My Media Browser in Garageband doesn't display anything except the very first song I have in this mac.

I have been always wanting to edit some songs and make a remix of it. However, the media browser in garageband in my macbook pro doesn't display any songs, except the very first song I added to my laptop. I have tried to do every suggestion from other forums (e.g. check the itunes library, etc) and none worked. One thing I realised is that I can still drag and drop the song directly from Finder to my Garageband timeline. Nevertheless, it annoys me whenever I open the media browser since this is not what my mac should do. I would be very grateful if someone could assist me with this matter.

Have you checked, if the search field at the bottom of the Media Browser is cleared? It should be set to "All", if you click the looking glass. Otherwise the list will be filtered.
And the drop-down menu should show "iTunes", if you want to see all songs.
If these simple measures do not help, try the fix for "oddball" problems and remove the User Preferences - see the FAQ:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)
Regards
Léonie

Similar Messages

Trying to set up time capsule with airport exteme. Apple advises to use manuel setup and click on Advanced. Then enter mobileme ID. I did this but Time Machine doesn't display anything on the capsule window.

Can't set up my time capsule on Airport Extreme (updated). Apple instructions are to use manual set up. Click on Advanced tab. Click on Mobileme and enter Mobileme ID and password. I did this. But Time Machine window is blank. Tryed to click on update window after entering Mobileme ID but Airport does not respond (turn of then on)

mickair wrote:
I have been experiencing some networking problems
Welcome to Apple's discussion groups.
I have the latest Time Capsule ("TC"), an old Airport Extreme Base Station ("AEBS") bought in 2007 and 2 Airport Expresses, one bought in 3 months ago ("AE-Alpha") and the other bought back in 2007 ("AE-Beta"). All of them have been updated with the latest firmware.
Based on those dates, the AirPort Extreme is probably flat (as opposed to dome-shaped), making it 802.11n-capable. The Newer AirPort Express is probably an 802.11n-capable model A1264, while the older one is probably a model A1084 or A1088.
I use {the TC's} DHCP function ... to avoid unauthorized use.
This a discussion for another thread, but that's not what DHCP is for.
The wireless setting for it is to participate as WDS Main, but after reading various posts, it seems WDS is a bad idea
With that older AirPort Express you're stuck with WDS unless you decide to replace it with a newer model.
The AEBS is currently setup as being a WDS Relay at the moment
Why a relay? That's only needed if there's another base station "beyond" it that is configured to depend on it.
Since the AEBS is connected to the TC via Ethernet, you should probably configure it as a "roaming network":
http://discussions.apple.com/thread.jspa?threadID=2273124
{The AE-Alpha} connects fine as WDS remote at the moment
I don't have any experience with mixed WDS and non-WDS networks, but since it's 802.11n-capable, you may be able to configure it to "extend" the network of the TC rather than as WDS. Look for a setting on the TC to "Allow this network to be extended".
Physical location:
AEBS in one end, TC and AE-Alpha in the middle while AE-Beta on the other end.
A device such as "AE-Beta" that's supposed to extend a network shouldn't be "at the end" but should be half way between the central base station and the clients that need an extended network.

Firefox doesn't display bookmarks in the sidebar, only in the menu bookmark. It doesn't display bookmarks in the "organize" bookmarks. It doesn't save tabs on exit. Problem began with 3.6.6

FF 3.6.6 doesn't display bookmarks in sidebar, but a search in the sidebar shows they are still there. It does display them from the menu bar. It doesn't display bookmarks in the "organize bookmark" display. It doesn't save tabs on exit. Doesn't save browser screen size.

With so many issues with your current profile it would be better to try a new profile.
Be careful with what you copy to that new profile and it sounds that at least you have problem with places.sqlite and maybe prefs.js and localstore.rdf as well.
First test that new profile without copying files and installing extensions.
Create a new profile as a test to check if your current profile is causing the problems
See [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

MSI 970a-g46 motherboard starts up but doesn't display anything.

Hello, I'm having problems with a new motherboard I got from Amazon, specifically the 970a-g46. The following are my specs in use with this motherboard:
CPU: AMD Phenom 2 x4 965
GPU: nVidia GeForce 560 GTX
Ram: 8gb Kingston HyperX Fury 1866mhz.
PSU: Corsair 650TX (650 Watts)
Compatability-wise, everything checks out so I wasn't expecting problems at first. All the other parts excluding the ram I've used before. Here's exactly what happens:
I power up the computer after everything is installed and connected. The 4 phase LEDs turn on which tell me the CPU is powered up and working (so I assume). I don't get any beeps or buzzs mainly because I don't see any speaker/buzzer on this board. The monitor blinks and while it is connected to my GPU, it doesn't display anything, it's just a black screen. I can leave it on for a few minutes and I'll still not see anything happen. An important observation here is that my keyboard which has LEDs will turn on after a short period of time in boot-up (with my older set-up that is). This does not happen ever regardless of how long I leave my computer on on this new mobo.
I've gone over and checked/tested numerous things:
* The PCI-E and ATX cables for the GPU, motherboard and CPU are all connected and secured (I've tried both 4-pin and 8-pin connections for the CPU, neither help).
* I've tried jumping the CMOS multiple times to no avail.
* I tested the ram on another computer and it worked just fine on that one.
* I've tested the motherboard without a GPU and it still does nothing (though I think that's because this motherboard doesnt have its own integrated GPU for some reason).
So far the only possible reasons why my computer is not working is because of my PSU (very unlikely as it's only a year old and it's a Corsair, which I've heard is very reliable in the long-run), GPU (It is quite a few years old but even without the GPU my computer still doesn't go past boot-up), CPU (possible due to its age and how many freaking time I've reseated it (probably around 8 times) so I wouldn't doubt it, but before I put it into this motherboard I did check its pins and they were all there and placed nice and smoothly into the socket.) and finally the motherboard (it's possible that this is just a defected motherboard and giving me a super hard time which would be a first in all the years I"ve spent computer building).
The best case scenario of course is me giving some kind of oversight to how I transferred over the parts and connectors. I might've missed something obvious to please any advice/insight on how I can solve this problem would be greatly appreciated
EDIT: Some other things I did but forgot to mention:
* Checked ground nut things and ensured they matched the specifications of the motherboard ATX; only 6 are under the board and each one is aligned up with the holes on the board as designed.
* Tried booting up without powering the CPU. Only one phase LED light came on, still the same problem (for an obvious reason this time now).
* Re-seated GPU multiple times, re-connected cables multiple times.
What I have NOT done is re-seat the CPU because I am almost out of acetone so I would need to get another supply of that which won't be until tomorrow. I also have not re-seated everything back on my older motherboard to check if it still works. Tomorrow I'll most likely do that and if I find that the old motherboard works flawlessly then that tells me that the new motherboard I got is either defected or there's some compatability issue I"m missed out on.
EDIT 2: Just found a speaker and plugged it into the motherboard. Booted it up and I got no beeps whatsoever. So this mobo is giving me no video activity (there is a signal it's just blank), and no beeps from the motherboard. I have no idea what that could mean at this point.
EDIT 3: I decided to test a few things with the new speaker I just got. First I removed ram and tried running, I got 3 beeps which I assume is the beep sequence of faulty/no ram. Removed the power to CPU and the GPU itself individually, gave no beeps this time.

Quote from: rhradacut on 06-January-15, 16:49:14
What's the serial number of your MB? Needed to determine what BIOS may be on the MB. Exactly which version of the CPU is it? There were several different 965 CPUs and they required different BIOS versions, 1.2, 1.9,2.2 depending on which CPU you actually have.
Also another problem may be that native memory supported by your CPU is DDR3-1333, not 1866
None of the supported CPUs have integrated graphics, any MB graphics would be in the chipset, not CPU. Examples would be 785G, 880G
Thank you very much rhradacut! The problem was that the mobo for whatever reason was forcing 1866mhz on my CPU when it only supported up to 1600mhz. I had to install a spare ddr3 module to downclock it so that I could access the BIOS and manually set the DRAM timing to 1600mhz for it to work. That's a very strange problem that I figured would've been auto-resolved by the hardware, and would also be a big problem if I didn't have any spare DDR3 ram to work with.
Once again thanks for helping out on solving my problem.

I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

If it won't turn on then the monitor is dead (power supply?, video circuits?). Not worth repairing.
If you have a new iMac then it has thunderbolt. So exactly what is that monitor you are trying to connect? For TB you can connect a mini-displayport monitor. Probably (not 100% sure with TB) can use dvi or vga too if you have the appropriate adapter.

Satellite M30X-111 screen doesn't display anything but external monitor works

My laptop screen just doesn't display anything (look like when the computer is off) but when I connect the external monitor, then the desktop will be displayed on that monitor. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.
I again have to plug in the external monitor, and after I tried to reboot, I keep pressing F8 but the start up mode doesn't come up, only the sound of when you keep pressing a button for too long beeps, however, the laptop monitor works again.
How do I fix this problem?

Hi
According to your first posting I presume that LCD display on your notebook is defective. If you can not see BIOS settings or Toshiba welcome screen there must be some display problem.
Experiment with external display is to be sure that graphic card is not responsible for that. In your case it works with external display and graphic card can not be responsible.
Like I said try to enter bios settings and report if you can see Toshiba welcome screen.

My 'clear history button is not working. When I click on it it doesn't do anything and the letter are gray instead if blue like usual. I've gone to every type of settings I can bit I don't know how to fix it. Please help .

My 'clear history button is not working. When I click on it it doesn't do anything and the letters are gray instead of blue like usual. I've gone to every type of settings I can think of but I don't know how to fix it. Please help .

T
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

HT1694 My hotmail access disappeared from my iPad. When I go to settings and click 'mail, contacts, calendars' the page freezes. It doesn't allow me to the account setting. Anyone have suggestions?

My hotmail access disappeared from my iPad. When I go to settings and click 'mail, contacts, calendars' the page freezes. It doesn't allow me to the account setting. Anyone have suggestions?

Your Settings app is crashing. Sometimes, the only way to fix this is by restoring the iOS software but hopefully it will not come to that.
1. Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
2. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6 and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previou

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.

iTunes 10.7 is compatible with Snow Leopard.
You can download it here: http://www.apple.com/itunes/

I'm having problem with text boxes. Whenever i hit the enter button to start a new line or paragraph, the cursor doesn't drop down to the next line. Instead i get this little red + sign in the box.

I'm having problem with text boxes. Whenever i hit the enter button to start a new line or paragraph, the cursor doesn't drop down to the next line. Instead i get this little red + sign in the box.

You are absolutely right. Thought Enter meant Enter. I was wrong. Thank you for the help.
Rod Rogers, Broker
Accredited Land Consultant (ALC)
Metcalf Land Company, Inc.
Office: 864-585-0444
Mobile: 864-316-0297
Fax: 864-583-6000
<http://www.metcalfland.com> www.metcalfland.com

I was using iMovie yesterday and it was working. But today when it started it doesn't show anything in the window on the left. No events, no projects, nothing. It's blank and so is the rest of the screen. Does anyone know what my problem might be?

I was using iMovie yesterday and it was working perfectly. But today when it started it doesn't show anything in the window on the left. No events, no projects, nothing. It's blank and so is the rest of the screen. Does anyone know what my problem might be?
Where does the imovie.library reside? where do the events and projects reside?

Hi winkydb,
Thanks for visiting Apple Support Communities.
If you do not see the events or clips you were working with previously, first see if you can switch back to the library you were using with this method:
Show or hide the Libraries list
You select libraries and events in the Libraries list.
To show the Libraries list: Click the Show button on the left side of the toolbar.
The default location for iMovie libraries is the Movies folder in your home folder.
You can find this information here:
iMovie (2013): Work with multiple libraries
http://support.apple.com/kb/PH14745
Best Regards,
Jeremy

My iPod syncs, but doesn't save ANYTHING on the iPod

Basically, my iPod syncs, but doesn't save ANYTHING on the iPod, its the first iPod I have used and it really annoys me... I have tried pretty much everything :@
Help?!

Hello JellyPopJade,
And welcome to Apple Discussions!
How do you have your iPod configured to sync with your iTunes library? Automatically or do you manually manage its contents by dragging what you would like from your library to the iPod.
If you have it set to automatically sync all checked songs and videos, make sure each track you wish to sync to your iPod is checked within your iTunes library.
Under the Summary tab for your iPod, is there any space taken of by the "Other" category (orange)?
B-rock

My Disk Utility window doesn't look anything like the one in the Help file

My Disk Utility window doesn't look anything like the one in the Help file. It is missing the top row of icons (Burn etc.) What happened?

Nevermind - I found the "Show Toolbar" Command.

My laptop doesn't show anything but the mouse after the logon page at windows 8.1

my laptop doesn't show anything but the mouse after the logon page at windows 8.1..Acer E5 473G 57QQ

Hi there! When I read your post, I realized that a clean boot or a safe mode might help. I suggest you read the articles on them if you are not familiar. However, a legacy boot menu to enter a safe mode is unfortunately difficult in windows 8.1 as revealed in method 5 of the following article http://www.7tutorials.com/5-ways-boot-safe-mode-windows-8-windows-81 I am sorry that I was unable to provide a solution directly but hope that this reply will give a direction..............

HT4352 I have turned home share on my iPhone and my Apple TV and the remote app doesn't work all of the sudden. How can I fix this?

I have turned home share on my iPhone and my Apple TV and the remote app doesn't work all of the sudden. How can I fix this?

Welcome to the Apple Community.
Have you updated to the latest version of the Remote App.

My Media Browser in Garageband doesn't display anything except the very first song I have in this mac.

Similar Messages

Maybe you are looking for