My microsoft account is not visible by other user

Hi,
Nobody can see find my miscrosoft account in Skype.
Is there hidden button where I can make my microsoft account Id visible in search results?
Thanks
Andrew

No, they can't.
Only by Skype Id.
And this is quite a problem for me

Similar Messages

  • Initiator Task not visible to other users in the Group

    Hi
    JDeveloper 11.1.1.6, WLS 10.3.6, BPM 11.1.1.6
    I have a Process and the swimlane containing the Initiator Task is assigned to a Group.
    All the users in the group are able to Initiate the Task.
    But when the Task is initiated, the Task is assigned to the User specifically, but not to the Group. I guess this is the default behavior.
    The Human Task Assignee - defaultPerformer for the Initiator Task is uneditable in the initiator.task file.
    What I was expecting is that, since the Initiator swimlane is assigned to the Group, All the users in the Group should be able to see the Tasks initiated by anyone in the Group.
    I want this behavior in the Initiator type of tasks specifically. (The normal Tasks other than Initiator tasks are working as expected.)
    The reason why we want this is, let us say after the task is created, and before it is submitted, there is a lot of work to be done, for example, data entry, should be done by many people in the Group.
    If all the users in the Group are able to see the Initiator Task, then it will help to share the responsibility of data entry among the users of the group.
    I tried Reassigning the task to Group, and it works, but we am looking for something automatically assigning to the Group when the Process is created. (We may not be using the Oracle BPM Workspace at all).
    Can anyone please tell us if there is a way to make the Initiator Task automatically assigned to the Group instead of just the user?
    Thanks for any help
    Sameer

    Hi Ashwini
    Thanks for replying.
    I did the same and it was working for me even if the Type is Single.
    I just gave the Group name and all users were able to see the task. This is fine with me.
    I just observed one more thing.
    When the task is created, all the users in the Group are able to see it in 'Me & My Group'.
    But the data entered by the creator is not seen by other users.
    There is an action 'Save' in the Task. If the creator clicked on it, then the task is automatically 'Acquired' by the creator.
    Other users in the group are able to see the task and the saved data, but are not able to Submit.
    What I expected the Save button to do is only to Save the data in the Payload. Not Claim it.
    Is there a way to make the payload data only to save but not to claim the task?
    Thanks and Regards
    Sameer

  • Data Uploads done with one User Id not visible to other users in SPM

    Hi,
    Data uploads were successfully carried out by one of the SPM users. However, other users (with different user id) are not able to see anything in the Data Upload Summary screen.
    Is there a restriction on the visibility of Data Upload Summary for data uploads carried out with one User id to other users in SPM? A similar behaviour is observed for other screens within the Data upload workbench.
    Incase this is not the expected behaviour, it would be great if you could please provide pointers to possible reasons for this.
    Just for your information, all users have been granted same privileges in the SPM application.
    Thanks in advance.
    Regards,
    Ashish Sharma

    Hi Ashish,
    No this is not the expected behavior. We have seen this issue for other customers in the past but the reason has always turned out to be role related.
    Can you ensure that the required SPM roles are assigned to the user who do not see the DM data both in ABAP as well as portal.
    Thanks,
    Divyesh

  • SubArea not visible for other users in ESS

    Hi All,
    I have created a new subarea (having few services) and assigned it to a Benefits and payments Area.
    Now the issue is its only displaying to Administrator Role not for other users.
    if iam giving SAP_ALL  to other user then we are able to see this.
    Please let me know if iam missing anything .
    Thanks,
    Santosh

    to the role assigned to the user, you need to select end user visible in the role.
    note Number              939412
    ssign the following permissions to an End user.
       o  Goto Content Administrator ->Portal content ->Content Provided by
          SAP ->End User Content -> Employee Self Service
       o  Right click on  Employee Self Service. select open-> Permissions
       o  Assign read authorization to default user group "everyone".
       o  Check the 'EndUser' checkbox
       o  Save the Assigned permissions
       o  Goto System administration -> Permissions.
                                                                    Page 2
       o  Goto  Portal content ->Content Provided by SAP ->srvconfig
       o  Assign read authorization to default user group "everyone".
       o  Check the 'EndUser' checkbox
       o  Save the Assigned permissions.

  • Public Foler Calendar Categories not Visible to Other User

    My company uses calendars within the public folders for staff to be able to check their schedule.
    When I add an event to one of those calendars, and change the category colour, I can see it, but none of the other users accessing the calendars can see them. It shows any text changes I've made, but no category. If those users open up the event, the category
    name is even showing as selected, but the colour doesn't actually show up.
    Any ideas?

    Hi,
    There is no feature in Exchange server to manage calendar view in Outlook. Based on my research, it seems a known issue that Outlook does not recognize or coexist with color category in the public calendar folders since Outlook 2007.
    If you want to see the same colored categories on all of your computers, you must create the same categories and colors on every computer. The following article is about share color categories for Outlook 2010:
    http://blogs.technet.com/b/outlooking/archive/2012/02/03/how-to-share-color-categories-for-outlook-2010.aspx
    Here are some similar threads about public calendar color categories:
    http://social.technet.microsoft.com/Forums/en-US/0ed65440-ecf8-43f8-8e06-599d57674627/exchange-2010-public-calendar-category-colors?forum=exchange2010
    http://social.technet.microsoft.com/Forums/en-US/6ede7f1b-d8dd-41e6-a5db-b9f58d1bbf86/outlook-public-folder-calendars-not-syncing-category-colors?forum=outlook
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Shared Tasks not visible to other User

    Hello,
    I am facing a problem that I have shared Tasks of User-A to User-B. But when I open shared Task at User-B MS Outlook it opens but no tasks of User-A are visbile.
    For Testing
    I Shared User-A shared tasks for myself with same permissions & are visible to me.
    I Shared my Tasks for User-B & are visible to User-B.
    I Shared User-B Tasks & are also visible to me.
    I Created new Outlook profile for User-B, Upgraded Office Version from 2007-2010, Created new Windows login Profile, login him on some other PC but still User-B is unable to View User-A shared tasks.
    I login User-B on OWA (Webmail) still User-B is unable to View User-A shared Tasks.
    I have checked for User Mailbox permissions but found nothing.
    Please help me to resolve this issue.

    Hi,
    If User-A shared a calendar folder to User-B, could User-B open the shared calendar in his Outlook? or are those calendar items visiable in that time? 
    If yes, please separately get the
    Get-MailboxFolderPermission -Identity
    [email protected]:\Calendar
    & Get-MailboxFolderPermission -Identity
    [email protected]:\Task
    And then compare their permission to find the difference entry.
    Or you may directly check the User-B's permission under User-A's folder:
    Get-MailboxFolderPermission -Identity
    [email protected]:\Task -User [email protected]
    This might not the problem on User Mailbox permissions level but Mailbox folder permissions level. Thanks.
    Tony Chen
    TechNet Community Support

  • Windows 8.1 Standard with Microsoft Account does not work with WSE 2012

    I have a WSE 2012 machine with 3 users & 3 devices setup.
    My Windows 8 (Standard) Laptop with Local User connects fine.
    My Windows 8.1 (Standard) Nettop with Local User connects fine.
    But my Windows 8.1 (Standard) Laptop with a Microsoft Account does not automatically login to the Server. It worked fine when it was running Windows 8 with a Local User but unfortunately in 8.1, MS decided to force a Microsoft Account login on us if I want
    to continue to use Sky Drive! That would be fine, but now it wont login to their own server product...
    I've tried adding a Windows Credential (set at Enterprise level) to the Credentials manager but it just gets forgotten on reboot.
    If I log into the LaunchPad (which creates a temporary credential) then it works fine HOWEVER the "remember me" tick box is being ignored and the next time I restart the PC the LaunchPad is signed out again!
    I've re-installed the connector.
    I've removed the PC from WSE, un-installed the connector and then re-joined. (Done this twice, once as a local user and then converted to MS Account, and once as an MS Account.)
    Basically, I just don't think WSE2012 with non-Pro versions of 8.1 on a MS Account have been tested and MS need to either fix it or document it. If someone could just get the LaunchPad to remember my local login and automatically start on next reboot then
    it wouldn't be a problem. OR stop launch pad from deleting the manual credentials I added everytime I reboot. At the moment it's the worst of both worlds.
    Any ideas?

    Hi Susan,
    Thanks very much for replying, but if you re-read my post you'll see that I already know how to do that and also that I don't want to change back to a local account because I need Skydrive access. 
    Essentially as it stands, I can use Windows 8.1 with WSE but lose SkyDrive (and any other MS Account benefits) or I can use an MS Account with Windows 8.1 but lose permanent access to my server shares and client backups...
    Reading around it seems that it's perfectly possible to have an MS Account and then do one of the following:
    Use a Windows Credential stored for the local user to give access to the Server.
    Set the LaunchPad to automatically log in at start-up.
    If on a Domain, go into settings and Link the MS Account to your Domain Account.
    Unfortunately none of these options are working for me (3 isn't even possible with 8.1 Std).

  • Price should not be visible to other user's in sales order..

    hi friends ...
    my client requirement :
    price should not be visible to other user's in sales order level, it should be visible after invoice only ...
    eg : gurgoan user should not be able to see the sales order price of hyderabad user raised sales order ... but gurgoan user should able to raise the sales order for his customer ..
    plz reply me in detail with configuration steps  .... thanks in advance ....

    Hi
    If you are talking about pricing condition control through authorizations in sales transaction VA01, VA02 etc. - please check SAP Note 105621: Suppressing display of Sales Order Conditions.I would suggest that you search for this auth object and note and work accordingly) and it shall enable you to restrict display to specific conditon type (for example VPRS: cost).
    For this you need to know the pricing procedure and step number relevant to your sales order. Please seek guidance from functional consultant on it.
    Secondly as you want to restrict access on geography you have to use org level controls as applicable along with the above auth object.
    Hope this helps
    Prashant

  • I have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

    i have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

    Some updates and clarifications:
    1. I already have my 2.4 channel fixed.
    2. Wireless network name is 8 alphanumeric characters; no spaces
    3. Already using WPA2 security with a 10 alphanumeric key (again, no spaces)
    4. I am running Airport Utility 6.0, Mac OS version 10.7.4
    I should also say that these problems started happening less than a month ago...prior to that all devices where working normally.
    An added update: My two e-readers (nook ST and Kindle 3) are also refusing to connect...perhaps confirming that I have 2.4 GHz issues?

  • Message no visibility for other users

    Since I started working with Message Beta my account visibility for other users is offline.
    With 'the old'  iChat my online status was visible to other users.
    With Message however non of my chatfriends can see that i'm online even if my status shows online and visible in Message.
    The only thing other friends see is that i'm offline!
    Who knows the answere?

    Hi,
    If you have multiple accounts/Buddy lists go to the Messages Menu > Preferences > General Section and use the item to unlink the Buddy Lists
    Now check each one and also the setting to make them all the same.
    If that does not work try Deleting the Account and then re-adding it/them
    10:22 PM      Friday; April 13, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Safari (7.0.1) is non-responsive (spinning pinwheel) upon start up.  It will work in temp user account but not in my main user acct.  I tried reinstall via comman-r prompt on start up but the problem persists.  Any suggestion for reinstall or repair?

    Safari is non-responsive after intitial start up.  Before it can load the homepage (google), it will hang and give a perpetual pinwheel until I force quit the program.  Safari works in temporary user account but not in my primary user account.  I have reinstalled osx via the command-r upon start up and the problem still persists.  Any suggestions on how to reinstall or repair safari?

    Thanks for thinking about my problem. I've already experimented with creating a new user, a co-administrator. The programs don't crash when that account is running, just as they don't crash when the guest-user's account runs. So it seems that the problem is limited to the default user's account, which is the one that was running when I installed the updates to the OS and the firmware. Another clue is that the programs that crash as soon as they are launched are *probably* the ones that were open at that time in that account. Yet deleting Saved Application States does not keep the programs from crashing when next launched.
    So the mystery continues, but these additional facts will help with the diagnosis, I hope.
    Thanks again for your suggestion.
    Gordon

  • Services for object box not visible for some users

    Dear All,
    PM module experts please help. In equipment master transaction IE02  in left hand top corner we get  box for SERVICES FOR OBJECT which is useful for attaching external documents like word and excel. but problem  is it is  not visible for some users.  Our security/authorisation team has also done some check but didn't get any solution.
    anybody knows the reason why there is no box availabe?
    Thanks
    SR

    Dear Siddhartho Raha
    I think this problem related ABAP work,this problem very general problem,first refer any note availble or search throgh any class in SE24
    note are like this way 492331,this is not related to your query but same like it is and also may be
    Due to an error in the coding, it was possible to link a Word document to a Document in IE01. Because the data cannot be saved in transaction IE01, the linked document is lost after leaving the transaction.
    Hope this may helps you
    Prem.

  • One user from AD is not visible in portal user administration

    Hi,
    one of our users defined in Active Directory is unable to log into the portal. We have Kerberos authentication.
    I've checked this user is also not visible in portal user administration. The rest of the users are visible and are able to log in.
    Any ideas what could be the cause?
    Maybe some settings/attributes for this user on the Active Directory side could be the cause?
    Regards,
    Ladislav

    Hi,
       Could you please check and confirm if the user,group path are the same for the
    particular user on AD as that referred to by the portal. If not he would not be on the portal and
      then there would not be kerberos too in place for him.
    Rgds

  • Changes are not reflecting in other users

    HI all it's urgent
    One user abcd who had made some changes is not reflecting to other users after transport, we have 2 clients 100 and 200 ,changes are reflecting in own user id ,we transported with scc1 transaction
    with regards
    vinod

    Dear Vinod,
    Can you explain what did you try to do ? what changes do you make ?
    Dimitry

  • After transport changes are not reflecting to other users

    HI all it's urgent
    One user abcd who had made some changes to some screens is not reflecting to other users after transport we have 2 clients 100 and 200 changes are reflecting in own user id we transported with scc1 transaction
    with regards
    vinod

    I am not a developer, so pardon me if I misunderstood this question. I thought screens and other repository objects are client independent. That means the change should be evident in all clients without a need to transport.
    Is this to do with security by any chance ( though it seems unlikely )? Can the other users see the change in the original client in which the request was made? That should help you determine whether the problem lies with the transport or outside. Also you can check the contents of the transport in SE01 and see if it holds the kind of data that you are expecting it to. I am guessing you have already generated the screen after saving the changes.
    Hope this helps,
    Sanket

Maybe you are looking for