My microphone works but other can't hear me on calls ?

my microphone works but other can't hear me on calls?

Hey sssaaarrraaa,
Welcome to the Apple Support Communities. If you are having issues with your microphone on your iPhone, then the following article will assist with troubleshooting and isolating the issue for you.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
-Norm G.

Similar Messages

  • Hi, 2011 macbook pro 13.3". facetime works but they can't hear me after about 5 minutes, every time. They still see me moving, I still hear and see them moving. What can I do to fix this issue?

    Hi, 2011 macbook pro 13.3". Every time I use facetime after about 5 minutes they can't hear me. They still see me moving and I see them moving and also hear them. Anyone have a reccommendation on how to fix this? thanks
    Rob

    sounds like third party drivers interfering. How do you connect your audio or are you using your computer speakers?
    Have you tried going into system preferences audio midi setup and making sure your mic is selected?
    This could be the people you are trying to reach's issue where they might have something running that cuts out the audio for them.
    try hitting Video, internal mic, when you're on facetime. if it's selected, then you might want to try to connect with someone else and see if the issue persists.

  • Others can't hear me during calls

    Bought Xperia Z3C and from the first day some calls didn't work well...
    Others couldn't hear me about 60-70% of the calls, they heard like wind is blowing into the mic and when I put the call on loudspeaker then it worked, they heard me loud and clear.
    So I took the phone back and ordered a new one, cause I really like Z3C, even more, if it would work with no problems
    So my new, second Z3C, same green beauty - but same problem! Only this time about half of the calls act like that. I tried repairing with PCC on the first phone and tried doing the tests, neither helped and tests showed that everything is ok. Few times, if I put the call on speaker and then back, it worked again, but not always.
    So my question is - Has anyone else had this kind of problem? And if so, what did You do? Is there even anything to do? Is it hardware or software?
    There is no other phone I would like but it would be silly for me to try the same thing third time.

    Hi stinar,
    Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    Do you by chance have a third party cover or case on the device? if so can you try removing said case from the device and then try testing.
    Let us know how you get on.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Iphone 4 speakers not working, but I can use phone to make calls & hear

    Hello, please can anyone help me? My iphone 4 has stopped ringing out or making any other sound through speakers, although I can still use it to make calls & can hear people when I phone them. I've tried resetting it & also powering it off but it has made no difference. Does anyone have any solutions that may help me please?

    Check to make sure the mute switch is not in the mute position.
    You can also check to see if Do Not Disturb is on or off.

  • When call, I can hear others ,but others can's hear me.

    It like this three days ago. I try many method.
    I bought the applecare protection plan.

    Hi,
    Please enable Microphone in Recording devices as follows:
    1. Right click speaker icon (right hand corner)
    2. Select Microphone devices
    3. Right click Microphone
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I connect my iphone5s to my 2015 Terrain using Bluetooth, when I make a call I can hear the caller but they can't hear me. Anyone else have this problem? How did you resolve it? Other phones connect and work perfectly.

    NNeed help I connect my iPhone 5s to Bluetooth in my 2015 GMC Terrain. When I make a call i can hear them but they can't hear me. Anyone else have this issue? How did you resolve it. Other phones work fine, just not my phone.

    Hello Sandylynn,
    After reviewing your post, it sounds like you can connect the device with Bluetooth and make and receive calls but they dont hear you. I would recommend that you read this article, it may be able to help the issue.
    If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
    People can't hear you during a phone
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • When I connect via face time with my friend's ipad or iphone we can see each other and I can hear them but they can't hear me.  HELP!

    When I connect from my mac via facetime with my friend's iphone or ipad we can see each other and I can hear them but they can't hear me.  The mute is not applied, and the microphone seems to work with other applications.  Help!

    I have same issue in my MB Air with Snow Leopard.   It used to work fine but one day I found that the mic mute was locked on.   I went to System and ensured mic was working by seeing the bars move.   I went to Facetime > Video drop down and it is all greyed out so not active and the mic symbol in Facetime pane has a line through it (muted) and is dead.    I have tried everythinng to UNmute the mic.   Two way video is fine and I can hear the other party perfectly.    Seems like this happened about the time of a Snow Leopard update but may be wrong.    Issue is several months old and, well, getting old!    I love Facetime with my grandkids etc. who all use Apple stuff.    There HAS to be a way to reactivate the mic in my MB Air.    Could someone please help??

  • My speaker on my iPhone 4s stopped working. I can't hear my phone ringing, music, apps or use the speaker when having a call.  I can still make and take calls when I see them calling but can't hear the phone ring.

    This afternoon my speaker on my phone stopped working. I can not hear it ringing when someone call, but if I see someone calling and I answer the call they can hear me and I can hear them fine. I also can't not put the caller on speaker at all , I also can't hear my music or gaming apps. When I turn my phone on or off it does not make a sound as well. I have turned the phone off and turned it off by pressing the top button and home button at the same time and that did not work. I checked the volume and the mute button and the volume is up all the way. I don't know what else to do can you please help me?

    I have had this happen to me on 3GS, 4 and 4s.   Usually the solution is one of the following:
    1-  If  your volume indicator says  headphones even though they are not plugged in, then:
    Stick your headphones into the headphone jack and then remove quickly.
    2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
    3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
    Hope one of these works for you

  • TS3406 magic jack is not working properly. I can call out and hear the person i have called, but they can't hear me.

    My Magic Jack is not working properly. I can make a call and the person I have called can hear me but I can't hear them. What can I do to fix this?

    if it play not sound at all then it's likely the hardware issue where the headset detector gets stuck
    like this the detector just is stuck in the opposite way
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    more
    iphone stuck in headphone mode

  • When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic, I use the voice recorder all the time and I have no problems w FaceTime. My headphones and Bluetooth do the same thing as far as not being able to be hea

    When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic bc face time or voice recorder are not affected. I can't even use my headphones or Bluetooth to get around the problem. This has stumped 2 geniuses, they just try to swap it out for $150.

    I am having the same issue with my iPhone 4. I can hear everyone but they can't hear me. Visited Apple Store and they said speakers were out, both bottom mic and top one for speaker phone. Said they were busted. Reloaded all software and didn't work. Got in parking lot and worked for 1 call. Now it's out again. Wanted $150 for new phone, haven't done it yet. don't know what to do.

  • The volume of my MacBook Pro is not working I see but I can't hear

    The volume of my MacBook is not working I see on screen but I can't hear.

    Mute button? F10
    Have you used the headphone Jack?  Look in there see a red light.
    Try plugging and unplugging the jack to flip the switch

  • All data and messaging works on my note 4, but last night the cellular phone service just went dead.  I can call people but the line is just silent, and people can call me, it rings, but I can't hear them.  ?????

    all data and messaging works on my note 4, but last night the cellular phone service just went dead.  I can call people but the line is just silent, and people can call me, it rings, but I can't hear them.  ????? What is wrong with it????  How do I fix it????

    You aren't attached to a bluetooth headset or other device for some strange reason?  Or even an automobile bluetooth, I have a friend that has this issue with his Prius because even when it is not running the bluetooth is still active and connects to his phone.

  • When I make a call I can hear the other person but they can't hear me?  Tried everything.

    When I make a call, I can hear the other person but they can't hear me?  Tried everything.  Took it to the local ATT store and all they could tell me is it shouldn't be happening and to take it to an apple store?  Any ideas?

    Try to isolate the issue. Use earphone and if the issue still happens then it might be the phone issue.
    - If earphone works fine then it may be the mic on the iPhone. Try cleaning the debris on the iPhone. Finally a restore of the device and try to set it as a new device. Tha will isolate if it is a software or hardware issue.
    - You can take the phone to Apple store once you have tried all this.

  • My iphone 4 was working good until IOS6 update, now I can't hear anything, my ear phone donot response ...Speaker are ok..if some one call me...they can hear me ...but I can't hear them.....please desperately need help...plz suggest...all reset is done...

    My iphone 4 was working good until IOS6 update, now I can't hear anything, my ear phone donot response ...Speaker are ok..if some one call me...they can hear me ...but I can't hear them.....please desperately need help...plz suggest...all reset is done...except restore ...

    Anyone? . . . :S

  • Calls have been dropping out mid-call (after initially working) with full reception since upgrading my iPhone 4 to iOS5 (can hear them but they can't hear me).

    Calls have been dropping out mid-call (after initially working) with full reception since upgrading my iPhone 4 to iOS5 (can hear them but they can't hear me). The call initially works but then after a minute or so, they stop hearing me, even though I can hear them. Sometimes it goes the other way and I can't hear them.
    Please advise how to remedy ASAP.

    PS: I have had full reception bars when this has occured on a 3G network in Sydney, Australia (3 Mobile).

Maybe you are looking for

  • Dynamically creating a master-detail report

    Hi, I have a situation where users enter an order number and then get a list of shipments. They then want to click on one of the shipments and get a report. I tried doing this with parameters, but users forget to hit [Enter] after the Order parameter

  • Unexpected synonym creation via a materialized view DDL statement

    While I was doing some testing for a future materialized view creation I did this... create materialized view yes as select empno, ename from emp;Oracle created a table called "YES" and a materialized view called "YES". Then I did this... create mate

  • Thumbnails will not display in Bridge

    I am running CS5 on a Mac. About 3 days ago Bridge stopped displaying thumbs for files created from RAW (it does show most thumbnails for tiffs and jpegs created in the past) I have tried to purge cache but i get a msg that says something like "1st o

  • CDC synchronization - how to make it perform

    For synchronization between a transactional database and a data warehouse we've been using synchronous CDC. Performance is still somewhat an issue. The situation is as follows (simplified): EMP table. This is a large table (40 million + records) with

  • Flex Txt Input Controls

    I'm new to flex and need some help... I have a combo box which have 2 options get data from SQL based on either Employee Name or Employee ID and next to it is text input box to enter the name or id. This is all in my mainapp.mxml. In my EmpRef.mxml I