My mobile switch off automatically

Hi,
I bought Nokia Asha 501 two weeks back  it automatically get switched off when i keep in pocket and sits down for a while. Not sure whether it automatically press down on/off switch. But it often happens  when i keep in pocket and sit .When i try to switch it ON it gets ON and immediately switches OFF again.
Could you please advise what would be the problem. it's a new phone.
Thanks
Prashanth Kumar

Hi,
No this does not happen in flat surface or in table, it only happens while in pocket and sit. To some extent i agree the issue might be due to some pressure in the battery contact.But when i switch ON it gets ON and after loading application it gets switched off automatically . Then i have to take out the back panel and battery then it switches ON.
Please suggest me how to avoid this situation.

Similar Messages

  • HT4623 my mobile switches off automatically with "no service " and then i get message to restore my iphone 3 .. what should i do?

    my mobile switches off automatically with "no service " and then i get message to restore my iphone 3 .. what should i do?

    Hey jayashri,
    I'd give restoring a shot, but I'd make sure to back up your content first. You can read about how to do both things in the following article:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Best,
    Delgadoh

  • How to switch off automatic creation of the business partner?

    Hello!
    Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

    Hi,
    I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
    1. Set BP Role Category for Direction BP to Customer
    Roles: FLCU00 - Business Partner FI Customer (FS: BP)
    FLCU01 - Business Partner Customer (FS: BP)
    2. Defined the Number assignment for Direction BP to customer
    4. Customer account group and numbering is also defined.
    3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
    Kindly let me know if any customizing I have missed.
    Regards
    Ameya

  • Does anybody no how to switch off automatic updates on the iphone 5.

    Does anybody no how to switch off automatic updates on the iphone 5 many thanks was1521 UK.

    The reason i asked about automatic updates was because my provider 02 told me about it they said turn it off or get something called a Bolt-on which would provide me with so much internet data at a set price so thanks for your reply Kilted Tim.

  • Iphone 4 switch off automatically

    My iphone 4 switch off automatically & nowadays work only when its charging..and the power button is not working ..Is any one facing the same problem and whats the solution...its becoming waste for me.
    Regards
    Srinivas

    Hardware problem.

  • My iphone5 is getting troublesome after installing that ios7 it goes blank and gets switched off automatically pls help, My iphone5 is getting troublesome after installing that ios7 it goes blank and gets switched off automatically pls help

    My iPhone 5 is getting hanged after installing ios7 and gets switched off automatically when ever I type and shows vertical black bars fading to getting it switched off.some freezing screen also happen kindly help. Thanks

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • HT2471 Wifi trouble- keeps switching off automatically.. Help

    Hi
    Currently using an imac late 2009 with updated OX lion 10.7.4- Having trouble with the wifi, it switches off automatically every 5 to 10 mins but doesn't prompt me for a password when I switch back on. Appreciate any help out there. thank you!

    Hey G,
    This is a common problem with wifi. The obvious answer is that your channel you have setup your WLAN on is experiencing noise from the surrounding devices (including other dodgy routers) and interferring with the signal.
    Try changing your channel number on your router to another channel, usually automatically set to 11. I had no end of problems exactly like this but as soon as I changed channels, not a single drop even after three months.

  • 6300 switching off Automatically...

    My phone (6300) is switching off automatically....
    When I change the sim card to another operator, its working fine.... No problem at all.... only my sim card is not working properly.... please help me....

    If it's your sim card that is not working properly then you need to contact your network operator and ask them to replace it. Some sim cards have compatibility issues, especially old sim cards.
    If other sims work ok in your phone then it's obviously your sim card that has the problem, not the phone.

  • IPhone 3G switches off automatically

    My iphone 3G switches off automatically when the carrier GSM signal is very low. Has anybody faced this problem? If so please let me know about the possible solution. Thanks.

    No, it never works no matter where I am, its stuck. I haven't had 3G no matter where I've been for over a month now. I am sitting right next to other iphone users whose phone is on 3G with good signal strength (same iphone 3g and sw I'm running). It's always gotten 3G at my house, now it never stays on. I'm running the most recent SW. In Network settings I can switch it on, but the second I leave the screen it switches off. So annoying because I get feedback from computers and tv and it's SLOW!

  • IPhone 4 switches off automatically

    The Iphone keeps on switching off automatically. I restored the phone once and it worked and it switched off again and when I put it to restore again it says it cannot be restored.
    What can I doto switch the phone on again? It does not switc on even after pressing the switch on button.

    Try the iPhone forum:
    https://discussions.apple.com/community/iphone/using_iphone

  • My iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% batt

    my iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% battery what would i do im very tensed please help ...

    Hello s0ha1b
    If all you get is the Apple logo and it powering off, then the next step is to put your iPhone into recovery mode and then use iTunes to restore it. If you have a back up, then you can put that on there to once the restore is complete.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • My phone(4s) switches off automatically at 20% and doesnt start till i cahrge it,and once i put it on charge it shows batterl level 28%,earlier my battery wud drain till 1% then it used to switch off please help

    my phone(4s) switches off automatically at 20% and doesnt start till i cahrge it,and once i put it on charge it shows batterl level 28%,earlier my battery wud drain till 1% then it used to switch off please help

    These are usually the features of a faulty battery. Restore iPhone Firmware with iTunes 10.7 or 11 on computer. See if better. If not, and there is Warranty or AppleCare make Genius reservation and take iPhone to Apple for resolution. If no Coverage, still make Genius reservation and take iPhone to Apple Store for free quick (minutes time) battery diagnostic testing.

  • The bettry of my i pad was too low finally it was switched off automatically then i putted on charging but the charging is started after 5% it went on automatically after apple logo and shut down suddnly plz help me what i have to do i restarted but same

    i putted my low bettry i pad on charging but after 5% bettry it is goint to switch off automatically after apple logo and then suddnlywent switched off .i restarted again and again but the result are the same i need urgent help plz

    Hi there shehla sattar,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/ts3274
    -Griff W.

  • MY IPHONE 4 16GB IT SWITCHES OFF AUTOMATICALLY EVEN WHEN I HAVE MORE THAN 60% BATTERY AND WHEN I CONNECT IT TO MY LAPTOP IT RESTARTS WHAT COULD BE THE REASON PLS SPECIFY AND SOLUTIONS FOR IT SHOULD I VISIT AN APPLE STORE FOR IT

    My Iphone 4 switches off automatically with 60% battery balance and doesnt start, also when i connect it to my laptop it starts back and shows the battery balance and it stay on for another few hours even without recharging.
    what is the reason for this. do i need to take it to the apple store to get it checked
    pls inform as its a costly phone and i cant just take it to any roadside person.
    awaiting your reply

    These features are most likely result of faulty battery. Make Genius reservation and take to Apple Store for free quick battery diagnostic testing.

  • E52 Switches off automatically - starts after mult...

    Hi everyone,
    My nokia E52 switches off automatically and restarts only after I try multiple times. There is no strict pattern in either switching off or on. It can switch off in hours or in minutes. Similarly, I keep trying pressing the power button, but it switches on whenever it wants.
    I can't even understand what the problem is.
    My battery is fully charged. 
    Could anyone please suggest, if it is an issue with the battery or the phone and what might be the solution to this.
    Best Regards
    -Vipul

    Whilst it is working suggest that you backup essential data via Nokia Suite upon PC, then remove memory card (if any) and reset device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user). Lastly if no improvement see if option to re-install existing device software in Nokia Suite, as a pre-cursor to taking device to a Nokia Care facility.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

Maybe you are looking for

  • Error 2048 not a movie file

    QT 7 pro was working fine at first.Now when I try to play a video file I get "error 2048 not a movie file. The file plays fine in another player. Also QT will play a QT movie but not a file. I have QT installed on two computers with the exact same pr

  • The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list) What is this?

    After several hours of iMovie preparing my move I got the above msg. Any ideas? Thanks.

  • Windows 8.1 Software Center Issue

    In my development environment I have two clients, one is Windows 7 SP1 and the other is Windows 8.1. I have successfully deployed a required application to both clients. Now I am testing deploying an available application to both clients. The applica

  • Battery half-dead at 39 cycles. Apple refuses to exchange battery!!

    Hello people, I'm really in need for some advice.. I've got Core2Duo MBP, purchased at June 2007. My battery suddenly died on me at 39 cycles. I called Apple only to find out, that my MBP doesn't fall under certain battery-replacement program!! Obvio

  • Target node creation on condition

    Hi I have a requirement where i have to create a target node based on a requiremnt. the source is                                         The target is Line                                                     Tar   a1