My microphone won't work when in Speaker mode, but will when in regular mode. What is up with that?

My iPhone's microphone will not work in the Speaker mode, but will when in Regular mode. The microphone works even when in bluetooth mode. This was sudden and no updates have been made recently, but it is up to date with the software.

I took it to the apple store and it was determined to be a mechanical problem. Since I had apple care, they replaced the phone.

Similar Messages

  • IMac G5 won't boot in normal and safe mode, but will from single-user mode

    Hello everyone,
    I'm quite new here, so I try to do my best if you have a question.
    Yesterday, someone nearby me had a iMac G5 (Powermac8,1), and he sayd, that the computer sometimes will boot, sometimes not.
    I did test it, I thought it was running fine, but when I played some music in iTunes, it was stuck on 9 seconds, and crashed (with a kernel panic). The guy also sayd, that there was nothing important on the computer, so a clean install was fine.
    Now, the problem is, that it will not boot in normal mode (without anything pressed on boot), also it won't in safe mode (shift-boot), but it will, when I enter single-user mode, mount the hard drive and exit from single-user mode so it will go futher on booting. Sometimes it will not, and immediately gives you a kernel panic in single-user mode, but it will 90 percent of the time.
    Then you've got another problem: when it's running in the normal desktop from single-user mode, it'll be stuck after some time again. If I look into the Kernel Panic file created, most times it's because of Spotlight indexing, so I disabled that.
    He also gave me the disks (Apple Hardware Test and Extra Applications, and iMac G5 Mac OS X Install Disks 1-3) that came with the Mac. He sayd that I could use them, but I think he didn't test out the SuperDrive, because when I insert a disk, it will try to read, but it will make 2 same sounds, and quits after 10 tries, when it will spit the cd out. Also normal (audio) disks.
    Also, I must hurry with the commands for mounting and exiting in single-user mode, or it will just not boot.
    In all cases, after 30-45 seconds from pressing the power button, the fan will start blowing at full speed, and it will stop after the exit command in Single-user mode. That's weird.
    I can't do anything with the SuperDrive, I can't normally boot in Mac OS X except for Single-user mode (but I don't think he would like to do that every time the computer boots up), and I have very limited time when Mac OS X arrived on the desktop.
    When booting in Verbose mode, it will be stuck on this:
    AppleSMU::PMU vers = 0x000d004c, SPU vers = 0x15, SDB vers = 0x01,
    (and sometimes ends with a kernel crash by fsck_hfs)
    Things I've tried (without any success):
    - /sbin/fsck -fy (in single-user mode)
    - Disabling Spotlight and mds
    If you want some more information, feel free to ask!
    Greetings
    -MrYoranimo
    PS: My main language is Dutch, so my English can be bad at some points.

    Thank you for your support! This reply is a little bit late, because I was to the camping this weekend.
    The only thing I sure do know, is that the iMac has a bad SuperDrive. That's one problem, but I don't really wanna use it, and you fix everything by Single-user mode and when I get to the desktop to test things and change stuff in the Preference Panes.
    What also came to my mind was that there also is a problem with the videocard (driver), because sometimes when I boot into Single-user mode, I can see some white pixels which aren't supposed to be there. And when booting from SUM you can see that some of the colors are different and there are weird patterns on the screen.
    I also tried to setup a NetBoot server on this computer (MacBook Mid 2010) with just Lion 10.7.4 on it, but I'm not that expert and I didn't really find the good posts on the Internet, although I tried it with the Server applications and both Server applications and DeployStudio. But I didn't succeed.
    I don't really like buying a new FireWire hard disk or external FireWire dvd reader/writer, except if it has USB support, because my MacBook doesn't support FireWire, and I really wanna make use of it then.
    If I know more or have fixed it, I will surely post again here with what I did to fix it (if no one else has posted here already ).

  • Microphone won't work for 4s only in videos?

    If I take any sort of video on my 4s the microphone won't work at all. It'll work when talking, with Siri, even in voice memos. But if I do a vine or Instagram video or regular video it won't have sound???

    make sure you fingers are not blocking the mic
    it's in the buttom of the device beside the speaker

  • Hi, I was just wondering how much it would cost to repair the rear camera of my iPhone 4s. I dropped it and it won't work and I hear something rattling inside when I shake it. How much would it cost to fix?

    Hi, I was just wondering how much it would cost to repair the rear camera of my iPhone 4s. I dropped it and it won't work and I hear something rattling inside when I shake it. How much would it cost to fix?

    If you have a tool, try removing the battery cover and chech out. Some times the camera pin may have been misplaced. If so, you can fix it yourself.

  • External microphone won't work on Macbook Pro

    My external microphone won't work on my Macbook Pro.
    My mic is an SE2200 A, and I'm pluggin that into a Behringer Eurorack UB802 (with Phantom power). This is then connected to a 1/4 inch to 3.5mm adapter so I can plug it into my Macbook Pro.
    If I plug this directly into my Macbook Pro into the headphone socket (which I've been told doubles up as a mic socket), and go to Settings -> Sound -> Input, the mic does not appear on screen at all.
    If I plug it into a 3.5mm to USB adapter, and plug it into a USB port on my mac, then the USB PnP Sound Device appears on the Settings -> Sound -> Input, but no sound is picked up.
    Could any suggest why this isn't working?
    thanks

    You have to use a cable that will break out the 3.5 mm TRRS jack into mic, L, and R.
    I haven't found the right wiring yet and the cables I have tried don't seem to work.
    See this post: What is the wiring digram on the MacBook Pro 3.5 mm TRRS jack?

  • I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

    I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

    Go to settings/music/volume limit tap on that.  Make sure it is set to OFF and when you tap it that the slider is at max

  • Microphone won't work on Audigy 2 ZS Soundc

    I've had my Dell system for at least 2 years, and FINALLY have a need to use the microphone input.
    I can't get it to accept microphone input on any recording software I've tried.
    I read the 5-6 info/help request from 2005 and and am pretty sure I set the Microphone input "on" within
    the surround mixer window.
    I've tried three different microphones - they all work on my laptop fine but nothing through the mic on my desktop
    that has the audigy card. The Creative diagnostic says everything is fine.
    Suggestions?

    UPDATE - It DOES seem to be recording but the volume is so insignificant it doesn't register.
    when I record in Photostory it can't be heard unless I "yell" into the mic.
    Using Audacity, I can record, small bumps appear on the indicator line. If I then amplify the signal, a lot,
    it's useable.
    I have the mic recording volume maxed out in creative sound mixer's setup.
    hope you can help. I have multi-media assignments to do for a summer class...

  • My screen won't work the only time it does is when i enter in my passcode. what is wrong with it?

    my screen won't work the only time it does is when i enter in my passcode. what is wrong with it?

    Try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try connecting the iPod to your computer and restoring the iPod from backup via iTunes.
    - If itunes does not see the iPod, see if placing the iPod in recovery mode will make it visible so you can restire it.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I bought my iPhone 4s in the Uk and then brought to Cyprus where I live. I used Siri to call my husband 2 days ago without problem but now when I try to use Siri it won't call any local Cypriot number but will call my Uk contacts. Help please

    I bought my iPhone 4s in the Uk and then brought to Cyprus where I live. I used Siri to call my husband 2 days ago without problem but now when I try to use Siri it won't call any local Cypriot number but will call my Uk contacts. I can call the same numbers manually so it's not my network. Any help would be appreciated.

    This sounds like an international issue? Although I can not see why? I brought my phone in Australia and operating it in Indonesia, I have the same issues.... Otherwise Siri works fine, even texting (SMS) to local numbers siri works well, but dialing local number it just wont work...! I will try using my Australian SIM card and see if that is the reason.. I tried changing the number in the contacts and took out the international prefix, I turned the international assist on and off still nothing.. How frustrating. I called apple, the technican had know idea and we to his supervisor, had to wait fro 40 miuntes and then I hung up..
    PLEASE HELP..!

  • I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI sign

    I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI signal I have to be glued to the router, and I did everything he says is supported by the Apple and all other pages and forums regarding this problem is not solved and always disconnects when connected always disconnects again!! passing will be settled as no longer factory warranty although it has neither the three months I renewed new, please help because the investment has been great and I can not use only as "a mirror" I'm waiting a true solution, thanks ....
    Sincerely,
    Catlos

    This does help me because I am pondering on wether to buy an airport extreme to solve my ipad 2 connection woes.  I have an extremely old router dLink 524....but I have NEVER had any problems with it at all ever.  My xbox connected great to it and netflix ran flawless through my xbox.....now I have an ipad2 and an apple tv and they are BOTH having horrible connection problems.  I have read most of the forums on how to fix it by changing the settings on my router but since mine is so old I couldn't do some of the suggested solutions.  So here I am debating on whether to spend all this $ on an airport extreme?  I am just hoping that if I go and purchase this, my connectivity issues problems will go away like yours did.  Just wondering if you have ATV as well and if the AE solved its problems?  I have read about AE solving ipad2 wifi problems, I'm just hoping it will solve my ATV as well.
    **Glad they didn't "moderate into extinction" your post yet, lol, Thank

  • I can't unlock my ipod nano 4th generation.  The screen is still working, I can sync to my computer and I can see when it is charging but it stays in the mode of being locked even after I unlock it at the top.

    I can't unlock my ipod nano 4th generation.  The screen is still working, I can sync to my computer and I can see when it is charging but it stays in the mode of being locked even after I unlock it at the top. What could be wrong?

    Hi Saint09,
    Thanks for visiting Apple Support Communities.
    I'd recommend the steps in our iPod troubleshooting assistant:
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    Jeremy

  • New version of safari won't work on mac 10.7.5, can't be removed, can't be replaced with old version

    new version of safari won't work on mac 10.7.5, can't be removed, can't be replaced with old version

    When I try to open safari a message says: You can't use this version of the application Safari with this version of Mac OS X 10.7.5. The application requires Mac OS X 10.9 or later.
    I see Recovery needs Wi Fi which is not available here and Recovery is loaded with a list of  potential disasters.
    To heck with Safari I'll just use Firefox. Apple sure screwed up here judging from the multitude of similar complaints on the internet.

  • My rental movie won`t work. I have sound but no picture on my screen (stays green). What can I do?

    My rental movie won`t work. I have sound but no picture on my screen (stays green). What can I do?

    Hello Amy
    If you were not able to watch your rental, then report it to the iTunes Store for further assistance.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Regards,
    -Norm G.

  • I just updated FF to 14.0.1 (Mac 10.6.8) and now netflix won't work. It's asking to restart in 32 bit mode and I changed it in the Get Info to 32 bit. No luck.

    I just updated FF to 14.0.1 (Mac 10.6.8) and now netflix won't work. It's asking to restart in 32 bit mode and I changed it in the Get Info to 32 bit. No luck.

    Try downloading the latest version of Microsoft Silverlight for Mac [http://microsoft-silverlight-mac.en.softonic.com/mac link text]. I just did this, and was able to play Netflix's streaming again--and without that "restart in 32-bit mode" button even appearing!

  • My iCloud password won't work in my MacBook Air but works in my IPhone5s.

    My ICloud password won't work in my MacBook Air but works in my Iphone5s

    Sorry, but your issue has nothing to do with Apple networking. You may get better results getting a solution if you repost to the iCloud area of the Apple Support Communities.

Maybe you are looking for

  • ORA-1078

    Hi I have a problem with my database startup, I want to recreate a database on a IBM J50 server with OS AIX 4, and this is my problem: SVRMGRL> connect internal Connected to an idle instance. SVRMGRL> startup nomount LCC-00211: unexpected delimiter [

  • Resolution no longer available.

    My computer was asleep and when I woke it my resolution had changed. i went to change it back but my old resolution of 1680x1050 is no longer there. I tried the cmd-opt-p-r hold at startup but no dice. I don't Know what to do please help.

  • Userspecific Printer determination for orders / invoices

    Hello SD-experts, At the moment output types are found via condition records, based on sales org / sales unit. These condition records contain the printing parameters. The requirement now is that for some users the parameters should be userspecific.

  • Unicode mixup in fonts

    I have a question about unicode mixups. I have a lot of old files with old fonts. If I need to upgrade some file, sometimes I need to change a font. Now some fonts will get you the problem that the unicode of the glyphs is not recognised or mixed up.

  • Selecting large amounts of data

    I'm selecting a large amount of data from a database and put the data into an object file. For some reason the process dies halfway through with an OutOfMemoryException. Any Ideas? Secondly, does anyone know how to insert carriage returns with a prep