repetitive lines NOT rainbow one) ?!? then thats as far as it goes it stays on that screen forever will not boot up.  Any info on how to possibly fix? I've tried several of the Start up shortcuts , it wont even start up in Safe Mode . My fiance' is crushed she is a writer and EVERYTHING SHE HAS WORKED ON is somewhere on that hard drive. Any thoughts, i'm open to any and all LOGICAL responses, thank you very much for ya'lls time ........Its just heartbreaking to see my iMac in this vegistated coma,The whole reason i bought a mac was cause I love them I have Apple EVERYTHING, so once again please help.

    Try this: Switch off your iMac wait 10-15 seconds hold down the Option Key (alt) key then press the power botton but keep the option key down. This should show all the available options to boot from. I trust you have a full backup, Good luck.

  • On start up my Mac Book Pro shows a white screen with a spinning wheel. I have tried starting up with the Snow Leopard disk - all I get is a blue screen. I guess that this is a major repair job??????

    On start up my Mac Book Pro shows a white screen with a spinning wheel. I have tried starting up with the Snow Leopard disk - all I get is a blue screen. I guess that this is a major repair job??????

    If you have the exact same problem - take the computer to an Apple store or an AASP.  Whichever is more convenient for you.  If you have AppleCare call them!

  • When i start my mac and i got white screen with apple logo

    when i start my mac and i got white screen with apple logo n spening round n round

    Try here
    https://discussions.apple.com/thread/4917686?start=0&tstart=0

  • HT4061 I have an iphone  5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?

    I have an iphone  5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?  Does a totally dead battery have that effect?  I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
    Please help, thanks in advance all1

    Hi eggroll77,
    Welcome to Apple Support Communities.
    That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
    iOS: Restore errors 4005, 4013, and 4014
    I hope this helps.
    -Jason

Maybe you are looking for