My mouse was scrolling 'normally' and has stopped scrolling down.  Any suggestions?

My mouse was scrolling down 'normally' but has stopped scrolling down, forcing me to use the less convenient drag-down bar at the right hand side of the screen.  It continues to scroll up. 'Settings' doesn't seem to offer a 'restore' scroll down.  Any suggestions?

This
http://store.apple.com/us/product/MB112LL/B/apple-mouse?fnode=1c74cb6b5804af5dd2 c0d0c69b4368ad5cc935abc3ee6c01df3379247a…
shows that your mouse yo have a scroll button on the top surface
The link
http://km.support.apple.com/library/APPLE/APPLECARE_ALLGEOS/HT3226/HT326.mov
that 
den.thed
provided shows how to clean that scroll button
Here is YouTube video too:
https://www.youtube.com/watch?v=3Su6JDxYqAM

Similar Messages

  • My Bose SIE2i volume control does not work. (pause/play does work). This is the secone set - the apple store in Sydney replaced the firsat set that had the same problem. It was working OK and has stopped.

    My Bose SIE2i volume control does not work. (pause/play does work). This is the second set - the apple store in Sydney replaced the first set that had the same problem. It was working OK and has stopped.

    Thanks again V.K. I did check the layout, and it was listed as alphabet when I inputted the password. So that doesn't seems to the the issue.
    Just finished a truly mystifying experiment, but I put in a shorter password in the way mentioned earlier and it worked. I then systematically kept increasing the characters of that password and it seems that if the password starts to exceed about 16, it stops recognizing it. I am fairly sure it is not the password itself since it never gives an error when typing in the verification password. So unless I systematically make the exact mistake twice at the setup screen, and then don't or make a different mistake every time at the login screen, I don't think its my typing skill.
    So problem solved for now, but I am still a bit worried. Maybe I should completely reinstall and use a shorter password.
    Is there supposed to be a length limit?

  • Suddenly my itouch has stopped emitting sounds any suggestions on how to proceed?  Running 4.2.1

    Suddenly my itouch has stopped producing sound when I play either music or movies.  The volume bar does not show.   The alarm clock sound does work.  I am running 4.2.1.  Any suggestions? 

    Thanks for the suggestions. I have read and checked all...still no audio.  Other things I have checked are the following:  headphones do work......when mounted in docking station audio is produced....
    I also tried restoring itouch to original settings... no change.

  • Since the Maverick update, iPhoto 11 export of a slideshow has stopped working.  Any suggestions?

    Since the Maverick update, iPhoto 11 exporting of a slideshow no longer works. It did prior to the update.  The more flexible drop down menu when selecting Export has been replaced by 3 choices;  480p, 720, and 1080p.  Any suggestions?

    Here are some screenshots showing the export process in the slideshow.
    This shows the beginning screen to export the slideshow.
    Shows the screen for the file location to be stored.
    Shows the export has begun.
    Shows the export has started....
    Show the export still being saved.  About half way there....
    This image shows the slideshows being saved to the iTunes library before the Maverick update.  I had 3 decent size videos from the slideshows that played on Apple TV.  None of the exports after Maverick made it to iTunes.  They show up in the iPhoto slideshow folder as a file, but with nothing in them.
    Hope this helps explain what I have done and the comparitves.  Any suggestions?

  • Whenever i open a youtube video, firefox goes really slow and often stop working. Any suggestions?

    I have installed the plugin extension, but still whenever a youtube video is on firefox is like drop dead.
    Stop working and lag awfully.

    There are some compatibility issues between the latest Flash player and some Firefox add-ons or settings. Could you see whether anything in this article helps: [[Flash 11.3 doesn't load video in Firefox]].
    You might also consider disabling the new protected mode in Flash 11.3. See this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493 Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]

  • MacBook Air does not finish start up and has a white screen, any suggestions?

    It seems like the start up disk is full, but I can only restart or shut down

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Freeing Up Space on The Hard Drive
      1. See Lion's Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • TS4268 I still have "Waiting for Activation" while trying to activate iMessage on the iphone, noting that it was working normally and stopped working suddenly, as well I had done all the mentioned steps.. what should I do else?

    I still have "Waiting for Activation" while trying to activate iMessage on the iphone, noting that it was working normally and stopped working suddenly, as well I had done all the mentioned steps.. what should I do else?

    Define "mentioned steps." 
    See this:
    iOS: Troubleshooting FaceTime and iMessage activation

  • TS3048 can't scroll up and down with wireless mouse, I have checked setting and everything looks good.  Any suggestions on what else I can check?

    My wireless mouse has stopped scrolling up and down.  I have checked my settings and everything looks good.  Any suggestions on what else to check?  

    Hi:
    I wish my suggestion had gotten you further.
    I do suggest you try to connect the keyboard again.  The request for a number is a step in it trying to pair.  If it gets by the number, it sometimes takes a little while to get connected.  If you are unable to get it connected and want a new one, I have been using Apple Bluetooth keyboards for years - and I like them. The one I have (the newest model) only uses two batteries and is very thin. 
    Speaking of batteries, if you are not already doing so, you might consider rechargeables.  I have a drawer full of them and use a 15 minute charger.  I go tired of buying batteries and rechargeables are environmentally friendly to boot. At the moment, I use 2450 mAh Energizers and a 15 minute Energizer charger (all purchased new on eBay at a very reasonable price).
    I am far from an iPad "expert," although I have one.  If my suggestion below does not help, post your question in a separate thread in the iPad forum.
    I had a terrible time syncing my iCal on my Mac with my iPad iCal (confusing - hopefully it makes sense).  I quit using iCloud as that added to the confusion. There is a facility to one-time sync items.  When you connect your computer to your iPad, iTunes opens.  The system begins a process (automatic backup and so on). After it finishes, you can click on "info."  At the bottom of the screen, there is an advanced section.  You can select any of the items and then force it to sync. The iCal information from your computer would be deposited on the iPad. 
    After all that, I do not use a Google calendar so the information may be worthless to you.
    If you want to reset the iPad to factory settings, you can do that when it is connected to iTunes (one of the options).  Me being me, I try never to erase anything. 
    Barry
    Message was edited by: Barry Hemphill

  • Tapping the magic mouse to raise from sleep has stopped. Why?

    Tapping the magic mouse to raise from sleep has stopped. Why?

    There have been a few threads on here about this problem - there's a long thread here that started in 10.6 and has continued into 10.7: https://discussions.apple.com/thread/2223188?start=0&tstart=0
    When 10.7.2 was released it initially seemed to fix things for me but unfortunately it didn't last. The only surefire 'fix' for me is to set the computer to 'never sleep' in Energy Saver prefs. Hopefully another update might resolve it - we live in hope .

  • Is it possible to turn off the fluid grid function in dreamweaver during the process of building your site by mistake? It was working fine and simply stopped and I don't see how to correct what is wrong.

    Is it possible to turn off the fluid grid function in dreamweaver during the process of building your site by mistake? It was working fine and simply stopped and I don't see how to correct what is wrong.

    There is no specific function that turns FGL on or off.
    When you say that it has stopped, do you mean that the handles no longer show?
    If that is the case, then I think you may have modified the CSS to such an extent that Dreamweaver no longer recognises it as belonging to FGL.
    There are a couple of avenues for you
    Redo the site and make sure not to touch the FGL CSS
    paste the code here so that we can see what has gone wrong.

  • I was trying to update my phone to ios 7. There was an error and it stopped. Now my phone will not turn on.

    I was trying to update my phone to ios 7. There was an error and it stopped. Now my phone will not turn on.

    Try recovery mode as described here.  You may have to try to enter recovery mode more than once to succeed.
    http://support.apple.com/kb/ht1808

  • Cloud service created works fine in local Azure Emulator. But doesnot work when deployed to actual azure and says Restarting (Role has encountered an error and has stopped. Unhandled Exception: System.IO.FileNotFoundException)

    Hi,
    I have a created a cloud service and when i run locally in azure emulator it works fine. But when I am trying to deploy that to azure it says: Restarting (Role has encountered an error and has stopped.
    Unhandled Exception: System.IO.FileNotFoundException)
    Can anyone please help me on this.
    Thanks,
    Satya Chenna

    Any specific reason you are having timer on role start up? are you using thread.sleep for longer duration in the method?
    If you are using azure diagnostics - make sure these things
    1. Azure storage connection string is set to correct storage account and not to the development storage.
    2. Check session state provider - local is not supported on azure.
    Also you can refer this for more information 
    http://blogs.msdn.com/b/kwill/archive/2013/09/06/troubleshooting-scenario-3-role-stuck-in-busy.aspx
    Bhushan | Blog |
    LinkedIn | Twitter

  • When opening firefox it says that "Firefox has encountered an error and has stopped running"? Help!!!!!

    When I click on the Firefox icon The page comes up white and in the middle it says "Firefox has errored and has stopped running". Then it looks to windows for a solution but finds none.

    I am not a Windows 7 user, or particularly familiar with that error message but maybe it is worth looking at these articles
    # [[firefox crashes when you open it]]
    # [[How do I avoid crashes?]]
    # [[firefox hangs]]

  • I use Adobe Acrobat Pro XI (11.0.08) When performing "Save as" "Reduced file size pdf" Adobe processes for a while then completely stops, and has to close down. Just started doing that today.

    I use Adobe Acrobat Pro XI (11.0.08) When performing "Save as" "Reduced file size pdf" Adobe processes for a while then completely stops, and has to close down. Just started doing that today.

    I have Windows 8.1, and when I right click on the Windows flag (bottom left), the menu gives me a "Search" option. When I enter "%temp%", it goes to " "my username"/ appdata/temp" which is a list of file 1718 file folders. Many are empty but I did a small sample. Is that the right place to delete?    I tried Windows- Disk Clean, but that did not help.

  • My macbook pro is running 10.10.1 and has stopped syncing reminders and calendar events to iCloud.

    My macbook pro is running 10.10.1 and has stopped syncing reminders and calendar events to iCloud. Changes made to iCloud directly DO update to my machine, so the communication issue is one way only. When I make a change to the calendar or reminders on my machine, it will often bog down and run slowly. I have done several trouble shooting steps without result. these include:
    Restarting my computer.
    Running Disk Utility diagnostics for both permissions and disk verification.
    Checking that my internet and network is working.
    Checking that I am properly logged in to iCloud with my ID on my machine and that I have set everything to sync.
    Checking my iCloud settings to stop syncing Reminders and Calendars and then setting them back to sync again.
    Any suggestions?

    1. Calendars in the On My Mac or On My iPhone/iPad/iPod category, and calendars that sync with other network services such as Google, will not sync with iCloud.
    2. Back up all data, then take all the applicable steps in these support articles:
    iCloud: Troubleshooting iCloud Calendar
    iCloud: Advanced Calendar and iCal troubleshooting
    Nearly all sync issues should be resolved that way. Please make sure you've taken all the steps and tested adequately before continuing.
    3. If there are any calendars on your Mac that you don't synchronize with iCloud, export them by selecting them in the calendar list and then selecting
              File ▹ Export ▹ Export…
    from the menu bar. Quit Calendar.
    4. Triple-click anywhere in the line of text below on this page to select it:
    ~/Library/Calendars
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder selected. Move that folder to the Desktop.
    5. Launch Calendar. Your calendars will initially be gone, but they should resynchronize with iCloud. If they don't, uncheck the boxes marked Calendars and Reminders in the iCloud preference pane, then re-check them.
    6. Import the calendars you exported in Step 3, if any, by double-clicking the files.
    7. If the issue is resolved, close the Finder window you opened in Step 4. Delete the exported files and the Calendars folder on the Desktop.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Maybe you are looking for