My Microsoft Office font selection is delayed... Please help solve?!
I have a Mac Book Air and have Microsoft Office installed on my laptop. When trying to switch or select a font in any of the programs it is always delayed about 10 seconds. I have extra fonts added to my computer but wouldn't think that would slow it down. Please help, I'm not sure how to fix this problem??
In the Preferences (General tab) there's an option to turn on (or off) WYSIWYG font & stype menus. Make sure that is turned off. What you should see is that the first time you select a font that it takes about 10 seconds to build the font menu but after that font access is nearly instantanious.
There is one thing that's wierd - you can change fonts from the Ribbon or you can change fonts from the Font menu in the menubar. These apparently build different caches because if you select a font from the Ribbon all selections after that are fast. Or should be. But the first time you select a font from the Font menu (or vice versa) the same delay takes place. But again it should happen just once.
Similar Messages
-
how use set up with office 2011 for mac as I did keep tried put download but it's always 'update' download. I want get start set up new office 2011 for mac? please help me
You must be using an update CD. You need the software that has the full version first - install that, then you can use the update one if needed. I know, cuz I made the same mistake - lol
-
My macbook Pro 13" 2013 has a mouse problem, its not moving naturally, and keeps on moving around like its dancing. Please help solve this!!
Go step by step and test.
1. Restart
2. Shut down the computer.
Clean the trackpad with moist not wet microfiber cloth.
System Preferences > Point & Click
Try turning off three finger dragging and then turning it on after testing.
3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
4. Reset PRAM: http://support.apple.com/kb/PH14222
5. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
6. Close all windows and quit all applications.
Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
Select Disk Utility from the drop down. When the Disk utility window opens up,
select Macintosh HD, then First Aid.
Click Repair Disk Permissions button.
Ignore the time remaining estimate.
Last 1 minute may take longer. -
My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue
i have the same problem...my ipod is 4th generation?uggghhhhh
-
Problem with MS Office for Macs, can someone please help?
I am using MS Office for Macs 2011 on my new MBA, and have encountered a pretty annoying issue when I transfered all my Excel, Word & PP documents from my old Sony PC. When I open an Excel spreadsheet for example, the computer also opens every single OTHER speadsheet. Since I have over 30 Excel documents, this obviously becomes very annoying and time-consuming! The same thing happens when I try to open a Word or PP document. Is there some setting that I need to change to have only the document I actually want to open? All the documents were created on older versions of MS Office, but I doubt this is the problem. Can someone help please? Thanks!
You could also try deleting the microsoft preference files, incase something has gone amiss there.
Make sure all Office application are quit fully
Go to User/[unername]/Library/Preferences
Look for
com.microsoft.Excel.plist
com.microsoft.office.plist
com.microsoft.Word.plist
com.microsoft.Powerpoint.plist
Outlook is there too, so if it is causing you issues, you can delete them too
Next time you open your office applications, the new prefernce files are created. Any particular preferences that you had set will of course need to be reset as they are now all new (default) again.
Another thing to check is in you System Preferences - General
Do you have the 'close windows when quitting an application' checked? if not, checking it may fix the issue.
Message was edited by: actionmarker
Added second tip -
I can't remove keynote, pages, numbers, or any microsoft applications from my dock. Please Help!
I have been trying to clean up my dock, but i can't remove certain items from my dock. I can't remove keynote, pages, numbers, or any microsoft applications. When I was trying to delete the apps they were not running or in use. I tried dragging the icons to the trash bin and I also tried dragging the icons away from the dock, but they just kee bouncing back to the dock. Please help!
Welcome to Apple Support Communities
Try deleting the Dock settings file. Open Finder, select Go menu (on the menu bar) > Go to Folder, and type ~/Library/Preferences. Then, delete "com.apple.dock.plist", and finally, open Terminal (in /Applications/Utilities) and type:
killall Dock
This will restore Dock to factory settings, so iWork applications and Microsoft apps will be deleted from Dock -
A new problem with CS5 forced me to download PScc but the problem is still there. I am getting tmp00000001 in photo merge when importing multiple files from inside PS and if trying from bridge I am getting a pop up box telling me I need to select more than 1 file. Photoshop potomerge is not recognizing my selections from bridge..!! please help.. my knowledge of computers is a 3 on a scale of 1-10
if i run this particular code
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
This returns 1 row of data
However if i run a small part of the above code...
SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
It returns a lot of rows with a status of 2
Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
:( -
Creating PDF files from Quark causes font/image issues. PLEASE HELP.
After creating a PDF file using Adobe Acrobat Professional (using the file>Export to PDF option) from QuarkXPress version 7.3, my client sees and prints distorted letters with various fonts and they even sometimes see lines where they shouldn't be. I don't see these issues on my end, even when I print the documents. For example, I may have a headline of four words, the top of the words are shifted to one side, or sometimes even the top half of the letters are in a different color. Please help soon before I lose my clients... or my mind. Thanks.
We don't use Quark anymore, but I seem to remember that the export to pdf does not use Acrobat Distiller. It is Quark's own pdf maker. If the customer does have Acrobat Professional, then get them to print to the Adobe PDF 'printer' and seeif they get the same problem. They may need to open the Distiller app to set which output settings are used.
-
Microsoft office test drive expired new PowerBook, help
hi. I don't know where else to ask this question. I have had my PowerBook for about 6 hours and I am already frustrated ... I tired to use the Microsoft Office Test Drive that is on the machine only to have it tell me that my 30 day trial has expired. How can it be expired when the PowerBook has only been used for less than 6 hours and Office for the install only? Any suggestions on how to get this to work? Or who to complain to? To Apple? It is almost impossible to complain to Microsoft or to get an answer from them.
I have purchased a copy of Microsoft Office but it hasn't shown up yet.
Thanks for the help.
PalomaHi, PalomaMouse, et al. - There is a new KBase article containing the solution to this issue, here:
http://docs.info.apple.com/article.html?artnum=302930
Tuttle
1460/8168 -
I need to install a font on clients machine please help....
Hi
My requirement is that i want to install a font on clients machine iam using jsp and how do i check if the font is already installed.
Please help me 2 meet the deadlines.
Thankshi,
If you are using english language and need other font to display something special character you have to provide link to the font file.
else you have to write applet to install font on client machine. then there are other issues like you should have the applet signed.
If you have seen some multiligual sites like japanese. those site use html encoding for that. like Shift_JIS. Due to this the browser sets that perticular font and shows the page. If the font is not installed then it connects to the download center and download the font and install the font.
Thanks
vivek -
How to get save and select layout ? Please help!
what parameters do i need to pass ? in set_table_for_first_display .
please help!
IF r_container IS INITIAL.
CREATE OBJECT r_container
EXPORTING container_name ='CONTAINER_1' .
CREATE OBJECT r_grid
EXPORTING i_parent = r_container.
CALL METHOD r_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'ZPO_INV_ALV'
CHANGING
it_outtab = t_alv_data.
Edited by: Matt on Apr 8, 2009 2:12 PM - excessive use of ! and ? removed. Code tags added.check this
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = report_id
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
* IS_LAYOUT =
IT_FIELDCAT = it_fieldcat
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
*I_SAVE = 'A'*
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_FINAL
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
After i cancel my credit card...my apple id has been disable.... Cant update my app and dowload apps on my phone...please help it ....thank
If you go to expresslane.apple.com like MetaSolaray said, then you'll have your answer.
-
PLEASE HELP SOLVING THIS PROBLEM
Our buissness will fail if we could not solve this problem.
we have 1720 cisco router that has 2 WIC one is the backup to the other.we need to chick if the communication through one WIC to a specific router connected to it failed the other WIC could keep the route to the same router .how could we do this(what is the configuration?)and what is the suitable IOS that we could use?
Please help.Abbas,
You define two routes in the router with different Administrative distance.
Define ip routes
ip route 0.0.0.0 0.0.0.0 serial0
ip route 0.0.0.0 0.0.0.0 serial1 170(Administrative distance is 170)
The route with least administrative distance is prefered if you have two similar routes in the routing table.
Hope this solves ur issue. -
Can I get Microsoft Powerpoint on iPad 2? PLEASE HELP!
Hi whoever is reading this, (hopefully someone who can help me)
I'm doing a presentation and I was wondering if it was possible to get Microsoft Powerpoint on iPad 2? If not, Keynote is like Powerpoint, right? If it is, can you put pictures and photos on to Keynote that are saved on your Mac? Like, insert photos saved on your Mac into a slide?
PLEASE ANSWER!!!!!!!! IN DESPERATE NEED OF HELP!!!! DUE ON THE 25TH OF MARCH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (It's for a Chinese school).Microsoft haven't made app versions of any of their office programs, so you can't get Powerpoint itself.Keynote supports Powerpoint files, as do :
Documents To Go Premium (on-line help here)
and
QuickOffice HD (they have a manual for their app here) -
SQl Select Statement. Please help
Hi all,
Is this statement correct?Can anyone please give me the correct way of writing one.
String query = "SELECT EmployeeID, LastName, FirstName, EmailAddress, PhoneNumber from Employees where EmployeeID="<%=request.getParameter("ID")%>;
I also tried
String id = request.getParameter("ID");
String query = "SELECT EmployeeID, LastName, FirstName, EmailAddress, PhoneNumber from Employees where EmployeeID="<%=request.getParameter("ID")%>;
This also didn't work.
ThanxThanks for reply. Tried your reply. Got this exception.
javax.servlet.ServletException: [Microsoft][ODBC Driver Manager] Invalid cursor state
Not trying anything special just to execute this query and post the results. Here is the full code.
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
String url = "jdbc:odbc:empapp";
Connection conn = DriverManager.getConnection(url);
Statement stmt = conn.createStatement();
String id = request.getParameter("ID");
if(id != null)
String query = "SELECT EmployeeID, LastName, FirstName, EmailAddress, PhoneNumber from Employees where EmployeeID='"+request.getParameter("ID")+"'";
//PreparedStatement statement = conn.prepareStatement(query);
//statement.setString(1, id);
ResultSet rs = stmt.executeQuery(query);
%>
Employee ID: <%= rs.getString("EmployeeID") %>
Lasyt Name: <%=rs.getString("LastName")%>
First Name: <%=rs.getString("FirstName")%>
Email Address: <%=rs.getString("EmailAddress") %>
PhoneNumber: <%=rs.getString("PhoneNumber") %>
<%
%>
String query = "SELECT EmployeeID, LastName, FirstName, EmailAddress, PhoneNumber from Employees where EmployeeID='"+request.getParameter("ID")+"'";
Thanks
Maybe you are looking for
-
Time evaluation_quota generation
We are using -ve time mgmt for time evaluation. The requirement, EL would generate if employee completed 240 days (Attendace day + previous year availed EL). If an employee complete the eligibility i.e. 240 days, so quota would be generated, calculat
-
Dynamic path does not work in Css files
Hi, I have a css file in which i have used few images, but when i try to make the path dynamic and include that css in my page the image doesn't appear but when i put the complete path in it it works. It works when used in this way : .inputrightbg
-
I saw while surfing that one can arrange to have the Apple Store get their new iPhone up and running uing my Verizon, which is my carrier settings, set the phone up, give some explnation on how to use it (which I need since I have never had an iPhone
-
How to create a document with SRM BAPIS
Dear colleagues, I have a problem with SRM BAPIs. I need to insert a pdf document into a record using SAP BAPIs, This document is already in a table in a binary format I am trying with these BAPIs: 1. CALL FUNCTION 'BAPI_SRM_DOC_CREATE'
-
Using an ADC and or DVI Monitor with a PC/VGA
Is this possible? I have a piece of test equipment that has a VGA output and I want to run it on one of the older Mac displays with the ADC, or if not a newer monitor with DVI. Any suggestions? Thanks JP