My mouse hangs and freezes since downloading lates FF4 & Flash 10. Must hard reboot. Is there a fix?
WindowsXP home sp3. FF4.0.1(18). Flash10,2,159,1.
Started since updates. Very bad in Facebook. Cannot scroll hardly at all. Hopefully someone knows of a fix.
WindowsXP home sp3. FF4.0.1(18). Flash10,2,159,1.
Started since updates. Very bad in Facebook. Cannot scroll hardly at all. Hopefully someone knows of a fix.
Similar Messages
-
X100e Hanging and Freezing on Wireless
There was a different thread addressing freezing and hanging when connected via ethernet; however, I have had ethernet disabled from the BIOS since day one of receiving my system but I found my system to be locking up extremely often particularly when connected to the Wi-Fi at Purdue University.
For reference: The wireless network at Purdue University uses WPA-Enterprise with PEAP + Thawte Security Certificate.
Naturally, I had the latest BIOS (1.25) and had all the updates available from ThinkVantage System Update, but this did not seem to help any - when I was browsing on my university network it would simply hang and freeze up completely every 30 minutes or so, forcing me to restart the system. It would seem to freeze regardless of whether or not I was even doing anything on the internet.
There did not seem to be any serious issues on my home network, however, which used WPA2-Personal, but I do not really use my x100e at home enough to say for sure.
I was quite convinced that there was some sort of problem with either the wireless adapter drivers or some sort of power saving feature at this point, so I uninstalled the Lenovo x100e wireless drivers and obtained the newest drivers for the RTL8192SE chipset directly from RealTek and installed them.
I then went and disabled "Allow the computer to turn off this device to save power" for the wireless adapter from Device Manager. I also set the wireless adapter to "Maximum Performance" and turned off PCI Express Link state power management from the power manager. I also turned off idle timers for stopping hard disk rotation, system standy, and hibernation.
Now after this little set of actions I seem to be able to more or less surf and download things stably on my university network. I must note that, the system will still hang every now and then while I am browsing around. I don't notice any particular pattern to this hanging; it simply happens when I have a browser open and am surfing normally - it will hang for about 40 seconds or so (I can move my mouse but nothing will respond) and then it will simply resume normal operation.
So there is my story....
Has anyone else ever experienced hanging or freezing on wireless networks with their x100e?
Solved!
Go to Solution.Hello,
So far, my networking results with my ThinkPad X100e have been very good, but I have only used it on a few networks.
Have you tried using your ThinkPad X100e on different wireless networks to see if the results vary? Perhaps the problem occurs with wireless networks that are configured in a specific fashion or using specific hardware. Connecting at a local coffee shop or public library or other venue with wireless Internet access may provide a different experience.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Adobe Premiere Elements 10 on Mac OS 10.7.2 - Hanging and Freezing
Hello there,
While I'm not very knowlegable about video editing software, I do use Premiere Elements 10 to edit videos for YouTube. I recently have been able to record using a device which records in 1080i, 29.97fps and saves as an mp4 file format. I've been trying to edit these files (which can be up to an hour long) in Premiere Elements; however, as soon as a video file from this recorder is imported and dragged into the project, it hangs and freezes. Sometimes, the hang happens when "conforming" the video file; other times it happens when trying to preview the video.
My theory is that it is due to the file format, or because of the sheer size of the file. The files can be several GBs.
I have tried to reinstall the program, but this hasn't worked.
Is there any advice you could give me?
Thanks,
LiamWatson28.Hey Bill, thanks for the quick response.
It does use the H.264 CODEC. The project preset I'm using is NTSC-AVCHD-Full HD 1080i 30, although when I import the video to the project, I sometimes get a dialog box telling me that the project settings can be matched to the imported video, which I allow it to do. I have around 250GB of free space on my HDD. I allow the video and audio to conform and such on importing, I do not try to edit the video/audio while it is conforming. I'd also like to add that all files are transferred onto the HDD before the edit.
My specs:
MacBook Pro 13" (Late 2011) running Mac OS 10.7.4 (Lion) I apologise, I had this wrong in the title and the original post.
Intel Core i5 2.4GHz Dual-Core
8GB RAM
500GB SATA HDD
Intel HD3000 Integrated Graphics (if that's any help)
If there's anything else I need to provide, please let me know.
EDIT: I just tested editing a 10 minute video with the same file format and project preset, and, while it was hanging as frequently, it would only be for up to 5 seconds. Compared to the 50 minute video I was trying to edit, the hangs were much longer, sometimes becoming freezes. I know that if there aren't any immediate fixes and using the same video settings, I'll have to reduce the file size by reducing the length of the video, so cutting more frequently rather than recording long stretches.
Thanks,
LiamWatson28. -
DW CS3 Hangs and Freezes!!!
DW CS3 on a Mac Hangs and Freeze constantly! Are other
finding this problem? I do not know what to do about it.
Nancy>Here's a more intelligent response
Well here it is a year later and daylight savings has ended.
Everytime I try to open a dynamic page, Dreamweaver CS3 hangs.
So I find this thread, delete the winfilecache.dat file, and all is well.
>The question is, how do we disable this?
So DWQues, the answer is out there for those with open minds.
I doubt DWQues will ever come this way again, but I am sure others will.
Happy standard time!!! -
I purchased the movie "Black Nativity" at midnight and selected to download later; it shows that the movie has been charged in my account for billing, however; I when I go to download the movie, it ask for it to be purchased versus download. I would like to know if I will be charged again for the movie upon selecting purchase movie? I would like some direction as for how to download the movie that I already purchased.
Clicking on its purchase price again may result in you being charged again. Does the Store > Check For Available Downloads menu option download it
Or does it show under the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage for downloading -
Adobe Reader 11.0.03.37 hangs and freezes opening PDF documents
When opening PDF documents with Adobe Reader 11.0.03.37, it hangs and freezes for a few minutes. Is anyone else experiencing this and is there a fix or work around?
We have Windows 7 Professional 64-bit operating systems. It takes a moment for the Adobe Reader to unfreeze itself but will eventually.
Thanks!Found a fix for my problem. It wasn't the Protected Mode issue after all. The fix is to disable In Product Messaging.
Here is the fix for the problem. Now maybe Adobe can address this issue in the future release or patch/update.
Try it on yours and see if it doesn't fix it also.
The following below link provides the information I am about to share with you.
But open Adobe Acrobat Reader without opening a PDF file. So just open Adobe Reader application by itself.
1. Click on EDIT
2. Click on PREFERENCES
3. Click on GENERAL Category
4. UNCHECK "Show me messages when I launch Reader"
5. CHECK "Don't show messages while viewing a document"
This should fix your problem as it fixed mine. See the link below for more information. Looks like I will be doing a regedit script for our network users to get rid of this problem. UGGGHHH!!!!!!
Hope this helps!
http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/IPM.html?zoom_highlight= IPM -
HAVE BEEN UNABLE TO RETRIEVE MY OLD LIBRARY OF PHOTOS, ALBUMS AND PROJECTS SINCE DOWNLOADING AN APERTURE 3 SOFTWARE UPDATE TWO DAYS AGO. THE NEW LIBRARY ONLY HAS A FEW NEW PHOTOS IN ONE FOLDER
PLEASE ADVISE AS HOW TO RETRIEVE OLD APERTURE LIBRARY WITH ALL MY PHOTOS, ALBUMS AND PROJECTSFind the old Aperture library in the Finder and double click it to launch Aperture with that library set to the default.
And check your caps look key. It appears to be stuck. -
i put in the code to get the digital copy for star trek into darkness, and i clicked download later, but it didn't show up in my movie library like the other movies i did the same thing to, where is my digital copy of star trek?
Yes, the old album art view is gone, bu you can see the album art for a song that's playing by clicking on the art image and it will open a bigger view.
Everything else in your post is a waste. I'm not going to spend time reading it. If - and I repeat if, you have a question on how to get the best out of the new look iTunes, post it. But don't spend your time in long rambling negative rants. -
Iphone slow to type numbers and letters since downloading ios7
iphone slow to type numbers and letters since downloading ios7
RAB7228 wrote:
iphone slow to type numbers and letters since downloading ios7
There have been scattered reports of this problem. First try Ralph's solution, as the easiest. Next, try clearing memory by killing processes - double-press HOME, then flick each mini-page up. If it still not fixed Settings/General/Reset - Reset All Settings has been reported to be the solution by several people. Axeman's suggestion is also a good one, but is time consuming if you have a lot of content. -
Firefox hangs and freezes the moment i start it.
Firefox hangs and freezes the moment i start it (9 out of 10 times it freezes). I have reinstalled it but still it freezes. I removed the antivirus (avira) and firewall (comodo) but no change. Can't even enter safe mode it hangs.
os win7 x64, amd fx 8350m 8gb ram, firefox version 20Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
I recorded a video vertically on my iphone and when I downloaded it to imovie it distorted it. How can I fix this?
Just called in Apple Care for the same issue. All you need to do is go to the itunes file scroll down to the bottom where you will see the cammand Transfer purchases from " insert your name"iphone. It will automaticly download your purcases to itunes and place it under Purchases,it will also place the movies and shows in the apropriate folders in itunes. In addition there will also be an additional folder under Store in itunes that will list the purchases under the device it was puchased under for example Purchased on Pinkiesipone
-
I initially downloaded the application and was able to gain access to all of my photos through album, photostream, fb, etc. Now it will not pull any. After deleting the app and attempting to download it, it says I must pay for it (again) any help would be appreciated.
Sounds like a verification issue on whatever marketplace you bought PS Touch from. Did you try contacting Google or Apple to see what they say?
-
i upgraded to lion when it first came out but today i tried to open my photoshop cs2 and its telling me the powerpc applications are no longer supported is there any fix out there for this
Lion is Not compatible with PPC (Power PC) based software, such as your older version of PhotoShop. Your choices are you can either upgrade to the newer version of PhotoShop, or you can backup your data and apps, erase your harddrive and reinstall Snow Leopard.
Hope this helps -
I have just installed Mountain Lion and now Acrobat Pro 9.5.5 won't launch. Is there a fix?
I tried uninstalling the plug ins and installing Reader based on advice in another post but it didn't work.What's your system? windows?
[url deleted by host]
Message was edited by: Michael.lu [url deleted by host]
Message was edited by: Michael Kazlow -
What gives? I uncheck "Reopen windows when logging out" and it still goes back to the prev. sessions windows. Is there a fix for this?
I unchecked " Restore windows when quitting and re-opening apps." in the prefs. and still it goes back to the prev windows sessions when I uncheck "Reopen windows when logging out"
Maybe you are looking for
-
How to print emails from my Ipad on a HP6500. Can print attachments
I followed the instructions from the below post. I can print attachments fine but I can't print the text of emails. What do I do? Re: ePrint Support for Officejet 6500 E709n? Not easy to use!? Options 02-08-2012 06:46 AM I'm sorry I misunderstood th
-
Common Components reporting 'Failed' installing 11.1.2.1 on 2008 R2 64-bit
I am installing 11.1.2.1 on Windows Server 2008 R2 64-bit. My first installation pass is for my Web Application server; Foundation, APS Server and EAS Server. 'Common Components' is showing status 'Failed'. I extracted the following packages (and hav
-
I work with student-generated PDFs that require all content to be within a specific margin range. Occasionally tables and figures are indented or otherwise spaced incorrectly so that the content violates the margin requirements. In Acrobat X, I could
-
Dear Experts, I am trying to send customer invoice to an external system via PI with IDoc type INVOIC02. I have done the basic setting for the output type ZRD0 to transfer the document via. EDI. I have created a partner profile for Logical System u20
-
Adding large number of infoobjects to a transport request.
Hi experts, We have around 3000 infoobjects in our devlopment system. Now we need to add all of them to a transport request. Is there any simpler way to do this rather than doing it manually. Thanks in advance. Regards, shweta