My MG6320 will not print a copy.

My MG6320 will not print a copy. It will print from my PC and it will scan. But when I try to print a copy I get an error message that tells me I am out of paper, but I am not. Anyone experience something like this or know of a solution?
Thanks
Solved!
Go to Solution.

Hi Rich69427,
You will want to ensure that the page size and type selected on the printer matches the size and type of paper you are trying to copy on to try and resolve the issue. To change the page size and type selected when copying, please follow the steps located here.
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

HP Photosmart 6510 not printing or copying

I have an HP Photosmart 6510 printer that will not print or copy correctly. So far, I have cleaned the printhead which did not do anything and tried to align the printer cartridges but that has failed. Now what can I do?

Hello @LizardLover,
Welcome to the HP Forums!
I understand your Photosmart 6510 is not printing or copying correctly. I will do my best to assist you! Just to clarify, are you unable to print or copy black or color ink?
Make sure you have followed this entire HP document on Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems. Please make sure this printer is plugged into a direct wall, not a surge protector. I just want to see if this makes a difference. I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

LaserJet 5000 will not print more than one copy at a time.

We have recently moved our office. A LaserJet 5000 which is used as an office printer is shared through one of the computers on the network in the exact same way it was more we moved. But since the move it will not print multiple copies of the same document no matter how many copies the software tells the printer to print it will only print one copy then it stops. Before the moved it worked fine. If the software program such as Word told it to print 100 copies it printed 100 copies now one is the limit. So if you want to printmore than one you have to hit print that many times. It has 172 MB RAM. Does anyone have any ideas of what might have happened????

I have the same issue with a photosmart 2410xi. Did you ever get yours figured out?

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time. This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail! Any help?

The cyan portion of the printhead may be clogged. I would suggest running the diagnostics shown here. If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp 1050 will not print more than one copy at a time

hp 1050 will not print more than one copy at a time

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

I have a MG6320 Printer. It will not print the contents of an email, only the outline

I have a Canon MG 6320 printer. When I call up an email in GMail, it will not print the contents of the email, only the words and figures displaye don rails down the side and at the top. Can anyone tell me what I can do to change this?
James O'Shea

Hi JOShea432,
In order to assist with this issue we will need more information. Is the problem only occuring in Gmail? If so, are you using the print button from within Gmail or are you using the print option under the File menu in your web browser?
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My photosmart D110 printer will not print at all wireless or when connected; the printer will copy .

My D110 Photosmart printer will not print when I want to have something printed from my laptop; I have made sure everything was connected. I have lost the the disk that came with it. Please help the serial# {Removed for privacy}
Thank You, Kevin Jackson

What operating system? Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp 1315 will not print with 10.6.7

I cannot find any answers to this strange set of circumstances.
I had an old iMac and an hp 1315 all-in-one printer, and everything worked fine. I recently bought a new iMac with OS 10.6.7, and, rather than reinstalling the printer software, I just plugged the old printer into the USB port on the new iMac. The printer worked fine but the device would not scan. I have since learned that 10.6.7 supports printing ONLY on this device. So far so good, but this is where things get strange.
I wanted to scan some pictures, so I got out the old software CD that came with the printer and installed it in my new iMac. The result was that the device was now able to scan. I was happy about this until I discovered that the 1315 now will not print. I have done everything I can think of, including:
-- uninstalling the hp software
-- downloading the most recent driver from the HP website
-- deleting the printer from the Print & Fax window and then adding it again
-- running the "Reset Printing System" on the Print & Fax window
-- running "Software Update"
-- unplugging, replugging, restarting, etc.
-- running the test page on the printer
-- using the device to copy (i.e., using it separate from the computer)
-- checking to see that there are no lights blinking on the device and that it has toner and paper
The Print & Fax window shows me that my 1315 is "Idle" and is the "Last Printer Used," and it has the green light next to it that should indicate that there are no issues with the printer. But when I try and print something, it doesn't print, and the job status is simply "Error."
I am fine with using this device as a printer only, like I did up until yesterday. I have another scanner, and if I had known this would happen I would used it and would never have touched the 1315 or messed with its scanning function.
I must be able to print things for my business. Can anyone help me.

Download and use the updated HP software from their web site, don't use the disk.
You might have to perform some of the steps here, including trying a new user and #18 Resintall Just OS X to kick out the traces
Step by Step to fix your Mac

HP Officejet 4360 e-All-in-One Series - Will scan but will not print

So I have installed my new wireless printer and it will scan, both on USB and wireless, but it will not print. During the install process, at the very end of step 3, it says that it can't find an internet connection then prompts to copy a URL for completion of install online. The link takes me through the same install process.
When trying to print there is an error that says that it will not print due to a problem with the current printing setup. HP Print and Scan doctor lists all ok. The internal print test page works but the test page doesn't. It then prompts reinstall. So far I have tried:
Reinstalling
Reinstalling after running disk cleanup
Reinstalling after with firewall turned off
Changing to a standard TCP/IP port
The problem is the same whether on USB connect or wireless.
I am about to throw this thing out the window. Any ideas to save its life?

Hi @gesus,
Welcome to the HP Forums!
I understand that you can scan but not print with your HP Officejet 4630, on Windows Vista. I am happy to look into this printing issue for you!
Are you able to make copies? Copy Text or Mixed Documents.
In the meantime, I would recommend to go through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows Vista.
Let's start with that guide, and we will go from there!
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

K5400 will not print more than one page at a time.

The K5400 Office Jet Pro will not print more than one at a time when I change the number of pages to print in Printing Preferences. I have downloaded all the updates available and have tried many times.
Using a Windows XP SP3 computer.
Thank you, Marion

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

Have Photosmart Premium All-in-one, model c309a. Will not print a test page as the default printer.

Have gone through all diagnostics offered online by HP, but to no avail. Am hooked up wirelessly and all connections say OK. The print queue just keeps building up until i clear it. Have checked ink cartridges, power reset procedure and also the Embedded Web server, print driver and port,verified that is not paused or offline, restarted the print spooler, checked the software program and removed and reinstalled the HP software. It just will not print. Will copy but not print. Help!!

I have exactly the same problem here.
The printer is connected wirelessly to my router, which is connected with cable to my WinXP computer.
I can see the web server, all pages report everything is normal and ready.
I can ping from my computer to the printer.
I had no success getting the HP software on the CD to install, but the ~ 200 MB download version installed at least. However when the software probes to see what printers are available, it just doesn't see the printer (even though I can access its web server).
I finally got my wife's computer (Win 7 64 bit) to connect, but don't know exactly what I did to make that happen.
I noted that HP has a new version of firmware for the printer, so that will be tomorrow's project.

HP ENVY 5530 will NOT print in win 8.1

New HP ENVY 5530 wireless printer bought 2 days ago. Will NOT print a single document in Windows 8.1. It's scanning perfectly, I can also print from my Android HP eprint App perfectly. The printer is showing as connected and working properly (as evidenced by printing ability from other device).
The printer acknowledges I'm trying to print a Word doc, the printer message box, when clicked, shows me the document has been sent to the printer yet it sits there for about 3 - 4 seconds then ...DISAPPEARS and no document comes out the printer.
I have done everything I can think of....And, looking at the printer properties, it seems to have created its own dedicated Port which shows as "WSD...long number etc" Please help. Thanks!

UPDATE: I am utterly discouraged, frustrated and pretty annoyed now. Windows 8 and 8.1 are obviously the cause ofserious issues with HP ENVY 5530 (and other HP printers!) I have been on the phone since 11/26/13 and spoken to no less than 6 different people, one of which was a supervisor (Jay) at the HP Total Care Tech Support dept. My issue has slowly been escalated to the Lead Stream Dept. which was of no concrete help! I just got off the phone with one of the engineers (name: Sanal, in India) and he could not resolve the issue ater uninstalling, reinstalling and cleaning up the registry, checking the spooler etc etc. His advice was to call my ISP Comcast and get them to change the 'channel' to 11 as the printer works best under channel 11....?!?! WHY? I am not about to include another party to add to my issue! I think I need to take this printer back and buy one that I have researched and know for a fact works perfectly under Win 8.1!!!! I am so angry at this minute! How is this in god's name possible not to have a patch for this APPARENTLY COMMON issue your HP newer model printers are having with win 8 and 8.1??? I was reassured each and every time the issue would be resolved during each and every call I made! No one can resolve the inability of the printer and laptop to communicate. It shows are connected, online, functioning, is set up and installed properly.... it will scan, copy and even print docs from my Android YET NOTHING will print not even a test page from my Acer Laptop which is less than 10 months old!! HP scan doctor cannot figure out what is wrong either. Its test page does not print, yet its INTERNAL test page printed just fine. SMH.....sigh.....

HP Office Jet Pro 8610 will not print but will only fax

We have a HP Office Pro Jet 8610 and it worked fine until we hooked it up as a fax machine also on Thursday.
It used to copy, print, scan perfectly but we need a new fax machine so we went out and bought the phone cord and hooked up a fax line and telephone with built in answering to the Office Jet and the fax works , but now it will not print a document from Open Office to the printer because it tries to make a fax cover page.
I have run out of ideas can you please help?
This question was solved.
View Solution.

There are two "printer" drivers on there, to print, choose the "Officejet Pro 8610 Printer" instead of the "Officejet Pro 8610 FAX". You probably set the second one as default when the fax function is added, which is for PC fax. If you use the print function more often than fax, make the non-fax one the default printer.

New color laserjet pro mfp m177 will not scan or copy

Product is new. The problem is that this unit will not scan or copy. I downloaded the latest drivers, but they would not install completely. I also ran thru some trouble shooting guides on the HP website, but still it doesn't work. It tries to make a copy, but it acts like it starts and then stops without completing the function. It's almost like the scanner mechanism is stuck. Anyone ever have this problem with a brand new printer?

Hello , Thanks for posting in the HP Forums, and welcome! I understand you are unable to make a copy or scan on your new HP Color LaserJet Pro M177fw MFP. I'd like to help you with this. Firstly, do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers. If the issue persists, I would suggest download and installing the most recent firmware for your unit. You can download the firmware update utility here:HP Color LaserJet Pro MFP M177fw Firmware UpdateNote: You will need to connect the printer via USB to update the firmware, as any interruption during the firmware update can cause more issues. If this still does not resolve the issue, please let me know if you are getting some sort of error message on the screen or any blinking lights to indicate what the problem may be. Hope this helps!

MacBook Air will not print on wireless Epson printer. It says 'filter failed'

MacBook Air all of a sudden will not print on wireless Epson printer. The error message is 'filter failed'. Shut down everything and rebooted, but still not printing.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.

My MG6320 will not print a copy.

Similar Messages

Maybe you are looking for