My measures for my tabular model don't display the totals any more next to the measure.

In the lower measures grid in the Visual Studio IDE I no longer see my totals next to the measure itself. What caused them to go away and can I get them back?

do you mean the total like on the screenshot below?
It seems that the totals was use defined to calculate the total amount.

Similar Messages

How to define what operation a tabular model do on subtotals and totals pivot to avg, min, max, not to the default sum

When i make a pivot in Excel 2010 i can change the cell to give me AVG, MAX, MIN, not only SUM, but when i créate a pivot from a tabular model, these options are disabled, i have posted a image, with a "tabla dinámica" or dynamic table
in this case, i can see the functions that i want but when i use the tabular model as a source, the options average (promedio), is disabled.
How i can enable this functions, or are a way to créate a formula for totals and subtotals, and other formula for detail in dax?
Thanks in advance.

Hi juliomrs,
SSAS Tabular model doesn't let us to modify the aggregate function from the Client side. In this case, you need to create a new measure and use the function what you want inside the SSAS Tabular model.
For more information regarding DAX functions, please see:
DAX Function Reference:
http://msdn.microsoft.com/en-us/library/ee634396.aspx
Regards,
Elvis Long
TechNet Community Support

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.

Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.
The above is what the bar says. It's been a while and wondered, maybe Apple changed the format for forums. Then got this nice big blank canvas to air my concerns. Went to school for Computer Science, BSEE, even worked at Analog Devices in Newton Massachusetts, where they make something for apple.
The bottom line is fast CPU = more FPU = more headroom and still can't figure out why the more cores= the slower it gets unless it's to get us in to a 6 core then come out with faster cores down the road or a newer Mac that uses the GPU. Also. Few. I'm the guy who said a few years ago Mac has an FCP that looks like iMovie on Steroids. Having said that I called the campus one day to ask them something and while I used to work for Apple, I think she thought I still did as she asked me, "HOW ARE THE 32 CORES/1DYE COMING ALONG? Not wanting to embarrass her I said fine, fine and then hung up. Makes the most sense as I never quite got the 2,6,12 cores when for years everything from memory to CPU's have been, in sets of 2 to the 2nd power. 2,4,8,16,32,64,120,256,512, 1024, 2048,4196,8192, 72,768. Wow. W-O-W and will be using whatever I get with Apollo Quad.
Peace to all and hope someone can point us in THE RIGHT DIRECTION. THANK YOU

Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

TS2446 So I have an iphone and for some reason I don't know the password for my Apple ID so I can't download apps and I don't have the password to my email to change it and I don't know the secret questions , what can I do to make a new Apple ID ?

So I have an iphone and for some reason I don't know the password for my Apple ID so I can't download apps and I don't have the password to my email to change it and I don't know the secret questions , what can I do to make a new Apple ID ?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

HT2968 I can not update several of my apps that i have purchased a while back in my Apps Store on my MacPro. Because it keeps using my old @me account for iTunes and i don't remember the password or security question, Please help?

I can not update several of my apps that i have purchased a while back in my Apps Store on my MacPro. Because it keeps using my old @me account for iTunes and i don't remember the password or security question, Please help?

Hi AlphaCentori,
If you are having issues accessing the Apple ID that was used to originally purchase those apps, you may find the following article helpful:
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden

I can't sign out of iCloud on my iPhone 4 because I have the locator turned on for my phone and don't know the old password for my old Apple ID. I've tried all of the suggestions seen on here and the Apple ID site and cannot delete the cloud. Help?

I can't sign out of iCloud on my iPhone 4 because I have the locator turned on for my phone and don't know the old password for my old Apple ID. I've tried all of the suggestions seen on here and the Apple ID site and cannot delete the cloud. Help?

LPC1979 wrote:
... it keeps asking me for the OLD password (2 email addresses ago) and then when entered correct tells me the account does not exist...which I already know. ...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...

How can I find itunes 10.1 for windows. I don't want the cloud in newer version.

How can I find iTunes 10.1 for windows. I don't want the cloud, and my iPod touch won't go back to prior versions.

Had the same problem. Also worked fine on my MacBook, but not on my new iMac. Here's what I did to fix it:
Archive and Reinstall Mac OS (takes about 40 minutes). This reverted my system back to 10.6.2. Just pop in your Mac OS disc that came with your computer. Mine had 10.6.2 on it, and "Archive and Install" is the default option. When it's done, run software update and update everything. Now it all works fine.
Somewhere along the way, some file got corrupted somehow. But doing an "archive and install" of your OS undoes whatever file damage was incurred, and allows everything to update normally via Software Update as it should.

EM don´t display the instances(infrastructure and midtier)

Hi OTN Forum,
I have installed a box Linux RH AS with Oracle9iAS R2 infrastructure and midtier in the same box.
When I log in into EM with the user ias_admin the page don´t display the instances.
Any idea about this issue?
Thanks folks!
Regards,
Wilson

The development module displays images in ProPhoto RGB colour space, the library module (I assume that's Bibliothèque) displays images in Adobe RGB colour space.
If there's a difference, then one possibility is a colour management problem (faulty monitor profile). This could affect monochrome images, as it includes the tone curve. Is the monitor calibrated and profiled with a hardware tool (Spyder, Colormunki or similar)? If so, try recalibrating. If not, then see what default profile is set for the monitor. Control Panel (don't know what that is in French) -> Color Management. If nothing is set, you could try setting the default profile as sRGB (probably called "sRGB IEC61966-2.1"). If sRGB isn't shown, click Add... Does that make the two modules the same? It might make the picture worse, but if makes then the same, then you know it's a monitor profile problem. Try using Windows calibration (Colour management, Advanced tab), but better is to use a hardware tool.
Another problem could be that the Lightrroom previews are corrupt. Develop module renders each image as it's displayed, Library module renders the images to a jpeg preview, and stores the preview. The preview is rebuilt only when the Library module thinks the image has changed. So you could change the image in Develop, and see if the image then chagnes in Library module. If it doesn't change, something serious is wrong (protection issue on previews folder? Faulty Lightroom installation?). If it changes, but it's still different between Library and Develop, I'd suspect a colour management (monitor profile) problem.

TS4006 Can get my iPad to locate iPhone but can't seem to get cloud app on my iPad. My phone and iPad don't display the iPad in the device corner?

Can get my iPad to locate iPhone but can't seem to get cloud app on my iPad. My phone and iPad don't display the iPad in the device corner?

You went from the wrong direction. Start with Nikon website and the WU-1a adapter. click on the download at the App store....
http://www.nikonusa.com/en/Nikon-Products/Product/Wireless/27081/WU-1a-Wireless- Mobile-Adapter.html
It will take you to the App.

HT4082 Don't have gmail account any more and now can't sign into YouTube on my IPad.

Don't have google account any more-gmail-and now having trouble signing into YouTube. They are asking me to sign in to my google account to sign in on my IPad but don't have one to sign in to.

What does this have to do with Apple or the iPad?
Youtube requires a gmail account to sign in. Meet their requirements.

Tabular Modeling. What is the best practice for importing data into VS to limit the records in the designer?

Should I wrap the queries in a procedure with a @StartDate and @EndDate and create a test partition to pass a small date range?
Or can i use the Table properties screen to put the command there and will it run and not be affected or affect the partitions?This would be nice if this SQL statement on this screen was independent of the partitions and I could just leave it with the the
command text = EXEC TransactionDetail '2014-01-01', '2014-05-31' Especially since if you have many tables that load based on a date range. i would not want to jump in and change that query on all of them.
Is there a a way to have a parameter in the project so all tables would get the same @startDate and @EndDate so I could change it in one place?
And I am not stuck to these questions\options, If there is a better way to mass change the queries to run a subset of data for the designer I'd like to hear it.
Thank You,
Phil

Hi Phil,
According to your description, you are looking for the best way to control the rows that are loaded into a table, right?
When importing data to a table of tabular model, we can apply filters to control the rows that are loaded into a table. After you have imported the data, you cannot delete individual rows. However, you can apply custom filters to control the way that
rows are displayed. Rows that do not meet the filtering criteria are hidden. For the detail information about it, please refer to the link below.Filter Data in a Table (SSAS Tabular)
If I have anything misunderstand, please point it out.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here
Charlie Liao
TechNet Community Support

Migrated data from Powerpivot to SSAS tabular model, can i change the Excel source to SSAS?

Hi
I have developed some powerview reports in Excel/powerpivot files. Now, i have migrated powerpivot data from these files to SSAS tabular cubes. The question is if i can change the source of the Excel files, to "feed" my powerview reports
with these SSAS Tabular cubes, or do i have to create my powerview reports again via new Excel files or PowerBI designer (and "point" these to SSAS Tabular cubes). It totally seems not logical and so i think that's a good question.
Kind regards

Hi Pascal,
Power View only supports Microsoft BI Semantic Model (BISM) for Power View data sources. BISM files are designed specifically for connecting to Excel workbooks and SSAS tabular models. The Excel workbooks can be in the PowerPivot Gallery on a SharePoint
site or in a SharePoint library. In this issue, you can publish the PowerPivot workbooks to a SharePoint library or the PowerPivot Gallery, and then create RSDS file or BISM data source to the workbooks. Here are the connection string samples:
An Excel workbook in Shared Documents on a SharePoint site:
Data Source=”http://<SharePointSite>/Shared Documents/MyExcelWorkbook.xlsx”
An Excel workbook in the PowerPivot Gallery on a SharePoint site:
Data Source=”http://<SharePointSite>/PowerPivot Gallery/MyExcelWorkbook.xlsx”
Reference:
http://office.microsoft.com/en-us/excel-help/create-a-connection-to-a-data-model-for-power-view-HA102835737.aspx?CTT=5&origin=HA102834736
Regards,
Mike Yin
TechNet Community Support

New PC asks for authorization and I don't know the password

I purchase a new PC for my wife and transferred the itunes library via an external drive. I then auhorized the new computer on her account (she has about 2,300 songs). When I tried to sync her ipod, it came back and said that 221 songs would be deleted from her ipod unless she authorized her account. The authorization window came up and the Apple ID it prestored was an email account she had years ago that she no longer has. My sense is that her ipod contains songs from 2 different itunes accounts. She does not know the password of this old account. I get prompted for "did you forget the password" and it says it is sending the password to the email address for the apple id. Problem is that email address does not exist anymore so I am stuck.
The best I can tell is that her old PC had both Apple IDs authorized and she has had that PC for years so her ipod and iphone has worked fine. Any idea how to get into the old Apple ID if we don't have the password. The other choice I see is to lose the 221 songs.
Thanks

Here's what you need to do. First plug the iPad mini into your computer. When you get the message about iTunes not being able to access the iPad because it's password protected, press and hold the power button and home button at the same time. Hold these buttons down all the way through the reboot until the apple goes away. After that you should a graphic of a USB cable and the iTunes symbol. When you see that release the buttons. Close out of the error message in iTunes. You should now be able to restore and update your iPad mini and set it up as a new device, or even restore it from your backup if you have one.

How to erase a Mac Pro for selling when you don't have the discs

I have a Mac Pro 1,1 that I'd like to sell, so I need to remove all information from the HD, BUT none of the disc I have seem to work to install from.
I have several Macs and so have a lot of discs.....but none of them will work when I restart holding down C, or Command + R.
I have gone to Disc Utility and can't select the HD to erase, because it seems to be greyed out.
I have on original discs:
10.0
10.4
10.4.7
10.5
10.5.6
10.6.3
all discs I either got with Mac's or purchased...!
What's the solution?
All I want is to be able to sell the machine with some working OS on it?
Thanks,
Alan,

Thanks Grant
The 10.6.3 disc would be the best. You will need a wired keyboard plugged directly into a USB port on the chassis, not on a display or any Hub.
I am using wired kb.
If you hold down Alt/Option key at Startup, that should invoke the Startup Manager, and slowly draw an icon for each potentially bootable Volume. Choose the one you want and tell it to proceed.
So, right after I hear the chime, I should hold down "option"? How long should this take? A few times the computer seemed to freeze when doing this, and I just held down the power button for 10 sec to start over (I had a grey screen for a few minutes)...other times, it seems to just bypass the whole option and just restart normally?
Answer only the "what language" question and do not install. Wait for the menuBar to be drawn, then choose Disk Utility off a menu.
Appreciate any other suggestions you may have, thanks,
Alan.

My measures for my tabular model don't display the totals any more next to the measure.

Similar Messages

Maybe you are looking for