My microphone has stopped working and is making a hissing sound (msi L1350D windows 7)

please could someone tell me how to repair my microphone i have tried to deinstall the sound and reinstalled it but it did not work

If you have a passcode on the device and you don't know it, then thats another issue. For that, the ipad will need to be restored. This may or may not also resolve your mic issue.
You didn't say wether or not the mic fails with just this one app, or with facetime and skype as well.
Try this audio recording app if needed to test further
https://itunes.apple.com/us/app/audio-memos-free-voice-recorder/id304075033?mt=8
I'd stay away from using anything like a vaccuum on the ipad, but clean air might work
Try backing up the ipad to both icloud and itunes first.
iTunes: Backing up and Restoring iOS software
http://support.apple.com/kb/HT1414?viewlocale=en_US
About iOS backups
http://support.apple.com/kb/HT4946
After backing up your ipad, then try restoring it, first set up as a 'new' device.
If you have any issues with backing up or restoring then...
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US

Similar Messages

  • When i sync my phone it goes through all the photo's then a window pops up which says that itunes has stopped working and the closes itunes down, i have tried syncing a few times and it just keeps doing the same but says windows MAY send a solution, help

    i am getting really frustrated with syncing and updating my iphone, everytime i sync when the photo's have sunk a window pops up and says itunes has stopped working and closes the programme, it also says that windows may send me a solution but they never do !!!! please can someone help me

    Hello Suzanne,
    Thank you for providing the details of iTunes unexpectedly quitting.  You have taken some really good troubleshooting steps already.  I found an article with additional steps you can take to further isolate and troubleshoot an issue like the one you described:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I've had my iPod 5th gen for a few months now and out of nowhere the microphone has stopped working.

    I've had my iPod 5th gen for a few months now and out of nowhere the microphone has stopped working. It won't pick up anything, I can't use it for recording, face time, siri or anything else. Every time I try and record and play it back its just all fuzzy, is there anyway of fixing it without having to send it off for repair?

    - Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the tope edge near the center.
    - Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                 
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       
    You can also send it to Apple.

  • I have updated with os X 10.10.2 and my built in microphone has stopped working. need immediate solution for this.

    Currently I own 13.5" Macbook Air (mid 2012) with OS X 10.10.2 running on it. Ever since I upgraded to it, the built-in microphone has stopped working.
    I made Facetime calls but my voice was not able to transfer/hear on the other side. Moreover i tried checking the "Sound Input levels" in the System Preferences and they all are perfect. When i speak the volume recognition bars does not show any movement or change, indicating no Input Volume.
    Kindly look into this matter and take necessary steps to resolve this issue.

    To add to David Woods comment, make sure your Audio MIDI app is running the latest 4.3.0 found in  Audio MIDI>Preferences> info>Core Audio Framework 4,3.0

  • My microphone has stopped working on my ipad 2 16GB 3G.  How do I get it to start working again?

    I am not sure when it happened but my microphone has stopped working on my ipad 2.  I downloaded an application from the App Store called Starmaker for my daughter.  When she tried to follow the start up instructions, she could not make a demo recording as there is no sound.
    My daughter and I have used the recording/sound facility before as, when away from, I have used Skype and my daughter has used the talking animal apps.
    I have tried a hard reset and tried to clear the microphone by blowing on it and using the hoover attachment to clear it but unfortunately there has been no difference. 
    I would be grateful for any advice you have to clear this problem, so I can have the full use of my ipad again.
    Thank you.
    Becva5

    If you have a passcode on the device and you don't know it, then thats another issue. For that, the ipad will need to be restored. This may or may not also resolve your mic issue.
    You didn't say wether or not the mic fails with just this one app, or with facetime and skype as well.
    Try this audio recording app if needed to test further
    https://itunes.apple.com/us/app/audio-memos-free-voice-recorder/id304075033?mt=8
    I'd stay away from using anything like a vaccuum on the ipad, but clean air might work
    Try backing up the ipad to both icloud and itunes first.
    iTunes: Backing up and Restoring iOS software
    http://support.apple.com/kb/HT1414?viewlocale=en_US
    About iOS backups
    http://support.apple.com/kb/HT4946
    After backing up your ipad, then try restoring it, first set up as a 'new' device.
    If you have any issues with backing up or restoring then...
    Unable to update or restore
    http://support.apple.com/kb/HT1808?viewlocale=en_US

  • HT201412 My microphone has stopped working:

    My microphone has stopped working so I am unable to use faceTime, Siri etc. I have tried restoring it and turning it on and of but none of these seem to resolve the issue is there anything you would recommend to help or just any useful advise?
    Thank you.

    If you have a passcode on the device and you don't know it, then thats another issue. For that, the ipad will need to be restored. This may or may not also resolve your mic issue.
    You didn't say wether or not the mic fails with just this one app, or with facetime and skype as well.
    Try this audio recording app if needed to test further
    https://itunes.apple.com/us/app/audio-memos-free-voice-recorder/id304075033?mt=8
    I'd stay away from using anything like a vaccuum on the ipad, but clean air might work
    Try backing up the ipad to both icloud and itunes first.
    iTunes: Backing up and Restoring iOS software
    http://support.apple.com/kb/HT1414?viewlocale=en_US
    About iOS backups
    http://support.apple.com/kb/HT4946
    After backing up your ipad, then try restoring it, first set up as a 'new' device.
    If you have any issues with backing up or restoring then...
    Unable to update or restore
    http://support.apple.com/kb/HT1808?viewlocale=en_US

  • Microphone has stopped working in apps

    Hi,
    I have an iPhone 4S and the microphone has stopped working in my apps, such as snapchat, when takign a video in the camera, instagram etc. I've just looked in the microphone settings and all of those apps have permission to use the microphone. The strange thing, though, is that it works when I make a phonecall (people can hear me) and Siri also understands me! I have tried switching the phone on and off again.
    Thanks

    Hi wheelybin92,
    Thanks for visiting Apple Support Communities.
    The iPhone 4S has two microphones, so the one used on phone calls may be working fine, but it sounds like the other microphone is no longer working. Take a look at this article for troubleshooting steps that can help:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Best Regards,
    Jeremy

  • When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

    When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • ITunes has stopped working and has to close message on Win 7

    When I plug my phone into the computer iTunes starts to open and then I get an error message that states iTunes has stopped working and has to close.  This seems to only happen while at work and not at home

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
    tt2

  • Itunes will not open on computer says it has stopped working and it must be closed. My computer tells me its an incompatible app. Is there a problem with the new itunes or is it my computer?

    I have recently downloaded the new itunes. My computer will open itunes but then a screen pops up that says Itunes has stopped working and must close. This happens every time and i can not by pass it. I am afraid all my music is gone as well. I found on my computer that its an incompatible app. What does that mean exactly? Was itunes installed incorrectly? I have had itunes on my computer before and worked just fine and had no problems. Is it possibly a computer issue or Itunes? Need help thanks

    Not completely sure. But if you think it is an iTunes issue...... follow through this: Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    ALSO, if you feel like all your music will be gone as well follow through these 2:
    > Downloading past purchases from App Store, iBookstore, and iTunes Store
    > How to use your iPod to move your music to a new computer
    IF YOU THINK ITS A COMPUTER ISSUE, RESTART YOUR COMPUTER BEFORE DOING ALL THIS.

  • Everytime I open up itunes I can listen to my music, but one I connect it to my IPod, it says "ITunes has stopped working" and then it shuts down. How do I fix this problem?

    Everytime I open up Itunes I can listen to my music, but once I connect it to my IPod, it says "ITunes has stopped working" and then ITunes ***** down. How do I fix this problem?

    Hi The Funkster,
    The resource below will provide some initial troubleshooting for the issue you are having uploading songs and artwork to iTunes Match.
     How to troubleshoot iTunes Match - Apple Support
    http://support.apple.com/en-us/TS4054
    I hope this information helps ....
    - Judy

  • Itunes launches fine however I cannot connect to the Itunes store.  It says that Itunes has stopped working and windows is looking for a solution.

    Everything seems fine until I try to access the ITunes store.  Then I get a message that ITunes has stopped working and that Windows is looking for a solution.  Then it tells me that no solution has been found and closes down Itunes.
    I can still sync music / podcasts to my ipod and iphone.  I am still getting podcast downloads automatically for the ones I have subscribed to.
    This is the first time this issue with not being able to access the Itune stores has happened to me.  I was just there 2 nights ago.

    Hello notime4,
    The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Allen

  • Unable to install Adobe Digital Reader 3.0. Keep receiving error message "migration has stopped working" and then installation fails.

    Every time I try to install Adobe Digital Reader 3.0 I get an error message "migration has stopped working" and the installation fails. Is there a solution to this?

    Trying to install. Installation fails and I am unable to open it to migrate
    epub books to transfer to ereader
    In a message dated 8/31/2014 9:50:51 A.M. Eastern Daylight Time, 
    [email protected] writes:
    Unable  to install Adobe Digital Reader 3.0. Keep receiving error message 
    "migration has stopped working" and then installation fails.
    created by kglad (https://forums.adobe.com/people/kglad)  in 
    Downloading, Installing, Setting Up - View the full  discussion
    (https://forums.adobe.com/message/6688648#6688648)

  • My iTunes isn't playing a movie, how do I fix it? I've rented a movie from iTunes on my PC but every time i try to play it, a notification appears saying that iTunes has stopped working and it closes the program.

    I've rented a movie from iTunes on my PC but every time i try to play it, a notification appears saying that iTunes has stopped working and it closes the program...how do I fix this???

    Try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?

    I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?

    I have also retarted twice...

Maybe you are looking for

  • Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP

    Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP E1EDK14 occurs 4 times in the source sys: 1   E1EDK14-QUALF = '014'      E1EDK14-ORGID = 'YP01'      <=  purchase organization 2   E1EDK14-QUALF = '009'      E1EDK14-ORGID = '001'      <=  pur

  • Using HP Scan Pro 7.4.5 To Create Multiple-page PDFs

    I can scan in the first page fine, but when prompted as to whether I have any further pages of my document to add, HP Scan Pro won't give me a preview of subsequent pages. Any tips? Andy

  • Regarding xi calls rfc

    i am gonna call rfc by using xi's rfc adapter. how to debug the function module. such as: i wanna check whether the value xi transfers by using rfc adapter to call rfc is correct or not. how to debug in the function module?

  • Documentation of Crystal Report Template

    We're using several developed Crystal Report (V11) RPT files. Is there a way to document the contents of what is contained in each RPT (Sections, Variables used, SQL used, etc)?

  • Essbase DataExport to relational: where to define the dsn?

    I am running Essbase 11.1.1.2, and using DataExport in a calc to generate a flat file. Now I want to push the data into a relational table using: DATAEXPORT "DSN" "dsnName" "tableName" "userName" "password" What do I need to do to get the 'dsnName' r