My Mcbook pro doesn't start, My Mcbook pro doesn't start

I have problems to re-start my MacBook Pro

Without any detail from you how can anyone make a suggestion? What (exactly) happens when you try to turn your Mac on?

Similar Messages

  • My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

    My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

    If your MBP is under warranty, bring it to an Apple store and have the technicians fix it.  If not, try the steps in this support article:
    http://support.apple.com/kb/ts2570
    Ciao.

  • My macbook pro automatically goes into safe mode and doesn't start. I use mavericks.  what to do? ?

    my macbook pro automatically goes into safe mode and doesn't start. I use mavericks. What to do??

    Can you boot into your Recovery partition (hold down the command and R keys whilst booting)?
    Call back - you'll be able to connect to this forum from Safari whilst in Recovery.
    Clinton

  • I have a 3rd gen Ipod touch and when i connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I connect this older iPod to my iTunes?

    I have a 3rd gen Ipod touch. When I connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I make this older iPod show up on my iTunes?

    Hi ChristianHelpplz,
    Thanks for visiting Apple Support Communities.
    It seems like your iPod touch is not recognized by iTunes on your Mac, but your iPhone 6 is working normally.
    I recommend starting with these steps to troubleshoot your iPod touch and connection with your Mac:
    Check your USB connections
    Unplug other USB devices from your Mac and try again.
    Try a different USB port.
    Try a different USB cable.
    Restart your device
    Restart your iOS device or reset your iPod.
    Restart your Mac
    Turn your Mac off and back on.
    Update your software
    Check for software updates on your Mac.
    Check for an iTunes update.
    Check your security software
    If you have security software installed, learn how to resolve issues between iTunes and your security software.
    From:
    If you don't see your connected device in iTunes for Mac - Apple Support
    If you've tried these steps and your iPod touch is still not recognized, try placing it into Recovery Mode next:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Sincerely,
    Jeremy

  • I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I runni

    I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
    There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
    Any comments or ideas ?
    Thank you in anticipation.

    First backup your users files off the machine to a external storage drive (not TimeMachine!)
    Most commonly used backup methods
    Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
    Disk Utility is under the Utilities menu on the second screen.
    Step by Step to fix your Mac
    If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one.

  • Unble to start my macbook pro

    when i start my macbook pro it does not come on....what do i do?

    Try Resetting your Mac's PRAM and NVRAM
    If that doesn't help, try Intel-based Macs: Resetting the System Management Controller
    If that doesn't help, boot from your install disc. The startup disk may need repairing >  Using Disk Utility to verify or repair disks

  • My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    Hy myneck,
    Happy Holidays!  The resource below may provide some steps to try if your MacBook Pro won't start.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    I hope this information helps ....
    - Judy

  • Macbook Pro, bought 2012, takes a very long time to start up/restart (5 mins). How do I fix this?

    My Macbook Pro, bought 2012, takes a very long time to start up/restart (5 mins) every single time I have shut it down.  I try not to shut it down at all now because once or twice, I have got a grey screen, and then nothing. I've held down the power button to shut down again and restart  How do I fix all this?

    Start up with your built-in Recovery disk by holding down the Command and R keys when starting. Open Disk Utility from there and use it to REPAIR your disk (you've already verified it and it came up with errors).
    With any luck, your problems will be solved. While I was there, I would also repair  permissions.
    Good luck,
    Clinton

  • In my Macbook pro camera just doesnt go off. Everytime I start it starts but doesnt detect.

    In my Macbook pro camera just doesnt go off. Everytime I start it starts but doesnt detect.

    Hello Abhishekrkate
    Start your troubleshooting with the article below; it will assist with different options to get your iSight Camera back up and running.
    How to Troubleshoot iSight
    http://support.apple.com/kb/ht2090
    Regards,
    -Norm G.

  • How to start my macbook pro

    Hi there,
    I got a problem with starting my MacBook Pro, I started my macbook this morning, and the macbook keeps loading in Chrome, and then I force shut down it by long time pressing the Power button... After that, I cannot open my Macbook, it keep loading in the first page with Apple logo on it.
    Any one got the same problem, please tell me how to solve it.
    Thanks in advance,
    Sandy

      Grey Screen and spinning wheel at startup
    http://support.apple.com/kb/PH11044
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836
    Reinstall OS X
    http://support.apple.com/kb/PH10763?viewlocale=en_US

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • Mac Pro keeps crashing when using with KVM. where to start my investigation

    hi guys.
    i have recently ordered ATEN CS-1762 KVM switch (2 ports model) to control my Mac and PC with a single keyboard and mouse. This KVM supports USB and DVI. the problem i have is Mac crashing when i switch from PC. I contacted mfg lately and they are unaware of this issue due to not having Mac Pro to test with this appliance. They have tested it with Mac Mini, G4 and G5 though and all was OK. based on this they put a description that this box is compatible with Mac. Anyway, being relatively new Mac user i ask for your help.
    here are my steps and some ATEN's thoughts:
    1. accroding to ATEN tech support, i should power up my second computer after the first one was started and is running. firstly i start the Mac Pro, 5 mins after that i power up my PC.
    2. When both computers are up and running (Mac is in KVM focus), i switch to PC and all seems OK. I have noticed though that if NumLock is activated during the PC session, I won't be able to switch back to Mac. However, even though NumLock is OFF i still may have troubles when switching back to Mac. So it is not the rule, but maybe the clue to start with..
    NOTES:
    1. if i start PC first, Mac won't start at all. The power led will be on, but there will be no picture on the monitor and it won't accept any keyboard/mouse inputs as well as it will be network inaccessible.
    2. I tried looking into Mac's logs but need your help in getting this clear.
    here is the log. as you will see it stops at 13:04 and then continues at 13:08 after reboot.
    i've seen some parallel's VMs but i don't have Parallels installed. i used to have it, but then it never happened to work so i deleted it from the machine. can this be the case it is still somewhere?
    pls guys, any thoughts are very welcome!!!
    PS: i can cause Mac to crash the same way if necessary or if log looks inclomplete. the thing forgot to mention is: when Mac crashes and i reboot it, it will not necessarily boot up completely. i've noticed that i would have to reset the KVM switch prior to Mac's successful start up. so maybe i copied the wrong log (not the one immediately after the crash). pls advise here
    Alex
    EDIT: specs for machines are:
    Mac Pro dual 2.6GHz, 1GB (+1GB aftermarket added half a year back, works perfectly), HDD 260GB, Nvidia 7300 256Mb.
    PC - Supermicro dual xeon 1.6GHz, 4GB Ram, 4 x 36GB SCSI, Nvidia 5200 256 MB with Windows 2000 Server.
    Apr 18 13:03:38 localhost kernel[0]: hi mem tramps at 0xffe00000
    Apr 18 13:03:38 localhost kernel[0]: PAE enabled
    Apr 18 13:03:38 localhost kernel[0]: 64 bit mode enabled
    Apr 18 13:03:38 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Apr 18 13:03:38 localhost kernel[0]: vmpagebootstrap: 512109 free pages
    Apr 18 13:03:38 localhost kernel[0]: migtable_maxdispl = 71
    Apr 18 13:03:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Apr 18 13:03:38 localhost kernel[0]: 77 prelinked modules
    Apr 18 13:03:38 localhost kernel[0]: ACPI CA 20060421
    Apr 18 13:03:38 localhost kernel[0]: AppleIntelCPUPowerManagement: ready
    Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=7 Enabled
    Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=6 Enabled
    Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=0 Disabled
    Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=0 Disabled
    Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=0 Disabled
    Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=0 Disabled
    Apr 18 13:03:38 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Apr 18 13:03:38 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Apr 18 13:03:38 localhost kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
    Apr 18 13:03:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Apr 18 13:03:38 localhost kernel[0]: Started CPU 01
    Apr 18 13:03:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Apr 18 13:03:38 localhost kernel[0]: Started CPU 02
    Apr 18 13:03:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Apr 18 13:03:38 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Apr 18 13:03:38 localhost kernel[0]: Started CPU 03
    Apr 18 13:03:38 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Apr 18 13:03:38 localhost kernel[0]: Security auditing service present
    Apr 18 13:03:38 localhost kernel[0]: BSM auditing present
    Apr 18 13:03:38 localhost kernel[0]: disabled
    Apr 18 13:03:38 localhost kernel[0]: rooting via boot-uuid from /chosen: BE5A00F3-0C3D-4125-9DE4-3F2193D3DAA8
    Apr 18 13:03:38 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Apr 18 13:03:38 localhost kernel[0]: USB caused wake event (EHCI)
    Apr 18 13:03:38 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0016cbfffe6cfb5c; max speed s800.
    Apr 18 13:03:38 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3160812AS P Media/IOGUIDPartitionScheme/Customer@2
    Apr 18 13:03:38 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
    Apr 18 13:03:38 localhost kernel[0]: jnl: replay_journal: from: 3560448 to: 7934976 (joffset 0x48b341000)
    Apr 18 13:03:38 localhost kernel[0]: HFS: Removed 9 orphaned unlinked files
    Apr 18 13:03:38 localhost kernel[0]: Jettisoning kernel linker.
    Apr 18 13:03:38 localhost kernel[0]: Resetting IOCatalogue.
    Apr 18 13:03:38 localhost kernel[0]: PXS1: family specific matching fails
    Apr 18 13:03:38 localhost kernel[0]: Matching service count = 1
    Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
    Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
    Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
    Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
    Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
    Apr 18 13:03:38 localhost kernel[0]: NVDANV40HAL loaded and registered.
    Apr 18 13:03:38 localhost kernel[0]: PXS1: family specific matching fails
    Apr 18 13:03:38 localhost kernel[0]: Previous Shutdown Cause: 3
    Apr 18 13:03:38 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
    Apr 18 13:03:38 localhost mDNSResponder-108.4 (Jan 8 2007 20: 39:46)[30]: starting
    Apr 18 13:03:38 localhost memberd[38]: memberd starting up
    Apr 18 13:03:38 localhost DirectoryService[42]: Launched version 2.1 (v353.6)
    Apr 18 13:03:39 localhost lookupd[44]: lookupd (version 369.6) starting - Wed Apr 18 13:03:39 2007
    Apr 18 13:03:39 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:01:63:16
    Apr 18 13:03:39 localhost configd[34]: No AirPort Driver found.
    Apr 18 13:03:39 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:01:63:17
    Apr 18 13:03:39 localhost diskarbitrationd[37]: disk0s2 hfs FDAB59BA-2B84-3AD5-AF66-4BD8CFA20261 Macintosh HD /
    Apr 18 13:03:40 localhost lookupd[55]: lookupd (version 369.6) starting - Wed Apr 18 13:03:40 2007
    Apr 18 13:03:42 localhost kernel[0]: Intel8254x -- Link Up -- 00:17:f2:01:63:16 -- called by interruptOccurred() --
    Apr 18 13:03:42 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
    Apr 18 13:03:42 localhost kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x41e1, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
    Apr 18 13:03:42 localhost mDNSResponder: Adding browse domain local.
    Apr 18 13:03:43 localhost loginwindow[62]: Login Window Started Security Agent
    Apr 18 13:03:46 localhost kernel[0]: Intel8254x -- Link down -- 00:17:f2:01:63:17 -- called by enableHardware() --
    Apr 18 13:03:46 localhost kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x0, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
    Apr 18 13:03:46 Alexs-Computer configd[34]: setting hostname to "Alexs-Computer.local"
    Apr 18 13:03:46 Alexs-Computer TabletDriver[71]: RunApplication called while eRelaunching
    Apr 18 13:03:52 Alexs-Computer configd[34]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
    Apr 18 13:03:52 Alexs-Computer configd[34]: posting notification com.apple.system.config.network_change
    Apr 18 13:03:52 Alexs-Computer lookupd[82]: lookupd (version 369.6) starting - Wed Apr 18 13:03:52 2007
    Apr 18 13:03:52 Alexs-Computer ntpdate[94]: can't find host time.euro.apple.com\n
    Apr 18 13:03:52 Alexs-Computer ntpdate[94]: no servers can be used, exiting
    Apr 18 13:03:55 Alexs-Computer configd[34]: target=enable-network: disabled
    Apr 18 13:04:15 Alexs-Computer configd[34]: posting notification com.apple.system.config.network_change
    Apr 18 13:04:15 Alexs-Computer lookupd[148]: lookupd (version 369.6) starting - Wed Apr 18 13:04:15 2007
    Apr 18 13:04:15 Alexs-Computer SystemStarter[41]: "/Library/StartupItems/Tablet" failed security check: permissions
    Apr 18 13:04:17 Alexs-Computer kernel[0]: Parallels Workstation Hypervisor started.
    Apr 18 13:04:17 Alexs-Computer kernel[0]: Parallels Workstation VMM Main driver started.
    Apr 18 13:04:18 Alexs-Computer kernel[0]: comparallels_kextPvsvnic: Ethernet address 00:01:23:45:67:89
    Apr 18 13:04:19 Alexs-Computer SystemStarter[41]: Parallels VirtualMachine drivers (149) did not complete successfully
    Apr 18 13:08:25 localhost kernel[0]: hi mem tramps at 0xffe00000
    Apr 18 13:08:25 localhost kernel[0]: PAE enabled
    Apr 18 13:08:25 localhost kernel[0]: 64 bit mode enabled
    here couple more logs right at the moment of crash (found in paic.log). hopefully then can shed som elight on the troubles:
    pls advise
    Wed Apr 18 13:04:16 2007
    panic(cpu 0 caller 0x001A429B): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
    CR0: 0x8001003b, CR2: 0x00004000, CR3: 0x01019000, CR4: 0x000006e0
    EAX: 0x23a3d578, EBX: 0x00000000, ECX: 0x00001000, EDX: 0x00004000
    CR2: 0x00004000, EBP: 0x2544bc18, ESI: 0x23a3d578, EDI: 0x00004000
    EFL: 0x00010206, EIP: 0x0019637c, CS: 0x00000008, DS: 0x00000010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2544b9d8 : 0x128d08 (0x3cb134 0x2544b9fc 0x131de5 0x0)
    0x2544ba18 : 0x1a429b (0x3d0e4c 0x0 0xe 0x3d0670)
    0x2544bb28 : 0x19ada4 (0x2544bb40 0x23a39578 0x2544bb98 0x84ae50)
    0x2544bc18 : 0x84b148 (0x23a39000 0x2 0x2544bc68 0x1a1738)
    0x2544bc38 : 0x8393d4 (0x2544bddc 0x0 0x2544bc68 0x4b0000)
    0x2544bd18 : 0x6ca33a (0x23a39000 0x2544bdaa 0x2544bdaa 0x84)
    0x2544bd78 : 0x6be697 (0x3c34000 0x2544bdaa 0x2544bdaa 0x84)
    0x2544bdf8 : 0x6a72e3 (0x3c34000 0x1 0x2544be48 0x1a1738)
    0x2544be18 : 0x6aee4a (0x553f8000 0x0 0x3ff96a27 0x3d87)
    0x2544be78 : 0x546b55 (0x3c34000 0x2544beac 0x1 0x1a26ce)
    0x2544bec8 : 0x54a1d0 (0x3a21e00 0x3 0x3f60ddf8 0x3d87)
    0x2544bee8 : 0x54bc8d (0x3a21e00 0x7abf 0x5cbd220 0x5cbd160)
    0x2544bf28 : 0x39c536 (0x3a21e00 0x3a40280 0x8 0x2)
    0x2544bf78 : 0x13d7d9 (0x3a40280 0x3a87e78 0x0 0x0)
    0x2544bfc8 : 0x19ac1c (0x0 0x0 0x19e0b5 0x397fcec) Backtrace terminated-invalid frame pointer 0x0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.NVDAResman(4.5.2)@0x6c9000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
    dependency: com.apple.iokit.IONDRVSupport(1.4.5)@0x6ba000
    com.apple.iokit.IONDRVSupport(1.4.5)@0x6ba000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
    com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
    com.apple.iokit.IOHIDFamily(1.4.10)@0x531000
    Kernel version:
    Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386
    Wed Apr 18 17:06:26 2007
    panic(cpu 1 caller 0x001A429B): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
    CR0: 0x8001003b, CR2: 0x00004000, CR3: 0x01019000, CR4: 0x000006e0
    EAX: 0x23a4d578, EBX: 0x00000000, ECX: 0x00001000, EDX: 0x00004000
    CR2: 0x00004000, EBP: 0x25443c18, ESI: 0x23a4d578, EDI: 0x00004000
    EFL: 0x00010206, EIP: 0x0019637c, CS: 0x00000008, DS: 0x04080010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x254439d8 : 0x128d08 (0x3cb134 0x254439fc 0x131de5 0x0)
    0x25443a18 : 0x1a429b (0x3d0e4c 0x1 0xe 0x3d0670)
    0x25443b28 : 0x19ada4 (0x25443b40 0x23a49578 0x1 0x4065004)
    0x25443c18 : 0x84b148 (0x23a49000 0x2 0x25443c48 0x713bbf)
    0x25443c38 : 0x8393d4 (0x25443ddc 0x0 0x25443c68 0x7116c2)
    0x25443d18 : 0x6ca33a (0x23a49000 0x25443daa 0x25443daa 0x84)
    0x25443d78 : 0x6be697 (0x3c61c00 0x25443daa 0x25443daa 0x84)
    0x25443df8 : 0x6a72e3 (0x3c61c00 0x2 0x25443e28 0x1e)
    0x25443e18 : 0x6aee4a (0x523e0000 0x0 0xfd8e30e2 0xc93)
    0x25443e78 : 0x546b55 (0x3c61c00 0x25443eac 0x2 0x1a26ce)
    0x25443ec8 : 0x54a1d0 (0x3a21e00 0x3 0xfcf5a332 0xc93)
    0x25443ee8 : 0x54bc8d (0x3a21e00 0x1917 0x4336be0 0x4336b20)
    0x25443f28 : 0x39c536 (0x3a21e00 0x3a40280 0x8 0x2)
    0x25443f78 : 0x13d7d9 (0x3a40280 0x3a39ff8 0x0 0x3303)
    0x25443fc8 : 0x19ac1c (0x0 0x0 0x19e0b5 0x5cb2144) Backtrace terminated-invalid frame pointer 0x0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.NVDAResman(4.5.2)@0x6c9000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
    dependency: com.apple.iokit.IONDRVSupport(1.4.5)@0x6ba000
    com.apple.iokit.IONDRVSupport(1.4.5)@0x6ba000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
    com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
    com.apple.iokit.IOHIDFamily(1.4.10)@0x531000
    Kernel version:
    Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386

    ok so i experimented a little with the hardware and here what i have to the moment:
    1. i thought that the usb kb could be the case for mac os to crash so i disconnected the cable from the KVM and plugged normal apple kb to the mac.
    2. however when i tried switching back to mac, the machine crashed again.
    from what i noticed for the last few days 'working' with this kvm switch was the screen resolution changing while i was switching. meaning the screen flickered for couple of times prior to showing 1280x1024 that was set up in the system. during flickering the resoution became 1024x768. i 've seen it pretty clearly, just it was for half of a second.
    also when powering up both machines, they were starting with 1024x768 and not 1280x1024 as was set up. i had to manually change the screen resolution on both machines (pc and mac) every time after successful start up.
    so by far my understanding is that kvm switch forces monitor for 1024x768 during switches and on start up. it also causes the OSes (win2K and MacOSX) to lose 1280x1024 and accept 1024x768 as if the monitor was changed and couldn't operate at a higher resolution.
    having said that i uploaded this info to kvm mfg (ATEN) and couple more mac forums so that this info may help someone else when ordering a kvm for mac. at the same time i am still open for any thoughts, advices and crazy ideas to get round this bug.
    alex

  • My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    Hey rulosrojos,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
    iPod nano (6th generation): Hardware troubleshooting
    https://support.apple.com/en-us/TS3474
    Sincerely,
    Allen

  • After effects CC doesn't run on MAC PRO

    after effects CC doesn't run on MAC PRO. Only the CS6 version run on this machine. What can i do. Thanks.

    With my MACPRO it's impossible to activate the GPU.
    What can we do. Now it's impossible to enable a video in AECC.
    For information the configuration of my machine and the windows of error in after effect CC.

  • Use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... An

    Hi...
    My name is Turgay and have been using computer since 1982... 2 years ago, because of my friend's advice, i bought an iMac... It was the first Mac that i use... Till that, i was using normal PC's...
    I bought an 24" iMac on July 2009 and started to use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... And it increased. Because of this i took my iMac to your authorised distributor http://www.bilkom.com.tr...
    They changed my screen but in 2 months it happened 3 times and i wanted them to change my iMac with new one, under customer laws... In our country, the device must be changed with new one if the same problem occurs in 3 months. Because i know the customer satisfaction of Apple, i didn' worry about it but Bilkom refused my will... I spoke with them for 2 months but nothing happened, they just told me, it' not our problem.
    Because of this speech, i sued them on June 2011... Last week, i won the case but just for the return of invoince... It costs 3.200 Turkish Liras (1.800$) and there's no 24" iMac unused... Bilkom again refused to give me an iMac... I thought that Apple's customer satisfaction can't be like this... I didn't write anything to Apple till now but if i can't get an iMac, i must return to normal PC after 2 years... And i don't want that... I offered an iMac 27" with core i7... No matter Bilkom accepts or not, they don't care of me... I'm a customer, they should do... I've never seen such a like company. I hope the real Apple will help my problem and save me from Bilkom...
    Waiting for your reply... Thanks and regards...
    Turgay Kala
    General Manager

    Unfortunately, you are not communicating with Apple here - we are all other users volunteering our time to help with technical problems.
    Here is a list of Apple contacts; there is no email address  - you will need to write a letter to their corporate headquarters or call them:
    http://www.apple.com/contact/
    Although, it appears that your problem is with a third party store and that you have won in court - did you get your money back? 24" iMacs have not been made since 2009 or 2010. Now there are 21" and 27" iMacs.

  • My brother-in-law recently passed away. My sister gave his MacBook Pro to my niece. When she opens and starts the laptop, it shows my brother-in-laws name. Is there a way to change his name to her name without formatting the device and starting over?

    My brother-in-law recently passed away. My sister gave his MacBook Pro to my niece. When she opens and starts the laptop, it shows my brother-in-laws name. Is there a way to change his name to her name without formatting the device and starting over?

    BigTex415,
    my condolences for your family’s loss. If all she seeks to do is to change the display name, and she’s willing to leave the account name unchanged, then she could do the following: log in as the administrative user and open the Users & Groups pane of System Preferences. If the padlock in the lower-left corner is locked, unlock it. Select the account that shows your brother-in-law’s name on the left-hand side of the window, and then on the right-hand side, change the text in the “Full name” textbox to her preferred display name. If desired, click on the padlock in the lower-left corner to relock it.

Maybe you are looking for