My mini turns on when I "unhold" the button!!!

Is this normal??
First, I turn the mini off.
Then, I switch the hold button to the ON position to avoid accidental turning on.
Then, I switch it back to the UNHOLD position.
It turns ON afterwards!! Why??
(I thought in order to turn it on, the PLAY/PAUSE button has to be pressed...)

This is completely normal. It's almost like your iPod's saying "Ooh, you're unlocking me, so you must be going to use me"! Makes sense to me - why unlock it if you're not going to play with it?

Similar Messages

I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response

I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response

Maybe some help here:
http://support.apple.com/kb/TS1367
http://support.apple.com/kb/TS1365

Private browsing will not turn off when I press the button or use the hotkey.

When I try to turn off private browsing, using the button and the hotkey, it will not turn off. What is wrong?

Make sure that you not run Firefox in automatic [[Private Browsing]] mode.
You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
To see all History settings, choose: Tools > Options > Privacy, choose the setting '''Firefox will: Use custom settings for history'''
UnCheck: [[ ] "Automatically start Firefox in a private browsing session"
See also [[Private Browsing|#Always_start_Firefox_in_a_private_browsing_session|Always start Firefox in a private browsing session]]

My iPhone 4S keeps losing connection and turning off, and i am unable to turn it back on again without the charger, but it turns on when i press the button and regains signal fine once i return home?

Hi
I have recently bought a white iPhone 4S on Tuesday, and it has been repeatedly loosing all connection and just suddenly switching off.
When this happens I am unable to turn the phone back on again without a power source plugged into it. When I try to remove the phone from the power source it goes completely dead again.
However, the most recent time this has happened (today), as soon as I returned home the phone had no problem starting up as normal when I pressed the power button.
The signal was working fine even though it says 'searching' in the left hand top corner of the screen. I am wondering if my WIFI at home is influencing the phone to work inside the household?
This is a problem that needs to be sorted out ASAP because the phone is not working the majority of the time when I need it to.
Please if you have any suggestions or know the cause of this problem inform me straight away.
Would be much appreciated.
Thank you.

Try connecting it to your iTunes library in Recovery Mode and restoring it. See this article for help on getting your iPod into Recovery Mode.
http://support.apple.com/kb/ht1808
B-rock

My Iphone is stuck on a facebook screen and will not Exit or Turn off when i press the buttons

Well i clicked on a Music vid
And It said Sign up for facebook to post So i went to fill in my details To show freinds and My iphone wont let me exit Facebook meaning im Stuck on it
i tried holding the home button And the off button but no Good I use my phone for Alot of things and need it back ASAP
Please help me ;(

Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.

My Ipad mini is not turning off with the botton neither with the cover. It is not also turning on when I open the cover. Please, what I have to do.

My Ipad mini is not turning off with the botton neither with the cover. It is not also turning on when I open the cover. Please, what I have to do?

If the cover you bought is not a legitimate apple cover than you may be having the same issue I had.
The one I purchased has a top cover swivel, if you spin it around( meaning the top case cover)
The magnet will return to the correct spot and it will work again. It is only located at one end of the case.
Hope this might help:)

My iphone I fell to the ground yesterday, from a height of approximately 1 meter. after this I trailed off, now only turns on when I plug the usb but the apple appears and just turn off and turn back, there is nothing more that I recommend doing?

my iphone I fell to the ground yesterday, from a height of approximately 1 meter. after this I trailed off, now only turns on when I plug the usb but the apple appears and just turn off and turn back, there is nothing more that I recommend doing?

With that behavior you need to take the iPhone to an Apple store genius bar for an out-of-warranty replacement. In the US that is $269 for the iPhone 5.

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

Sorry i mistakenly made this question. It was alright. No Problem At ALL

While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.

My iphone screen doesnt turn black when im on the phone

my iphone 4 screen doesnt turn black when im on the phone and its not the case and i havent dropped it, is there anything i can do without having to get a new phone. i would get a new phone if i need to but i would like to fix it without having to.

The Ambient Light Sensor may be malfunctioning. Unfortunately there is not much you can do without tampering with the phone internally and voiding the warranty. Your best bet is to bring the phone to a local Apple Store and have them inspect it.

MAC is turned off when you start the application.

MAC выключается при запуске приложений.
MAC is turned off when you start the application.
P.S. it is desirable to give an answer on the Russian
Interval Since Last Panic Report: 69711 sec
Panics Since Last Report:          1
Anonymous UUID:                    BF785864-5B2E-7638-B9E8-ED938B20D6F6
Thu May 23 20:28:41 2013
panic(cpu 2 caller 0xffffff80242b7e95): Kernel trap at 0x0000000000000000, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x00000000053ca068, CR4: 0x00000000001606e0
RAX: 0xffffff8024813e10, RBX: 0x0000000000000001, RCX: 0xffffff80248e04f0, RDX: 0xffffff8024890100
RSP: 0xffffff810cd7b978, RBP: 0xffffff810cd7b9a0, RSI: 0x0000000000000001, RDI: 0xffffff8045a66410
R8: 0x000000000000000e, R9: 0xffffff8045a90908, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff803e98cc02, R13: 0x0000000000000000, R14: 0xffffff803e98cc10, R15: 0xffffff8045a66410
RFL: 0x0000000000010202, RIP: 0x0000000000000000, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000010, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff810cd7b610 : 0xffffff802421d626
0xffffff810cd7b680 : 0xffffff80242b7e95
0xffffff810cd7b850 : 0xffffff80242cd4dd
0xffffff810cd7b870 : 0x0
0xffffff810cd7b9a0 : 0xffffff80242772b2
0xffffff810cd7b9d0 : 0xffffff8024585aae
0xffffff810cd7b9e0 : 0xffffff80242f0981
0xffffff810cd7ba30 : 0xffffff80242f0021
0xffffff810cd7ba70 : 0xffffff80242f10d6
0xffffff810cd7baa0 : 0xffffff80242ed939
0xffffff810cd7bac0 : 0xffffff8024515c0a
0xffffff810cd7bb20 : 0xffffff802431112c
0xffffff810cd7bb90 : 0xffffff80242fc5f1
0xffffff810cd7bd90 : 0xffffff80242fc93d
0xffffff810cd7bf50 : 0xffffff80245e063a
0xffffff810cd7bfb0 : 0xffffff80242cdd23
BSD process name corresponding to current thread: installd
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST... [Show more]

A: MAC is turned off when you start the application.

I took in the store returned MAC. Although when you start offering configure everything from scratch. The OSes can reinstall?
Last night passed out on completion of the work.
Interval Since Last Panic Report: 75071 sec
Panics Since Last Report:          2
Anonymous UUID:                    BF785864-5B2E-7638-B9E8-ED938B20D6F6
Thu May 23 23:25:35 2013
panic(cpu 2 caller 0xffffff80036b7e95): Kernel trap at 0xffffff80036102b1, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000040001, CR3: 0x0000000079b9d056, CR4: 0x00000000001606e0
RAX: 0x0000000000040001, RBX: 0x000000000000002c, RCX: 0x7fffffffffffffff, RDX: 0xffffff80f546bd88
RSP: 0xffffff80f546bd30, RBP: 0xffffff80f546bd70, RSI: 0x000000000000002c, RDI: 0xffffff80f546bdb0
R8: 0x000000000000001f, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff802a9a6a20, R13: 0x0000000000000001, R14: 0x0000000000000070, R15: 0x0000000000040000
RFL: 0x0000000000010216, RIP: 0xffffff80036102b1, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000040001, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff80f546b9d0 : 0xffffff800361d626
0xffffff80f546ba40 : 0xffffff80036b7e95
0xffffff80f546bc10 : 0xffffff80036cd4dd
0xffffff80f546bc30 : 0xffffff80036102b1
0xffffff80f546bd70 : 0xffffff8003620dc4
0xffffff80f546bda0 : 0xffffff800364f0c1
0xffffff80f546bde0 : 0xffffff8003616786
0xffffff80f546be50 : 0xffffff800361831c
0xffffff80f546be90 : 0xffffff8003635a40
0xffffff80f546bed0 : 0xffffff80039556a7
0xffffff80f546bf40 : 0xffffff8003955449
0xffffff80f546bf50 : 0xffffff80039e063a
0xffffff80f546bfb0 : 0xffffff80036cdd23
BSD process name corresponding to current thread: ubd
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:   �... [Show more]
Read other 15 answers

My iphone does not always turn on when i click the home button or start button? Happened after ios7.5 update. Any suggestions? Phone is brand new

my iphone does not always turn on when i click the home button or start button? takes a few clicks and then it goes on. Happened after ios7.5 update. Any suggestions? Phone is brand new

Ok i did what you said to and it did it again, I am at work. Phone is on my desk. I clicked the home button to see if I had missed any messages and it would not turn on.
Starnge thing is this happened to my other 5S. Took it to apple. They replaced it, Now this phone is doing the same thing, Could it be the software?
Do you have another suggestion for me?
Your help is appreciated .

Why does my mini ipad reset when I click the camera icon?

Why does my mini ipad reset when I click the camera icon?

Try doing a manual reset:
Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.
If that does not work, restore your iPad: http://support.apple.com/kb/HT1414.

Macbook pro folder with question mark blinking appear whent I turn on, When I press the Option key Grey lock screen appear asking for a password, can anyone help me please?

Macbook pro folder with question mark blinking appear whent I turn on, When I press the Option key Grey lock screen appear asking for a password, can anyone help me please?

Provide the computer's firmware password. If you don't know what it is, contact the person you got the computer from or Apple.
(91589)

I have an iPod touch, 3rd generation, and when I push the button to put it to sleep, my iPod takes a screen shot. It's really annoying. Is this a result from updating to iOS 4.3.3? Also, my screen is EXTREMELY sensitive-breathe on it and it turns on.

I have an iPod touch, 3rd generation, and when I push the button to put it to sleep, my iPod takes a screen shot. It's really annoying. Is this a result from updating to iOS 4.3.3? Also, my screen is EXTREMELY sensitive—breathe on it and it turns on.

- Are you also having problems with the Home button? Maybe it is sticking a little since to take a screen shot you depress the Home and Power/Sleep buttons at the same time.
- I have not seen your problem discussed here before.
- I would first try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next would be to restore the iPod via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod.

My mini turns on when I "unhold" the button!!!

Similar Messages

Maybe you are looking for