My mid year 2009 macbook pro won't turn on completely...

My mid year 2009 macbook pro froze while safari was open, I could not force quit, and I lost my trackpad control, so I turned it off. Now, when turned on, the screen comes on but the computer doesn't open completely, then it times out and turns off. What now?

Hi Melophage,
Thanks! for replying to my plight!
Nope, Safe mode didn't work...We tried everything in the manual, starting w/ Safe mode, on to resetting the PRAM and also used the utility disc that came w/ the laptop, to repair the disc...at which point we got into a continual error 19 loop, but the read out stated that the hard drive was OK..? Now we can't eject the disc...I guess we are headed to the Apple Store for an estimate for repair.  Ouch!
Is there a way to eject the disc right now?  

Similar Messages

  • My 1 year old Macbook Pro won't turn on and won't charge - no power light at all. Any suggestions?

    My 1 year old Macbook Pro which ran out of warranty this month on the 3rd of June, won't turn on and when I plug in the charger, there is no charging light and it won't turn on.  Can someone tell me what I should do? Has it died? It's only new! And I've never dropped it. Will I loose all my data? Help!

    Try here >  Troubleshooting: My computer won't turn on
    And here >  Apple Portables: Troubleshooting MagSafe adapters
    Try the help from the suggestions above.
    Hopefully it's nothing serious and you have a backup you can restore from if necessary.

  • My relatives 2009 Macbook Pro won't turn on and isn't taking a charge.

    Holding down the power button has no effect and when the charger is inserted, there is no green or red/orange light. All outlets are functioning and the computer was working as it always had the day before. Help?

    Hi Cygnus and Lyra,
    Thanks for visiting Apple Support Communities.
    If the MacBook Pro doesn't respond when the power button is pressed, or seem to recognize the charger, these troubleshooting steps can help:
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    You can find these steps here:
    Troubleshooting: My computer won't turn on - Apple Support
    All the best,
    Jeremy

  • Late 2009 Macbook Pro won't turn on

    Last Friday, my half charged Macbook Pro randomly turned off and was unresponsive.  No sleep/power indicator light, no start up chime, nothing.  The only thing that works is the battery indicator light. I have tried a PRAM reset, SMC reset, everything suggested on this website and in the manual. I'm wondering what I'm looking at replacing here, and what the cost could be.

    I think a visit to an Apple Store or a Service Provider may be the best choice, if only for the diagnosis. There's a high probability that repairs will be costly so you'll want to make sure to hit the problem dead on instead of splurging money all over.

  • My MacBook Pro won't turn on. What keys do I use toed last week.

    My MacBook Pro won't turn on. What are the keys to reboot?  This happened last week.

    http://support.apple.com/kb/HT3964 if you haven't replaced the PRAM battery in the last 4 years.
    If you have:
    http://support.apple.com/kb/HT1379
    Note, the PRAM battery is not the normal replaceable battery for power.  It is the equivalent of the PC CMOS battery.

  • My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

    My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

    Mac OS X: Gray screen appears during startup 

  • My MacBook pro won't turn on all the way gets to the apple with the spinning wheel underneath and that's all I need help asap

    My MacBook pro won't turn on it just gets 2 the spinning wheel and keeps spinning

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    If this doesn't work then you will need to erase the drive and install Snow Leopard from scratch:
    Erase and Install Snow Leopard
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. When completed quit DU and complete the Snow Leopard installation.

  • My MacBook Pro won't turn on although the battery life is showing full

    My MacBook Pro won't turn on although my battery life is showing full ,

    Go step by step and test.
    http://support.apple.com/kb/TS1365
    Note: Steps 5 and 6
    Step 5
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • My MacBook Pro won't turn on, what's wrong?

    My MacBook Pro won't turn on. What's wrong?

    gobetty wrote:
    My MacBook Pro won't turn on. What's wrong?
    Depends upon what you mean by it not turning on, there are various causes.
    Is the power button pressed and nothing happens? Disconnect all other devices, then a SMC and NVRAM reset.
    Is there a white screen and nearly nothing? A hosed EFI firmware.
    Is there a grey screen and a loading bar that gets stuck? Either a failed firmware update or corrupted drive/OS X.
    Is there a grey screen with a spinning wheel? Bad third party or Apple at boot kext file.
    Are you loading but not able to log in? Possible corrupt third party software designed to startup upon login.
    ..Step by Step to fix your Mac

  • My macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

    my macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

    Might be a problem with the adapter.
    Help here >  Apple Portables: Troubleshooting MagSafe adapters

  • My macbook pro won't turn on without any reason?

    my macbook pro won't turn on without any reason, is there any solution in this case?

    You need to hit the "reply" button on post to whom your responding too, it's hard to tell if your responding to me or someone else.
    small button on the side of the computer and didn't lightting up( no reponse at all). is their any problems do think with the battery?
    Usually if your battery is dead because it wasn't charged you can do the SMC Reset and then check the Magsafe if it's connected and showing the orange light, then let the battery charge up.
    Once the battery charges up, the computer will boot normally and then you have to reset the PRAM, time, date etc.
    https://support.apple.com/kb/TS1365
    Magsafe issues: https://support.apple.com/kb/TS1713   https://support.apple.com/kb/TS4127
    *PRAM Reset  http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
    What's store in PRAM   https://support.apple.com/kb/HT1242
    Hardware Test
    https://support.apple.com/kb/ht1509

  • I have 12,000 photos on iphoto and my macbook pro won't turn on...gray screen goes to blue screen and that is it...HELP

    I have 12,000 photos on iphoto and my macbook pro won't turn on...gray screen turns blue and that is it.  HELP!!

    Run through this list of fixes
    Step by Step to fix your Mac
    You can do this to copy and remove files from the non booting internal
    Create a data recovery/undelete external boot drive

  • My macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on.

    my macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on. i don't know how to get it to progress past this loading page.

    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    If you are not using Lion, Mountain Lion, or Mavericks then use the following procedure:
    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Mid-2009 Macbook Pro will not turn on

    Hi Folks,
    so my mid-2009 15in Macbook Pro will not turn on. I updated the OS to Mavericks in December 2013. I'm from California, but I recently moved to the Guam/Marianas area where it is more humid and generally around 87 degrees F all day. For the past month my computer has worked fine, albeit I did notice the fan was running a little more than usual. I usually would just put it into sleep mode when I would finish using it (apparently a bad idea based off of reading other posts concerning humidity and, more importantly, heat). One day I finished using it, closed it and the next day went to open it; I could hear the fans start to work, but then it stopped. It hasn't turned on since. You press the power button and nothing happens. I tried all the troubleshooting stuff.
    So, my question is this: what do you think is the problem? Moreover, how much do you think it could cost to repair it? My experience with computers suggests to me that it's probably a dead motherboard. I'm wondering if it's worth trying to salvage this thing or if it would be prohibitively expensive. There are no Apple stores in the area to take it in to get advice unfortunately.
    Now, I just want to vent a little frustration. I have many apple products, and I've even switched my mother over to an apple computer, but now that I need some very basic support, apple doesn't provide a contact e-mail or a free chat? I think charging someone $19 for 'one time assistance' is ludicrous. I bet if I brought this into an apple store I could at least get some advice, and thus get some idea how I want to proceed with repairs or not. I suppose I'm also rather frustrated that my macbook, which I have been most happy with all these years, breaks because I go somewhere a little more humid and generally warmer? It would appear that the hardware failure is connected to the climate. This makes me skeptical about purchasing another mac if it can't handle a little humidity. (I have not spilled liquids on it, nor have used this computer while transitioning from an air-conditioned/humid location which could potentially cause condensation). I do not think I'm being unreasonable (yes I do think a $2500 computer should not fail after less than 5 years), but if you think I am unreasonable, please enlighten me.
    Thanks for any help. I really appreciate it.
    Ken

    Ken,
    the “Important Handling Information” in the little white manual that came in the box with your MacBook Pro states that its operating temperature range is from 50 °F to 95 °F (10 °C to 35 °C), and that its operating range of relative humidity is 5% to 90% (non-condensing). If your corner of the Pacific is outside of these ranges, the manual states that “Failure to follow these handling instructions could result in damage to your MacBook Pro”.
    I have no idea what problem your MacBook Pro has; since you’ve tried all of the troubleshooting stuff, you’ll need to somehow get your MacBook Pro to a qualified service facility to diagnose the problem. If the logic board does need to be replaced, it would probably cost hundreds of dollars for a replacement, and you might find that purchasing a replacement used MacBook Pro of the same model to be price-competitive with just replacing your MacBook Pro’s logic board.
    If you find Apple’s out-of-warranty policies unacceptable, then your only alternative to venting would be to purchase your next computer from a different company which has out-of-warranty policies more to your taste.

  • My macbook Pro won't turn on, is it because the battery pack is dead?

    My Macbook Pro won't power on.  Is it because the battery pack has died?

    Well yes if it isn't connected to the AC.

Maybe you are looking for

  • Blinking #1 G5 diagnostic LED. I've already tried everything I can find info on.

    I have a 2005 Imac G5, non isight, that I replaced the capacitors and PSU. It was repaired and running fine for about a month when the other day, my wife went to use it. She woke it up, and was working online fine. She was then needing to print somet

  • Insert one table and update another???

    Hello, I was wondering if it is possible to insert a record in one table and update another another record in a different table. I have a form on my company's intranet that allows employees to add comments (ADDT Insert transaction) about new products

  • 1.1.23 Freezes on cancelling node

    Hi, Due to the extreme bad performance on some object nodes, I often have to cancel the node's query in progress. About half the times I hit cancel, sqldev just freezes up (no redraw inside the window). After 15 minutes of hoping for a recovery, I ha

  • I think I ruined my motherboard

    I opened my mac yersterday just to clean the dust for a long time I bought it on february of 2012, its a mac book pro 13" , I was surprised of how cool it looked and I touched to mother board and that it just touched it, cleaned the dust and then whe

  • Please help with two tables...

    I've created form based on two tables - two blocks with relationship. One table have fields ID and DESCRIPTION and there is LOV based on it. LOV returns value to textbox. I want that user see in textbox value DESCRIPTION, but when user save changes t