My MSI 955X built in networking is not working properly

Hi,
I have many MSI 955X motherboards with the built in Intel Pro1000 and the broadcom 1 GB lan built on board. I have been having trouble
getting these built in lan ports to work. I have updated the mobos bios to the latest. I have installed the latest lan drivers and still they act up.
The network ports seem to take a very long time to copy files from our server etc. a 5 MB file just sits there and says calculating time to copy file then starts copying very slowly. When I don't use the built in lan ports and instead use a pci 10/100 network card I copy fine.
But as soon as I use the built in network ports I get irrattic speed and behavior. It's almost like it can't auto select the speed properly and gets a lot of errors. But when I tell the ports to connect at 100 full instead of autoselect. It doesn't fix the problem. Has anyone else had this problem before. I have noticed it with not just this mobo but with others as well. It appears that the 1 GB technology isn't very compatible with the existing network. It's really very odd as in I've had other 1 GB network cards to work for a long time. Then sometime in the future they don't connect properly. Without changing any of the switches etc.. They just start working irratically. When I replace them with a 10/100 card they work like a champ.
I never had much luck with intel network cards I think they are too complicated and have too many options.
Any help at this point would be much appreciated.

1. Please check whether the cable you are using is right, especially the max speed which the cable supports;
2. Please check like this way: click start/run, then type cmd, after you enter DOS circumstances please type ipconfig/all. Then you may see whether the mac adress is right or not;
3. Please enter you network card property to select the connection type to have a try.

Similar Messages

  • Ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference

    ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference

    Hi, JoJoEvs.
    Thank you for visiting Apple Support Communities. 
    Here is an article that you may find helpful when experiencing this issue.  After all steps related to your sound issue have been processed, see the section labeled Issue not resolved. 
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Jason H

  • I have just upgraded to Lion and I now find that my VPN network does not work properly.  It worked fine with Leopard.

    I have just upgraded to Lion and now my VPN connection does not work properly.  It was working fine when I was using Leopard.  The VPN is My Private Network and we use it to link to BBC iPlayer when abroad.  It will actually connect to the VPN site and shows a UK IP address, but then when we try to load an iPlayer programme we get the message from the BBC that we are not in the country and, therefore, cannot access the site.  Any suggestions?

    Have a look at System Preferences, Accessibility, VoiceOver.
    (Command - F5).
    charlie

  • My built in keyboard is not working properly on my iPhone4S

    My keyboard is not working.  When I type it presses multiple letters and periods and spacing.  It is like the sensitivity of the keyboard has increased 100% but for no reason.  Please help.

    iPhone: Troubleshooting touchscreen response

  • Mac Network does not work properly, can't safe, access only in safemode

    Hi guys
    I just got a nice IMac 27" and really like it.
    Now I set up a network to move files back and forth with my Macbook Pro.
    Now I encounter the following problems:
    - I can not safe files on the IMac from my Macbook
    - Access to files on IMac are only in "safe mode", meaning I have to safe first with another name on my Macbook and can not modify them straight up.
    I have set the access rights to read and write with a special setup username and password. So that can not be the issue.
    Have tried to google this problem but no luck unfortunately.
    Hope you guys can help asap.

    Very often a small mistake in configuration can be responsible for WLAN functionality.
    For me your posting is not so clear and because of that I will ask you some questions:
    1. Is your notebook preinstalled with delivered recovery image or you have installed your own OS and which one?
    2. Is WLAN card listed and properly recognized in device manager?
    3. Is the WLAN enabled with WLAN switch placed at the right side of the notebook?
    4. Can you use FN+F8 key combination to enable/disable WLAN card?
    5. Are you sure the WLAN card is enabled properly?
    6. Do you use Windows WLAN settings for WLAN configuration?
    7. Have you tried to scan the surrounding area using Windows or ConfigFree utility?

  • Facebook Social network app not working properly

    i just recently bought a new n8 and when i got it all set up i went on social network app and the images didnt load up properly.  i called up nokia but no help there so i sent them emails and also no help there to.
    this is what im talking about:
    http://i75.photobucket.com/albums/i320/r31boi/63499_10150355207730114_854745113_16197389_7443512_n-1...
    i did a reset, updated and format. i doubt its internet connection because i tired it on wifi and used optus 3g connection and it was still the same.
    please help

    Glad it's all sorted but probably would have achieved same result if used OVI Suite > Tools > Software updates on your PC.
    Happy to have helped forum with a Support Ratio = 42.5

  • DirectAccess on Server 2012 R2 with Single NIC behind NAT on IPv4 only Corporate Network Results in "DNS Not Working Properly"

    I hit this problem at a customer site and can re-produce it in a simple lab.  Lab environment: servers:
    1x Server 2012 R2 DC and DNS server - DC1 - 10.0.0.1
    1x Server 2012 R2 DirectAccess (DA) server - DA1 - 10.0.0.100
    Servers are running "Update" (KB2919355) and following DA hotfixes:
    KB2929930
    KB2966087
    I configured DA (via advanced wizard) as follows:
    DA and remote access
    AD group
    directaccess-webprobehost DNA (A) record pointing to 10.0.0.100
    behind an edge device (with a single network adapter)
    SSL certificate from enterprise root CA issued to directaccess.contoso.com
    NLS on remote server using https://nls.corp.contoso.com
    DNS: corp.contoso.com = 10.0.0.1; nls.corp.contoso.com = ""
    DNS suffix search list = corp.contoso.com
    The DNS server validates successfully in the configuration UI.
    With this configuration, I get a static IPv6 address of fd79:7a37:cbd9:3333::1/128 assigned to the NIC
    The operations status is all green apart from DNS which displays the following error:
    "DNS: Not Working Properly"
    Error:
    None of the enterprise DNS servers fd79:7a37:cbd9:7777::a00:1 used by DirectAccess clients for name resolution are responding. This might affect DirectAccess client connectivity to corporate resources.
    Causes:
    Enterprise DNS servers fd79:7a37:cbd9:7777::a00:1 are not responding.
    I can, however ping fd79:7a37:cbd9:7777::a00:1 (which is the DNS64 translation of 10.0.0.1)
    I would like to know what checks are failing as there are no failures in Event Viewer.
    I have come across forums where people have the same issue and fix it by specifying the local IP (in this case 10.0.0.100) as the DNS server, however Richard Hicks has confirmed with me that the DNS server should be set to the DNS server, not the DA server's
    IP.

    Thanks for the post Matt,
    ISATAP has been disabled on my DA server, so the results of a "ROUTE PRINT -6" command yields:
    ===========================================================================
    Interface List
     12...00 15 5d 01 03 64 ......Microsoft Hyper-V Network Adapter
      1...........................Software Loopback Interface 1
     14...00 00 00 00 00 00 00 e0 IPHTTPSInterface
    ===========================================================================
    IPv6 Route Table
    ===========================================================================
    Active Routes:
     If Metric Network Destination                           Gateway
      1    306 ::1/128                                               On-link
     12    261 fd79:7a37:cbd9::/48                         On-link
     14    306 fd79:7a37:cbd9:1000::/64                On-link
     14    306 fd79:7a37:cbd9:1000::/128              On-link
     14    306 fd79:7a37:cbd9:1000::1/128            On-link
     14    306 fd79:7a37:cbd9:1000::2/128            On-link
     14    306 fd79:7a37:cbd9:1000:814c:28be:46b5:52c1/128     On-link
     12    261 fd79:7a37:cbd9:3333::1/128            On-link
     12    261 fd79:7a37:cbd9:7777::/96                On-link
     12    261 fe80::/64                                           On-link
     14    306 fe80::/64                                           On-link
     12    261 fe80::20c0:e848:d304:9f01/128       On-link
     14    306 fe80::814c:28be:46b5:52c1/128      On-link
      1    306 ff00::/8                                               On-link
     12    261 ff00::/8                                              On-link
     14    306 ff00::/8                                             On-link
    ===========================================================================
    Persistent Routes:
     If Metric Network Destination                            Gateway
      0 4294967295 fd79:7a37:cbd9:1000::/64       On-link
      0 4294967295 fd79:7a37:cbd9::/48                On-link
      0 4294967295 fd79:7a37:cbd9:7777::/96       On-link
    ===========================================================================

  • My built in camera is not working after upgrading to a new Skype version

    my built in camera is not working after upgrading to a new Skype version

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX: 
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    If that doesnt pass,
    Suggest looking here, much success has been found:
    http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

  • My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1and it was not jillbreak or hacked to unlock. I need help, what can I do?

    My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1
    my phone was not jillbreak or hacked to unlock. i need help, what can I do?

    Did you do the Reset Network Settings as I described above?
    There is no way to go back. You can try reseating your nanoSIM or replacing it. Or call your cell provider and have them check the provisioning on your phone.
    Or Restore your iPhone from your backup in iTunes.

  • My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1 i need help, what can I do?

    My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !!
    It was working fine on ios 8.1.1 i need help, what can I do?

    I have this problem too - and it is on a BRAND new iPhone 6 - I have definitively tracked the issue to the moment I upgraded to iOS 8.1.2 - and am beyond frustrated. No fix to tell you about, sorry…but you can read my post here if you are into the whole "misery loves company" thing: iOS 8.1.2 Cellular data problem (Definitive - maybe)

  • My Iphone 4 network is not working in Malaysia

    My Iphone 4 network is not working in Malaysia as I offered for 2 month period by behalf of my company and when buy a sim card in Malaysia then I only realise there were no network and I bring to a shop and they upgraded my Iphone and it stuck on the activation part which require a network. Any Solution ?

    iphone 4 and 4S have two microphones...bottom n top...sometimes top microphone is covered by the case or sheet as in my case..and when i just put off the case it was working fine.....i just got problem today and today it is solved again.....may be its ur case or may be ur case is a genuine hardware software problem...just for info

  • Wrt610n wireless network does not work after firmeware upgrade

    Hi
    I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan.  Any suggestions? maybe the firmware tosted the router?
    Regards
    Stefan

    Update -
    After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
    I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
    Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

  • After Hard Reset My Social Network is not working....

    Due to Some problem I did Hard Reset to my C7 but now My Social network is not working.
    I had reinstall the nokia software but still its not working properly.
    In the Social network all the graphics are coming like picture with a cross.

    Something is wrong because a hard reset will never leave the TC with green LED.
    What version TC.. what firmware??
    What OS on the computer?

  • Help! Built in features/hints not working flash cs6. Need fix ASAP

    Loads of built in features are not working for me in Flash CS6. When I was using CS4 they did, now they aren't. I will give two examples. Say for example I am writing code in the actions window and I type "green_btn." in regards to the name of a button instance, what usually happens when I hit the "." immediately after "green_btn" a menu will pop up showing me every option I can pick, like green_btn.addEventListener() etc etc. There is usually a menu that comes up, but for me there is no menu. I have also created a button symbol, placed an instance of it on the stage, named the instance and tried it again (cs6 is supposed to recognize the "_btn" automatically and make the menu come up even if there is no button created, but I decided to create one just in case), and no menu pops up, still . Something is wrong here, it used to work for me when I had CS4 installed. Another example is if I am in the actions window again, and I type in a function like trace(); for example, you are supposed to be able to put your cursor infront of it, or highlight it and hit F1 and it will take you directly to the help page for that function. This does not happen as well. As I go on and on I seem to keep stumbling across all these built in features for convenience that are not working. And I know 100% that they are supposed to be, I am actually in a class right now for flash and I watch demo videos where it works perfectly. What is going on with mine? I have checked every possible preference and option, I have everything and I mean EVERYTHING up to date with the most current versions. I'm stuck, and I am getting really pissed off to be blunt, I need to fix this ASAP because it is going to affect my studies which are currently ongoing, I have deadlines to  meet and I am dicking around trying to fix this. PLEASE PLEASE HELP ME! Any suggestions and solution will be greatly appreciated on my behalf. If anyone helps me fix this I'll kiss you!!!!!!!!

    I increased the cache from 800 to 5000, is that sufficient?
    The .fla is saved to my harddrive
    still no code hinting. I also unchecked and rechecked the code hinting, and even did a reboot on my comp and still nothing.
    everything is updated, EVERYTHING, to the most current version available. I updated everything possible through the "Adobe Help Manager" and also through the help menu within the programs themselves; Help->Updates. I made slight progress with the help issue, in general settings withing the "Adobe Help Manager" I changed it to display local help only. So now when I initiate help by either right clicking, and then going to "view help" in the pop-up menu, or by hitting "FN+F1" (hp laptop) it brings up the flash_reference.pdf but it does not go directly to the function selected as it's supposed to. So maybe that isn't even progress...
    I watched the demo video for the course I am in, and it shows our instructor put the cursor immediately infront of trace(); (within the actions window) and go to help and it goes directly to the help section on trace, and then he also highlights trace(); and goes to view help and it does the same thing.
    I am also in touch with him (its an online course) to see if he can figure out it, and I am still waiting to hear back from him, but no one seems to know. I even contacted ADOBE today and got passed on to 3 different people only to be given the toll free 800 number because no one knows how to fix it.

  • Satellite M645-S4050: built in camera does not work correctly

    My built in camera does not work correctly.
    It does not have any kind of effect on and it captures pictures and videos as if some kind of thermal camera was on.
    Also some videos I load up on youtube look like this.
    I have been researching for an answer but can't find it, please help me.

    All you can do is to test it with latest webcam driver.
    Remove preinstalled camera software and install latest version offered on Toshiba download page.
    If the same happen again visit nearest Toshiba service and show them how it looks like. Maybe the cam must be exchanged.
    In the past I have used several Toshiba laptops with built in cam but I have never saw something lke this.

Maybe you are looking for