My mic stopped working after i upgraded to Window 7 on my HP pavilion 6700

I upgraded my Vista to Window 7 (64 bit) on my HP Pavilion 6700, my speakers are working but my builit in mic has stopped working.
Can any body help me with this....
Thanks

I assume this is the add-on: https://addons.mozilla.org/en-US/firefox/addon/deskcut/
Which part isn't working: the item doesn't appear on the context menu, or no shortcut is created? If it doesn't appear, it might not be enabled. If the shortcut isn't created, there could be a problem with the path to the Desktop.
Try here:
orange Firefox button ''or'' classic Tools menu > Add-ons
Click Extensions and find deskCut. If it is disabled (grayed out), click Enable. If it is enabled, click Options, then Path and try changing it to a different folder, and then changing it back to your desired folder. Any luck?

Similar Messages

My camera connection kit stopped working after I upgraded to ios5

My camera connection kit stopped working after I upgraded to ios5. If I plug it in to my iphone I get a message saying it is not recognised, but when I plug it into the ipad it does nothing at all. I've tried resetting it, but that makes no difference.
I have an ipad 1 which I bought because it had lots of storage. I'm going on holiday soon, and I want to be able to upload my holiday photos to my ipad while I'm away.
Any suggestions?

Actually this sounds the same problem I have on my iPad2.
I use a cheap copy of the CCK which I got off eBay.
It worked great when fitted with a 16gb SD card, but since I upgraded to 5.01 it has stopped working.
Sorry, no solution at this point but it worked on 4.3.3 but not on 5.01.
I'll keep on looking, was considering a proper CCK thinking the cheapmversion may be drawing too much current, but it sounds like that might not work either.

SugarCRM stops working after Leopard upgrade

My local copy of SugarCRM CE 4.5.1 was working in Tiger before I upgraded to Leopard last week.
After the upgrade, SugarCRM complains with the following message:
=====
Warning: mysqli_connect() \[function.mysqli-connect\]: (HY000/2005): Unknown MySQL server host 'localhost:/tmp/mysql.sock' (1) in /Users/orest/Sites/ruby/ruby.sugarcrm_from-backup-20080813/include/database/Mys qliManager.php on line 419
Warning: mysqli_close() expects parameter 1 to be mysqli, boolean given in /Users/orest/Sites/ruby/ruby.sugarcrm_from-backup-20080813/include/database/Mys qliManager.php on line 444
Could not connect to server localhost:/tmp/mysql.sock as root.Unknown MySQL server host 'localhost:/tmp/mysql.sock' (1)
=====
A copy of PHPMyAdmin has not had any problems during the transition from Tiger to Leopard, nor have local copies of WordPress and Drupal.
Any advice would be appreciated. I'm new to the subtleties of Apache/PHP/MySQL on Leopard, so please be gentle.
Thanks.

Thanks for the swift response.
I'm familiar with the socket location issues with MySQL on Mac OS X. My local copies of WordPress and PHPMyAdmin both work with their configurations pointing to the socket at /tmp/mysql.sock. These installations were working, along with SugarCRM, before the Leopard upgrade. Only SugarCRM has stopped working after the upgrade.
Is there something I misunderstand about your pointer?
- O.

Mic stopped working after upgrading RAM from 2G to 8G.

Windows 7 64-bit Ultimate
Proc: Core2 E6800
MB: EVGA NF68 (nvidia 680i chipset)
2Gb of RAM?
Audigy 2 ZS
EVGA 8800GTX
Upgraded my RAM to 8G, mic stopped working. Pulled 2 sticks(4Gb), works. Pushed 2 sticks, broken...
Found this post:
<a rel="nofollow" href="http://forums.techguy.org/windows-xp/877634-solved-windows-sound-recording-stopped.html"]http://forums.techguy.org/windows-xp/877634-solved-windows-sound-recording-stopped.html[/url]
Apparently I'm not the only one?
Seems like a pretty silly problem. Having a TOM address above 4Gb blow the driver's mind?

: No, you're not the only one. As you can see <a rel="nofollow" href="http://forums.creative.com/t5/Windows-7/Audigy-2-ZS-with-Windows-7-64-Bit-and-more-than-4GB-of-RAM/td-p/53795;jsessionid=A339FB657638D20C9FF346FC283A37]here[/url].

"iTunes has stopped working" after i upgraded to iTunes 8

My itunes does not open anymore. when i turn on my computer, theres a pop-up message saying "ituneshelpermodule" has stopped working and when i open itunes, it pops up with a message saying "itunes has stopped working". I am running windows vista and i have tried re-installing itunes and it still doesn't work. Can somebody please provide me with a solution?
i even tried uninstalling itunes 8 and reinstalling itunes 7. when i did that, itunes 7 pops up with the same message also.
Thanks for your help!
Message was edited by: garyitsyu

has nobody had this problem before...?

USB scanner stopped working after PC upgrade

I have HP Officejet 4500 all in one printer. It has both USB and ethernet connections.
This week I have upgraded all PC components (so everything is new) except SSD drive so that I was able to continue where I stopped working.
However, my USB connection with printer stopped working.
First of all, I need to say, that I had to make scanner working over ethernet, so now my printer/scanner works without USB, but:
1. what may be the reason to stop USB connection working?
scanimage -L has usually expected output:
scanimage -L
device `hpaio:/usb/Officejet_4500_G510g-m?serial=CN141F219005CQ' is a Hewlett-Packard Officejet_4500_G510g-m all-in-one
but sometimes:
scanimage -L
and sometimes:
scanimage -L
device `hpaio:/usb/Officejet_4500_G510g-m?serial=0' is a Hewlett-Packard Officejet_4500_G510g-m all-in-one
When I try to scan over USB:
scanimage --format=tiff > test.tiff
scanimage: open of device hpaio:/usb/Officejet_4500_G510g-m?serial=CN141F219005CQ failed: Invalid argument
sometimes it stucks and sometimes:
scanimage --format=tiff > test.tiff
scanimage: open of device hpaio:/usb/Officejet_4500_G510g-m?serial=0 failed: Invalid argument
I have tried all steps on https://wiki.archlinux.org/index.php/Scanner site. I remind, that on the old PC it was working correctly. The problem appeared after upgrade.
2. The output of lsusb is:
Bus 001 Device 005: ID 03f0:2d12 Hewlett-Packard
When I try to connect to front USB 2.0 slot I get the following messages:
dmesg | tail
[ 832.202201] usb 1-8: hub failed to enable device, error -22
[ 832.362456] usb 1-8: new high-speed USB device number 8 using xhci_hcd
[ 832.362542] usb 1-8: Device not responding to setup address.
[ 832.566151] usb 1-8: Device not responding to setup address.
[ 832.769690] usb 1-8: device not accepting address 8, error -71
[ 832.929954] usb 1-8: new high-speed USB device number 9 using xhci_hcd
[ 832.930042] usb 1-8: Device not responding to setup address.
[ 833.133630] usb 1-8: Device not responding to setup address.
[ 833.337186] usb 1-8: device not accepting address 9, error -71
[ 833.337231] usb usb1-port8: unable to enumerate USB device
and no HP printer appears with lsusb.
When I connect it to the front USB 3.0 printer is recognised:
dmesg | tail
[ 832.769690] usb 1-8: device not accepting address 8, error -71
[ 832.929954] usb 1-8: new high-speed USB device number 9 using xhci_hcd
[ 832.930042] usb 1-8: Device not responding to setup address.
[ 833.133630] usb 1-8: Device not responding to setup address.
[ 833.337186] usb 1-8: device not accepting address 9, error -71
[ 833.337231] usb usb1-port8: unable to enumerate USB device
[ 918.254638] usb 1-12: new high-speed USB device number 10 using xhci_hcd
[ 918.429771] usblp 1-12:1.1: usblp1: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2D12
[ 919.469924] usblp1: removed
[ 919.470610] usblp 1-12:1.1: usblp1: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2D12
Bus 001 Device 010: ID 03f0:2d12 Hewlett-Packard
I don't have any such problem with rear USB.
All other USB devices work with front USBs. (wireless mouse, USB external HDD, USB CD/DVD, bluetooth dongle).
Can anybody explain me these issues please?
Thanks a lot.

This is the full output of lsusb -v :
Bus 004 Device 002: ID 8087:8001 Intel Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x8087 Intel Corp.
idProduct 0x8001
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 0 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.17
iManufacturer 3 Linux 3.17.6-1-ARCH ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x02
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0507 highspeed power suspend enable connect
Port 2: 0000.0100 power
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
Bus 003 Device 002: ID 8087:8009 Intel Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x8087 Intel Corp.
idProduct 0x8009
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 0 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.17
iManufacturer 3 Linux 3.17.6-1-ARCH ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1a.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x02
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0507 highspeed power suspend enable connect
Port 2: 0000.0100 power
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 3.17
iManufacturer 3 Linux 3.17.6-1-ARCH xhci_hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:14.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Hub Descriptor:
bLength 12
bDescriptorType 42
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
bHubDecLat 0.0 micro seconds
wHubDelay 0 nano seconds
DeviceRemovable 0x00
Hub Port Status:
Port 1: 0000.02a0 5Gbps power Rx.Detect
Port 2: 0000.02a0 5Gbps power Rx.Detect
Port 3: 0000.02a0 5Gbps power Rx.Detect
Port 4: 0000.02a0 5Gbps power Rx.Detect
Port 5: 0000.02a0 5Gbps power Rx.Detect
Port 6: 0000.02a0 5Gbps power Rx.Detect
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 15
bNumDeviceCaps 1
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x02
Latency Tolerance Messages (LTM) Supported
wSpeedsSupported 0x0008
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 3
Lowest fully-functional device speed is SuperSpeed (5Gbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 512 micro seconds
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
Bus 001 Device 004: ID 040b:2011 Weltrend Semiconductor
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x040b Weltrend Semiconductor
idProduct 0x2011
bcdDevice 2.00
iManufacturer 0
iProduct 1 GiGa HiD
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 105
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 003: ID 0e8d:1806 MediaTek Inc. Samsung SE-208 Slim Portable DVD Writer
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0e8d MediaTek Inc.
idProduct 0x1806 Samsung SE-208 Slim Portable DVD Writer
bcdDevice 0.00
iManufacturer 1 MediaTek Inc
iProduct 2 MT1887
iSerial 3 S16B6YMF7009NZ
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 Default
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 2 SFF-8020i, MMC-2 (ATAPI)
bInterfaceProtocol 80
iInterface 5 6238--Storage
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 002: ID 1058:1100 Western Digital Technologies, Inc. My Book Essential Edition 2.0 (WDH1U)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1058 Western Digital Technologies, Inc.
idProduct 0x1100 My Book Essential Edition 2.0 (WDH1U)
bcdDevice 1.65
iManufacturer 1 Western Digital
iProduct 2 My Book
iSerial 3 57442D574341554630313130313431
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
Bus 001 Device 012: ID 03f0:2d12 Hewlett-Packard
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x03f0 Hewlett-Packard
idProduct 0x2d12
bcdDevice 1.00
iManufacturer 1 HP
iProduct 2 Officejet 4500 G510g-m
iSerial 3 CN141F219005CQ
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 108
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 204
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 7
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7 Printer
bInterfaceSubClass 1 Printer
bInterfaceProtocol 2 Bidirectional
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 212
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.17
iManufacturer 3 Linux 3.17.6-1-ARCH xhci_hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:14.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 14
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Port 4: 0000.0503 highspeed power enable connect
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0303 lowspeed power enable connect
Port 8: 0000.0100 power
Port 9: 0000.0100 power
Port 10: 0000.0100 power
Port 11: 0000.0100 power
Port 12: 0000.0100 power
Port 13: 0000.0100 power
Port 14: 0000.0100 power
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
The cable is quite long. It has about 1,5m. Unfortunatelly, I don't have another cable to test it. Strange is, it was working before....

Navigation and other features suddenly stopped working after I upgraded to FF4.

A day or two after I upgraded from FF 3.6 to FF4, all the ordinary navigation features stopped working. Backspace/alt-<, even the back and forward arrows, Crtl-R to reload a page, and the address field doesn't show the current URL unless I click the identify information icon. All very odd. None of the keyboard shortcuts work.
My bookmark toolbar does not load automatically, although I guess that Vista is the source of that issue.

Doing a downgrade is not anything I have done or feel comfortable with. Is there a clean procedure to accomplish this?

Incoming Emails stopped working after Sony Upgrade

Hi, yesterday I upgraded to the latest Sony software 12.1.A.1.205 and my Talk Talk emails have stopped working. I have been in touch with Talk Talk and my settings are correct - POP3 server - mail.talktalk.net, Port 110... My outgoing emails work absolutely fine. It happened immediately after the upgrade. I can see that that I currently have 57 emails to read on the the phone but it just won't display any at all after the upgrade. Any ideas would be most welcome. Thank you.

We appreciate you spending so much time with Apple trying to get your information and audio back. We want you to have a fantastic working phone so you can enjoy our wireless network for many more years. Did you have your information backed up before the update? You may be able to follow the steps at http://support.apple.com/kb/HT1414 to restore your iPhone to it's previous information-filled glory.
As for the volume, make sure to check inside the headset jack for any debris or corrosion. I've come across pocket lint in my headset jack that caused the phone to think I had headphones plugged in. If the jack is all clear, try playing any song from your Controller Center (Sliding from botton to top with the screen block) using the Earphones. Disconnect the earphones while the song's playing (the song will stop), and then press play again without the earphones in. This may help to trigger the phone to play sound normally. If not, when did you purchase your iPhone? Has there been any damage?
Thank you
JenniferH_VZW
Please follow us on Twitter @vzwsupport

Time Machine backup to my NAS drive (MyBookLive from WD) stopped working after Lion Upgrade

After my upgrade to Lion OS, I noticed that Time Machine backup failed to connect to my MyBookLive WD NAS drive. It was perfectly working while the machine was still on Snow Leopard. This is the error I am getting.
"The network backup disk does not support the required AFP features.
Open Time Machine preferences to select a different backup disk."
Any help with workaround would be greatly aprreciated. Thx for your help and support.

OK I ran into issues. I'm doing the play by play on Q18 for copying a locally connected backup to a network connected backup - so I start the backup with the backup disk connected to the TC and then stop it when the XXX of YYY copied shows up. I disconnect and connect the disk directly. The problem is I don't seem to have permission to mount the sparsebundle:
So I get info and click the lock and enter my admin password and change the everyone from no access to read and write. Then I try to open the sparsebundle and I get:
So I did that twice with the same effect. Then I noticed I can mount the sparsebundle if I leave it connected to the time capsule. So its mounted - good. Then I go into disk utility and try to erase the mounted "time machine backups" drive and it didn't like that much - I wish I took a screenshot but I didn't. It basically said I can't do that.
So now I don't know what to do. I'm currently starting a backup set fresh and this time letting it run to completion however I excluded my entire user account so the backup size is only 25 GB. When it finishes then maybe I can move the disk local and go in and see if I can mount the partition and erase the contents and copy over my backup file into the sparsebundle.
So does anyone know why I can't access that sparsebundle the way Pondini says I should be able to? Any suggestions? If my latest attempt doesn't work then I'll just do a full backup and say to heck with my history although that would be unfortunate.

Pm-utils stopped working after recent upgrade. [Solved]

Hi. After a recent upgrade my system, the pm-utils package stopped working. I can run pm-suspend and hibernate but nothing happens at all. Just a blank terminal screen appears. Were there any changes to the kernel that might have changed how it worked? It used to work fine before recently.
Last edited by semperfiguy (2008-10-21 21:56:13)

The update to the kernel made the package I was using for the ath_pci module not work. I had a hook in the suspend that would rmmod and modprobe that module. With the new upgrade I use the ath5k module now. So I just changed the file /etc/pm/sleep.d/12mod-ath_pci to reflect that change and it works great now. Thank You.

Transactional Iview stop working after SP18 upgrade

Hi SAP Expert
We've upgraded our Portal and R/3 backend from SP16 to SP18, after that we test all existing Transactional iview, we found all transactional iview stop working for 'SAPGUI for Windows', the SAP GUI splash screens will start but never login or start the specified transaction.
Strangely, if we changed the iview to 'SAPGUI for HTML' the SAPGUI will login fine.
Anyone experience similar issue? Anyone know of a work around?

Thanks Everyone,
I am testing the iview with SAPGUI 710 patch level 11, and I tried creating a new transaction iview with all the default settings, the result is the same.
I've logged an OSS message regarding this, haven't got the response yet. Any other suggestion?

In-line remote & mic stopped working after software update!

Hi guys. I don't know the proper name for it but you know the headphone jack on unibody MBPs is compatible with the iPhone headphones, which have remote and mic. You can make calls and control iTunes.
Shortly after the latest update which give you the App Store, the function has stopped working all together! Does anyone else have the same problem or am I an isolated case?

Try resetting the PRAM. Info here:
http://docs.info.apple.com/article.html?artnum=2238

Help please! Kyocera KM-3050 stopped working after ML upgrade

Hello Apple community,
We have a Kyocera KM-3050 that scans and prints. After upgrading all the iMac, Macbook Air and Macbook Pro laptops to Mountain Lion, we are unable to scan and send the documents to any of the Apple computers. Printing is still working perfectly, but scanning has absolutely stopped working. I don't know what to do. I can't find all the installers and I'm afraid to downgrade back to Snow Leopard without them. Ah, the time machine on all three computers have never been activated so there's no restore point. =(
Any suggestions on how to go around this? Thanks in advance!

SMB protocol is used by the Mac to connect to and from Windows computers. Typically the multi function devices use this protocol to connect to Windows shares, and with OS 10.6 and earlier, they could also use it to connect to a shared folder on the Mac.
If you are able to look at the address book in the MFD, this will give some insight into what protocol is being used. Often this can be done by entering the IP address of the MFD into a web browser which connects to the internal web site of the MFD. From here there should be links to the address book where you can register and edit an address for the send function.
For the example you give to the iMac, if the address book may show smb:\\192.xxx.xxx.xxx\sharename, where 192.xxx.xxx.xxx is the iMac's IP address and sharename is the shared folder name where the document is sent to on the iMac. It may also not show SMB at the beginning, but will show SMB as the protocol being used. The image below is an example from the address book of a Canon imageRUNNER MFD. Note that the protocol is shown as "Windows (SMB)".
As for the FTP support, one way to check is via this address book view. With the example above, I can change the protocol drop menu from Windows (SMB) to FTP. If you can see this same view in the Kyocera then this could help identify that the device supports the FTP protocol for sending documents.

Hdmi sound on my mac mini has stopped working after I upgraded the OS

I just upgraded the iOS on my Core i5 Mac mini to 10.8.5 and my hdmi sound on my monitor stopped working. I have tried rebooting and adjusting the Audio midi settings and nothing seems to work. I know the mac mini speakers are working and the monitors speakers are working. What do I try next?

Resetting the NVRAM / PRAM, as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

Acrobat X Pro 10.1.12 (part of CS6 Design Standard) on Mac stopped working after OS upgrade to OSX 10.10

My Acrobat X Pro 10.1.12 stopped working, which I believe is related to my upgrade from OS X 10.9 to 10.10 recently.
Taking any action in a PDF document will result in an endless time-out of Acrobat Pro. The only solution is to kill the process via the operating system. I deinstalled, cleaned and reinstalled the whole CS6 suite. No change. Acrobat Pro became more or less unusable. Any ideas?
thx

Hello Mike Leber,
Please try un-installing and re-installing the product, it should resolve your issue.
You can follow below link to download CS 6 Design Standard and install Acrobat X Pro from the suite.
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Regards
Loveneeh

My mic stopped working after i upgraded to Window 7 on my HP pavilion 6700

Similar Messages

Maybe you are looking for