My microphone is not working but only for calls

I had my Iphone working perfectly until I updated to 4.3.1 after that I lost the microphone but only for calls when I use Skype, Video recording and may other features that uses microphone all of them worked. I did restore again to 4.3.1 and make a new fresh installation without recovering my data so now I'm not only without phone features but also need to load all of my data again. This occurs most of the time but about 2 of 10 calls the people can hear me so I think this must be related to baseband update or hadware issue.

Might try setting the option in System Preferences > Sound > Input tab > check "use ambient noise reduction"
Regards,
Captfred

Similar Messages

  • Imessage is not working, but only for one particular contact.

    I cannot send/recive imessages from one particular contact, messages are sent as SMS. All other contacts are fine with imessaging, so why just this particular one? Please help??!!

    If you can send imessage to other users execpt for this one particular person.  Then the issue would be with him/her and not your phone.  That person will have to figure out whats going on.

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  t worked, but only for those with PC.  I could not get it to work with Apple Yosemite even with reader installed .  is there a way i can make it work for apple /

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However,  I could not get it to work with Apple loaded with Yosemite even with reader installed .  Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
    Thanks

    LiveCycle = XFA forms.
    afaik - These cannot be used in Apple OSs.
    Be well...

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for thos

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for those with adobe pro.  i could not get it to work with reader.  is there a way i can make it work for reader?

    Noted.
    The LiveCycle user to user forum is across town at:
    Adobe LiveCycle 
    Be well...

  • Student account for Adobe CC - downloaded and worked but only for TRIAL - now asks for license - how do I access the programs? I was given a redemption code (apparently redeemed already). How do I get the licensing code?

    Student account for Adobe CC - downloaded and worked but only for TRIAL - now asks for license - how do I access the programs? I was given a redemption code (apparently redeemed already). How do I get the licensing code?

    Ask whom/wherever you got the redemption code from for one that has not already been used.

  • The wi-fi is working but I get I grayish screen when I use safari.  The touch screen is also not working but only on safari (well internet).  How do I fix that?

    Good day,
    I get a grayish screen when I access internet via my Ipad.  The touch screen is also not working but only with internet.  How do I fix that?
    thank you
    mélanie

    I have the same problem! Can anyone help us? Thanks!!

  • Siri does not work when used for calling a contact function

    Siri does not work when used for calling a contact function

    Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
    If it continues try to restore it.

  • My iPhone 4s cannot join a public unsecured network but my iPad and macbook can.  I have reset the network settings twice.  Both times it worked, but only for a few minutes.  What can I do?

    My iphone 4s cannot join a public unsecured network, but my ipad and macbook can with no problems.  I have reset the network settings on the iphone twice.  Both times that fixed the problem but only for a few minutes, then I get the "cannot join network" message again.  Please help!  What can I do?

    Anyone have any ideas or information to help with this?  Any help and consideration is MUCH appreciated.

  • Continuity:  Microphone does not work during Continuity/iPhone calls

    MacPro, Yosemite (10.10.2)
    iPhone 4S, 8.1.3
    Continuity has worked fine for me in the past.  However, I now have an issue where I can make calls from my Mac....they go through with trouble....but my microphone is not passed through to the call.  I can hear them...they cannot hear me.
    Voice-to-text, FaceTime, and Skype all work fine, so I know that my microphone is not having troubles.
    This is the first time I have used this since upgrading to 10.10.2 or ios 8.1.3.  So, possibly related...possibly not.
    Ideas?

    Errr.....sorry guys. I mis-typed something....
    When I make a call, it goes through WITHOUT any trouble.  No trouble that is except nobody can hear me.

  • My online number is working, but only for 10 secon...

    Hi,
    I purchased an online number today, its all setup and working, but I can't hold the call for longer than 10 seconds.
    It does not seem to be my connection, as a normal skype VIDEO call works perfectly.
    Im on a BT infinity fiber line at 40MB.
    It seems to timeout from the callers end.
    Please can I get some advise or have a technical engineer help resolve the issue?
    cheers,

    if this is a business connection your better off in the business forums

  • Spdif working but only for AC3/DTS, problem occured suddenly

    Hi all,
    My spdif output decided to stop outputting normal sounds. It will only work with AC3/DTS. This seemed to happen suddenly, one minute it was working and the next it wasn't. I hadn't changed anything with regards to the sound setup. IEC958 is unmuted in the Alsamixer app. Not sure what else to check. I think the problem occured when one of my apps crashed so maybe that has something to do with it but I tried rebooting, shutting down completely etc. I can't think of anything else to check.
    Any help would be greatly appreciated, this is a media computer and SPDIF is my only option for sound.
    Thanks,
    Kevin

    I forgot the power of ssh... The mplayer switches you suggested still result in 2ch. Here is the output of the alternative solution from the link you gave.
    $ amixer set 'IEC958' 100 unmute
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined cswitch cswitch-joined
    Playback channels: Mono
    Capture channels: Mono
    Mono: Playback [on] Capture [off]
    FYI: Every time I play something, IEC958 is muted again when I go into alsamixer.
    Last edited by gormine (2007-12-07 13:35:15)

  • Kerberos delegation works, but only for 10 hours

    Hi all - and please forgive in advance if this isn't the right forum for the question.
    I have an application service which watches for a file to be dropped and then calls a SQL stored procedure which does a bulk insert into the DB from the file using unconstrained delegation to impersonate the service account of the application.
    It worked fine in testing, and it worked fine when we tested during the prod deployment... but the next day, it failed!  The error is the ever-so-helpful:
    Cannot bulk load because the file "<FILEPATH>" could not be opened. Operating system error code 5 Access is denied. .Procedure , Line 1
    Even more odd, when we restarted the service and tried again, it succeeded.
    Through trial-and-error, we found that if we restart the application service *less than* 10 hours before the file is dropped, it succeeds.  More than 10 hours, it fails.
    So... I'm guessing Kerberos ticket expiration has something to do with this... but that's where I lose the thread.  Is there some way to avoid this error other than restarting the service every night?  I assume some kind of modification to the
    application which "exercises" the delegation rights on a regular basis?  Any solution which doesn't require a new app build?
    Thanks for any input.

    On Fri, 24 Jan 2014 02:36:00 +0000, JustTad wrote:
    Through trial-and-error, we found that if we restart the application service
    less than 10 hours before the file is dropped, it succeeds.  More than 10 hours, it fails.
    So... I'm guessing Kerberos ticket expiration has something to do with this... but that's where I lose the thread.  Is there some way to avoid this error other than restarting the service every night?  I assume some kind of modification to
    the application which "exercises" the delegation rights on a regular basis?  Any solution which doesn't require a new app build?
    You're on the right track as the default Kerberos ticket life time in
    Windows is 10 hours.
    I think that your only two choices are to restart the service or modify
    your code and recompile. For the latter option, you're going to have to
    post in an appropriate development forum (check the MSDN forums rather than
    the TechNet) as this forum is not for development support.
    Paul Adare - FIM CM MVP
    Real programs don't eat cache.

  • Access to a site from the Internet not working, but is for other sites on the same SP

    Greetings,
    My environment:
    SP 2013 Enterprise w/ SP1 installed
    2 servers in the farm, 1 for SQL, 1 for SP
    Both servers are VMs running on Hyper-V, SQL is a bit underpowered when it comes to memory, SP is fine
    5 web applications running, including a MySites web app and Central Admin (I've seen where separate web apps isn't the recommended configuration any more, but, this is how it was done when setup)
    All sites run using SSL (443), same NIC, using host headers, pretty standard stuff (I think)
    Claims authentication on all but Central Admin
    Central Admin is firewalled off to all but a select few
    1 to 1 correspondence between web apps and content databases
    Other than MySites, all sites have either 1 or 2 site collections (search is in a separate site collection on 2 of the sites); MySites has many more site collections
    So, site A, site B, site C, and site M are all supposed to be available from the Internet (with SSL and authentication) and also from the internal network. For site A, C, and M, this is true, no problem. Site B however doesn't work when coming in from the
    Internet, just internally. I've received multiple reports of this from some of my users around the country, and I've been able to replicate it on my computers.
    IIS just gives a blank page, no messages, no login. Chrome does present a login box, and will log into the site and work. This is from a laptop that is a part of our domain with cached credentials, but not directly connected to our network or using
    our VPN. A non-domain laptop without cached credentials prompts me to login, as it should, and seems to work. The domain laptop will use the cached credentials to auto-authenticate to A, C, and M, but not B.
    I'm using IE 11. I've tried putting the site into Compatibility mode, no joy. I've added the site to the Trusted Sites list, no joy. I don't have IE 10 available for testing (or 9 or 8 or ... just 11 :-(  ) I've flushed the browser cache, emptied the
    cookies, etc.
    So, 3 of 4 sites work fine on the same machine, same Internet connection, same browser, same SP. I'm thinking it's something with IE, but, what? Seems like IE should be sending the same creds to all the sites, as they're all in the same Internet domain.
    Does IE or Windows cache different creds somewhere? Or is there something in SP? I could see where one person's settings could get hosed somehow, but numerous people around the country with different h/w, different Internet connections, different credentials?
    ARGH! HELP!!! Point me at something to look at, because I'm drawing a blank (and getting permanent dents in my forehead from banging it on my keyboard)...
    Thanks much,
    Steven

    It seems that the difference between the sites that will open and the one that won't is the Default Authentication provider is set to NTLM on those that open, and Negotiate (Kerberos) on the one that won't. The Authentication Provider for the Default zone
    is Claims Based Authentication on all the sites, just site B (which won't open) is set to Negotiate (Kerberos), the others are set to NTLM.
    Short term: can I change the provider to NTLM without destroying the site?
    Long term: point me in the direction for setting up Kerberos correctly on my server/farm, as from what I can tell Kerberos is the recommended path forward. I'll setup a non-production test site and get it figured out.
    Thanks much.
    Steven

  • My volume doesn't work but only for music and apps; everywhere else it's normal. What can I do?

    my iphone is unable to play music out loud, and only works with the assistance of speakers or headphones. I know it can play out loud as the alarm/ringtone etc all work, and also when I put my phone in speaker docks, just before it connects it plays mystic out loud through the phone speakers. Just not when I want it to!! Any help would be much appreciated

    Jailbroken?

  • When defining the Outgoing SMTP Server, why does specifying the "default" SMTP server not work, but only the first server specified?

    I have several options for SMTP outgoing server. I set one to default and try to send. it fails and uses the first one in the list.
    I restart Thunderbird and try to send. It uses the first one in the list.
    I eliminate all SMTP servers from the list but the one I want, and it works.
    What am I missing, this I have observed this problem on all of my systems for a long time?
    Regards,
    Carl

    what your missing is that account have an SMTP sever associated with them, which if your "in" an account over rides the "default"
    Right click an account folder and select settings.
    Click on the account name in the settings and on the right is a drop down list and the "default" smtp for that account.

Maybe you are looking for