My Muvo Square FM 5GB has a pr

I bought a MuVo2 FM 5GB a month back.
This morning, I found out that it has a thin line running through the LCD display.
The thin line empties out the original display, making that part "invisible".
What should I do? What can be done to recover the display?

The blank line is gone now.
But the player just subjected to some rough shock and now it doesn't seem to boot.
I tired running Rescue Mode, but it just doesn't seem to absorb enough power!
When I try switching it on, upon releasing my hold on the play/power button, it shuts itself down.
On several trys, it reboots itself again and shut of for 2 times.
What should I do?
Should I go down to the service support centre, if so, how long would it take on the average to get it fixed?

Similar Messages

When I export documents as a PDF in Indesign the fonts appear as squares. This has started happening since I updated my operating system to 10.9.4 on my iMac.

When I export documents as a PDF in Indesign the fonts appear as squares. This has started happening since I updated my operating system to 10.9.4 on my iMac.

Apple Mail uses Apple's own PDF viewer, and it's ... well, let's be friendly and say not really up to par. Don't use it for anything else than ascertaining there is *something* in your mail. Then use the free Adobe Reader to view your PDF.
See this recent thread: http://forums.adobe.com/message/4526583

Muvo Micro N 200 has a problem with FM recei

Hi All,
I bought recently Muvo Micro N 200 MP3 player ( 52 MB) and it sounds very good on MP3 songs. I tried for FM and end up with problem.
I bought this in Japan and Set the FM region to Japan and started Autoscan. It has given lot of stations and none of them are clear. All stations are received with Hissing sound and lot of noise along with relay. First I tought, there might be some problem with FM stations and checked with my another FM player. It worked well.
I do not know, what exactly is the problem. All FM stations are received with Noise. Please help me to correct this problem. Please let me know, if there are any settings to be done other than FM region setting to Japan, that I have already done.
Note : When I rotate my MUVO player in some angle, the FM receiving turns good and I found that, it receives well only in certain angles. Is it so.
Thanks,
Saravanan

If you are in Japan, the FM setting should be on autoscan
If you are anywhere else in the world, it should be international, the FM settings are not for where you bought it, it's your present location here and now.
The noise you hearing is most likely white noise, and yes the MuVo is very sensiti've to where it's placed on receiving signals

Muvo^2 1.5GB MP pla

Hi, I was recently listening to my MuVo^2 .5GB MP3 player when it froze up! I pressed the on/off button to switch it off, but nothing happened. So, i pulled out the battery, and when i replaced it, it said Recovery Mode v.00.
When i browse through the options, eg 'Run PC ScanDisk' etc, and try to access these, it says 'Media Error' for each one.
And when i connected it to my PC, it wasnt even recognised.
Anyone know what i can do? Any help you can provide would be much appreciated!
Thanks

Unfortunately Media Error most likely means there's a problem with the hard disk. You'll need to contact Creative Support.

Help! MuVo^2 FM 5GB is fro

Well the MuVo^2 FM was working perfectly fine till I charged it. When i came back it was stuck/frozen at 'MuVo^2 FM'. Ive tried to go into rescue mode and do all the stuff. it does not respond to usb when i plug it in the comp and when i try to use the options in recue mode it jus freezes. The only one that works is reboot and that doesnt do anything. Please what can I do?

The connection on the FM Wired remote is identical to that of the included wired remote, obtained with the Muvo2 FM 5gb.
Are they ever going release firmware enabling the FM wired remote to operate fully on the 5Gb Muvo2? Or am i better off just taking it back and flaming the sales person?
ruddiger

MuVo 2 1.5GB question

I am interested in buying a MuVo2 .5GB player and I need to know if it works as a USB hardri've *WITHOUT* any kind of Creative driver.
I will be using mainly it as an external dri've on various foreign computers, so this is crucial for me. Unfortunately my good old Zen Xtra cannot serve this purpose. (What is the need of having to install drivers for a USB dri've?)
I would also like to know about the anti-shock durability of the player's microdri've (no flash, right?). Is it OK for everyday *long* and relati'vely *fast* paced walks? (Nowhere near jogging though ) What is its resistance compared to my old player? Is it true that smaller dri'ves are less sensiti've?
Thank you,

tr4wanfs wrote:I am interested in buying a MuVo2 .5GB player and I need to know if it works as a USB hardri've *WITHOUT* any kind of Creative driver.
It works as USB mass storage. No driver required for Win Me/2000/XP.
I will be using mainly it as an external dri've on various foreign computers, so this is crucial for me. Unfortunately my good old Zen Xtra cannot serve this purpose. (What is the need of having to install drivers for a USB dri've?)
The Zen isn't a USB dri've, it has a bespoke hard disk format and needs to enter tag data into the player's onboard library.
I would also like to know about the anti-shock durability of the player's microdri've (no flash, right?). Is it OK for everyday *long* and relati'vely *fast* paced walks? (Nowhere near jogging though ) What is its resistance compared to my old player? Is it true that smaller dri'ves are less sensiti've?
Creative say only jogging and similar sports are an issue, hence walking is presumably OK.

Muvo^2 FM (5gb) scandisk prob

I saw an earlier post that had the same problem as me, but there was no follow up answer.
Anyway, my problem is that when I start my Muvo up, it says that smartscan failed, and that I should press the menu button to go into recovery mode.
I then select PC scandisk, and it tells me to attach the USB cord.
Afterwards, the computer detects the Muvo, but nothing more happens. The screen on the Muvo is simply the icon that indicates that it is connected, but scandisk is not run at all.
I'm sure I am just skipping something really simple.
Thanks in advance to anyone who can help me.

eneleon,
You need to run Scandisk from Windows manually. Open Windows Explorer and right click at the removable disk dri've letter of the player. Select Properties -> Tools tab -> Error checking column. Select the option 'Automatically fix file system errors' and start the process. Be sure to disconnect the player properly using the Safely remove hardware icon at the taskbar.
Jason

Muvo^2 FM 5gb [tells me i havnt safely removed so i have to scan disk everyti

firstly.. i plug my muvo ^2 in .. and then safely remove it.. and every so often now.. it says i havnt safely removedit so i have to scandisk it now. so i go and scandiskit .. and then next time it loads finje
then the next tinem i plug it in .. and take it out safely it says i need to scandisk agen..
ne help ?

Hmmm. I would copy everything off of it, re-format, and copy everything back on. It sounds like the disk's directory structure is damaged.

Converting square wave to double

I am trying to pass to square wave signal into math script. I am assumeing that i have to convert the signal into a double. Is this possible? If so how could I convert this signal so it can be passed into math script?
Thanks,
Leif

Which data type does your square wave signal has? If it is a waveform you can get the value as an array of double with the Get Waveform Components primitve.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Muvo TX SE 1GB - Strange Noi

I bought a Muvo TX SE GB yesterday and everything seems to be fine, except some kind of strange beeping and whirring noise (that a cd player sometimes makes). I have read other threads with this problem, but no one has actually told how they got rid of it (that is, IF they got rid of it). I have tried the firmware for the muvo TX: NOMAD MuVo TX Audible Firmware Upgrade .0.05
Is this the correct one for the muvo tx se? If so, it doesn't seem to work. I chose the option to format my mp3-player, and when I turned it on, it was still making the noise, even when it wasn't playing a song.
Please help, I couldn't find the answer elsewhere, and if it is there, I must have skipped it (if so, please redirect me) or it was written vaguely.
So I would appreciate any response, thank you.

If it makes you happy - I think I have the exact same problem with my recently bought MuVo 52 TX. When I turn the player on I hear sort of buzzing/whirring static noise in my headphones. It changes a bit when I press volume buttons, albo it as if "reacts" when I am skipping folders using menu - every time I skip a folder there is a "buzz" (apart from that there is a regular buzz in the background).
My friend who has muvo 52 TX FM has no such problem. I am sure this is not a problem with headphones because I connected them to iPod mini and they played fine.
I wrote creative support about this and they suggested me to do a firmware upgrade.
After I did it the player "died" - I read many people have the same problem:
http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=95672#M95672
I will have to return the player to the store I bought it in.
Regards,
Simplex

Custom high and low times for square waves

Hi, is there a way to create a square wave that has an incremental HIGH pulse width and a fixed LOW pulse width?
Sorry I'm quite new with labview, any help is appreciated, thanks!
Solved!
Go to Solution.

Hi GBPC,
My name is Jack and I work at National Instruments UK.
I understand you are trying to output a square wave signal with a fixed low time and variable high time in labVIEW.
The reply above works great if you want to use the signal internally. Alternatively if you are trying to output the signal with a piece of internal or external Data Acquisition (DAQ) hardware you will want to use LabVIEWs DAQmx Tool palette.
I have created a quick example below for you to look at that should help you come to a solution. It uses the DAQmx VIs to create and initialize a channel and then runs it in a loop with controls to change the high and low times using a property node.
Hope this helps
Jack. W
Applications Engineer
National Instruments
Attachments:
Variable High Time Pulse Generator.png ‏37 KB

How do I get rid of a shadow that suddenly appeared on two sides of my square brush?

I did a bunch of work today and rebooted my computer, and checked my brush tip shapes and presets but cannot figure out why my square hard brush has a shadowy edge on the right and bottom.

Just checked my square brushes and they look the same as yours. But if you click on Texture in the brush palette and change the mode to Height, the edges are hard.

No Music in MuVo V100

Now my MuVo V00 says it has No Music when switched on even though it is full of songs. Done formatting, used Tools in the player to Error check etc several times. Still No Music !!! I know others have the same problem. But can't see any real solution offered in this forum. Or simply the player has run its course after less than 2 years of use ? Any tips out there ? Thanks.

I wonder if youstill have this" No Muisc" problem. As I have the same issue again today, I hook up my V00 to the net and use Creative Labs'? MP3 Player? Recovery tool which is avilable onsite here. A new firmware will be downloaded to the player which erases the whole player. So you need to backup your exisitng files if you want to keep them. After I reload all the music to my V00, it plays fine again. It was playing alright this morning until I tried to changed track without looking at it and kept pressing and rolled the wheel, that's when I got this NO Music thing again.

Swatch from square-pattern backrgound

Hi
Am hoping someone can help me. I have an image (JPG) that I want to create a pattern fill / swatch from. Here is the pattern:
Now, I started creating little squares using the rectangle tool and tried to line them up next to each other and fill them in. That takes a long time. I also tried to use 'rectangle grid tool' but couldn't select the squares. There has got to be an easier way ...
Please help
John

You can also make a pattern swatch using your existing image.
Place the image and embed it.
Select and press Cmd/Ctrl+7. Send the resulting rectangle to the back.
Drag both to the Swatches panel.

MuVo SQ 5 GB FM Autoscan prob

Recently purchased a Muvo Square 5 GB
We have come across a technical difficulty.
When autoscan is selected for FM it performs autoscan only on 87.50 and shows saving. It does not save 87.50 nor autoscan's the other stations. We tried autoscaning many times but results were the same.

Muralikrishnan,
Can you manually scan the radio station and manually save the preset? Try moving to a another location just in case the radio signal at that around is not strong enough.
Jason

My Muvo Square FM 5GB has a pr

Similar Messages

Maybe you are looking for