My mini iPad always black screen even after restore. Need reset.

My mini iPad always get black screen and no response even after restored on yesterday? Only reset?

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Similar Messages

  • Ipad 2 - black screen even after restore

    After only 4 hours of use just a black screen.
    iTunes detects the iPad 2, all data on it , but it is just a black screen - after a restore and hard resets, the same!
    Return?

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Apple TV blank screen even after restore?

    Can't see home screen or anything on Apple TV. Did restore on iTunes.  It said successful but still no picture.

    Howdy PWQuick,
    If I understand correctly you are unable to see anything on your TV screen even after a restore of your Apple TV with iTunes. I would use the other troubleshooting steps to help find out what is at fault here:
    Apple TV (2nd and 3rd generation): Troubleshooting video issues
    Your TV picture is completely black or has other quality issues such as static or blurry video
    Confirm the settings and configuration of your television.
    Check to verify that your TV's video input matches the HDMI connection.
    Refer to the manufacturer's user guide for assistance with changing your TV input or picture mode.
    Verify that your television meets the Apple TV minimum resolution requirements.
    Verify that the Apple TV's power cable and the HDMI cables are securely connected.
    When connecting to power, observe the front LED on your Apple TV for activity. If no light is visible, try a different power outlet or power strip.
    Connect the Apple TV directly to your television, bypassing any home theater receivers, splitters, repeaters, or switches temporarily.
    Inspect all cables for any kinks, tears, or other evidence of damage.
    Verify that the HDMI cable being used with your Apple TV is a bidirectional cable. Although rare, single-direction HDMI cables do exist. If unsure, try flipping the connection between your Apple TV and television.
    If all else fails, try a different HDMI cable.
    Change the Apple TV resolution:
    Press and hold the Menu and Up button on your Apple Remote for six seconds.
    The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals.
    Press Play on the Apple Remote to keep the current resolution or Select to manually cycle to the next resolution.
    Reboot your Apple TV by holding down the Menu and Down button on the Apple Remote for six seconds. Allow the Apple TV a few minutes to restart.
    Note: If the Apple TV video functions correctly after bypassing a receiver, switch, or repeater, please refer to the accessory manufacturer's user guide for additional support.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Frozen login screen even after restore and reinstall

    When I am starting my MacBook Pro 15" (Mid 2010) I often have a frozen login screen (where I enter my account password) and the only thing I can do is press for seconds the power button. I have already tried to reinstall MacOS X Lion and even a restore from my time machine back up but the problem still appears. Is there anyway to resolve this problem? And is it possible to erase everything and reinstall Lion ?

    Yes a clean install will erase everything in your hard drive.  Be aware you should have a clone backup (which I prefer) or a time machine backup so that the migration assistant can copy your user and all preferences.
    if you mac already has lion installed you could
    Restart your computer while holding the option key. After the startup chime you will see your available boot volumes. Choose Recovery HD. (You might be able to start up with command-r to boot directly into the Recovery HD emergency partition, but I have found that only the most recent Macs will respond to this key combination.) Once boot is complete, look under the menu bar's Tools for Disk Utility. Start up Disk Utility, choose your main hard drive partition, and reformat to your heart's content.
    You won't be able to perform certain partitioning tasks when booted this way, but you can do nearly everything that you could do if you were booted from an external device or optical disc.
    or another option is:
    Make a bootable DVD or USB stick .  I will guide you through the steps:
    If you don't have a copy of the install mac osx lion.app redownload again from the app store
    Before doing this you should make a clone of your hard drive or have a time machine backup at hand, that is a very important step.
    1. right click or control click on the lion install file and select show package contents.
    2. Navigate to Contents>Shared Support
    3. Inside there is an dmg image called InstallESD.dmg
    4. Burn image to a blank DVD or usb stick with program of your choice (USB stick works faster while booting).
    5. Restart holding option key
    6. Select DVd or usb stick you just made.
    I hope this helps.

  • Ipod mini stuck in recovery mode, even after restoring

    my ipod mini is stuck in recovery mode. I've tried putting it into disk mode and restoring the ipod but , as soon as it resets after restoring it shows it's still in recovery mode. Does anyone know how to fix this problem?

    What happens if you try and do a low level reformat of the iPod using the tools provided by windows and the step-by-step guide on this page?
    http://www.methodshop.com/gadgets/ipodsupport/erase/
    Another good troubleshooting step at this point might be to remove all other USB devices (minus the keyboard and mouse if applicable) and reboot your PC.
    Try restoring it on another PC or Mac if necessary.
    B-rock

  • MAC MINI BOOTS WITH VIDEO CORRUPTION (scrambled pixelated screen) even after restore and ram change, OK IN "SAFE MODE"

    Would there be a MACOS Start-up item causing this considering it's OK with a "shift" boot?

    Hi, does this Mini have a video card, or integrated graphics?
    Likely it's the quartz driver, that is disabled in Safe Mode.
    See this great post by themachead on how to list the extensions in Safe Mode with System Profiler then compare to the extension folder!
    http://discussions.apple.com/thread.jspa?messageID=10161377&#10161377

  • HT201412 My 3GS phone has a continuous white screen even after restoring hardware

    My 3GS phone has a continuous white screen and will not let me get to my display.  I have connected to ITunes and restored the hardware and restarted my phone and I still get the same thing.  Anybody have any solutions?

    me too, i think its called the wsod (white screen of death) and i think its a hardware defect caused by either the lcd or the connector

  • How do I resolve white screen even after restoring?

    I have a 3GS for 2 1/2 years.  Over the weekend, it started getting white screen.  As suggested.  I 've restarted, reset, restored and it still happens.  What can I do?

    You can also use passcode for Photo Manager Pro.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%202/d72027ca07ece629e7e 8f280be7281e3.jpg

  • My ipad mini will not turn on even after a reset.  Any one else experience this and how do you fix it?

    Ipad mini will not turn on even after a reset?  Any suggestions!   While playing angry birds ipad mini froze, hit home button Angry birds shut off, slide bar screen came up, slide bar, went to angry birds again started playing and froze, pushed home button screen went blank and now will not turn on.  Need help!

    Try holding your on/off and home buttons at the same time until you see the Apple logo. 

  • HT201210 I updated my ipad 1 to 5.1.1 and after that, my ipad shows black screen only, no more

    I updated my ipad 1 to 5.1.1 and after that, my ipad shows black screen only, no more screens, what can i do to fix it,a already tried to recover several times, on three different computers nothing happens

    1. Turn off iPad
    2. Connect USB cable to computer
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

    Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

    You will need to do a DFU restore by holding the home and power buttons down (while the device is plugged in to your computer) until the device's screen goes black and as soon as the screen goes black, count down from 3 and release the power/sleep button, but keep holding down the home button. Then, iTunes will say the iPod needs to be restored. The restore process will take some time and even though the iPod may appear to be frozen, don't interrupt the restore.

  • My iPad3 is freezed because the iCloud notification stays on the screen even after I touched the OK button.

    My iPad3 is freezed because the iCloud notification stays on the screen even after I touched the OK button.

    Hold Home and Sleep buttons and the iPad will restart

  • My iPad frequently locks up, even after updating to iOS 7.1.  When it locks up it's nonresponsive to the home button and the only remedy is to force a shut down and reboot. Help!

    My iPad frequently locks up, even after updating to iOS 7.1.  When it locks up it's nonresponsive to the home button and the only remedy is to force a shut down and reboot. Help!

    DEVICE NOT RECOGNISED IN ITUNES
    If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps.

  • My iMac will not boot up. It's stuck in the black screen right after the apple logo. I ow

    I Own a brand new iMac 5k with retina display. It gets stuck in the black screen right after the apple logo And all of a sudden shuts down.

    You can return a new Mac within 14 days of purchase.
    A new Mac is in warranty for 1 year from the date of purchase.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare or take it to the Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
       Reset PRAM.   http://support.apple.com/kb/PH18761
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the  appropriate method.
       Start up in Safe Mode.  http://support.apple.com/en-us/HT1564
    Best.

  • Home button is not responding on iPAd even after restoring it

    home button is not responding on iPAd even after restoring it?

    Fma26-
    One thing you can try is to reset (reboot) the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart in a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
    If the Apple logo never appears, you may have a broken button.  If your iPad is less than a year old and still in warranty. Apple should repair or replace it.  If it is convenient, show it to an Apple Store Genius.  Otherwise, look for a nearby Authorized Apple Repair Center.
    Fred

Maybe you are looking for