My microphone has stopped working on my ipad 2 16GB 3G.  How do I get it to start working again?

I am not sure when it happened but my microphone has stopped working on my ipad 2.  I downloaded an application from the App Store called Starmaker for my daughter.  When she tried to follow the start up instructions, she could not make a demo recording as there is no sound.
My daughter and I have used the recording/sound facility before as, when away from, I have used Skype and my daughter has used the talking animal apps.
I have tried a hard reset and tried to clear the microphone by blowing on it and using the hoover attachment to clear it but unfortunately there has been no difference. 
I would be grateful for any advice you have to clear this problem, so I can have the full use of my ipad again.
Thank you.
Becva5

If you have a passcode on the device and you don't know it, then thats another issue. For that, the ipad will need to be restored. This may or may not also resolve your mic issue.
You didn't say wether or not the mic fails with just this one app, or with facetime and skype as well.
Try this audio recording app if needed to test further
https://itunes.apple.com/us/app/audio-memos-free-voice-recorder/id304075033?mt=8
I'd stay away from using anything like a vaccuum on the ipad, but clean air might work
Try backing up the ipad to both icloud and itunes first.
iTunes: Backing up and Restoring iOS software
http://support.apple.com/kb/HT1414?viewlocale=en_US
About iOS backups
http://support.apple.com/kb/HT4946
After backing up your ipad, then try restoring it, first set up as a 'new' device.
If you have any issues with backing up or restoring then...
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US

Similar Messages

  • HT201412 My microphone has stopped working:

    My microphone has stopped working so I am unable to use faceTime, Siri etc. I have tried restoring it and turning it on and of but none of these seem to resolve the issue is there anything you would recommend to help or just any useful advise?
    Thank you.

    If you have a passcode on the device and you don't know it, then thats another issue. For that, the ipad will need to be restored. This may or may not also resolve your mic issue.
    You didn't say wether or not the mic fails with just this one app, or with facetime and skype as well.
    Try this audio recording app if needed to test further
    https://itunes.apple.com/us/app/audio-memos-free-voice-recorder/id304075033?mt=8
    I'd stay away from using anything like a vaccuum on the ipad, but clean air might work
    Try backing up the ipad to both icloud and itunes first.
    iTunes: Backing up and Restoring iOS software
    http://support.apple.com/kb/HT1414?viewlocale=en_US
    About iOS backups
    http://support.apple.com/kb/HT4946
    After backing up your ipad, then try restoring it, first set up as a 'new' device.
    If you have any issues with backing up or restoring then...
    Unable to update or restore
    http://support.apple.com/kb/HT1808?viewlocale=en_US

  • I've had my iPod 5th gen for a few months now and out of nowhere the microphone has stopped working.

    I've had my iPod 5th gen for a few months now and out of nowhere the microphone has stopped working. It won't pick up anything, I can't use it for recording, face time, siri or anything else. Every time I try and record and play it back its just all fuzzy, is there anyway of fixing it without having to send it off for repair?

    - Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the tope edge near the center.
    - Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                 
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       
    You can also send it to Apple.

  • My internal microphone has stopped working. Help!

    Hello
    My internal microphone has stopped working! Is there anything that I can do?!
    Help!

    First check System Preferences/Sound - check all the settings to make sure mute is not selected.
    Repair permissions & restart.
    Troubleshooting issues with no audio from built-in speakers on Macs
    Open up GarageBand if installed then, open a program (optional).
    Quit out of the GarageBand app.

  • I have updated with os X 10.10.2 and my built in microphone has stopped working. need immediate solution for this.

    Currently I own 13.5" Macbook Air (mid 2012) with OS X 10.10.2 running on it. Ever since I upgraded to it, the built-in microphone has stopped working.
    I made Facetime calls but my voice was not able to transfer/hear on the other side. Moreover i tried checking the "Sound Input levels" in the System Preferences and they all are perfect. When i speak the volume recognition bars does not show any movement or change, indicating no Input Volume.
    Kindly look into this matter and take necessary steps to resolve this issue.

    To add to David Woods comment, make sure your Audio MIDI app is running the latest 4.3.0 found in  Audio MIDI>Preferences> info>Core Audio Framework 4,3.0

  • Microphone has stopped working in apps

    Hi,
    I have an iPhone 4S and the microphone has stopped working in my apps, such as snapchat, when takign a video in the camera, instagram etc. I've just looked in the microphone settings and all of those apps have permission to use the microphone. The strange thing, though, is that it works when I make a phonecall (people can hear me) and Siri also understands me! I have tried switching the phone on and off again.
    Thanks

    Hi wheelybin92,
    Thanks for visiting Apple Support Communities.
    The iPhone 4S has two microphones, so the one used on phone calls may be working fine, but it sounds like the other microphone is no longer working. Take a look at this article for troubleshooting steps that can help:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Best Regards,
    Jeremy

  • So confused my card reader has stopped working again

    My card reader has stopped working again. It's done this before and I just uninstalled it and then downloaded and installed the Ricoh Driver from Toshiba's website and that fixed it right up.
    This time though it's not working. Here's the confusing part. When I download the Ricoh Driver and Open it it shows it's extracting the Ricoh Card Reader Driver which is good. Then the next screen says Welcome to the Logix Pro 500 Simulator Setup Wizard.
    Now Logix Pro is my dh's PLC/electrical program. Why are these getting crossed over? What can I do to fix my reader?
    I have the A305-S6905 with Vista.
    Thanks!

    Never mind! I figured it out. I was trying to download it with Firefox. I tried again using Internet Explorer and it works perfectly now!
    Thank goodness!

  • My sent messages in outlook for mac suddenly stopped syncing with my iPhone and iPad, all other folders work correctly. How can I get them to start syncing again?

    My sent messages in outlook for mac suddenly stopped syncing with my iPhone and iPad, all other folders work correctly. How can I get them to start syncing again?

    You can disable the Adobe Reader plugin in Firefox (Tools > Add-ons > Plugins) and use the external Adobe Reader application or Preview application instead.
    *Firefox > Preferences > Applications > Adobe PDF document : Use Adobe Reader
    PDF files may also be found under another entry like Portable document.
    *https://support.mozilla.org/kb/change-firefox-behavior-when-open-file

  • The movie I rented on iTunes has stopped right in the middle of the movie because it hasn't finished loaded.  How do I get it to start playing again before the rental expires?

    The movie I rented on iTunes has stopped right in the middle of the movie because it hasn't finished loaded.  How do I get it to start playing again before the rental expires?

    Hello zooeyme,
    I'd suggest reporting the issue to the folks in our iTunes Store.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Cheers,
    Allen

  • Just got a new 5c--the apps stopped downloading cause I wasn't connected to wi-fi. How do I get them to start downloading again?

    Just got a new 5c--the apps stopped downloading cause it wasn't connected to wi-fi. How do I get it to start up again?

    If you're downloading them as part of restoring and iCloud backup, sometimes turning the device off, then back on will restart the download.   Otherwise, you may need to stop the restore (Settings>iCloud>Storage & Backup, Stop Restoring), then erase the phone and restore the backup again.

  • Adobe Bridge CC has stopped working -again

    After many months of pain caused by Bridge CC not working it seemed to be cleared up in Sept '14. (I used just about every fix that was suggested incl. preferences changed to have no program load on startup, managing cache, etc.) I has been working flawlessly until today. My pc notified re: windows updates were ready to install. I cleaned my pc, closed all programs and installed 23 updates. (Win7, 64bit) Updates seemed to install cleanly but Bridge CC will not open and displays a white screen and the msg "Adobe Bridge CC has stopped working" This began immediately after the os updates were installed so I suspected that was the issue. I restored the pc to before the updates and CC will still not open (stopped) and in desperation I tried Bridge CS6. CS6 opened normally and I was able to open a folder. Touching the space bar should have opened the selected file to full screen image but instead I got the same error msg now saying Adobe Bridge CS6 has stopped working. I have the same programs on my laptop and CC opens and works properly. So that sounds like my pc and not Bridge is the problem but there is an incompatibility somewhere and I am stuck and my work is piling up as I speak. I need my bridge back!

    This problem has been solved by Microsoft, rebuilt Win7. I would like to delete my question to reduce clutter here but I don't know how to delete it. A moderator may delete this if they wish or someone can add to my reply and instruct me. Thanks!

  • Elements 10 Organizer has stopped working (again)

    Upgraded fromearlier version and successfully imported catalog.  Have been doing weeks worth of organizing, when this morning an album was open and I got some kind of corruption error message.  I repaired the catalog, despite being informed there was no corruption and,.when it completed, I began getting "Elements 10 Organizer has stopped working" errors from Windows 7.  From this point forward, the error occurs seconds after opening the organizer. I have tried deleting the psa.prf and status.dat, with no luck.
    I have also tried launing the organizer directly, also with no luck.  After reading several related posts, I am getting the sense that this product is now being sold without support, ala some 1980's software.
    Does anybody have a clue as to why this is happening?
    Thanks in advance.

    Several, and here are a few representative samples:
    From the Applications log:
    Faulting application name: PhotoshopElementsOrganizer.exe, version: 10.0.0.0, time stamp: 0x4e5e9821
    Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7ba58
    Exception code: 0xc0000005
    Fault offset: 0x00038da9
    Faulting process id: 0xb04
    Faulting application start time: 0x01ccb2ff2374f323
    Faulting application path: C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe
    Faulting module path: C:\Windows\SysWOW64\ntdll.dll
    Report Id: 4d1822fb-1ef3-11e1-95e8-782bcb9381eb
    -=-=-=-=-=-=-=-=-=-=-=-=-=-=-
    Faulting application name: PhotoshopElementsOrganizer.exe, version: 10.0.0.0, time stamp: 0x4e5e9821
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x69614d5c
    Faulting process id: 0x544
    Faulting application start time: 0x01ccb302d18f222e
    Faulting application path: C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe
    Faulting module path: unknown
    Report Id: 1411c0e8-1ef6-11e1-95e8-782bcb9381eb
    -=-=-=-=-=-=-=-=-=-=-=-=-=-=-
    Faulting application name: PhotoshopElementsOrganizer.exe, version: 10.0.0.0, time stamp: 0x4e5e9821
    Faulting module name: quartz.dll, version: 6.6.7601.17514, time stamp: 0x4ce7b99c
    Exception code: 0xc000001d
    Fault offset: 0x00064d5c
    Faulting process id: 0x314
    Faulting application start time: 0x01ccb303f87665d7
    Faulting application path: C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe
    Faulting module path: C:\Windows\SysWOW64\quartz.dll
    Report Id: 3bbc576d-1ef7-11e1-95e8-782bcb9381eb
    -=-=-=-=-=-=-=-=-=-=-=-=-=-=-
    Windows cannot access the file  for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Elements 10 Organizer because of this error.
    Program: Elements 10 Organizer
    File:
    The error value is listed in the Additional Data section.
    User Action
    1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
    2. If the file still cannot be accessed and
              - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
              - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
    3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
    4. If the problem persists, restore the file from a backup copy.
    5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
    Additional Data
    Error value: 00000000
    Disk type: 0
    From the System log:
    Faulting application name: PhotoshopElementsOrganizer.exe, version: 10.0.0.0, time stamp: 0x4e5e9821
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x69614d5c
    Faulting process id: 0xcbc
    Faulting application start time: 0x01ccb2e2ef95e251
    Faulting application path: C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe
    Faulting module path: unknown
    Report Id: 329f3f34-1ed6-11e1-bc0d-782bcb9381eb
    -=-=-=-=-=-=-=-=-=-=-=-=-=-=-
    Faulting application name: PhotoshopElementsOrganizer.exe, version: 10.0.0.0, time stamp: 0x4e5e9821
    Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7ba58
    Exception code: 0xc0000005
    Fault offset: 0x00038da9
    Faulting process id: 0x734
    Faulting application start time: 0x01ccb2e2274cc5cb
    Faulting application path: C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe
    Faulting module path: C:\Windows\SysWOW64\ntdll.dll
    Report Id: 6ffe240a-1ed5-11e1-bc0d-782bcb9381eb

  • Personas Rotator has stopped working, again

    Since downloading the latest Firefox, V? (not sure) Personas rotator has stopped working and the 'enable' button has disappeared. I had just got it working perfectly that only lasted a few weeks, then it just stopped.
    SlimSylv
    Oh, BTW, I'm running Windows XP Pro, V.5.1.2600 SP_3.0

    By stopped working do you mean frozen
    Sometimes people have found that performance increased by changing the Search behaviour
    Click on the arrow in the Search box and untick Search Entire Library

  • I have a 2009 A6 with a 5th Gen. iPod. I mostly listen to audio bks, not a lot of music. Often, the MMI starts on the first song on my iPod, therefore I don't know where I stopped in my 4-6 hr book.  How can I get MMI to start where I left off?

    I have a 2009 A6 with a 5th Gen. iPod pluggedinto the MMI.  I mostly  listen to audio books, not a lot ofmusic.  The books are 4-6 hours long, vs 4-6minutes with a song.  Often, but not always, when I start my A6, the MMI starts on the first song on my iPod, thereforeI don't know where I stopped in my 4-6 hour book.  How can I get the interface to stay stopped where I left off?  I have gone into iTunes and placed my current book as the first "song" on my iPod for ease of finding it, but often the MMI starts it over at the beginning.  Thank you if anyone has any experience with this.  My dealer in San Rafael, CA says they've never heard of this issue. 

    I think my iPod, which is an iPod touch 3rd generation , which is a lot different from a nano, which really makes it almost impossible for me to help you, which is why I suggested that you post your question in the iPod nano community.  Your first post says that your product is an iPod nano. I think the people who answer those questions would be most likely to help you. If yours isn't a nano then you can pick the right community from here. This community is really to answer questions about this forum, or issues that don't fit anywhere else.
    laverne's mom
    Message was edited by: laverne's mom

  • Satellite P200 - Microphone has stopped working after Windows 7 install

    My Satellite P200 came with Vista Ultimate, the mic worked for a few months suddenly it stopped. I decided to install Windows 7, but mic still does not work.
    Any ideas anyone?
    I use this laptop to skpe my folks a lot. I can use an external mic fine, but really want my inbuilt one working again.

    Hi buddy,
    Sounds like its something wrong with your Windows 7 installation if the microphone doesnt work anymore...
    I would recommend updating the webcam driver because the microphone is a part of it. You can find driver updates here:
    http://eu.computers.toshiba-europe.com
    I dont know what Satellite P200 you have exactly but if you cant find a Windows 7 driver for webcam, choose another model that is fully Windows 7 supported, e. g. Satellite P300.

Maybe you are looking for

  • Unable to install windows 8 on 2013 MBP

    So I got windows 8.1 DVD for running windows on my MBP 2013 with OS mavericks 9.1. But I'm stuck with this screen. I don't even know why I can't click "Install or remove winodws 7 or later version" it's greyed out wheather windows 8.1 DVD is coonecte

  • Deployment - reg

    Hi, I deployed my project in standalone server successfully by following the below document. ADF Deployment Guide: How-To Install & Configure WebLogic Server to Run ADF 11g Applications in Production An Oracle JDeveloper How-To Document Written by Da

  • Condition type at billing level

    hi all In condition type we keep maual entry allow "C"  . In sales order we enter basic price manually . We want that value can not changed at billing level How to do this ?

  • CS5 Bridge low on system resources

    Everytime I open CS5 bridge and work on my camera raw files I get the foloowing error message: bridge low on system resources and needs to be closed. I never had this problem in CS4. I am running Windows XP Pro with 4gb of ram. I have talked to Adobe

  • I have been trying to

    use the vi with PID control. Everything is working fine on the labview. However, when I get my ruler to measure really what happened in the experimental apparatus, I do get way off results from the VI results. Can the problem due to the real time iss