My mobile app listings changed to display NY channels

At one point, my mobile app listings were correct, but they changed so that I am seeing NY channels instead of Philly local channels. I have deleted and reinstalled, but no change. Help please...

Me again. It has now been 9 days, and no replies, are there actual Verizon reps monitoring these boards? I see that there are over 50 views, that tells me that this isn't a unique problem. Can I get some support please?

Similar Messages

  • How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

    How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

    You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

  • Thumbnails not displaying in SAP BI Mobile app

    Hello all,
    I have published a Design Studio dashboard to the SAP BI App on Ipad and it's all working fine.
    However, I haven't managed to customise an image to be displayed as Thumbnail when displaying all reports in the 'Tile Mode' (as opposed to the 'List Mode')
    According to the Mobile App administration guide, I have added the image URL to the Keywords section in the document's properties but it has had no effect on the view (It just shows the tile as an empty white square).
    Please see below the details of the environment:
    SAP BusinessObjects BI Platform 4.1 Support Pack 2 Version 14.1.2.1121
    SAP BusinessObjects Design Studio 1.2
    SAP BusinessObjects Mobile App for IPad Version 5.1.8
    iPad iOs 7.1
    Any help or pointers will be greatly appreciated

    Further, you can have a holistic view on content and device support at Content support across devices in SAP Mobile BI
    Regards,
    Ashutosh

  • Changing content in mobile app

    Hi,
    I started with flex for mobile a few months ago, and I find it very interesting. I am now building a mobile app, but I don't know how to go further.
    I have a TabbedViewNavigatorApplication, with 3 ViewNavigators. In one of these ViewNavigator, I want to change the content, but not the whole view (e.g. I don't want the actionbar to slide). Please have a look at the attached image. How to do this? Please support me as soon as possible.
    http://s18.postimage.org/8k9km920p/adobe_companion.jpg
    Thanks

    is this task so hard? I don't think so ...
    Please anybody support me

  • Changes CRM Mobile apps 4 vs. 5

    Hi,
    Does someone know if there is some documentation available about the changes that have been made in CRM 5 Mobile Apps in comparison to 4? There is the .NET platform, but I heard that many registry entries have also been replaced by config files etc.
    Thanks,
    Sebastiaan.

    Hi Sebastiaan,
    As of Features are concenred you have a new functionality termed as 'Visit Planning'.
    Technically, For BP factsheets all requried connection data is centrally mained in System Maintainance and is distributed to all clients, thus person with Mobile client don't have to enter any data while requesting for factsheet compare to what was the scenario in 4.0.
    For IPC XCM settings are required.
    While Installing the application you need to specifiy various parameters such as Message server, port etc. and thats all as far as registry settings are concerned.
    Need FeedBack,
    Best Regards,
    Pratik Patel

  • Are there any apps to change the keypad to a normal mobile phone keypad?

    Are there any apps to change from a qwerty keypad to the normal mobile phone keypad?

    Yes there is a couple of multitap (numeric keypad) apps available in the appstore, ive tested on of them and it was not good (messy interface, small buttons etc.). But i after some researching i found that its a new one coming up that looks really good, its called "multitap text". Google the name, and youll find their website for more info

  • Facing problem to display the content in Android Emulator of my mobile app

    Hi All,
    I have developed an adf mobile application as in the following and i successfully deployed my app in android emulator.....
    Link i have used to create basic mobile App ------------ http://docs.oracle.com/cd/E18941_01/tutorials/MobileTutorial/jdtut_11r2_54_2.html
    Problem :
    i can view my app in android emulator.......but if i open it i am getting a blank (white) screen in emulator......i don't know wat's happening.
    Can any one please help me to solve this problem.........
    Regards,
    Nani

    Hi,
    Yes Android emulator is very problematic, and there are certain out of box emulator configurations that would not even start up on a reasonably powerful PC.
    What works typically for me is to use an emulator built using SDK version 15 or 16 - for some reason, the Android SDK API level's emulators are much more problematic than before. There are some configurations (for example Nexus 7 tab) that simply hangs when trying to start it using default RAM allocation. After reducing it to 512, I can start it but then I can't start app. With older version of the emulator, if I set the RAM to say 512, generally the emulator will start and the app will also start (although very slowly).
    Unfortunately this is an Android issue, and there is very little ADF Mobile can do.
    In short, if possible please deploy to a device, and also please remember to deploy in release mode when you don't need to debug the app, as performance difference is very great. There are some articles on how to compile Android app in release mode. This may also help with your Android deployment. https://blogs.oracle.com/shay/entry/speed_up_adf_mobile_deployment
    Thanks,
    Joe Huang

  • FiOS Mobile App and DVR

    Hello,
    I have 2 Cisco CHS435HDC DVR's that are connected to my home network. The other day I downloaded the FiOS Mobile app and wanted to see if I can watch my recorded shows or schedule new shows using this app. The app recognizes I have 2 devices but it doesnt display my recordings or schedules. In the app it also says the devices are not connected to the network but I can tell they are. Both my phone and the devices are on the same subnet/network so no firewalls or routes are in play.
    One thing to note is that I have business service but there is no support forum on the business side so I'm hoping someone here can help.
    1. How can I configure the app to connect to the DVR's or configure the DVR's to broadcast whats needed so they are seen on the network by the app? I cant figure out what I need to do here. (Note I activated and authorized all the devices and accounts)
    2. In the DVR I cant seem to find where to change the IP address if for example I wanted to specify a static IP.
    3. If I wanted to also connect via the internet what ports do I need to forward through my firewall?
    Thanks in advance.

    I have my phone registered under Menus\Settings\Remote DVR\Mobile Phone Settings. This is where I registered my phone nunber and it provided a confirmation code. My iPhone works great. Note there is an older App that was replace by a newer app. Make sure you have the latest application for your device.
    I am not sure if a plain iPAD or other non phone devices work. I know there had been some complaints, and some requests for applications for non phone devices. Not sure on the status.
    I requested one that did not require to go to the Verizon site and back. Why not a local App on the local Wifi? And Also a remote control application developed for your PC? All can be found on The ideas boards, along with many other ideas.

  • Flex Mobile project scaling with Retina display iPad (3rd gen).

    Adobe et al,
    With the new iPad 3 we now have a ton more pixels to utilize. I'm familiar with and have already successfully tested the AIR 3.1+ commandline compiler option (-platformsdk) to get Retina display on the new iPad. In ActionScript mobile projects the content is rendered beautifully on the new iPad. But with Flex Mobile projects, something is happening that causes it to render incorrectly. It's retina display alright, but the size is way too small.
    Below is an image WITHOUT the -platformsdk build tag, that causes the app to be pixel doubled to fit on the new iPad:
    Notice that it's scaled proportionally, even though the text and components are slightly pixelated. Not a big deal, but noticeable on the device.
    This image is taken with the app rendering in Retina display (setting the -platformsdk pointing to iOS 5.1 SDK):
    As you can see, the text/components are rendered really clear, but the scale is way off. Obviously it's getting the width of 2048x1536 from the device, but it's way too small.
    How do I fix this? I've tried changing the applicationDPI, but it doesn't fix it. Setting a width/height of 1024x768 does nothing either. It seems we need to overrride a behavior that causes it to fit everything in so small.
    A little help?
    Thanks,
    iBrent

    Alright, kevinkorngut's answer was the right one. It appears that even though AIR 3.x can render high resolution apps, it still returns the incorrect DPI for the new iPad. In a Flex Mobile project you have to override the DPI using the method mentioned above.
    Here are the results I got:
    Using the runtimeDPIProvider property on the TabViewApplication tag (works for any of the three project types) I created a class that extends RuntimeDPIProvider. To detect which iPad I was on, I used the following code:
    override public function get runtimeDPI():Number
         var os:String = Capabilities.os;
         if(os.indexOf("iPad") != -1)
              if(Capabilities.screenResolutionX > 2000 || Capabilities.screenResolutionY > 2000)
                   return DPIClassification.DPI_320;
              } else {
                   return DPIClassification.DPI_160;
         } else {
              return Capabilities.screenDPI;
    I'm returning a DPI of 320 as this gives the best result that matches the proportions of the device. In other words, even though the iPad DPI is 264, setting the app to 320 gives the correct size at the new Retina display.
    In order for this to work, you must compile the app with the -platformsdk flag pointing to iOS 5.1 SDK, and currently that means you need a Mac running Lion with Xcode 4.3.1. Here's the adt command I used:
    adt -package -target ipa-test -storetype pkcs12 -keystore ~/Desktop/iOS_DevCert.p12 -provisioning-profile ~/Desktop/iOS_DevProfile.mobileprovision newiPadTest.ipa newiPadTest-app.xml newiPadTest.swf -platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS5.1.sdk
    Also, the -app.xml descriptor file must have the <requestedDisplayResolution>high</requestedDisplayResolution> within the <iPhone> tags.
    Thanks everyone for their replies!
    iBrent

  • 320PPI  5cm x 5cm ,  and the mobile app that this image appear runs on a mobile phone of 200ppi disp

    IF I DO AN IMAGE in FW or PS of 320PPI  5cm x 5cm ,  and the mobile app that this image appear runs on a mobile phone of 200ppi display resolution, then resolution seem of image should be 200ppi ... in other words should adapt automatically????

    Only if you were to measure the physical dimentions. (Using physical dimentions and changing the ppi would add or remove pixels)
    inches X ppi = pixels
    A 1200 x 1600 pixel image will be the same on all devices that share that ratio, the ppi difference comes into play when the phyical size of the screen is changed.
    Technically the quality never changed only the zoom changed.
    When designing a screen at 1200x1600 (example) That image will fit on any screen that has that spec.
    The ratio plays a role when only 1 of the 2 pixel dimentions changes (width or the height).
    On larger screens, the ppi is lower to equal the same number of pixels. So when a device can support a higher resolution, the ppi is increased on the same size screen.
    Knowing that, having the specs of the device will tell you the maximum number of pixels that screen can display.
    Therefore, when designing a screen, always start with the largest resolution (pixel dimmentions) first, then downsample to the next size screen and so on.
    The reason is simple, it is easier to remove pixels, then it is to add them later, as photoshop or any other software does not know what should be there.
    BTW, this is also the reason why you can change the pixel dimentions in the save for web dialog box and not the physical size or ppi. To make it easy to reduce the pixel dimentions.

  • Getting ioerrorevent type ioerror during webservice call from mobile app

    Hi,
    I building a mobile employee directory and for that I am using Flash Builder 4.6/AIR 3.1.0. I am using RESTful web service to get XML results and to display on my mobile application. I am getting the same below error when accessing the webservice from mobile app (Android - Galaxy Tab 7 inch).
    Error: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error # 2032"] URL: http://adfdevp.alshaya.com:7013/RESTEmployeeDetails-EmployeeDetails-co">http://adfdevp.alshaya.com:7013/RESTEmployeeDetails-EmployeeDetails-co ntext-root/jersey/restlabhttp://adfdevp.alshaya.com:7013/RESTEmployeeDetails-http://adfdevp.alshaya.com:7013/RESTEm ployeeDetails-EmployeeDetails-co ntext-root/jersey/restlabEmployeeDetails-context-root/jersey/restlab
    The same code is working in Flash Builder 4.6. I have checked Network Monitor to "Disabled" before deploying to mobile. What am i doing wrong here? I am pasting my code below-
    <?xml version="1.0" encoding="utf-8"?>
    <s:View xmlns:fx="http://ns.adobe.com/mxml/2009" 
       xmlns:s="library://ns.adobe.com/flex/spark" title="HomeView" xmlns:dao="dao.*"
       xmlns:mx="library://ns.adobe.com/flex/mx">
    <fx:Script>
       <![CDATA[
        import mx.collections.ArrayCollection;
        import mx.collections.IList;
        import mx.collections.XMLListCollection;
        import mx.events.FlexEvent;
        import mx.rpc.events.FaultEvent;
        import mx.rpc.events.ResultEvent;
        import mx.rpc.xml.SimpleXMLDecoder;
        import mx.utils.ArrayUtil;
        import valueObjects.EmployeeDetail; 
        [Bindable] 
        private var myXml:XML;
        [Bindable]
        public var resultCollection:IList;
        public function handleXml(event:ResultEvent):void
         var xmlListCollection:XMLListCollection = new XMLListCollection(event.result.children());
         var xmlListCollectionValues:XMLListCollection = new XMLListCollection(event.result.emp.children());
         var resultArray:Array = xmlListCollection.toArray();
         var resultArrayValues:Array = xmlListCollectionValues.toArray();
         var objEmployeeDetails:EmployeeDetail;
         var resultCollection:ArrayCollection = new ArrayCollection();
         var j:int = 0;
         for(var i:int=0;i<resultArray.length;i++){
          objEmployeeDetails = new EmployeeDetail();
          objEmployeeDetails.brand = resultArrayValues[j];
          objEmployeeDetails.division = resultArrayValues[j+1];
          objEmployeeDetails.email = resultArrayValues[j+2];
          objEmployeeDetails.employee_name = resultArrayValues[j+3];
          objEmployeeDetails.employee_number = resultArrayValues[j+4];
          objEmployeeDetails.grade = resultArrayValues[j+5];
          objEmployeeDetails.mobile = resultArrayValues[j+6];
          objEmployeeDetails.position = resultArrayValues[j+7];
          j = j + 8;
          resultCollection.addItem(objEmployeeDetails);
         list.dataProvider = resultCollection;
         //return resultCollection;
        public function handleFault(event:FaultEvent):void
         //Alert.show(event.fault.faultDetail, "Error");              
        protected function sesrchEmployee():void
         xmlRpc.send();
       ]]>
    </fx:Script>
    <fx:Declarations>
       <dao:EmployeeDAO id="srv"/>
       <mx:HTTPService id="xmlRpc" 
           url="http://adfdevp.alshaya.com:7013/RESTEmployeeDetails-EmployeeDetails-co ntext-root/jersey/restlab"
           result="handleXml(event)" 
           fault="handleFault(event)" 
           resultFormat="e4x" showBusyCursor="true">
        <mx:request xmlns="">
         <data>{key.text}</data>
         <data>{key1.text}</data>
        </mx:request>
       </mx:HTTPService>
    </fx:Declarations>
    <s:navigationContent/>
    <s:titleContent>
       <s:VGroup width="100%">
       <s:HGroup width="100%">
        <s:Label top="40" paddingTop="10" paddingRight="13" height="29" text="Employee Name:"/>
        <s:TextInput id="key" width="559"/> 
       </s:HGroup> 
       <s:HGroup width="100%">
        <s:Label height="30" paddingTop="10" text="Employee Number:"/>
        <s:TextInput id="key1" width="100%"/> 
       </s:HGroup> 
       </s:VGroup> 
    </s:titleContent>
    <s:actionContent>
       <s:Button icon="@Embed('assets/search.png')" click="sesrchEmployee()"/>  
    </s:actionContent> 
    <s:List id="list" top="0" bottom="0" left="0" right="0"  
        change="navigator.pushView(EmployeeDetails, list.selectedItem)">
       <s:itemRenderer>
        <fx:Component>
         <s:IconItemRenderer label="{data.employee_name}"
              messageField="position">
         </s:IconItemRenderer>
        </fx:Component>
       </s:itemRenderer>
    </s:List>
    </s:View>
    Please help me to resolve this issue as soon as possible. Appreciate your quick response in this regard.
    Thanks,
    Murtaza Ghodawala
    Mobile: +965 97180549
    [email protected]

    I am in the same boat, trying to get data from a site with simple Apache Basic Authentication.  I couldnt get the FB/AIR App for iPad to popup the login window. Then, I hard coded in my own login credentials as:
    URLRequestDefaults.setLoginCredentialsForHost("99.99.99.99", "alan", "1234");
    That worked to get logged in at least, and did bring back the data OK.
    Still working on the getting the popup the login window.

  • Morningstar mobile app on Torch 9810

    After over a month of callikng Morningstar.com, they finally admit that they will NOT be attempting to fix their mobile app for the Torch 9810.  They claim it's an OS 7 problem with RIM.
    HELP!  I'm a stockbroker, and rely heavily on that mobile app to track my clients' positions.
    Problems:  Can get market quote.  Cannot log on.  Get a "connection failed" message.  If I can log on (rarely) I get one stock quote, then it freezes.  Portfolios's columns do not line up with ticker symbols.
    I have deleted, reinstalled, and rebooted 4 separate times, so please don't suggest that.  Can anyone at RIM help, please? 
    Don't make me get an iPhone!

    Hi and Welcome to the Community!
    First off -- to set your expectation re your question for help from RIM. This site has nothing to do with any formal support from, escalation to, nor communication with RIM for any purpose whatsoever. This site is a user-to-user community of volunteers who try and help each other out as best they can. So, the answer to that question is no -- not by virtue of posting here.
    The responsibility for apps rests with the app developers...it is fascinating that Morningstar has chosen to blame OS7...sorry, but I sense an "excuse" rather than any rational reasons in that. There are tons of apps that have all been ported to OS7 just fine...
    In any event, for your situation, your only option would I guess to be to fall back to an OS level that the app indeed is compatible. Before you pursue that, though, get Morningstar to tell you the EXACT OS levels (4 octets) that you need in order to ensure proper compatibility with their app. Then, you can seek those out and install them to your BB via this process:
    Before you start, you may want to be sure you have a solid backup from which to restore (just in case)...refer to this:
    http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Backup-the-data-on-your-Blac...
    Also, if you are on BES, you will need to work with your BES admins for everything...they may or may not allow certain OS levels, and you need to ensure that your BB re-activates properly to BES.
    Atthetopofeachdeviceforum, thereshouldbesome "sticky" threadsthatdiscusstheOSlevelsavailableformanymodels. Iftheyincludeyourmodel, thenpleaseusethoseasreferenceasyouproceed. Otherwise, youwillhavetodigthroughtheofficialdownloadportalforOSpackagesforyourmodel:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Help me in embedding a map for mobile app

    I have built a basic simple iphone app in flash cs5.Now I want to create a new scene in flash cs5 to show this map fully funtional along with markers in a small resolution for mobile app.(iphone)
    link of the map:
    http://maps.google.com/maps/ms?ie=UTF8&hl=en&msa=0&msid=100795895206195398252.00044490e878 965c7dd91&t=p&om=0&ll=12.340002,77.409668&spn=4.989012,7.404785&source=embed
    Pls help me out in sorting this problem out

    You need to sign up for google maps API here : http://code.google.com/apis/maps/signup.html, get your API key. You need this otherwise it will not work. Thendownload the SDK, from here:http://code.google.com/apis/maps/documentation/flash/ its on the right, on step 2, "SDK"
    the set up flash with the SDK, and then in your components inspector there will be a new folder saying google.
    Drag that component onto the stage. Then add this code: information  will need to be changed to suit your location and API KEY
    package {
    import flash.display.Sprite;
    import flash.events.Event;
    import flash.geom.Point;
    import com.google.maps.LatLng;
    import com.google.maps.Map;
    import com.google.maps.MapEvent;
    import com.google.maps.MapType;
    public class googlemap extends Sprite {
    var map:Map = new Map();
    public function googlemap() {
    map.key = "ABQIAAAAF5GHwa7hgxz5etSP-jJVwhSK_rP-_Usta8fEpiVtC50gLzF69hQ6_VK0zgpArekpmdsRCJK2Vnp60A";
    map.setSize(new Point(stage.stageWidth, stage.stageHeight));
    map.addEventListener(MapEvent.MAP_READY, onMapReady);
    this.addChild(map);
    function onMapReady(event:Event):void {
    map.setCenter(new LatLng(45.436319770227,12.33638048172), 13, MapType.SATELLITE_MAP_TYPE);

  • Hebrew locale support in a mobile app

    Hi,
    When implementing localization to support hebrew,
    The Hebrew is not displayed correctly in the mobile app text components.
    I tried to change the font, and the best result I got to is a reverse display of the letters.
    Is it a known bug with RTL languages ? if not, can you show me a working example.
    Thank you.

    Looking at the code, this is just a normal component using a timer to animate the wait activity. I dont see how it could rotate the spinner with a long running, non interrupted process like component rendering. I guess the hope was there was some magic going on in the runtime to make that happen.
    Maybe the docs should be updated to reflect the limitation.
    Thanks,
    Bob.

  • Lync 2013 mobile app does not work internally, SIP domain is Different than users UPN. not sure if that matters.

    using the lync client connectivity tester on a pc on the same lan as my mobile client everything is green and it says its ready for use.
    using my android galaxy s5 client on wifi on the same lan i get a screen with waiting to sign in spinning and an error at the top "we cant connect to the server check your network connection and server address, and try again."
    i have uploaded the full client log files
    here: client log file
    some errors that stand out from this log file are:
    1. ERROR HttpEngine: Certificate check fails: java.security.cert.CertPathValidatorException: Trust anchor for certification path not found.
    2. <h2>401 - Unauthorized: Access is denied due to invalid credentials.</h2>
      <h3>You do not have permission to view this directory or page using the credentials that you supplied.</h3>
    i am using the correct creds, same creds i used on the analyzer tool.
    in the analyzer tool i did have to fill in the username field because my sip domain is different then my users UPN. which from what ive read its required to use the username field.
    i also filled in the username field in the mobile app with domain\username
    3. ERROR LYNC: ERROR TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/platform/networkapis/privateandroid/CHttpConnection.cpp/295:CHttpConnection exception: java.lang.NullPointerException
    Jan 14, 2015 8:40:49 AM INFO LYNC: INFO TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/requestprocessor/private/CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
    Jan 14, 2015 8:40:49 AM INFO LYNC: INFO TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/requestprocessor/private/CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry
    counter is: 0
    4. Jan 14, 2015 8:40:50 AM ERROR LYNC: ERROR TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/authenticationresolver/private/CAuthenticationResolver.cpp/431:Failing the original request as we weren't able to get the token
    this is the same type of error i was getting in the lync connectivity analyzer until i filled in the username field. but its filled in, in my client.
    again you can see the full log file is `HERE
    thank you in advance for any help. im trying to get internal working before i try external.

    Eric,
    I am trying to configure a reverseproxy on my netscaler which is in a 2 arm mode(dmz/internal) but I keep getting an error when configuring the monitor.
    i used this guide to configure it
    http://www.lynced.com.au/2014/04/configure-citrix-netscaler-vpx-as.html
    but continue to get this error in the netscaler monitor "Failure - TCP connection successful, but application timed out"
    so the virtual server is never up, thinking about just changing it to tcp as a monitor so it stays up and i can at lesat get the vip up.
    Also your link to the diagram shows it going to the reverse  proxy but the one im using has it going directly to the front end servers.
    http://www.lync-solutions.com/Documents/Lync_2013_protocol_poster_v6_7.pdf
    I'm guessing Microsoft's is the correct one but wonder why the config differential?
    I see that your diagram says "mobility url", what is the mobility url? i though that was the lyncdiscoverinternal.internal.com
    current setup is
    2 fe servers on internal
    1 edge server on dmz
    1 almost done reverse proxy netscaler load balancer.
    also this ms link i used to configure dns entries, along with the pdf linked above.
    http://technet.microsoft.com/en-us/library/jj945644.aspx
    i currently have these external dns entries and they all point to the edge server on the dmz.
    dialin .external.com
    lync .external.com
    lyncweb .external.com
    lyncdiscover.external.com
    meet .external.com
    sip .external.com
    webconf .external.com
    av .external.com
    _autodiscover._tcp.external.com.
    the internal dns links point to 1 of the front end servers
    1. lyncdiscoverinternal.internal.com
    2. lyncdiscover.internal.com
    3. _sipinternaltls._tcp.internal.com
    4. _sipinternal._tcp.internal.com
    5. sipinternal.internal.com
    6. sip.internal.com
    thanks again for your help.

Maybe you are looking for