My Music Player hangs after the latest firmware up...

I have a 5800 Xpress music phone. I updated the firmware yesterday to the latest version (V40.0.005). And also added some songs from OVI suite. Now my music player hangs all the time. I dont know what to do. And need to restart the phone again to get rid of the problem. Sometimes even if i restart it wont work. Then i need to remove the battery and then restart. So please help. I am frustrated.
Solved!
Go to Solution.

After I updated my 5800 to v 40 - i did a soft reset (wiping the phonememory) and a format of the memorycard to make sure the device was cleared for glitches. Atm my 5800 is working like a charm. Actually quite a bit better than my n97.

Similar Messages

Lost all my apps after the latest firmware upgrade...

Hi All,
I am not a regular viewer for this forum, I believe now I should have...
Because, As one of the friends out here mentioned, All my apps are lost after I upgraded to
Nokia N79 11.049 RM-348 from Nokia care centre :-((
Can Nokia do anything abt this? I have seen across the net, that many users have complain abt the same pblm..
Before the software update, I couldnt configure the email, but after I did, now I lost, all the apps installed in my phone..
I hope I should have done the backup.. Among that apps, I believe oxford was useful for me...
But any one please help me to restore those apps

http://nokia-n79-software.mobisystems.com/platform.html?c=1&sc=13
http://www.softwaremarket.nokia.com/?action=productDetails&pID=3504&pmsid=305〈=fi
http://www.symbian-freeware.com/tag-oxford.html
here are some links, now i don't know if this is what you are looking for or if they are free. and yes you have to reinstall yours apps unless you did a back up which you did not. reinstall nokia maps, share online and such you can find it either here
http://betalabs.nokia.com/betas
or on regular nokia site for you region/country to see what else you might be missing. sorry i know this is not what you want to do but this is the only way you can restore apps on your phone.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

N73 stopped synchronizing after the latest firmwar...

does nebody have a solution

Is it a problem with connections?
Last time I upgraded (a LONG time ago - I'm on Voda) I found I had to uninstall / reinstall PC Suite to update the phone drivers on my laptop.

Zen XTRA is completely dead after installing the latest firmware 2.10

Hello,?I have tried to install the latest firmware 2.0.03 to my Zen Xtra 60GB mp3 player. The installation process completed about 70%. As I understand, at that point the?new firmware was finally uploaded after a couple of player reboots. The?firmware installer was waiting with a message "Waiting for the player to reboot", and the player rebooted. But the firmware installer was waiting, and waiting... and after an hour I looked at the player and saw that it was not starting up at all. I removed the USB cable, stopped the firmware upgrade process and tried to reboot the player with reset; then I tried to access the recovery menu as described in the FAQ?- but no success. The player shows completely no response to any button presses, the LCD does not even flicker, the hard dri've does not power up - I don't hear it. Nothing happens, even if pressing the play/reset switch for fi've minutes. What's could be the matter? And more importantly, how can I get it working back again? I fear that the warranty has expired by now. Can anyone suggest what to do?I would be grateful for any ideas.

It is puzzling how some people including myself can upgrade thier firmware on thier devices and experience no problems at all during the procedure. Then theres others like yourself who would experience catastrophic events.
Since we all downloaded the firmware from the same place, and?alot of us didn't have any problems, it is?at least safe to say that there isn't anything?wrong?with the new firmware. Or else we'd all problems.
So for these devices that are failing, there must have been already a serious problem with them before the upgrade even started. The symptons just went unnoticed through every day normal use. And are only manifested through a reload/upgrade of firmware. Or something happened on the computer itself, during the transfer of data; auto file scanning virus protection comes to mind, or other programs or services running in the background that were taking up resources needed to make the upgrade go smoothly,?a USB cable with a short in it or a bad USB port. Who knows?!
If the player doesn't even start?up in?rescue mode then theres really nothing as a consumer you can do to fix it. You'd have to just see about getting it repaired, or replace it. I know yours is a 60GB, but?I gotta tell you the new 30GB Zen Vision M is a sweet deal!

IPod Touch (4th gen) will not sync music after the latest iTunes update

I'm using iTunes on a PC with Windows 7 and after the latest update (iTunes 11.2.2), it will not sync with my iPod touch 4 (also updated to the latest possible version - iOS 6.1.6).
Before the update there was no problem with the sync. And this iPod has always been synced only with this computer, and this iTunes library.
After the iTunes update, several songs on my iPod were greyed out and unplayable (the library plays fine in iTunes).
Now, when I try to sync, iTunes goes through all the steps, saying it finished syncing, without any error message but there is no actual change on the iPod.
I've tried deleting all the music on the iPod, to resync the entire music library anew.
Again, iTunes went through all the steps, finished "syncing" and nothing - and, of course, all the music on my iPod is now missing.
When I check the "On this iPod" option in iTunes, the entire song list shows up there but appears greyed out and unplayable.
On the actual iPod device, there is absolutely nothing in the Music app - no songs, no playlists.
The iPod always shows "no data" in the Music app.
Sometimes iTunes shows that I have 18GB of music on the device, sometimes it shows 0GB ...at one point it showed "no space available". But it has plenty of space - 23.5 GB of available space out of 32GB.
To fix this I've tried the following:
- automatic sync, manual sync, manually adding/deleting songs on the iPod, autofilling and replacing songs;
- resetting my iPod by holding the (on/off and home buttons) and resetting through the "reset all settings" option on my iPod;
- reset and restore from backup;
- uninstalled and re-installed iTunes on my PC.
- I've run the diagnostics tool in iTunes - all tests passed;
...plus various other suggested solutions I have found in the similar topics around here.
(I've checked and there are no restrictions to the songs, the computer is authorized, etc.)
Absolutely nothing works and it is very frustrating, as I usually only use the iPod for the music.
Please help.
Violet

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

After the latest version of Adobe flash player was installed, movies and tv shows will not play, and

After the latest version of Adobe Flash Player was installed, movies and tv shows will not run, and most of the news videos will not play. I've tried uninstalling and reinstalling it but that does not help.

I have windows (crap) seven and internet explorer. When I try to access movies or tv shows, I'm always asked to install the latest version of Adobe Flash Player. When I check the programs list, it indicates that Adobe Flash Player Active X is installed. I have uninstalled adobe and reinstalled it several times. Do you suppose this is a virus, and I need to redo the hard drive completely?

TS1372 After the latest iTunes update iTunes no longer sees either of my ipods. Diagnostics says no ipod connected. However my laptop, which is running Window 8.1 does see the ipod.

After the latest iTunes update neither of my iPods are recognized by iTunes, so I am unable to sync. When I run diagnostics it says no device connected. My laptop sees my iPod so I know it is connected. I have tried all of the recommended iTunes fixes and none work. I tried deleting and reinstalling both an older version and the newest version. The older version would not reconize my music libray. Any thouhts?

I tried deleting and reinstalling both an older version and the newest version.
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

TS3789 I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until

I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until proven for example ios6 on iPhone with that stupid map app instead of google maps.
I just want to buy and hear my iTunes music and videos on my apple tv, could before cant now. Thank you apple. Time to pack up the apple tv and start torrenting without the ios-bs.
Disheartened apple fan.

Welcome to the  discussion forums.
Try going to synching in the sources menu on your tv and selecting 'change itunes library', when it gives you the passcode check itunes to see if the tv is showing up as a new device, if so try entering the pass code. It may be that your tv is seeing itunes as a different library because of a recent upgrade.

HT4356 After the latest update cannot print to my hp photos art 5510 help please

Updated to latest iOS 6.1.2 now just cannot print to hp photosmart 5510 this was working fine until now have tried switching ipad off ,also tried turning off printer tried switching router off just sits with item in printing queue even though it finds the printer,help please

You may have a print job stuck in the AirPrint cue of the iOS device, or the printer's firmware may be out of date. Do a firmware update first. You will find the directions linked below. If that doesn't work, clearing the cue should correct the problem. Double-tap the button on the front of your iOS device. This will bring up a menu along the bottom of the screen that displays all running apps. One of the apps should be Print Center, and it should have a number next to it. That is the number of print jobs you have in the cue. Touch the Print Center icon and a window will come up displaying the print cue. You will only be able to cancel one print job at a time, so make sure to cancel the last job you sent first, or every print job that was sent after the first one may print. Once the cue is clear, try using AirPrint again. Let me know what happens.
Getting the Latest Firmware and Product Updates
I am a printer tech for HP.

After the latest Security Update 2012-001 (Mac OS X 10.6.8) my Adobe Photoshop CS 8, Dreamweaver 8, and InDesign CS programs crash when I try to save a file.

After the latest Security Update 2012-001 (Mac OS X 10.6.8) my Adobe Photoshop CS 8, Dreamweaver 8, and InDesign CS programs crash when I try to save a file. HELP!!!

Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
=======================

I need the the latest firmware for Airport Extreme Model A1034 (M8799LL/A)

Hello everybody:
I want to flash my Airport Extreme Model A1034(M8799LL/A)with the latest firmware available..
My Airport have a internal modem , 1 Wan , 1 Ethernet & 1 USB ports
I checked some firmware updates, but I am not sure what is the correct update ..
I don't want to ruin my Airport for flashing the Airport with the wrong update ..
I only have Windows Xp computers ,, I need a Mac to do it ?
Please somebody help me to find the update ,,
Thanks in advance ,,

Do you know if this is still the case? (Version 5.7 is still the latest available for the 802.11g version of the AirPort Extreme Base Station).
I'm a little confused after the release of AirPort Base Station Update 2007-002 for Windows:
http://www.apple.com/support/downloads/airportbasestationupdate2007002forwindows .html
It clearly states that "AirPort Utility v5.2.1 software supports the AirPort Extreme Base Station with 802.11n, AirPort Extreme Base Station and AirPort Express Base Station." But then if you read the System Requirements it says that you need:
* Windows XP with Service Pack 2
* Windows Vista
* AirPort Utility 5.0 or later
* AirPort Extreme Base Station with *802.11n*
So what is the latest version for the 802.11g version of the AirPort Extreme Base Station?
Thanks

Exclamation point appearing beside songs after the latest itunes update.

Good Afternoon,
After the latest Itunes update songs in my the majority of my songs in library now have an ! beside them.
The songs in question appear to be ones that I have brought over from my older devices (downloaded from CDs), I know how to transfer music from my I-pod to I-Tunes and I have had to do this is in the past when I got a new PC however I don't want to go through the process of re-transferring these songs from my ipod back to my itunes again.
However If I have to go through this process again is there a way to cement these songs into my I tunes library and will not disappear again after the next update?
Thanks

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

How do i install the latest firmware for my muvo tx

gud day fellow forumist.....im new here and i would like to ask for assistance on how to
upgrade the firmware of my mp3 player muvo tx tm. i've already downloaded the latest firmware
and saved in on my computer i just want to know the procedures on how to upload it to my player.
thnx in advance!

As per the FAQ, make sure you click on the "show details" link next to the link for downloading the actual firmware file. This gives all the instructions on what to do.

Do The New Nokia N97's Have The Latest Firmware Ru...

Do the new nokia n97's have the latest firmware running on them (V20) or do i have to upgrade it after it arrives?
Solved!
Go to Solution.

That depends how long it has been since the phone left the factory? It is possible that some retailers have a stock that is very big, so that the phones that they sell right now have a firmware that is a few months old...
Where are you planning buying the phone?
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Each time i try syncing my ipod with itunes, it freezes itunes and i end up having to shut down my computer. This happened after the latest download, any suggestions?

each time i try syncing my ipod with itunes, it freezes itunes and i end up having to shut down my computer. This started happening after the latest download and my latest purchase. The latest purchase doesn't show up on my iPod and itunes freezes at synching step 2 on 2. Any suggestions?

You should Reset your iPod, by
1. Press Menu and Center button simultaneously for about 10 Secs till the Apple Logo comes ON.
2. Disconnect the sync cable.
3. Check the iPod Welcome screen, select language, go to menu (if you are lucky, your music are still on the iPod.)
if your iPod doesn't show the Welcome screen, bring it to Apple Store.
If the above is okay, (can see Menu but no Music)
4. Close iTunes and Reboot your PC.
5. Start iTunes
6. Connect the iPod to the Sync cable.
7. if iTunes ask to Restore, please do so.
8. Sync your iPod. ( I would advise you to disconnect from Internet and stop the Antivirus program when doing this.)
Good Luck.

My Music Player hangs after the latest firmware up...

Similar Messages

Maybe you are looking for