My microsoft mn-710 can't see my linksys router

my wireless adapter can see other routers in the neighborhood but can't see my own which is a few feet away from my computer... the strange thing is my mn-510 can see and connect with my router well i want to upgrade so i can get more mbps if any of yall can help me it would be appreciated

Well logon to www.linksys.com/download & follow the steps properly for selecting the router model number & version number correctly in order to select the proper device & download or rather save the file on the desktop please.
Open the setup page of the router using 192.168.1.1 by keeping the username blank & typing the password as admin & over there click the Status tab & click the sub-tab as firmware upgrade & browse it from the desktop & click upgrade & then try resetting the router reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!

Similar Messages

My AirPort Extreme can not see my SMC router

I have a new MacBook Pro. It can see other routers (in my neighborhood) and connect to the internet by ethernet cable into my SMC router but it can not see the SMC router wirlessly. I have no security on my router right now. Any ideas?

I have the exact same problem: SMC Barricade G 2408WBRP-G-CA with v2.08 firmware. Because there's lots of talk of problems with WEP, turned that off, but no luck, the built-in airport card of the powerbook won't connect to the router.
I have successfully connected to a Cisco access point at work with 128-bit WEP with no problem at all, so I'm certain the hardware in the machine is functioning... just not with this access point.
This is a brand new 17" Core 2 Duo Macbook Pro that I just received... all available software updates applied.
Macbook Pro Core 2 Duo 17" Mac OS X (10.4.8)

I have an Officejet 8500a Plus, but he can't find my Linksys Router

I just bought an Officejet 8500a Plus printer,
It can't find my Linksys router (WPA), all the other networks in this area are visible except our Linksys Router, with WPA security.
Tried to configure it with the software, connect the printer with USB, and tried to connect the linksys router, it say's: You're out of range of your wifi acces point(something like that)
HELP?
This question was solved.
View Solution.

Here are a few tips:
1. Make sure 802.11g is present. Other wireless modes (like 802.11n) are OK, but g must be present.
2. Broadcast your SSID and do not use MAC filtering.
3. Make sure your router has the latest firmware.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My iBook can't see my Linksys WRT54G router/network

What I said in the subject line.
This setup worked fine, absolutely reliably, for about a year. About a month ago I began to notice that my iBook G4 was not hooking to my wireless network, but instead to a locally-available "Linksys" somewhere in the neighborhood.
My wife's Dell, with XP, sees it just fine.
I've re-started the router and DSL modem countless times, turned off and back on Airport, rebooted the iBook, etc. Nothing. Right now as I'm typing, I can't see the network with my iBook, but my wife's Dell sees it okay.
Any ideas?
(PS. I was using 10.3.9 up until yesterday. Just upgraded to 10.4.6. Same problem still exists with Airport.)

Well, whichever way it was set up, it worked absolutely correctly for about a year. I didn't change anything in my router's settings (nor those of my computer, at least deliberately), but a few weeks ago the computer began having trouble picking up my wireless network.
Yesterday my iBook could not see my network at all. I had to either use that random "linksys" network from a router somewhere around my neighborhood, or else use an Ethernet cable.

Can I connect another Linksys router to my current Linksys router?

Hello everybody,
I have 3 computers in my house. One computer which is used by my brother and he downloads a ton of porn, music, and opens a lot of ports for online gaming. Needless to say he is a very high risk user. I would like to isolate his computer from mine and my sisters.
Can I use two seperate routers? One router which he connects to and my sister and I connect to the other router. Will this prevent any possible file sharing between my computer and my brothers? Is this a safe way to isolate my computer from his? Please let me know how I can do this. Thanks a lot!!!

yes it is possible.
Here's what you do:
1. connect your computer to the new router (your router) to the regular port/s 1,2,3,4.
2. Access the set up page of the router (at this point there is no internet connection)>> click start, click run typed in the run field http://192.168.1.1 and enter
3. Leave the username blank and password is admin for the router (unless you changed it)
4. On the set up page>>> you'll see there local ip address on boxes 192.168.1.1>> change it to 192.168.2.1, then save settings and power cycle your router.
5. Connect now your router to his router>> to do this, run a cable from the regular port of his router to the "internet or WAN port" on your router. Reboot your computer and your router.
** on this way his computer should not be able to talk to your computers coz of the different IP address range**

Can't see my score result online

Hi
I passed the 70-640 exam in November in a Prometric exam center and I have the printed result and the candidate number. but I want to see my exam results and the certificate on the Microsoft website. how can I see that?

Hi,
Do you have a live account? Your live account is linked to your MCP account and when you login on below link you can see your score only when your exam was scheduled under your own MCP. If this is not the case and you did not booked the exam with your
own MCP, you need register the exam under your own MCP. To fix this call Microsoft they are very helpfull. You can also check your score on the prometric site with your prometric logins.
For login MCP, see
https://mcp.microsoft.com/
Regards,
Reshma
Please Vote as Helpful if an answer is helpful and/or Please mark Proposed as Answer or Mark As Answer when question is answered

Macbook: I can't see my home network....

I am using a Macbook as detailed in my profile. Yesterday, upon getting home from work I booted up my Macbook to find out I couldn't get on the net.
Upon further investigation I found that the Macbook could not see my home network, despite me using it the previous evening. It can see all the other local networks that it usually can, as well as the mobile modem that I am using to type this now.
All other computers on the network can see it, and looking on the network configuration screen it can see my Macbook. But I can't see it
The router is a Belkin one

Tried that yesterday - still no joy

TS1506 I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments.

I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments. I've tried opening straight into other apps and just get error messages, and I the mail preview there is just a grey screen telling me the file name and size. It worked fine until I did the IOS upgrade

Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
 Cheers, Tom

Trying to install MS Office 2011 for Mac SP 2 on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so. I have closed all applications. Can anyone help? Many thanks

Trying to install MS Office 2011 for Mac SP 2 (14.2.0) on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so. I have closed all applications. Can anyone help? Many thanks

Thanks Kurt! I had tried all that and had tried closing both programmes from the application monitor, but SyncServices Agent refused to close. I tried closing Launchd which is their mother application, but that just caused the screen go go blank. In the end the two programmes let themselves be closed next time I tried the installation process so all was well. Thanks for your help!

TS3276 Can't see the sent e-mails with Microsoft Outlook

I can sent e-mails using Microsoft Outlook but i can't see the sent e-mails in the folder provided. I can only see them after someone has replied to it. What am i doing wrong?

Sorry Thierry if I wasn't clear enough.
I meant the Add-Ins tab in the Ribbon, not the Options:
SAP does provide the functionality to hide the pane, on the bottom right you can see the top of the pane and there is an X. It can close it but the add-in stays on.
Then in the Ribbon you can activate the "Add-Ins" tab and you will have the SAP Cloud for Customer menu command.
This is what I meant in my initial reply by saying that I do that often. I hide the pane and reactivate it by simply clicking on that button highlighter in black above.
At least in it's in Outlook 2010 but like you said in your initial post, maybe it is not available in 2013. Partho Guha will be able to confirm.
JB.

I can't see the scrollbar on my microsoft word 2008 for mac documents

For some reason, in microsoft word 2008 for mac, I can't see my scrollbars on my documents. I've tried everything, but they aren't visible. This problem started when I got my new mac air and transferred over my programs and files. Any ideas?

make sure your documents setting on your iPhone is truned on for the iCloud. Go to settings, > iCloud > switch documents & data is on.

Just bought an iMac. I want to be able to "remote in" to work. I've been told to download software from Microsoft site but can see there are several versions available. Can anybody advise which one I need. Thanks

Just bought an iMac. I want to be able to "remote in" to work. I've been told to download software from Microsoft site but can see there are several versions available. Can anybody advise which one I need. Thanks

You mean Microsoft Remote Desktop Connection Client for Mac

How can I see the relationship of tables in Microsoft SQL Server?

How can I see the relationships of the tables? Exactly like what we see in Access. In Access if we select Database tool and then relationships, we can see how the tables are linked to each other. How can I find this option in SQL Server Management Studio?
Thanks,
GGGGGNNNNN
GGGGGNNNNN

Thanks,
I could verify what you explained here. how can I overcome this message and resolve it when my database owner is not there:
Message while starting with database diagrams of a attached/restored database
If you have just attached/restored a database from another SQL Server instance. While accessing its database diagrams folder, you may get the following message
It is an informational message and would prevent you from working on database diagrams. The message says that your database has no valid owner currently. Reason for this error is that database owner on a previous SQL Server instance does not exist here.
To overcome this error just add the valid database owner through T-SQL or SSMS. Also verify the compatibility level of your database is correct for your SQL Server instance.
I appreciate your help.
GGGGGNNNNN
GGGGGNNNNN

Can't see data in data tab - sql server 2005

hello,
i am connected to a sql server 2005 database (with jtds driver), the connection is ok, i see the tables but i can't see data in data tab.
i have an error : incorrect syntax
somebody can help me ?
thank's in advance
alex

definitely. I was going to say, make sure you have the privileges to read data.
From Microsoft SQL Server 2000 on, it is recommended that you are a member of the db_datareader - so that data in the database can be read
Barry

Can not see new Power Query data sources?

Hi,
New Power Query can connect to three new data sources: Sybase IQ, Exchange, Dynamics CRM Online
http://office.microsoft.com/en-us/excel-help/whats-new-in-power-bi-ha104149776.aspx
I just installed the latest Power Query and wanted to connect to CRM Online instance. For some reason I can not see these new data sources, what am I missing?
Thanks in advance!

Hmm... I didn't think we had quite released this version yet. It's possible that that website went live before the link to the new download. There should be a blog entry about this on the "Power BI" blog in the very near future.
At the risk of providing a spoiler :), the CRM Online support is via OData.

My microsoft mn-710 can't see my linksys router

Similar Messages

Maybe you are looking for