My mobile is not responding
My mobile will not charge, it is completely dead. I tried plugging it in my pc, It is not working
try holding down the sleep/wake button on the top and the home button at the same time when it's plugged in for atleast 10 seconds.
Similar Messages
-
After a message on my computer to install an update a few days ago- I now can't open Itunes and have a message saying a module isn't working and I need to re install Itunes. However when I try to reinstall Itunes I keep getting an error message saying mobile device not working and then a message saying unable to install itunes. Any clues- Is apple stuffing up agian or is my computer mis behaving?
Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Itunes/AppleMobileDeivce not responding when syncing large files..
As stated above, Itunes or apple mobile device not responding everytime i sync a large file. for exmaple.. 1 or 2 songs i will nt encounter this error, but syncing an 400mb abv item, itune/apple mobile device will just appear not responding and crash..
This crashing thing is starting to bug me after i update my itunes to the latest one ..Yes, its version 10.5.3 , i even tried many times reinstalling..
-
6680 sync: The mobile phone has not responded.
Hello, When I try to sync via bluetooth I am getting the following message
The mobile phone has not responded.
It worked about 3 weeks ago but hasn't worked since!!
I have looked at the help section and it says that you can't restore settings on this phone. If this is the case, how am I ever going to sync my phone again?
Please help someone!
ThanksA simple yet effective solution to buetooth connection problems:
Take the battery off and put back on again and power up.
Gadget
Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail. -
Hi
Could anyone help me with this please?
Why do I get 'mobile me' in settings on my imac and not 'icloud'? when I try to go into it, it says not responding, try later.
ThanksWhy do I get 'mobile me' in settings on my imac and not 'icloud'?
Because your operating system is too old. iCloud was introduced in Mac OS X 10.7.4 and later. You can upgrade through the Mac App Store. The latest version is Mac OS X 10.9.3 and is free if your Mac is capable of running it (late 2007 IMac's and newer).
when I try to go into it, it says not responding, try later.
MobileMe was shut down forever a few years ago, that's why it doesn't work any more. -
Imported video not responding in IOS and mobile devices
Hi there
I have done this interactive graphic:
http://ing.dk/infografik/grafik-se-de-graverende-fejl-paa-kampflyet-joint-strike-fighter-1 74989
But the video does not respond in IOS and is very slow on iPad.
What could be wrong? The video is a MP4. Should it be set to preload?
Hope for your answer/advice.
MartinThat is the problem of html5 video in mobile.
It does not preload and does not autoplay.
It can only be played by a direct user event action ( like click )
There are no work arounds for this, and its made so people on mobile, do not waste there mobile internet on videos.
- Rob Boerman
Edgehero.com -
Itunes7 not responding with a mobile connected with usb port
Hello,
I try to listen music connecting a nokia n91 (hard disk 4gbyte) with the usb port and itunes7.
often itunes7 crashes (not responding status) and even I shut down the program, then it stops again, and again, and again..
Obviously with the previous version of itunes I had NO PROBLEMS!!
it seem that the version 7 has not been tested enough..
regards,
dave from italyIf it boots from the enlosure then I agree with Shootist in that it's more than likely that there's a problem with your SATA cable. Call or contact OWC and tell them the problem that you're having with their drive. They may just ship you a cable free.
Clinton -
I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either. Anyone have an idea as to what to do?
I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.
-
AMD A6-5400k - CPU1: Not Responding
Hi fellas,
I got a new CPU for my maschine, which runs on ARCH-x86_64 Kernel 3.6.10. So far everything went fine but one thing:
At boot, only of the two cores is recognized. This is only the case in Arch, both BIOS and Windows show both Cores. I rebuilt my initramfs and reinstalled linux, but none helped.
I realize, there are several topics around the www and this board, but none of them helped me in my case.
I tried some things, like booting the LTS-Kernel.
Any ideas how I can solve this issue?
I got the outputs of dmesg (system boot):
I think the relevant Lines are around 0.17000.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.46-1-lts (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP Fri Oct 12 23:52:43 CEST 2012
[ 0.000000] Command line: gpt loglevel=7 rootdelay=10 initrd=/boot/initramfs_x86_64.img BOOT_IMAGE=/boot/vmlinuz_x86_64_lts
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000009d575000 (usable)
[ 0.000000] BIOS-e820: 000000009d575000 - 000000009d856000 (reserved)
[ 0.000000] BIOS-e820: 000000009d856000 - 000000009dbae000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000009dbae000 - 000000009e9d3000 (reserved)
[ 0.000000] BIOS-e820: 000000009e9d3000 - 000000009e9d4000 (usable)
[ 0.000000] BIOS-e820: 000000009e9d4000 - 000000009ebda000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000009ebda000 - 000000009f04c000 (usable)
[ 0.000000] BIOS-e820: 000000009f04c000 - 000000009f7dd000 (reserved)
[ 0.000000] BIOS-e820: 000000009f7dd000 - 000000009f800000 (usable)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed40000 - 00000000fed45000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100001000 - 000000043f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-D3H, BIOS F1 10/09/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-D1FFF write-protect
[ 0.000000] D2000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000043f000000 aka 17392M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 000000009f800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000009f800000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 009f800000 page 2M
[ 0.000000] kernel direct mapping tables up to 9f800000 @ 1fffe000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000043f000000
[ 0.000000] 0100000000 - 0400000000 page 1G
[ 0.000000] 0400000000 - 043f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 43f000000 @ 9f7fe000-9f800000
[ 0.000000] RAMDISK: 79bca000 - 7ffff000
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 000000009db97080 0007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 000000009db9cf90 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110413/tbfadt-560)
[ 0.000000] ACPI: DSDT 000000009db97190 05DFE (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 000000009dba6d80 00040
[ 0.000000] ACPI: APIC 000000009db9d088 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 000000009db9d100 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 000000009db9d148 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 000000009db9d188 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: IFEU 000000009db9d1c0 00042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: BGRT 000000009db9d208 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 000000009db9d240 006B2 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 000000009db9d8f8 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: IVRS 000000009db9ddb0 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
[ 0.000000] ACPI: CRAT 000000009db9de20 001F8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000043f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000043f000000
[ 0.000000] NODE_DATA [000000043effb000 - 000000043effffff]
[ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042ee00000-ffff88043c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0043f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0009d575
[ 0.000000] 0: 0x0009e9d3 -> 0x0009e9d4
[ 0.000000] 0: 0x0009ebda -> 0x0009f04c
[ 0.000000] 0: 0x0009f7dd -> 0x0009f800
[ 0.000000] 0: 0x00100001 -> 0x0043f000
[ 0.000000] On node 0 totalpages: 4049304
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 627267 pages, LIFO batch:31
[ 0.000000] Normal zone: 46536 pages used for memmap
[ 0.000000] Normal zone: 3357239 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x15] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009d575000 - 000000009d856000
[ 0.000000] PM: Registered nosave memory: 000000009d856000 - 000000009dbae000
[ 0.000000] PM: Registered nosave memory: 000000009dbae000 - 000000009e9d3000
[ 0.000000] PM: Registered nosave memory: 000000009e9d4000 - 000000009ebda000
[ 0.000000] PM: Registered nosave memory: 000000009f04c000 - 000000009f7dd000
[ 0.000000] PM: Registered nosave memory: 000000009f800000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] Allocating PCI resources starting at 9f800000 (gap: 9f800000:5f400000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88043ec00000 s79360 r8192 d23040 u524288
[ 0.000000] pcpu-alloc: s79360 r8192 d23040 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3988427
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: gpt loglevel=7 rootdelay=10 initrd=/boot/initramfs_x86_64.img BOOT_IMAGE=/boot/vmlinuz_x86_64_lts
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 15793100k/17809408k available (4239k kernel code, 1612192k absent, 404116k reserved, 5184k data, 732k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 130023424 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 3593.482 MHz processor.
[ 0.030003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.96 BogoMIPS (lpj=35934820)
[ 0.030067] pid_max: default: 32768 minimum: 301
[ 0.030186] Security Framework initialized
[ 0.030219] AppArmor: AppArmor disabled by boot time parameter
[ 0.031478] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.038170] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.042321] Mount-cache hash table entries: 256
[ 0.042958] Initializing cgroup subsys cpuacct
[ 0.043012] Initializing cgroup subsys memory
[ 0.043055] Initializing cgroup subsys devices
[ 0.043086] Initializing cgroup subsys freezer
[ 0.043118] Initializing cgroup subsys net_cls
[ 0.043149] Initializing cgroup subsys blkio
[ 0.043215] tseg: 009f800000
[ 0.043216] CPU: Physical Processor ID: 0
[ 0.043248] CPU: Processor Core ID: 0
[ 0.043279] mce: CPU supports 7 MCE banks
[ 0.044338] ACPI: Core revision 20110413
[ 0.050017] ftrace: allocating 16878 entries in 67 pages
[ 0.060590] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.160953] CPU0: AMD A6-5400K APU with Radeon(tm) HD Graphics stepping 01
[ 0.170000] Performance Events: AMD Family 15h PMU driver.
[ 0.170000] ... version: 0
[ 0.170000] ... bit width: 48
[ 0.170000] ... generic registers: 6
[ 0.170000] ... value mask: 0000ffffffffffff
[ 0.170000] ... max period: 00007fffffffffff
[ 0.170000] ... fixed-purpose events: 0
[ 0.170000] ... event mask: 000000000000003f
[ 0.170000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.170000] Booting Node 0, Processors #1
[ 0.170000] smpboot cpu 1: start_ip = 99000
[ 7.443437] CPU1: Not responding.
[ 7.445038] Brought up 1 CPUs
[ 7.445164] Total of 1 processors activated (7186.96 BogoMIPS).
[ 7.449107] devtmpfs: initialized
[ 7.482442] PM: Registering ACPI NVS region at 9d856000 (3506176 bytes)
[ 7.486598] PM: Registering ACPI NVS region at 9e9d4000 (2121728 bytes)
[ 7.493031] NET: Registered protocol family 16
[ 7.496249] Extended Config Space enabled on 0 nodes
[ 7.496483] ACPI: bus type pci registered
[ 7.498432] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 7.498554] PCI: not using MMCONFIG
[ 7.498978] PCI: Using configuration type 1 for base access
[ 7.499066] PCI: Using configuration type 1 for extended access
[ 7.527324] bio: create slab <bio-0> at 0
[ 7.601576] ACPI: EC: Look up EC in DSDT
[ 7.685139] ACPI: Executed 1 blocks of module-level executable AML code
[ 7.830050] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 7.845972] ACPI: Interpreter enabled
[ 7.846060] ACPI: (supports S0 S3 S4 S5)
[ 7.847202] ACPI: Using IOAPIC for interrupt routing
[ 7.850557] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 7.851641] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 10.009318] ACPI: No dock devices found.
[ 10.009448] HEST: Table not found.
[ 10.009563] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 10.018400] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 10.028017] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
[ 10.028139] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
[ 10.028263] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
[ 10.028386] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 10.028508] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 10.028639] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 10.029075] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff]
[ 10.029299] pci 0000:00:00.0: [1022:1410] type 0 class 0x000600
[ 10.030321] pci 0000:00:00.2: [1022:1419] type 0 class 0x000806
[ 10.032320] pci 0000:00:01.0: [1002:9991] type 0 class 0x000300
[ 10.032465] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 10.032576] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 10.032990] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 10.034009] pci 0000:00:01.0: supports D1 D2
[ 10.034262] pci 0000:00:01.1: [1002:9902] type 0 class 0x000403
[ 10.034406] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
[ 10.035595] pci 0000:00:01.1: supports D1 D2
[ 10.036209] pci 0000:00:02.0: [1022:1412] type 1 class 0x000604
[ 10.037405] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 10.037463] pci 0000:00:02.0: PME# disabled
[ 10.038065] pci 0000:00:04.0: [1022:1414] type 1 class 0x000604
[ 10.039258] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 10.039316] pci 0000:00:04.0: PME# disabled
[ 10.040227] pci 0000:00:10.0: [1022:7812] type 0 class 0x000c03
[ 10.040423] pci 0000:00:10.0: reg 10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
[ 10.041630] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 10.041993] pci 0000:00:10.0: PME# disabled
[ 10.042315] pci 0000:00:10.1: [1022:7812] type 0 class 0x000c03
[ 10.042510] pci 0000:00:10.1: reg 10: [mem 0xfeb48000-0xfeb49fff 64bit]
[ 10.044002] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 10.044059] pci 0000:00:10.1: PME# disabled
[ 10.044424] pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
[ 10.044632] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
[ 10.045026] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
[ 10.045141] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
[ 10.045255] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
[ 10.045372] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
[ 10.045486] pci 0000:00:11.0: reg 24: [mem 0xfeb51000-0xfeb517ff]
[ 10.046377] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
[ 10.046528] pci 0000:00:12.0: reg 10: [mem 0xfeb50000-0xfeb50fff]
[ 10.047596] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
[ 10.048081] pci 0000:00:12.2: reg 10: [mem 0xfeb4f000-0xfeb4f0ff]
[ 10.049232] pci 0000:00:12.2: supports D1 D2
[ 10.049268] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 10.049324] pci 0000:00:12.2: PME# disabled
[ 10.049558] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
[ 10.050126] pci 0000:00:13.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
[ 10.051154] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
[ 10.051363] pci 0000:00:13.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
[ 10.052509] pci 0000:00:13.2: supports D1 D2
[ 10.052545] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 10.052603] pci 0000:00:13.2: PME# disabled
[ 10.053123] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
[ 10.054237] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
[ 10.054467] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 10.055437] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 10.055495] pci 0000:00:14.2: PME# disabled
[ 10.055640] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
[ 10.056993] pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
[ 10.057448] pci 0000:00:14.5: [1022:7809] type 0 class 0x000c03
[ 10.057598] pci 0000:00:14.5: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
[ 10.058964] pci 0000:00:18.0: [1022:1400] type 0 class 0x000600
[ 10.059537] pci 0000:00:18.1: [1022:1401] type 0 class 0x000600
[ 10.060476] pci 0000:00:18.2: [1022:1402] type 0 class 0x000600
[ 10.061308] pci 0000:00:18.3: [1022:1403] type 0 class 0x000600
[ 10.062308] pci 0000:00:18.4: [1022:1404] type 0 class 0x000600
[ 10.063128] pci 0000:00:18.5: [1022:1405] type 0 class 0x000600
[ 10.064976] pci 0000:01:00.0: [8086:10d3] type 0 class 0x000200
[ 10.065120] pci 0000:01:00.0: reg 10: [mem 0xfeac0000-0xfeadffff]
[ 10.065243] pci 0000:01:00.0: reg 14: [mem 0xfea00000-0xfea7ffff]
[ 10.065364] pci 0000:01:00.0: reg 18: [io 0xe000-0xe01f]
[ 10.065487] pci 0000:01:00.0: reg 1c: [mem 0xfeae0000-0xfeae3fff]
[ 10.066064] pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeabffff pref]
[ 10.066618] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 10.066975] pci 0000:01:00.0: PME# disabled
[ 10.067368] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 10.067531] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 10.067587] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 10.067969] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 10.068963] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 10.069068] pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
[ 10.069308] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 10.069469] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 10.070508] pci 0000:02:00.0: supports D1 D2
[ 10.070544] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 10.070602] pci 0000:02:00.0: PME# disabled
[ 10.071304] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 10.071465] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 10.071522] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 10.071601] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 10.072247] pci 0000:03:06.0: [1095:3114] type 0 class 0x000104
[ 10.072438] pci 0000:03:06.0: reg 10: [io 0xc040-0xc047]
[ 10.072558] pci 0000:03:06.0: reg 14: [io 0xc030-0xc033]
[ 10.072989] pci 0000:03:06.0: reg 18: [io 0xc020-0xc027]
[ 10.073069] pci 0000:03:06.0: reg 1c: [io 0xc010-0xc013]
[ 10.073186] pci 0000:03:06.0: reg 20: [io 0xc000-0xc00f]
[ 10.073303] pci 0000:03:06.0: reg 24: [mem 0xfe980000-0xfe9803ff]
[ 10.073420] pci 0000:03:06.0: reg 30: [mem 0xfe900000-0xfe97ffff pref]
[ 10.074010] pci 0000:03:06.0: supports D1 D2
[ 10.074426] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 10.074564] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 10.074621] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
[ 10.074981] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 10.074993] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 10.075032] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 10.075071] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 10.075108] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 10.075146] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 10.075183] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 10.075220] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 10.075413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.087428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 10.092229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 10.093609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 10.098972] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 10.105356] pci0000:00: ACPI _OSC control (0x1d) granted
[ 10.469632] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 10.473051] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 10.476159] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 10.479249] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 10.482314] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 10.485047] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 10.487433] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 10.490344] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 10.494044] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 10.494442] vgaarb: loaded
[ 10.494556] vgaarb: bridge control possible 0000:00:01.0
[ 10.496198] PCI: Using ACPI for IRQ routing
[ 10.574000] PCI: pci_cache_line_size set to 64 bytes
[ 10.575540] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 10.575579] reserve RAM buffer: 000000009d575000 - 000000009fffffff
[ 10.575976] reserve RAM buffer: 000000009e9d4000 - 000000009fffffff
[ 10.576002] reserve RAM buffer: 000000009f04c000 - 000000009fffffff
[ 10.576049] reserve RAM buffer: 000000009f800000 - 000000009fffffff
[ 10.576088] reserve RAM buffer: 000000043f000000 - 000000043fffffff
[ 10.579048] NetLabel: Initializing
[ 10.579161] NetLabel: domain hash size = 128
[ 10.579273] NetLabel: protocols = UNLABELED CIPSOv4
[ 10.580048] NetLabel: unlabeled traffic allowed by default
[ 10.580185] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 10.580995] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 10.583427] Switching to clocksource hpet
[ 10.586451] Switched to NOHz mode on CPU #0
[ 10.846011] pnp: PnP ACPI init
[ 10.846721] ACPI: bus type pnp registered
[ 10.851432] pnp 00:00: [bus 00-ff]
[ 10.851473] pnp 00:00: [io 0x0cf8-0x0cff]
[ 10.851513] pnp 00:00: [io 0x0000-0x03af window]
[ 10.851555] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 10.851596] pnp 00:00: [io 0x03b0-0x03df window]
[ 10.851637] pnp 00:00: [io 0x0d00-0xffff window]
[ 10.851678] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 10.851718] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 10.851759] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[ 10.851799] pnp 00:00: [mem 0x00000000 window]
[ 10.853412] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 10.854370] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 10.855576] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 10.855722] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 10.880640] pnp 00:02: [io 0x0010-0x001f]
[ 10.880679] pnp 00:02: [io 0x0022-0x003f]
[ 10.880718] pnp 00:02: [io 0x0063]
[ 10.880756] pnp 00:02: [io 0x0065]
[ 10.880795] pnp 00:02: [io 0x0067-0x006f]
[ 10.880834] pnp 00:02: [io 0x0072-0x007f]
[ 10.880873] pnp 00:02: [io 0x0080]
[ 10.880912] pnp 00:02: [io 0x0084-0x0086]
[ 10.880975] pnp 00:02: [io 0x0088]
[ 10.881014] pnp 00:02: [io 0x008c-0x008e]
[ 10.881052] pnp 00:02: [io 0x0090-0x009f]
[ 10.881387] pnp 00:02: [io 0x00a2-0x00bf]
[ 10.881422] pnp 00:02: [io 0x00b1]
[ 10.881458] pnp 00:02: [io 0x00e0-0x00ef]
[ 10.881494] pnp 00:02: [io 0x04d0-0x04d1]
[ 10.881529] pnp 00:02: [io 0x040b]
[ 10.881565] pnp 00:02: [io 0x04d6]
[ 10.881601] pnp 00:02: [io 0x0c00-0x0c01]
[ 10.881636] pnp 00:02: [io 0x0c14]
[ 10.881672] pnp 00:02: [io 0x0c50-0x0c51]
[ 10.881708] pnp 00:02: [io 0x0c52]
[ 10.881743] pnp 00:02: [io 0x0c6c]
[ 10.881779] pnp 00:02: [io 0x0c6f]
[ 10.881815] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 10.881851] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 10.881886] pnp 00:02: [io 0x0cd4-0x0cd5]
[ 10.881924] pnp 00:02: [io 0x0cd6-0x0cd7]
[ 10.881959] pnp 00:02: [io 0x0cd8-0x0cdf]
[ 10.881997] pnp 00:02: [io 0x0800-0x089f]
[ 10.882033] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 10.882376] pnp 00:02: [io 0x0000-0x000f]
[ 10.882401] pnp 00:02: [io 0x0b20-0x0b3f]
[ 10.882438] pnp 00:02: [io 0x0900-0x090f]
[ 10.882474] pnp 00:02: [io 0x0910-0x091f]
[ 10.882512] pnp 00:02: [io 0xfe00-0xfefe]
[ 10.882547] pnp 00:02: [io 0x0060-0x005f disabled]
[ 10.882583] pnp 00:02: [io 0x0064-0x0063 disabled]
[ 10.882619] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 10.882656] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 10.882692] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[ 10.882728] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[ 10.882763] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[ 10.882801] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[ 10.882836] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 10.884490] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 10.884616] system 00:02: [io 0x040b] has been reserved
[ 10.884742] system 00:02: [io 0x04d6] has been reserved
[ 10.884866] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 10.884988] system 00:02: [io 0x0c14] has been reserved
[ 10.885440] system 00:02: [io 0x0c50-0x0c51] has been reserved
[ 10.885563] system 00:02: [io 0x0c52] has been reserved
[ 10.885685] system 00:02: [io 0x0c6c] has been reserved
[ 10.885807] system 00:02: [io 0x0c6f] has been reserved
[ 10.885929] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 10.886375] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 10.886496] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[ 10.886619] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[ 10.886741] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[ 10.886863] system 00:02: [io 0x0800-0x089f] has been reserved
[ 10.886986] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 10.887433] system 00:02: [io 0x0900-0x090f] has been reserved
[ 10.887557] system 00:02: [io 0x0910-0x091f] has been reserved
[ 10.887679] system 00:02: [io 0xfe00-0xfefe] has been reserved
[ 10.887806] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 10.887928] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 10.888360] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 10.888468] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[ 10.888593] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 10.888715] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 10.888840] system 00:02: [mem 0xff000000-0xffffffff] has been reserved
[ 10.888981] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.892417] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 10.892456] pnp 00:03: [io 0x0220-0x0227]
[ 10.892494] pnp 00:03: [io 0x0228-0x0237]
[ 10.892534] pnp 00:03: [io 0x0a20-0x0a2f]
[ 10.893890] system 00:03: [io 0x0220-0x0227] has been reserved
[ 10.894018] system 00:03: [io 0x0228-0x0237] has been reserved
[ 10.894460] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 10.894605] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.901525] pnp 00:04: [dma 4]
[ 10.901565] pnp 00:04: [io 0x0000-0x000f]
[ 10.901629] pnp 00:04: [io 0x0081-0x0083]
[ 10.901667] pnp 00:04: [io 0x0087]
[ 10.901706] pnp 00:04: [io 0x0089-0x008b]
[ 10.901745] pnp 00:04: [io 0x008f]
[ 10.901784] pnp 00:04: [io 0x00c0-0x00df]
[ 10.902753] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 10.903004] pnp 00:05: [io 0x0070-0x0071]
[ 10.903394] pnp 00:05: [irq 8]
[ 10.904399] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 10.904582] pnp 00:06: [io 0x0061]
[ 10.905587] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 10.906373] pnp 00:07: [io 0x0010-0x001f]
[ 10.906408] pnp 00:07: [io 0x0022-0x003f]
[ 10.906444] pnp 00:07: [io 0x0044-0x005f]
[ 10.906481] pnp 00:07: [io 0x0072-0x007f]
[ 10.906517] pnp 00:07: [io 0x0080]
[ 10.906555] pnp 00:07: [io 0x0084-0x0086]
[ 10.906592] pnp 00:07: [io 0x0088]
[ 10.906627] pnp 00:07: [io 0x008c-0x008e]
[ 10.906663] pnp 00:07: [io 0x0090-0x009f]
[ 10.906699] pnp 00:07: [io 0x00a2-0x00bf]
[ 10.906735] pnp 00:07: [io 0x00e0-0x00ef]
[ 10.906771] pnp 00:07: [io 0x04d0-0x04d1]
[ 10.908470] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 10.908615] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.908803] pnp 00:08: [io 0x00f0-0x00ff]
[ 10.908895] pnp 00:08: [irq 13]
[ 10.910515] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 10.912466] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.916697] pnp 00:0a: [mem 0xa0000000-0xbfffffff]
[ 10.918472] system 00:0a: [mem 0xa0000000-0xbfffffff] has been reserved
[ 10.918619] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.920584] pnp 00:0b: [mem 0xfeb80000-0xfebfffff]
[ 10.922399] system 00:0b: [mem 0xfeb80000-0xfebfffff] has been reserved
[ 10.922543] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.927499] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[ 10.928848] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 10.928958] pnp: PnP ACPI: found 13 devices
[ 10.929375] ACPI: ACPI bus type pnp unregistered
[ 10.990732] PCI: max bus depth: 1 pci_try_num: 2
[ 10.990936] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 10.991384] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 10.991521] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 10.991658] pci 0000:00:02.0: bridge window [mem pref disabled]
[ 10.991821] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 10.991949] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 10.992386] pci 0000:00:04.0: bridge window [mem disabled]
[ 10.992514] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 10.992683] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 10.992810] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 10.992960] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
[ 10.993389] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 10.993675] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.993815] pci 0000:00:02.0: setting latency timer to 64
[ 10.993994] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.994461] pci 0000:00:04.0: setting latency timer to 64
[ 10.994566] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 10.994605] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 10.994644] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 10.994682] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 10.994721] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 10.994760] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 10.994799] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 10.994837] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 10.994876] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 10.994915] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 10.994954] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 10.994993] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 10.995032] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 10.995368] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
[ 10.995377] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
[ 10.995414] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
[ 10.995449] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
[ 10.995485] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[ 10.995523] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[ 10.995559] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
[ 10.996013] NET: Registered protocol family 2
[ 11.011431] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 11.044698] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 11.051435] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 11.051803] TCP: Hash tables configured (established 524288 bind 65536)
[ 11.051921] TCP reno registered
[ 11.052935] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 11.054372] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 11.056540] NET: Registered protocol family 1
[ 11.056817] pci 0000:00:01.0: Boot video device
[ 11.057014] pci 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 11.057627] pci 0000:00:10.0: PCI INT A disabled
[ 11.057906] pci 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 11.058488] pci 0000:00:10.1: PCI INT B disabled
[ 11.058705] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 11.150025] pci 0000:00:12.0: PCI INT A disabled
[ 11.150071] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 11.150124] pci 0000:00:12.2: PCI INT B disabled
[ 11.150160] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 11.240018] pci 0000:00:13.0: PCI INT A disabled
[ 11.240057] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 11.240102] pci 0000:00:13.2: PCI INT B disabled
[ 11.240147] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.330018] pci 0000:00:14.5: PCI INT C disabled
[ 11.330066] PCI: CLS 64 bytes, default 64
[ 11.330109] Unpacking initramfs...
[ 0.040000] Kernel panic - not syncing: smp_callin: CPU1 started up but did not get a callout!
[ 0.040000]
[ 0.040000] Pid: 0, comm: kworker/0:0 Not tainted 3.0.46-1-lts #1
[ 0.040000] Call Trace:
[ 0.040000] [<ffffffff8140f6cd>] panic+0x91/0x197
[ 0.040000] [<ffffffff8140884c>] start_secondary+0xcb/0x1fe
[ 26.201608] Freeing initrd memory: 102612k freed
[ 26.228111] pci 0000:00:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 26.228318] pci 0000:00:00.2: irq 40 for MSI/MSI-X
[ 26.228396] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 extended features: PreF PPR GT IA
[ 26.240635] AMD-Vi: Lazy IO/TLB flushing enabled
[ 26.240671] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 26.240706] Placing 64MB software IO TLB between ffff880099575000 - ffff88009d575000
[ 26.240743] software IO TLB at phys 0x99575000 - 0x9d575000
[ 26.241067] audit: initializing netlink socket (disabled)
[ 26.241110] type=2000 audit(1356177972.230:1): initialized
[ 26.250693] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 26.254005] VFS: Disk quotas dquot_6.5.2
[ 26.254149] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 26.254346] msgmni has been set to 31046
[ 26.254555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 26.254612] io scheduler noop registered
[ 26.254646] io scheduler deadline registered (default)
[ 26.254719] io scheduler cfq registered
[ 26.254848] pcieport 0000:00:02.0: setting latency timer to 64
[ 26.254910] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
[ 26.254987] pcieport 0000:00:04.0: setting latency timer to 64
[ 26.255045] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
[ 26.255142] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 26.255177] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 26.255212] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 26.255257] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 26.255291] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 26.255327] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 26.255434] ERST: Table is not found!
[ 26.255511] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 26.255875] Linux agpgart interface v0.103
[ 26.255970] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 26.256358] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.256395] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.256512] mousedev: PS/2 mouse device common for all mice
[ 26.256588] rtc_cmos 00:05: RTC can wake from S4
[ 26.256715] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 26.256781] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 26.256827] cpuidle: using governor ladder
[ 26.256868] cpuidle: using governor menu
[ 26.257182] TCP cubic registered
[ 26.257413] NET: Registered protocol family 10
[ 26.258198] NET: Registered protocol family 17
[ 26.258233] Registering the dns_resolver key type
[ 26.258395] PM: Hibernation image not present or could not be loaded.
[ 26.258450] registered taskstats version 1
[ 26.259761] rtc_cmos 00:05: setting system clock to 2012-12-22 12:06:13 UTC (1356177973)
[ 26.261125] Initializing network drop monitor service
[ 26.263013] Freeing unused kernel memory: 732k freed
[ 26.263239] Write protecting the kernel read-only data: 8192k
[ 26.272919] Freeing unused kernel memory: 1888k freed
[ 26.277038] Freeing unused kernel memory: 696k freed
[ 26.303407] systemd-udevd[37]: starting version 194
[ 27.541378] Refined TSC clocksource calibration: 3593.465 MHz.
[ 27.541426] Switching to clocksource tsc
[ 30.186206] HDA Intel 0000:00:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 30.186313] HDA Intel 0000:00:01.1: irq 43 for MSI/MSI-X
[ 30.186378] HDA Intel 0000:00:01.1: setting latency timer to 64
[ 30.191054] usbcore: registered new interface driver usbfs
[ 30.191133] usbcore: registered new interface driver hub
[ 30.197110] SCSI subsystem initialized
[ 30.216692] usbcore: registered new device driver usb
[ 30.220148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 30.232290] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 30.234124] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 30.239267] libata version 3.00 loaded.
[ 30.244294] ACPI: acpi_idle registered with cpuidle
[ 30.246226] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 30.246282] ACPI: Power Button [PWRB]
[ 30.246380] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 30.246418] ACPI: Power Button [PWRF]
[ 30.249692] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 30.249737] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 30.249802] e1000e 0000:01:00.0: Disabling ASPM L0s L1
[ 30.249846] e1000e 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 30.249902] e1000e 0000:01:00.0: setting latency timer to 64
[ 30.250227] e1000e 0000:01:00.0: irq 44 for MSI/MSI-X
[ 30.250263] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[ 30.250307] e1000e 0000:01:00.0: irq 46 for MSI/MSI-X
[ 30.252812] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 30.252873] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 30.252954] r8169 0000:02:00.0: setting latency timer to 64
[ 30.253001] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
[ 30.253103] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
[ 30.253760] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000187e000, 94:de:80:06:0b:c2, XID 0c900800 IRQ 47
[ 30.253799] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 30.255615] sata_sil 0000:03:06.0: version 2.4
[ 30.255694] sata_sil 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 30.255763] sata_sil 0000:03:06.0: Applying R_ERR on DMA activate FIS errata fix
[ 30.259490] scsi0 : sata_sil
[ 30.262529] scsi1 : sata_sil
[ 30.265318] scsi2 : sata_sil
[ 30.268147] scsi3 : sata_sil
[ 30.268259] ata1: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe980080 irq 20
[ 30.268301] ata2: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe9800c0 irq 20
[ 30.268350] ata3: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe980280 irq 20
[ 30.268389] ata4: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe9802c0 irq 20
[ 30.375388] e1000e 0000:01:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:0c:a8:da
[ 30.375437] e1000e 0000:01:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 30.375481] e1000e 0000:01:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-007
[ 30.620035] ata1: SATA link down (SStatus 0 SControl 310)
[ 30.970035] ata2: SATA link down (SStatus 0 SControl 310)
[ 31.320029] ata3: SATA link down (SStatus 0 SControl 310)
[ 31.670023] ata4: SATA link down (SStatus 0 SControl 310)
[ 31.674284] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 31.674524] HDMI: no space for converter 10
[ 31.674615] HDMI: no space for converter 12
[ 31.674967] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
[ 31.675144] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 31.776299] xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 31.776372] xhci_hcd 0000:00:10.0: setting latency timer to 64
[ 31.776418] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 31.776483] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 31.776563] QUIRK: Enable AMD PLL fix
[ 31.776792] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb4a000
[ 31.776885] xhci_hcd 0000:00:10.0: irq 48 for MSI/MSI-X
[ 31.776920] xhci_hcd 0000:00:10.0: irq 49 for MSI/MSI-X
[ 31.777146] xHCI xhci_add_endpoint called for root hub
[ 31.777190] xHCI xhci_check_bandwidth called for root hub
[ 31.777261] hub 1-0:1.0: USB hub found
[ 31.777297] hub 1-0:1.0: 2 ports detected
[ 31.777433] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 31.777473] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 31.780285] xHCI xhci_add_endpoint called for root hub
[ 31.780329] xHCI xhci_check_bandwidth called for root hub
[ 31.780399] hub 2-0:1.0: USB hub found
[ 31.780436] hub 2-0:1.0: 2 ports detected
[ 31.780543] xhci_hcd 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 31.780600] xhci_hcd 0000:00:10.1: setting latency timer to 64
[ 31.780635] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 31.780673] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 31.780929] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb48000
[ 31.781018] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
[ 31.781053] xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
[ 31.781245] xHCI xhci_add_endpoint called for root hub
[ 31.781289] xHCI xhci_check_bandwidth called for root hub
[ 31.781358] hub 3-0:1.0: USB hub found
[ 31.781393] hub 3-0:1.0: 2 ports detected
[ 31.781502] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 31.781554] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 31.784397] xHCI xhci_add_endpoint called for root hub
[ 31.784430] xHCI xhci_check_bandwidth called for root hub
[ 31.784493] hub 4-0:1.0: USB hub found
[ 31.784540] hub 4-0:1.0: 2 ports detected
[ 31.785260] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 31.785314] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 31.785363] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
[ 31.785405] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 31.785467] ehci_hcd 0000:00:12.2: debug port 1
[ 31.785526] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4f000
[ 31.800124] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 31.800381] hub 5-0:1.0: USB hub found
[ 31.800426] hub 5-0:1.0: 5 ports detected
[ 31.800575] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 31.800648] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 31.800698] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
[ 31.800740] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 31.800804] ehci_hcd 0000:00:13.2: debug port 1
[ 31.800861] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb4d000
[ 31.820016] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 31.820236] hub 6-0:1.0: USB hub found
[ 31.820271] hub 6-0:1.0: 5 ports detected
[ 31.820930] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 31.820996] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 31.821039] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 7
[ 31.821105] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb50000
[ 31.884261] hub 7-0:1.0: USB hub found
[ 31.884311] hub 7-0:1.0: 5 ports detected
[ 31.884462] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 31.884533] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 31.884580] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 8
[ 31.884644] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4e000
[ 31.944186] hub 8-0:1.0: USB hub found
[ 31.944235] hub 8-0:1.0: 5 ports detected
[ 31.944362] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 31.944416] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 31.944452] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9
[ 31.944510] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4c000
[ 32.004245] hub 9-0:1.0: USB hub found
[ 32.004283] hub 9-0:1.0: 2 ports detected
[ 32.004581] ahci 0000:00:11.0: version 3.0
[ 32.004627] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 32.004727] ahci 0000:00:11.0: irq 52 for MSI/MSI-X
[ 32.004892] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 7 ports 6 Gbps 0xfd impl SATA mode
[ 32.004931] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 32.009602] scsi4 : ahci
[ 32.009824] scsi5 : ahci
[ 32.010050] scsi6 : ahci
[ 32.010213] scsi7 : ahci
[ 32.010363] scsi8 : ahci
[ 32.010529] scsi9 : ahci
[ 32.010677] scsi10 : ahci
[ 32.010837] scsi11 : ahci
[ 32.011601] ata5: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 52
[ 32.012773] ata6: DUMMY
[ 32.012806] ata7: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51200 irq 52
[ 32.012845] ata8: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51280 irq 52
[ 32.012893] ata9: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51300 irq 52
[ 32.012930] ata10: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 52
[ 32.012969] ata11: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51400 irq 52
[ 32.013016] ata12: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51480 irq 52
[ 32.120025] usb 5-3: new high speed USB device number 2 using ehci_hcd
[ 32.274376] Initializing USB Mass Storage driver...
[ 32.274825] scsi12 : usb-storage 5-3:1.0
[ 32.274957] usbcore: registered new interface driver usb-storage
[ 32.274991] USB Mass Storage support registered.
[ 32.560018] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 32.560079] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 32.560137] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 32.560196] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 32.560242] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 32.560299] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 32.560580] ata7.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 32.560626] ata7.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 32.560947] ata11.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[ 32.560993] ata11.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 32.561209] ata7.00: configured for UDMA/133
[ 32.561773] ata11.00: configured for UDMA/133
[ 32.563779] ata8.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 32.563814] ata8.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 32.564285] ata5.00: ATA-6: WDC WD2500JD-00HBB0, 08.02D08, max UDMA/133
[ 32.564327] ata5.00: 488397168 sectors, multi 16: LBA48
[ 32.566291] ata10.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[ 32.566329] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 32.566492] ata12.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[ 32.566526] ata12.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 32.567782] ata8.00: configured for UDMA/133
[ 32.569759] ata5.00: configured for UDMA/133
[ 32.569893] scsi 4:0:0:0: Direct-Access ATA WDC WD2500JD-00H 08.0 PQ: 0 ANSI: 5
[ 32.570286] scsi 6:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
[ 32.570502] scsi 7:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[ 32.572474] ata10.00: configured for UDMA/133
[ 32.572682] ata12.00: configured for UDMA/133
[ 32.660017] usb 7-4: new low speed USB device number 2 using ohci_hcd
[ 32.868292] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.0/input/input4
[ 32.868415] generic-usb 0003:046D:C30F.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-4/input0
[ 32.881147] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.1/input/input5
[ 32.881240] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-4/input1
[ 32.881304] usbcore: registered new interface driver usbhid
[ 32.881338] usbhid: USB HID core driver
[ 33.271305] scsi 12:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 2
[ 33.280033] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 33.305314] ata9.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 33.305349] ata9.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 33.314972] ata9.00: configured for UDMA/133
[ 33.315074] scsi 8:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[ 33.315323] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
[ 33.315536] scsi 10:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[ 33.315746] scsi 11:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
[ 33.333300] sd 11:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 33.333360] sd 7:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 33.333415] sd 10:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 33.333463] sd 9:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 33.333524] sd 8:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 33.333575] sd 6:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 33.333613] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[ 33.333753] sd 10:0:0:0: [sdg] Write Protect is off
[ 33.333787] sd 10:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 33.333950] sd 8:0:0:0: [sde] Write Protect is off
[ 33.333984] sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 33.334046] sd 9:0:0:0: [sdf] Write Protect is off
[ 33.334079] sd 9:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 33.334138] sd 7:0:0:0: [sdc] Write Protect is off
[ 33.334172] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 33.334224] sd 11:0:0:0: [sdh] Write Protect is off
[ 33.334257] sd 11:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[ 33.334358] sd 10:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.334526] sd 6:0:0:0: [sdb] Write Protect is off
[ 33.334561] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 33.334629] sd 11:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.334808] sd 12:0:0:0: [sdd] 7837696 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 33.334865] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.334982] sd 9:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.335109] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.335222] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.335777] sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 33.335862] sd 12:0:0:0: [sdd] Write Protect is off
[ 33.335896] sd 12:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 33.336251] sd 4:0:0:0: [sda] Write Protect is off
[ 33.336285] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.336346] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.336757] sd 12:0:0:0: [sdd] No Caching mode page present
[ 33.336792] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[ 33.339872] sd 12:0:0:0: [sdd] No Caching mode page present
[ 33.339909] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[ 33.344926] sdd: sdd1
[ 33.347492] sd 12:0:0:0: [sdd] No Caching mode page present
[ 33.347539] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[ 33.347574] sd 12:0:0:0: [sdd] Attached SCSI removable disk
[ 33.376773] sde: sde1
[ 33.377154] sd 8:0:0:0: [sde] Attached SCSI disk
[ 33.377403] sdh: sdh1
[ 33.377691] sd 11:0:0:0: [sdh] Attached SCSI disk
[ 33.380652] sdg: sdg1
[ 33.381033] sd 10:0:0:0: [sdg] Attached SCSI disk
[ 33.395456] sdf: sdf1
[ 33.395801] sd 9:0:0:0: [sdf] Attached SCSI disk
[ 33.397545] sdb: sdb1
[ 33.397930] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 33.435935] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 33.436519] sd 4:0:0:0: [sda] Attached SCSI disk
[ 33.439473] mdadm: sending ioctl 800c0910 to a partition!
[ 33.439519] mdadm: sending ioctl 800c0910 to a partition!
[ 33.439696] mdadm: sending ioctl 1261 to a partition!
[ 33.439728] mdadm: sending ioctl 1261 to a partition!
[ 33.442061] mdadm: sending ioctl 1261 to a partition!
[ 33.442108] mdadm: sending ioctl 1261 to a partition!
[ 33.442467] mdadm: sending ioctl 1261 to a partition!
[ 33.442502] mdadm: sending ioctl 1261 to a partition!
[ 33.443944] mdadm: sending ioctl 1261 to a partition!
[ 33.443981] mdadm: sending ioctl 1261 to a partition!
[ 33.815407] sdc: sdc1
[ 33.815744] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 33.819038] md: bind<sdg1>
[ 33.823005] md: bind<sdh1>
[ 33.830376] md: bind<sde1>
[ 33.832743] md: raid0 personality registered for level 0
[ 33.833265] bio: create slab <bio-1> at 1
[ 33.833302] md/raid0:md127: looking at sdh1
[ 33.833336] md/raid0:md127: comparing sdh1(3907026944) with sdh1(3907026944)
[ 33.833414] md/raid0:md127: END
[ 33.833446] md/raid0:md127: ==> UNIQUE
[ 33.833478] md/raid0:md127: 1 zones
[ 33.833511] md/raid0:md127: looking at sdg1
[ 33.833554] md/raid0:md127: comparing sdg1(3907026944) with sdh1(3907026944)
[ 33.833623] md/raid0:md127: EQUAL
[ 33.833655] md/raid0:md127: FINAL 1 zones
[ 33.833689] md/raid0:md127: done.
[ 33.833733] md/raid0:md127: md_size is 7814053888 sectors.
[ 33.833766] ******* md127 configuration *********
[ 33.833798] zone0=[sdg1/sdh1/]
[ 33.833947] zone offset=0kb device offset=0kb size=3907026944kb
[ 33.833988] **********************************
[ 33.833992]
[ 33.835269] md127: detected capacity change from 0 to 4000795590656
[ 33.838003] md: bind<sdb1>
[ 33.842049] md: bind<sdf1>
[ 33.844170] md127: unknown partition table
[ 33.924815] md: bind<sdc1>
[ 34.090011] raid6: int64x1 1791 MB/s
[ 34.260030] raid6: int64x2 2819 MB/s
[ 34.430025] raid6: int64x4 2663 MB/s
[ 34.600019] raid6: int64x8 2518 MB/s
[ 34.770025] raid6: sse2x1 5795 MB/s
[ 34.940016] raid6: sse2x2 8139 MB/s
[ 35.110014] raid6: sse2x4 10354 MB/s
[ 35.110047] raid6: using algorithm sse2x4 (10354 MB/s)
[ 35.110907] async_tx: api initialized (async)
[ 35.111085] xor: automatically using best checksumming function: generic_sse
[ 35.160010] generic_sse: 5798.000 MB/sec
[ 35.160043] xor: using function: generic_sse (5798.000 MB/sec)
[ 35.161180] md: raid6 personality registered for level 6
[ 35.161216] md: raid5 personality registered for level 5
[ 35.161249] md: raid4 personality registered for level 4
[ 35.162194] md/raid:md126: device sdc1 operational as raid disk 3
[ 35.162258] md/raid:md126: device sdf1 operational as raid disk 1
[ 35.162302] md/raid:md126: device sdb1 operational as raid disk 0
[ 35.162337] md/raid:md126: device sde1 operational as raid disk 2
[ 35.162969] md/raid:md126: allocated 4272kB
[ 35.164323] md/raid:md126: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 35.164368] RAID conf printout:
[ 35.164401] --- level:5 rd:4 wd:4
[ 35.164434] disk 0, o:1, dev:sdb1
[ 35.164472] disk 1, o:1, dev:sdf1
[ 35.164514] disk 2, o:1, dev:sde1
[ 35.164547] disk 3, o:1, dev:sdc1
[ 35.164615] md126: detected capacity change from 0 to 6000789159936
[ 35.210084] md126: unknown partition table
[ 37.116016] device-mapper: uevent: version 1.0.3
[ 37.116160] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[ 48.147927] systemd[1]: systemd 194 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 48.148113] systemd[1]: Running in initial RAM disk.
[ 48.148564] systemd[1]: Set hostname to <archboot>.
[ 48.148763] systemd[1]: Initializing machine ID from random generator.
[ 48.163323] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 48.163530] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 48.163664] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 48.163714] systemd[1]: Starting Remote File Systems.
[ 48.164039] systemd[1]: Reached target Remote File Systems.
[ 48.164095] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 48.164379] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 48.164429] systemd[1]: Starting Delayed Shutdown Socket.
[ 48.164734] systemd[1]: Listening on Delayed Shutdown Socket.
[ 48.164802] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 48.165217] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 48.165268] systemd[1]: Starting Encrypted Volumes.
[ 48.165538] systemd[1]: Reached target Encrypted Volumes.
[ 48.165666] systemd[1]: Starting udev Kernel Socket.
[ 48.165964] systemd[1]: Listening on udev Kernel Socket.
[ 48.166045] systemd[1]: Starting udev Control Socket.
[ 48.166338] systemd[1]: Listening on udev Control Socket.
[ 48.166395] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 48.166498] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 48.166557] systemd[1]: Starting Swap.
[ 48.166826] systemd[1]: Reached target Swap.
[ 48.166869] systemd[1]: Starting Journal Socket.
[ 48.167200] systemd[1]: Listening on Journal Socket.
[ 48.167260] systemd[1]: Started File System Check on Root Device.
[ 48.167303] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 48.168421] systemd[1]: Starting Load Kernel Modules...
[ 48.170881] systemd[1]: Starting Setup Virtual Console...
[ 48.173799] FS-Cache: Loaded
[ 48.177917] systemd[1]: Mounting POSIX Message Queue File System...
[ 48.179690] systemd[1]: Mounting Huge Pages File System...
[ 48.180633] systemd[1]: Starting Apply Kernel Variables...
[ 48.181486] systemd[1]: Started Set Up Additional Binary Formats.
[ 48.181595] systemd[1]: Starting udev Kernel Device Manager...
[ 48.184266] systemd[1]: Mounting Debug File System...
[ 48.185010] systemd[1]: Starting udev Coldplug all Devices...
[ 48.185722] systemd[1]: Starting Journal Service...
[ 48.186733] systemd[1]: Started Journal Service.
[ 48.187650] systemd[1]: Started Remount Root and Kernel File Systems.
[ 48.187720] systemd[1]: Starting Local File Systems (Pre).
[ 48.187982] systemd[1]: Reached target Local File Systems (Pre).
[ 48.188037] systemd[1]: Mounting /tmp...
[ 48.188726] systemd[1]: Starting Load Random Seed...
[ 48.199278] systemd-udevd[1369]: starting version 194
[ 48.259482] RPC: Registered named UNIX socket transport module.
[ 48.259519] RPC: Registered udp transport module.
[ 48.259552] RPC: Registered tcp transport module.
[ 48.259595] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 48.264576] FS-Cache: Netfs 'nfs' registered for caching
[ 48.270453] systemd-modules-load[1361]: Inserted module 'nfs'
[ 48.275596] systemd-journald[1372]: Received SIGUSR1
[ 48.653395] scsi_verify_blk_ioctl: 184 callbacks suppressed
[ 48.653431] mdadm: sending ioctl 1261 to a partition!
[ 48.653475] mdadm: sending ioctl 1261 to a partition!
[ 48.653686] mdadm: sending ioctl 1261 to a partition!
[ 48.653725] mdadm: sending ioctl 1261 to a partition!
[ 94.390769] r8169 0000:02:00.0: eth0: link down
[ 94.390805] r8169 0000:02:00.0: eth0: link down
[ 94.391909] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 96.827209] r8169 0000:02:00.0: eth0: link up
[ 96.828288] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 107.460005] eth0: no IPv6 routers present
and /proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A6-5400K APU with Radeon(tm) HD Graphics
stepping : 1
cpu MHz : 3593.482
cache size : 1024 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 16
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rditbane wrote:
Sorry fore double-posting, but there's something new:
At beginning, the PC continued booting after throwing this issue. But now, Booting sometimes just stops at the very moment when the CPU is not responding.
...sounds like a hardware problem to me given the sporadic nature. -
When I open my Mail program over the last few days it does nothing - does not even show the Mail Message Window. I have to Force Quit (message says Mail Not Responding). This happens over and over again. I used Disk Utility to check preferences and repaired all (not much there and nothing relating to Mail). Still won't work. In general Apple Mail has not been working well for awhile that along with MobileMe... delivering multiple emails of the same message and loosing Sent messages. What is happening to this program? Do I have to use Microsoft Office to find a dependable eMail Client software? As it stands I have started using Office on our other computers just so we can receive our email and not worry about loosing or storing Sent and Received Mail.
I am running Mac OS X Leopard 10.5.8 on my workstation. I have Snow Leopard ready to install but was waiting to complete time critical work before installing new system software - perhaps that will be the answer to the problem(?). Anyone having this problem and if so - have you found a solution?
Note: I do receive mail on my iPhone and on iPad thankfully using Apple's Mail program but those are mobile devices - we require dependable email to run our business on our desktops.Mail in Leopard should not have such problems. Disk Utility repairs permissions, not preferences. I'm assuming your only e-mail account is with Mobileme?
-
After installing Mavericks, my computer is slow/not responding
After installing Mavericks, my computer is not responding and reacting as quickly as (I think) it should. Here are the EtreCheck results. Any help would be much appreciated. Thanks in advance!
Hardware Information:
iMac (27-inch, Mid 2010)
iMac - model: iMac11,3
1 2.93 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
ATI Radeon HD 5750 - VRAM: 1024 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 9:55:48
Disk Information:
Hitachi HDS722020ALA330 disk0 : (2 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 2 TB (1.25 TB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information:
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
FireWire Information:
WD My Book 111D 800mbit - 800mbit max
disk1s1 (disk1s1) <not mounted>: 32 KB
My Book (disk1s3) /Volumes/My Book: 1 TB (30.96 GB free)
Thunderbolt Information:
Kernel Extensions:
com.kaspersky.kext.klif (3.0.2d39)
com.kaspersky.nke (1.0.2d43)
com.kaspersky.kext.kimul.44 (44)
Startup Items:
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist 3rd-Party support link
[loaded] com.adobe.SwitchBoard.plist 3rd-Party support link
[loaded] com.kaspersky.kav.plist 3rd-Party support link
[loaded] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[invalid] com.oracle.java.Helper-Tool.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[loaded] com.adobe.CS5ServiceManager.plist 3rd-Party support link
[loaded] com.divx.dms.agent.plist 3rd-Party support link
[loaded] com.divx.update.agent.plist 3rd-Party support link
[loaded] com.kaspersky.kav.gui.plist 3rd-Party support link
[invalid] com.oracle.java.Java-Updater.plist
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
[loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
Scroll Reverser
Scroll Reverser
iTunesHelper
EEventManager
Dropbox
AdobeResourceSynchronizer
EEventManager
ConnectService
Internet Plug-ins:
Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
OVSHelper: Version: 1.1 3rd-Party support link
NP_2020Player_WEB: Version: 5.0.94.0 - SDK 10.6 3rd-Party support link
RealPlayer Plugin: Version: (null) 3rd-Party support link
AdobePDFViewerNPAPI: Version: 11.0.02 - SDK 10.6 3rd-Party support link
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
Flash Player: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 9.5.5 3rd-Party support link
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
Unity Web Player: Version: UnityPlayer version 2.6.1f3 3rd-Party support link
3rd Party Preference Panes:
Fan Control 3rd-Party support link
Flash Player 3rd-Party support link
Perian 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
/Library/Application Support/DivX
DivXUpdate: Version: 1.0 - SDK 10.5 3rd-Party support link
DivXMediaServer: Version: 10.0 - SDK 10.5 3rd-Party support link
DivXTransferWizard: Version: 10.0.0 (Build 10.0.1.41) - SDK 10.5 3rd-Party support link
DMSLaunch: Version: 1.0 - SDK 10.5 3rd-Party support link
SketchUp: Version: 8.0 - SDK 10.5 3rd-Party support link
/Applications/Google SketchUp 8/SketchUp.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Wondershare Helper Compact: Version: 2.2.3.1 - SDK 10.5 3rd-Party support link
/Users/christophermcgreger/Library/Application Support/Helper/Wondershare Helper Compact.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
FacebookVideoCalling: Version: 1.2.0.157 - SDK 10.5 3rd-Party support link
/Users/christophermcgreger/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
Wondershare AllMyTube: Version: 3.2.4 - SDK 10.5 3rd-Party support link
/Applications/Wondershare AllMyTube/Wondershare AllMyTube.app
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 2 Disk used: 696.37 GB
Destinations:
My Book [Local]
Total size: 931.36 GB
Total number of backups: 51
Oldest backup: 2013-07-17 12:40:03 +0000
Last backup: 2014-01-05 23:55:06 +0000
Size of backup disk: Too small
Backup size 931.36 GB < (Disk used 696.37 GB X 3)
Data [Network] (Last used)
Total size: 3
Total number of backups: 53
Oldest backup: 2013-07-16 22:38:22 +0000
Last backup: 2014-01-05 22:50:13 +0000
Size of backup disk: Adequate
Backup size 3 > (Disk used 696.37 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
11% mds
3% WindowServer
2% diskimages-helper
1% EtreCheck
1% kav
Top Processes by Memory:
524 MB mds_stores
360 MB kav
246 MB com.apple.IconServicesAgent
213 MB com.apple.MediaLibraryService
164 MB Finder
Virtual Memory Information:
10.45 GB Free RAM
3.44 GB Active RAM
851 MB Inactive RAM
1.27 GB Wired RAM
918 MB Page-ins
0 B Page-outsCrassBrauer wrote:
... With the latest software updates for OS X, I've read that anti-virus software is largely superfluous for Mac. Any opinions to the contrary/negative experiences?
Almost. Anti-virus software is completely superfluous for Mac.
I have tested most of the commonly available Mac "anti-virus" products under controlled conditions. The only differences between them are their varying degree of worthlessness. Some are malicious and will corrupt your Mac. The vast majority of Mac problems reported on this site are the direct result of using such products.
OS X already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Disable Java in Safari > Preferences > Security.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind. -
IWeb not responding - have tried all suggestions in this section
I have 4 websites stored in iWeb o9 on a brand new MacBook Pro running all current software and updates. I publish via ftp directly to my domains. I am a Mobile Me user but I do not use this for websites. I do not have the actual files on my desktop. They are embedded in iWeb I am assuming.
Yesterday I went to open iWeb to work on a website and the program would not open. I get a 'not responding' error when I 'option-command-escape' after a lengthy period of time lapsing with no response.
I spent all day yesterday and the better part of this morning following all advice found here. Still nothing.
If i reinstall iWeb 09 from the disk that came with computer, will that erase all my sites? I have copied the 'Domain' file to my desktop just in case and have backed up using Time Machine.
If re installation does indeed wipe it clean, how then should I replace the sites/files?
TIA
Lynndakazzez wrote:
I spent all day yesterday and the better part of this morning following all advice found here.
Lynn ~ Including this?...
_iWeb & iWork: Applications may suddenly quit after updating to Mac OS X v10.6.2_
...If so, before reinstalling iWeb, the Console app in the +Applications > Utilities+ folder may help to pinpoint the problem. See this Macworld article:
_Tracking down trouble with the Console_
There’s also this Apple doc:
Mac OS X: How to troubleshoot a software issue -
Hi,
I have spent a whole and very frustrating day trying to solve the following problem and in exasperation I resort to a posting here. Note no changes had been made to the phone prior to the start of the problem.
My Blackberry 9800 Torch freezes on power-up. It can only be ‘unfrozen’ by taking out the battery or, if left alone, after many minutes it comes up with the white screen, ‘App Error 602' and ‘Reset’ which is highlighted. Resetting has the same effect as taking out the battery. After each restart, it goes through the usual security and time checks and then freezes again. However, on rare occasions I got the message “Uncaught exception: Application net_rim_bb_messaging_app(144) is not responding; process terminated”.
Soon after the restart, after the Security Software Verification and on confirming the time/date, there is a very small window of opportunity (literally a couple of seconds) to access the phone. After much trial and error, I discovered that (in Manage Connections) by disabling the Mobile Network and WiFi - effectively putting it into ‘aeroplane mode’ - the device would work, without any problem and indefinitely. Except, of course, I couldn’t access the phone network nor the internet, which isn’t helpful(!).
I have taken this opportunity to do a full back-up on to my PC, through BlackBerry Desktop Software (though I’m not sure this backs up downloaded Apps??). Separately, I've also copied all the subdirectories from the phone’s memory and media card on to the PC, retaining their correct structures (but presumably also copying the corruption causing the problem?).
Any ideas???
- thanks in advance!The method you are attempting is the automatic method...sometimes it just doesn't work, and you must take control. The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Exchange Server not responding - please try later
Hi there
Can anyone please help with my E75.
I have had the phone over a year and since day 1 it has syncd perfectly well with my Outlook at work.
Until a couple of days ago!!!
Since then, it has refused to sync my calendar and contacts. It is still syncing e mail but about half way through the syncing process (once it has synced the e mails) I get the error message “exchange server not responding – please try later”.
I have asked my work IT helpdesk but they have said speak to the mobile provider. They also said there’s nothing wrong with their servers but I got the feeling they hadn’t really checked.
My problem is that I don’t know where to start.
Is the problem to do with:-
My phone?
Its settings?
Orange’s servers?
My work’s servers?
Nokia’s servers?
I’m confused – please help.
Ps I can’t believe it is my phone's settings as I haven’t changed these and it worked fine for a year. And, anyway, my credentials must be ok because it is still syncing my e mails.
Thanks in advance
Ianhi
as i am still facing this problem also from couple of day one of my customers was complaining about yahoo messenger version 9 couldnt sign in after i make good troubleshooting i fond a massage in yahoo site and the massage is '
Yahoo! Search Search:
Welcome, ksatcw[Sign Out, My Account]
Messenger Home -
Help
Go Back to Yahoo! Messenger
Yahoo! Messenger > Yahoo! Messenger > Messenger9 > Messenger
Is my Use Proxies Enable HTTP Proxy setting the reason why I cant sign into the Yahoo! Messenger Beta?
Yes. If your connection to the internet requires proxy authentication, then you won't be able to sign in with the current version of Yahoo! Messenger Beta. Instead, we recommend using Messenger version 8.1 for now. Sorry for the inconvenience! And thanks for reaching out early for the Beta. Well get this resolved as soon as possible.
Email this page Print this page
Was this article helpful?
Yes
No
Contact Customer Care Click to contact Customer Care for further assistance.
Top Questions
Questions about the closure of Yahoo! Messenger version 5.6?
Why do I need to upgrade to Yahoo! Messenger 9.0 if I have a firewall?
How do I install Yahoo! Messenger?
How do I configure my firewall/proxy server?
Yahoo! Messenger crashes when I launch it.
but if i disable my proxy the working fine without any problem and what i think is yahoo service the change some settings which not compatible with proxy settings or server . -
ITunes Not Responding/Cannot Sync iPhone since Firmware 3.0
Since I installed 3.0 on my iPhone, iTunes keeps crashing when i connect my iPhone, i can no longer sync it with iTunes. When I connect the iPhone, iTunes stops responding.
I have restarted my PC and my iPhone and have even un-installed and re-installed iTunes from my PC.
It is really frustrating because i recently trialed Mobile Me but decided to cancel the trail as i didnt feel i would use it, after i cancelled my account i lost ALL my contacts and calandar entries and need to sync my iPhone with Outlook to get them back.
I have not downloaded any Podcasts, I have uninstalled anything i downloaded on my Lappy since the last time my iPhone worked with iTunes and nothing I do helps.
It's soooo annoying!
Please help!
Thanks.
Mac.I am running Vista and have the not responding ever since Itunes went to 8. I do not subscribe to podcasts, TV shows or anything but music and removing the rest from preferences makes no difference.
If I have my iPhone plugged in before I start iTunes then I can very occassionally get it to work but most of the time it fails.
I have noticed that if iTunes starts accessing the Store then it will sync the iPhone but otherwise it stops responding. Restarting the Apple Mobile Device service makes no difference.
iTunes works fine with my Nano 8Gb.
Maybe you are looking for
-
How do i know if its set on disk mode?
how do i know if my ipod is on disk mode? can i see it on my ipod? itunes wont open when i plug the ipod in th computer and if i have itunes open and then plug in the ipod it just frezes (itunes) and i clikc ctrlaltdelete and it says 'no answer' (or
-
Restore tablespace in RMAN is not working
Friends, OS: RHEL AS 3.0 DB: 9iR2 New to RMAN I am testing RMAN in our R&D server. I just deleted one table in scott which is in the users tablespace. then i went to rman. SQL 'ALTER TABLESPACE users OFFLINE IMMEDIATE'; RESTORE TABLESPACE users; RECO
-
hai friends, can u pls explain this query. which is used in BW ABAP query. and can u pls explain how MDX statement is executed. FUNCTION Y_SR_EXP_TEST. ""Local Interface: *" IMPORTING *" VALUE(/AGS/CT_PRTID) TYPE /B247/OICT_PRTID OPTIONAL *
-
When opening MacBok Pro lid when attached to AC power, the computer shuts down.
When opening MacBok Pro lid when attached to AC power, the computer shuts down. This doesn't happen when it is using only battery power.
-
There's some background info to give on this issue first. Last week my internet connection had a brain ****. Opening a browser would just give me a strange page that appeared to be from Comcast (my ISP). The page told me to download a Comcast install