My msgs in inbox shows the different received time

whenever i get a msg and i open it .it shows the different received time.it is far behind the original time been set in the mobile. is there any settings that i could change it.the mobile model is nokia 2700 classic and i bought it just two days before. it is happening for all the msg by different people.is there any solution for this? is there any settings i could change to get the right timing?. i highly depend on the received timing since i could not get when exactly the people sent msg to me.help me with this?

The time stamp in received msg is actually the time on which that msg was sent. so it won't be current time on phone. For example, a person sends you a text on 5:00PM and you u receive that on 6:00PM, now the time on ur phone is 6:00PM but the time in received text would be 5:00PM.
Hope this helps.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Similar Messages

[svn:osmf:] 10124: Add a few variations of HelloWorld, showing the different ways of adding the DisplayObject to the Sprite.

Revision: 10124
Author:   [email protected]
Date:     2009-09-10 10:40:10 -0700 (Thu, 10 Sep 2009)
Log Message:
Add a few variations of HelloWorld, showing the different ways of adding the DisplayObject to the Sprite.
Modified Paths:
    osmf/trunk/apps/samples/framework/HelloWorld/.actionScriptProperties
Added Paths:
    osmf/trunk/apps/samples/framework/HelloWorld/HelloWorld4.as
    osmf/trunk/apps/samples/framework/HelloWorld/HelloWorld5.as
    osmf/trunk/apps/samples/framework/HelloWorld/HelloWorld6.as

The connections which you have done are right, Here are some settings which you can set on your computer and check if this solves your problem or not.
Win XP: Click on the Start button >>> go to RUN>> type in "ncpa.cpl"- hit OK >>Here(Network Connections) right click on the ""Local Area Connection"" icon and select properties-Here click on the "Configure"   jaspal button- Click on the "Advanced" tab- In the "Property" box highlight Link speed and duplex/Connection type/Network or Media type- And in the "Value" box select 10 Mbps half duplex/ 10 base T/10 base half mode and click on OK.
If still you face the same problem, then i feel it might be the problem with the Switch itself.

Why the FCP 7 is show the different clip view which is not there?

I am using FCP7 for about 5 years now but never faced this type problem before. I am using footage from 3 different cameras as usual. When I view the clip or export the files it shows the different clips which are not there. Could anyone help me to solve the issue please. I already trashed the FCP preferences.
Thanks in advance.

This sometime occurs when you are using source that is not friendly to FCP-7, such as material that is in the H.264 or other mpg format.
Is your source material all converted to an edit friendly format?
MtD

Show the different key figures

Hi,
Can we define a query, and show the different key figures, base on the different value of the characteristic?
Let's say, in the query, it contains a characteristic called "store", and if the store = A1,i want to only show key figure K1, K2, and a formular =K3/K2;
and if store = A2,then i want to show key figure K1,K2,and a formular = K4/K2; otherwise(for other store <>A1, or A2), i want to only show K1, K2 and a formular =K1/K2.
Is it a way fo rme to do that, pls advice.
Thank you,
Ping

Hi Anil,
I read through the link you given, but still not sure exactly what i should do to get my report done ¡V I am sorry¼
What I need is: for store S034 and S035, they has a ¡§store
Open date¡¨ last year which are as below:
S034          09/4/2004
S035          09/18/2004
And for other stores, their ¡§store open date¡¨ are all in 2003.
So in the query, I have two key figures: MTD (sales value month to date this year), and MTDL (sales value month to date last year). If I run the query today, which is 21 of Sep 2005, then the date range for MTD will be from 09.01.2005 ¡V 09.21.2005; and the MTDL will be base on the range from 09.01.2004 ¡V 21.09.2004; and I have another formula key figure ¡§percentage¡¨, which compare ¡§this year¡¦s sale month to date ¡§ with ¡§last year sale month to date¡¨, eg: ¡§percentage¡¨ = MTD/MTDL
But since for store S034 and S035, the store only open on 09.04.2004 and 09.18.2004 respectively (that means there is no sale value existing before their store open date last year). So for store S034 and S035, we will only use the MTD partially to calculate the ¡§percentage¡¨. Eg: the date range used for calculation for this year¡¦s Partial sales will be from 09.04.2005 ¡V 21.09.2005 for S034 (K3); and 09.18.2005 - 21.09.2005 for S035 (K4). I have already created key figures for K1, K2, K3, K4, based on the different date range above.
So the report will look like below (of course, K3, k4 will be hidden once the calculation of ¡§Percentage¡¨ is done)
Store     K1(MTD)    K2(MTDL)   Percentage    K3(Partial MTD for S034)   K4(Partial MTD for S035)
S031     10            20                10/20
S032     15            21                15/21
S034     30            35                28/35                   28
S035     40            39                36/39                                                                        36
So my main concern is how is formula ¡§Percentage¡¨ can be done based on the different value of store. Eg, if store is S034, it will take K3/K2; and if it s S035, it will take K4/K2; otherwise, it will take K1/K2.
I looking forward for your advice please,
Ping

Hi, can you help? My emails that I have received show the date received as either today, yesterday or July 28. How can I get the correct date received?

Hi, The emails that I have received show the date received as either today, yesterday or July 28. How can I get the correct date received?

That's very scary. They might do it, but I personally have never had Apple contact me re id's except on their site when signing in. I suggest you DO NOT respond until you have a phone conversation with Apple security. They can verify if they sent you the e-mail and why.
While it's very possible it's true,again, I suggest you not respond until you speak to someone at Apple. I've often read here that when people sign in they are not allowed to because "someone else has used the id" type of statement.
Also, you should be able to go to the app store and see what apps you have downloaded.
Though it could have been a free app, have you checked to see if any were bought with your id account?
I've gotten these types of e-mails from places like USPS and FedEx which look amazingly authentic and were from their website. I also received an odd e-mail from my cousin in Ireland last year that clearly was not from him. It was also sent to others in his family in Ireland. I e-mailed him that I only opened it because it had a .ie, but suggested he change... Days later I received mail from 'him' - same name, but at yahoo.com.
Again, I would call Apple. You can also report it at [email protected], but I would not settle for that given your situation. If nothing else, call Apple sales (sales depts. anywhere answer fast) and ask them to transfer you to security. Apple will not want anybody accessing their name, and while it's unlikely, it's not impossible that it is someone phishing.
Hope this helps and can you let the support community know your results by posting on this thread when you're done? Thank you.
Hope this helps.

HT1725 When I download a song from iTunes into my library, it often says it has downloaded, charges me for it, and on the song in my library shows the full playing time. However, when I play the song, at around halfway through it skips to the next song?

When I download a song from iTunes into my library, it often says it has downloaded, charges me for it, and on the song in my library shows the full playing time. However, when I play the song, at around halfway through it skips to the next song?
i'm just wondering:
a) why it does this
and b) how to stop it doing this, because it still charges me for the song :/

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

Day View in calendar Component showing the next at times not everytime!

Day View in calendar Component showing the next at times not everytime! My question is when we go to Day view which day does it show? is it Server day where the application reside or the machine time zone day ?

I think you want to know, days & time picked by which machine, locally or from server? It does take from server where the application is running.

My inbox shows the single, most recent message only. Missing all other messages.

Hello,
I'm using IMAP. In webmail, my inbox shows many messages. In Thunderbird, my inbox shows only the latest message. My subscribed folders sync just fine.
All insight appreciated!

''Matt [[#answer-671531|said]]''
<blockquote>
http://kb.mozillazine.org/Disappearing_mail
</blockquote>
Thanks for your suggestion. I went through the entire document meticulously and couldn't fix this. I've decided to use a different email client. Appreciate the support. Thanks again.

Will Cisco Unity inbox show the calling name from non-subscribers

Unity CX 7.1.3 -- I need to know if the calling name is present will CUCM pass this to Unity CX and show the name in the messages "from" field on the Cisco Unity Inbox (personal communications assistant) I currently have a PIMG integration and there is no name field in the SMDI traces.
thanks

Hi -
Sorry, I misunderstood your original posting. Here is a link to Unity Connection for customizing the subject line of voice messages - http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsagpdf.pdf
The subject line is viewable using the Cisco Unity Inbox. Note however, this is not ciscopca, which is used to configure user voicemail settings. As you can see from the link, "When the %NAME% parameter is used in the subject line format of an outside caller message, it is automatically replaced with the ANI Caller Name of the sender of the message. If the ANI Caller Name is not available, Cisco Unity Connection inserts the value specified in the %NAME% (When Unknown) field." If the message comes from a non-subscriber, you may see "Voice Message from Unknown Caller" or Unidentified Caller in the subject. I recommend also using field %CALLERID%, which I believe is used by default, because at least the voicemail user will get the caller's phone number.
Ginger

I want to get the mail received time..

Hi,
For my application, i want to get the email received date and time. I tried to use getReceivedDate, since i am using POP3 protocol, it is not working. Then i tried to use getSentDate, it is giving me the date which is not matching with actual sent date. For any date, it is giving me one standard date, 03/09/09 3.25..
Could any one tell me, why sentDate is giving me wrong date? Thanks.

bshannon,
thanks. I am able to realizee now that sentDate is retrieved from Date header. Actually i am reading first email from inbox folder using Message[] message..
message[0]. In that mail server, inbox has only one email, so i expected that to give that sent date.
But the problem is, it is reading some other email.. it is giving the sent date of that email.
I am not able find out from where it is reading. message[0] has to give me the details of the first email right? Do you have any idea on this

How can I show the date and time on the pictures in iMovie

I am trying to make a slide show. The date and time the pictures were taken are the important information that I would like to show in the slide show. However, I cannot find the way to do that in iMovie.

I am trying to make a slide show. The date and time the pictures were taken are the important information that I would like to show in the slide show. However, I cannot find the way to do that in iMovie.

I can read my temperature and batch number but I can't produce a graph show the Temperature over time

I am very new to Lookout and I have been having alot of problems getting the graph to show up. We have several kettles that cook media to a desired temp over a pre-set time and I am able to see the batch number and the temp of the kettle but I can't bring up the graph that shows the recipe being cooked. We use Ethernet for three of our larger kettles and RJ-422 for ten of our smaller kettles. My network constantly crashes and if there is anyone reading this in the Ottawa area I would like to set up a meeting to get some advice.
THKS. Jason

Hi!
As i understand, to create Graph in lookout is easy and you know the process . There are Two resons to Graph hang the PC or process.
1.Low computer memory
a. RAM b. Graphic Card memory.(VGA Card)
2. Deviation Rate.
If you set the deviation rate minimum than it will continuously logs the data and will slowdown you computer. If your process allows you to store data with more deviation than it will make your life easir.
Also increase the Computer RAM and increase the Graphic card memory, because graphs require memory as in the case of games.
Hope this will solve your problem.
Atif
Bahrain

I have 4 accounts in Apple Mail, 1 at iCloud and 3 at Gmail. On just one of those addresses a given message is received numerous times. Example: my inbox shows the 1st 2 messages coming from my own email address and the title is identical, Mind over .....

I'd love to offer a screen capture and save a few 1000 words. You'll see that I have numerous duplicate copies of emails being received by one account, my RegisterMe4Now address. Let's see if the captures don't speak for themselves.
I would appreciate your help and guidance. Thank you.
<Image Edited by Host>

Troubleshooting Apple Mail
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
Airmail is selling pretty well in the App Store.
Mail Alternatives – 9 Free Email Programs
Mail Alternatives Review
Mail Alternatives Review (2)

Is there a mobo manual that shows the different cables and connections for the IQ772.UK?

Does anybody have a Service Manual to show disassembly and reassembly including mobo replacement? The screen has died and I have been told to replace mobo. The output to an external monitor works but trying to do a factory reset, it freezes on 17%.
Any further info in stripping and replacing including cable cobbections would be appreciated.
Regards
Graham

Attached find a picture which may help you.
JT
I work for HP but my posts and replies are my own.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Attachments:
IQ772.pdf ‏109 KB

How to show the region multiple times on the same page

Hi,
I have a PL/SQL Dynamic Content region which creates a report with custom layout using pl/sql web toolkit. The stored procedure takes the parameter and creates report. Can I display the same region multiple times by calling it from loop with different parameter each time ?
Thank you,
Asha

Hello Asha,
In your plsql you can do a loop, so you would only have one plsql region but in there that can generate different areas of your website.
e.g. it can loop and generate different divs or tables.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/

My msgs in inbox shows the different received time

Similar Messages

Maybe you are looking for