My MP990 will scan using my Win 7 laptop but not with my XP desktop

I have been running my MP990 using a WiFi connection. I had to replace the printer with another MP990. I can still use the scanner function using the Win 7 laptop but not on the desktop XP. With XP, I get the following message:
Cannot comunicate with scanner for these reasons:
- Scanner is turned off
- Scanner is disconnected
(It is disconnected from LAN, if using on LAN)
Please check and try again
Scanner Driver will be closed
Code:5,145,55
Since it will scan using the Win 7 "Windows Fax and Scan" but will not work on the desktop XP, I suspect I need to re-install the software. I don't have the orifinal disk but I did download a couple of files: MP990soswin100us.exe or mpnx_3_0-win-3_05-ej-exe
Can I just run one of the above .exe files to take care of my problem?

Hi gooch,
I recommend installing both of the files you mentioned as one is the driver and the other is MP Navigator. The driver will get the basic files installed, but the MP Navigator gives you an easy to use interface to power the scanner.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats)?

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats
Happens isnce a week or four...

https://www.dropbox.com/s/h20hiaxiuynz6z5/Blendle%20week%2051%202014.pdf?dl=0
https://www.dropbox.com/s/eohk8an2rozwe5w/NatGeo2015.pdf?dl=0
Until a few weeks ago no problems with this kind of files

HT3951 How come when I download a movie it will play instantly on my laptop but not on apple tv...it takes hours to download

How come when I download a movie it will play instantly on my laptop but not on apple tv...it takes hours to download

The app as far as I can tell is not an Apple app. It has a gray "target" configuration with no indication of what is.

HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John Lee

Looking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

ITunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
http://support.apple.com/kb/PH1453

Adobe form-Able to post data using Adobe Reader 9 but not with Adobe Proff

Hello Guru's
I am facing one problem with adobe forms.
We have develoed a adobe form using adobe reader 9.
Now when user are posting the purchase requistion using the form,they are able to post the data using
Adobe Reader 9 but not with Adobe Reader professional.
Can anyone please advice me what can be the problem here.

Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.

Can login to OS 10.4.9 server using 10.4 client, but not with 10.3.9 client

When I try to login to OS 10.4.9 server using 10.4 client, all is fine, but not with 10.3.9 client -- what's up?
It seems that when I set the group preferences (what kind of dock the users in our elementary school see, etc.), it doesn't affect 10.4 clients, but when trying to log onto the server using a 10.3.9 client, it just runs and runs, never logging on. Have to eventually restart the client computer. If I take a user out of a group with preferences set, it's fine. So, help! Most of my computers in my lab are 10.3.9. All are bound.
Thanks,
Joan

Hi Devils_Coup,
first of all: WELCOME TO THE DISCUSSIONS!
It is strongly recommended to use OS 9.1 or higher. However, you do not have to buy it, just download and apply the free updates here: Mac OS 9: Available Updates.
Also make sure your firmware is up-to-date: Firmware Upgrades.
In MacOS X remember: Repair permissions before and after an update!
If this answered your question please consider granting some stars: Why reward points?

Using iWeb ftp trouble but not with Fetch

I have a site I created with iWeb and I cannot get it to publish to the ftp server (3essentials). I currently publish the site to a local folder, then upload the site folder using fetch. I would like to do it all through iWeb. But I keep getting an error? Any ideas on why it work for fetch and not iWeb?
thanks for any ideas.

Thanks for the tip. I tried it, and I had more success but not complete ...it now goes along farther without quitting,but says my password is incorrect. Which doesn't make sense because it is the same password that works for Fetch.
any ideas?
thanks,

Wi-fi at home: it works with my laptop, but not with my iphone

Hey guys. I just got an iphone and i cannot connect to my wi-fi network, but i can with my laptop (it's an hp). Does anyone know anything that i can do to connect? It is password protected, but i entered the password with iphone. Also, when I turn the iphone on after sleep mode, it picks up the network signal, but when i try to go onto the internet or itunes it does not work. Thanks a lot guys!

I had the exact same problem, your wireless router has a firewall set up not allowing you to access the wi-fi. You need to go to your firewall security setup and you will see your firewall encryption, that's the password your iPhone wants. If the letters are seperated by comma's, do not enter them. For example, I have 128bit encryption, which has 13 sets of letters/numbers seperated by commas, without commas I have a total of 26. Enter that as shown and you should be able to use your wifi at home.

Trying to sync ACT 2000 with a new Palm Centro. ACT 2000 synched with my Palm V using ACT Link 2 but not with Centro. Any suggestions?

null
Post relates to: Centro (AT&T)

I have no experience with the third-party application you are referring to but I have the feeling that it is designed to sync with devices using Legacy Conduits.
Legacy Conduits used on OS4 and before (and a very few of the early OS5 devices): Date Book, Address Book, To Do List, Memo Pad.
Extended Conduits used on modern devices: Calendar, Contacts, Tasks, Memos.
Post relates to: Palm TX

AOL Broadband, will connect to laptop, but not connect to internet explorer. WRT54GS v.6

I can connect to my wireless network via my laptop, but not to internet explorer. We have changed every setting imaginable and re-set the modem, router many times. We Ip configed, did ping tests, installed and re-installed the card in the laptop. Done all this 4 times with the tech support from Linksys. Finally, I realized it must the wireless router and/or modem configuration. (The laptop works on every other network in town except ours, and has not security settings enabled).
I have been on customer service calls for 2 weeks, with AOL and linksys and nothing seems to be helping me. I have 2 wireless routers (thought the first was bad, so bought another brand new), and just had a brand new modem installed. Basically, I have brand new equipment.
The laptop has no security settings and connect to any wireless network in town. It finds the connection to my WRT54GS v.6, but will not connect via internet explorer.
I want to uninstall and re-install the router. How do I uninstall the router? (I have instruction for re-installation). Also AOL rep told me, to make sure I configure the router to a certain port range. Any ideas as to how to do this?
Anyone have problems with AOL high speed and linksys router? Has the high speed cable cord coming out of the wall, not ethernet or DSL.
We have changed the settings in http://192.168.1.1 till I am blue in the face. None of the channels worked, security didn't work, adding the ip address manually to the laptop didn't work. I am getting no error messages. Am trying to get this wireless modem working because I need it. Should have come to this forum first!

hi..if you want to uninstall the router...the only thing you need to do is hold the reset button down for 30 seconds...
i m a bit confused here as to why the ISP techs asked you to forward ports on the router...port forwarding is needed for a specific application or a device that is behind the router....
the mentioned ports are for AOL messenger ( AIM )....and has nothing to do with the modem...anyways , let us work out together on this issue...carry out the steps i mention and you can revert back with the results and your success rate...
1) connect the computer to the modem and check what ip address you have on the computer ??
2) go to start -> control panel -> network connections ->
let me know what other icons you have besides Local Area Connection and Wireless Network Connection..
3)connect the computer to the router and the router to the modem...
access the router using http://192.168.1.1 .. let the internet connection type be on DHCP....check the ip address on the status page of the router ui...
4) if it is 0.0.0.0 , go to setup tab and go to mac address clone subtab , enable it and hit clone..save the settings and do a power cycle...
5) check whether you have the ip address...if you have the same ip as coming off of the modem..u should be online and if still 0.0.0.0 , then select PPPoE for the internet connection type and enter the username and password...check whether the ip address comes up....if still negative, ensure that the modem is in bridge mode...
6)if the ip address comes up as 192.168.1.x , change the local ip add of the router to 192.168.2.1 and do a power cycle..
let me know for any help !!!

From last 3 days i am trying to my best to use facebook in my i phone 4s but still i am failture to contect,i can able to use my facebook account on my pc or laptop but not in i phone,i remove facebook so manytimes and also reset all setting but sti

from last 3 days i am trying to my best to use facebook in my i phone 4s but still i am failture to contect,i can able to use my facebook account on my pc or laptop but not in i phone,i remove facebook so manytimes and also reset all setting but still i am fail ,pls do needful

I am very happy to report that my server connection tech, which I called via landline, informed me to : 1. Open Tools 2. Scan down to Clear Recent History 3. Delete All. That was it! Unbelievable! Six hours of searching through the Windows catagories. I checked the results on an internet site, and viola! It was gone! Mozilla Firefox seems to remember the usernames and passwords irregardless of the option window that asks if you if want it to remember the user and password. I finally got in touch with my friend and he said he did not answer yes to the window, even though he was aware of it. No damage. I surely do appreciate everyones' concern in this, now what seems to be, a very simple solution. Cudos to Firefox! Thank-you! P.S. I now have to enter my information at the beginning of any password protected sites...no harm done! My friend is now condemned to the 'user account' site! lol...

Unable to update apps since I have closed my Verizon e-mail account. The old ID address pops up and I can not do updates. I can not use the old password since the account is closed. I have a new ID and password on my laptop but not for my I phone.

My Verizon e-mail account is closed and I can not access the needed updates for my I phone apps. Even if I knew the password I would have to access the old e-mail account which I can not do. I have an ID and password for my new laptop but not for my I phone which is under a Verizon service contract....ugh!!! Thanks

kenfromsouth jordan wrote:
My Verizon e-mail account is closed and I can not access the needed updates for my I phone apps. Even if I knew the password I would have to access the old e-mail account which I can not do.
You don't need to access the email account.
Use the link provided by robdrage to update your old AppleID.

HT1476 My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones. I'm stumped :/

My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/

Update: It seems as though the phone will charge if I plug it in and then turn it off. It will not charge while the phone is on. Also iTunes will not recognize it, so I can't sync or anything. I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?

I cannot access itunes on my pc it works on my laptop but not on my desktop. It used to work and no longer does it just keeeps trying all the time but doesn't connect. I have tried apple suggestions but still not accessing store. Help?

I have been using this desktop for itunes for years. Never any problems. Recently I cannot access the store it keeps trying but does not load. I can access form my laptop but not from the desktop. I get automatic updates form microsoft so the system is up to date. It is very frustrating and means that I haven't and ups to date library on my desktop and I play my music on this whn I'm upstairs. Can anyone help me with this one?
Thanks
Kate

Hello LainyM,
Thanks for using Apple Support Communities.
Please follow the directions in the article below to download iTunes on your PC.
iTunes: Downloading iTunes for Windows using Internet Explorer
http://support.apple.com/kb/TS3212
Take care,
Alex H.

My MP990 will scan using my Win 7 laptop but not with my XP desktop

Similar Messages

Maybe you are looking for