My mushi hdmi cable is not connecting to my TV

Hi all,
im using my macbook pro to view movies through my samsung lcd in the maIn room at home, using a hdmi connection through the 'moshi' adapter. But for the last two nights all ive got on my TV screen is a black screen with 'no signal'. The macbook pro screen flashes blue but the TV screen doesnt seem to be picking it up.... any ideas what the issue could be ? I have used two seperate hdmi cables but to no avail...
thanks

OK, is this just happening on your home wifi or everywhere? If just at home, you may need to do a hard reset of your router and then load the latest firmware (if needed). It's also possible that simply going into your router options and changing the channel (from 11 to 6, or 1, for example) may help. Start there.
What OS are you running? Thanks

Similar Messages

G60-230US Laptop - HDMI cable does not provide sound output only video

HDMI cable does not provide sound output only video. I have the following device adapter - Mobile Intel(R) 4 Series Express Chip Set Family, and two sound, video, game controllers - Coexant High Definition Smartadudio 221 and Intel (R) HIgh Definition Audio HDMI. I do not see any option but "Speakers" on the Sound "playback" tab. Not sure what to do to fix

With the cable connected to source, click to select/highlight the Intel HDMI. next click the 'Set default' button.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

PS3 error: "An Ethernet cable is not connected" with E2000

Problem: My PS3 displays An Ethernet cable is not connected almost immediately after logging in. I am connected through a Linksys E2000 router. If I reset the cable modem, it will work for 10-15 minutes until it errors out again. If I plug the PS3 directly into the cable modem, it works fine. I'm really confused.
1. I do not believe it is the router, as my computer is also connected to the router, and works fine. My Touchpad is connected wirelessly and also works fine.
2. I do not believe it is the PS3, because it works fine if I plug it directly into the cable modem. I tried switching to wireless and it finds a lot of other signals (including mine), but I have the same problem if I choose wireless.
I first had this problem with a launch PS3 and a Netgear router after almost three years of no problems. This was back in November 2010. I replaced it with a Linksys E2000 router in January 2011, and a slim PS3 in late September 2011.
I had no problems from January until last weekend. I have tried to do the DMZ trick, but no luck. I have also tried to set the primary and secondary DNS to 4.2.2.1.
Does anyone have any insight? If I need to buy a new router, I will, but I don't understand because it works for my computer and Touchpad. Is it something crazy like when November comes, my internet settings get corrupted?

Try using the DHCP reservation feature to give your PS3 a "static " ip outside of the DHCP server range. So something above the range called "IP Address Range". 192.168.1.150 should be good, but you can check to confirm that this address isn't in that range.
Make sure your PS3 is set to obtain the network information automatically, NOT through a custom setting. Also, make sure your PS3 is turned off completely before doing this.
Could you also give us a screenshot of the "signals" tab when you go to 192.168.100.1?
I don't work for Cisco. I'm just here to help.

TS3623 Why does my tv buzz halfway through a film is it my cheap hdmi cable or not?

Why does my tv buzz halfway through a film is it my cheap hdmi cable or not?

I bought ATV last night and have the same issue. Mine screen is up for no more than 60 seconds at a time so it really is useless. I'm going to try different things today to see if I can figure it out, but no answers yet.

PLEASE HELP! ETHERNET CABLE IS NOT CONNECTING PROPERLY WITH FIOS ROUTER

I recently purchased a time capsule to use in conjunction with my mac. When I am prompted to connect the ethernet cable from the lan port on my fios router to the wan port on the tc, the cable will not connect properly to the lan port on the tc. If I connect it from the lan on the fios router to the lan on the tc the green indicator lights up to indicate a connection but this does not help the wan port situation. I am able to locate the network I created from my mac but this tc network is not connected to the internet as indicated by the amber blinking light on the front of the tc. Also since creating this non working tc network, my fios signal is almost non existant! I am new to all of this so any help at all would be greatly appreciated!!!

Don't worry about the cable. For now.
Set the TC to bridge mode.. In bridge there is no wan port.. so you can use any port on the TC.
Test with the TC plugged in FIOS.. use in turn all the ports to see if it will work.
Do not change any setting but bridge the TC from default.. ie do not set extend wireless.. that will totally foul it up. Do not use join wireless, that will triple foul it up. Absolute default.. set TC to bridge... plug into the FIOS.. ethernet to any port that the light goes on.
Do a snapshot of the TC setup from airport utility and post.

Hdmi cable will not work on ipad1

Have ipad1 with apple hdmi connector & 25' hdmi cable iOS on ipad1 is 5.1.1 will not connect
Anyone else have this issue?

There is no HDMI support on iPad 1
You need to use one these
http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
OR
http://www.amazon.com/EZOPower-Component-Micro-USB-iPhone-Classic/dp/B008FHK75S/ ref=sr_1_10?ie=UTF8&qid=1373689248&sr=8-10&keywords=Apple+iPad+component+AV+cabl e
http://www.amazon.com/RF-AP301-30-Pin-Component-AV-USB/dp/B005G5ONMA/ref=sr_1_5? ie=UTF8&qid=1373689248&sr=8-5&keywords=Apple+iPad+component+AV+cable
Good Luck!

HDMI cables do not work on my AppleTV

i tried connecting my apple tv to my Marantz projector via HDMI cable, and its not finding it. it just says "signal not found." my component cables work just fine on it, but no-go on HDMI. and i know the HDMI cable works fine because i've used it on my PS3 and Xbox 360. i've read a few threads that talk about 1.3 or 2.0 HDMI cables, or using an HDMI switch, but before i spend money on either (which could possibly be expensive) i would rather know how to fix it. can anyone help me?

like i said, everything seems fine because my blu-ray and HD DVD players both work fine, and they use regular HDMI cables

MBP to an a/v receiver via dvi to hdmi cable, display not detected?

So as the title says, I'm trying to connect my MBP to a Sony str-dg510 a/v receiver in this order:
MBP >
Mini Displayport to dvi connector (http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=MTA4ODk2OTE ) >
dvi to hdmi cable (http://www.amazon.com/DVI-HDMI-Cable-6ft-Male-Male/dp/B0002CZHN6 ) >
Sony STR-dg510 AV Receiver >
Analog TV.
And here's the issue: I'm not getting a second display detected at all. It is an analog connection from the AV receiver to the TV, and I've connected other laptops to the receiver just fine, albeit on a different input.
So I'm not sure where to go from here, the mini displayport to dvi works fine onto an apple display at work.
I also got an unlock message on the receiver at first and thought this may be the issue, so I got an optical audio cable similar to this: (http://www.ramelectronics.net/audio-video/audio-cables/digital-audio-optical-tos link-cable/poft3ps/prodPOFT3PS.html )
And now the sound plays fine, but still no picture (and the unlock message is gone.)
Any idea's?
Thanks

Welcome to the Apple Community Q62.
If it works fine on another TV but not directly with this TV, the problem is with your TV or your cables. Have you eliminated the cables.

Hello. My 1st Generation Apple TV with HDMI cable does not turn on. Its a used model purchased on eBay. I've checked and ensured that the electrical plug works. Is there anyway to manually check to see if the unit turns on or do I have a defective uni

Hope I'm using this forum right. I purchased a 1st Generation Apple TV on eBay. Unfortunately, I cannot get it to turn on. I have another Apple TV (1st Generation) that works flawlessly on another TV. So I tried to use the new unit on this TV with same electrical cord and HDMI cable. No luck. It would not turn on. So I do not know if I have a defective unit or if there's another method of turning on the Apple TV. Again:
1. I double checked and it was on the correct HDMI setting (the other Apple TV worked on it) and used the same cable
2. I double checked that the electrical was correct - again, the other Apple TV worked correct.
Any suggestions on fixing this would be most appreciated.
Thank you

Welcome to the Apple Community.
A good indication would be the status light to begin with, it should flash rapidly on start up and then settle down (assuming the status light is working-they have a habit of fading)
The other thing you could try is cycling the resolutions in case the previous user has left it on a setting that your TV doesn't support.
Press and hold both the 'menu' and '+' on the Apple Remote for about 6 seconds.
Press '+'or '-' on the Apple Remote to cycle through the display resolutions.
Pause a couple of seconds after each press for the Apple TV to accept your selection.
When Apple TV reaches an acceptable display resolution and “If you can see the Apple logo, select OK” appears on your TV screen, press 'select' .
If that doesn't help, I fear the Apple TV is defective.

I need help ! I have a MacBook Pro and I want to buy an HDMI cable but not sure which one...

I want to buy a cord that will hook up from my Laptop (Macbook Pro) to my TV. I've already checked and my TV does have a HDMI port.
Im just not sure where I can buy a HDMI cable or which one. Suggestions?

SimplyCassandra wrote:
I want to buy a cord that will hook up from my Laptop (Macbook Pro) to my TV. I've already checked and my TV does have a HDMI port.
Im just not sure where I can buy a HDMI cable or which one. Suggestions?
I always suggest going to monoprice.com for cheap priced and good quality cables, adapters, aother videio/audio realated hardware.years.
Example:
Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support
You can search for the cable of desired length there as well.
Been using monoprice for years. Excellent source for this kind of stuff.

On my HP Envy ultrabook 4, hdmi port will not connect to my av receiver.

when I plug the hdmi port on my Envy Ultrabook 4 to my av receiver I get nothing (just a blue screen).
The system and settings worked fine with my older pc, but when I unplug it and plug into my ultrabook, I get nothing

Good Morning @marcop86
Welcome to the HP Forums!
It is a grand place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that when you connected your ac receiver to the HDMI port on your Ultrabook 4 that you just get a blue display..
It does work when connected to your old computer.
What Operating System is on your old computer?
Is your ac receiver supported in Windows 8.1?
Have you done all your Windows updates?
Have you ran the HP Support Assistant to aid with HP updates?
Have you checked the manufacturer's site for an updated driver?
Here is a link to Connecting a Monitor, Projector or TV (Windows 8)?
Have you tried a different HDMI cable?
If you would like further assistance, please provide the model of your ac receiver and the exact model of Ultrabook 4 you have.
How Do I Find My Model Number or Product Number?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

After update iOS 5.0.1 VGA adaptor and HDMI cable are not support on my iPad 2...

Please help me.....

las opciones de video ya no se encuentran en el menu del ipad por lo cual no permite la conexion a un tv lcd, ya que aparece que no se encuentran dispositivos HDMI conectados.
video options are no longer on the menu of the iphone so it does not allow connection to an lcd tv, since it appears that they are not connected HDMI devices.
PLEASE HELP ME!!!!!!!!!

No sound over HDMI, picture works fine but in sound manager tells me HDMI not connected

Hi There
I have a tm2 1050ez and am experiencing problems with my HDMI port.
When I connect it the display automatically gets duplicated and everything works fine, but when I try to play a movie with vlc for example I do not get any sound through the TV, only on the tablet.
Of course I went into the sound manager because I suspected that you must tell the tm2 where to play the sound, but to my surpise it said that the HDMI cable was not connected?
I therefore could not make any changes to the default output device...
Even in the IDT application wants to tell me that the HDMI cable is not connected. I have plugged and unplugged it several times to no avail.
I hope someone can help me on the above, I already searched the net for several hours but havn't seen a similar problem, with the most problems it does show the cable as conneted..
Thanks in advance!
Geen
This question was solved.
View Solution.

I have same issue as reported by another board member.
I've HP DV4t 1300 laptop with Vista 64bit with service pack 2. I upgraded all drivers and everything is upto date.
On awaking from sleep/hibernation AUDIO is screwed up on LCD connected via HDMI. No matter what I do if I make my computer sleep/hibernate and then connect LCD I'm unable to get audio working.
Help from technician will be appreciated. Technician can reporduce issue as I mentioned.
Thanks,

Having problems connecting iPad 4S to monitor with Apple adapter and HDMI cable.

Purchased an Apple adapter to connect to an HDMI cable. The connections were secure and the image on the iPad was duplicated on the monitor; however, there was a lot of "snow" on the monitor. I tried turning off the power to the iPad and then starting back up, but that didn't work. Once when checking the connections the image cleared for a few seconds, but then the "snow" came back. Any ideas?

sounds like either an issue with the HDMi cable, or the connection at the TV possibly.
Try another HDMI port on your TV if there is one, or a different cable.

Ethernet Cable "Not Connected" for W510

I recently reloaded my OS, and now my wired network card does not work. The driver manager say the card is working fine. But whenever I connect the network cable, there are no LED's light up on the card, and ipconfig says the cable is not connected.
I know it is not the cable or router, since I pulled the cable from a working T520.
Thoughts? Did I do something wrong on the OS install, or is it hardware?
Thanks
Al

Ok. It was worth a shot.
How about trying a Linux Live CD boot? Even though Windows is reporting the card as ok, if it doesn't work in Linux, then the report is suspect and you may, in fact, have a hardware issue.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

My mushi hdmi cable is not connecting to my TV

Similar Messages

Maybe you are looking for