MY MUVO TX FM SHUTS DOWN INSTANTLY AFTER I START IT (PLEASE HE

When the player first shut off after i started it i thought that it was because i didnt unplug it out of the computer properly. Then i picked up the manual and it said that i should format it using FAT only. But i accidentally selected FAT32. The player started to show an error message. i posted a message on this yesterday and someone suggested that i should format it again this time using FAT only. I did that. After the formating was complete i unpluged it frome my comp (this time the proper way). First it played music for about 2 mins and then in turned off. The second time i opened the player it went for about minute and it turned off. Now whenever i start it i see the creative logo, then the muvo tx fm written on the screen and after that it shuts off. What should i do?

Duplicate.
Cat

Similar Messages

  • MacBook Pro keeps shutting down immediately after startup chime

    I booted into Windows 7 on my boot camp partition and was about to play Dirt 3 for the 1st time.  I was in the options menu of the game and my MacBook Pro just shut down/turned off instantly.
    I turned back on, holding in Option so I could boot into Windows again, but the computer just turned off immediately after the startup chime.  I turned on again, this time I didn't hold in Option, so I could boot into OS X (my default startup volume) and the same thing happened - MBP shut down immediately after the startup chime.  I tried again, same thing.  I tried again, and this time it booted fine into OS X, and all seems ok.
    Any idea what's going on?

    Hi. When you were in the recovery drive doing permissions, did you try and run a repair of the boot drive? Did you try single user mode? Try these first and then go back and try to reinstall the operating system.When I say repair boot drive I don't mean permissions. There are both options in disk utilities.When you open disk utilities ,you will see in the left column  two drives plus possibly  a boot partition that look like an external driv. click on the second drive and in first aid use repair disk. If you still can't boot and it will not let you restore, you may have to do a clean install.   http://support.apple.com/kb/PH18869?viewlocale=en_US  

  • My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

    My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

    Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
    In other words, your computer can't talk to your operating system so you can't access your data.
    Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
    First: Shut down your computer completely
    Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
    Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
    If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
    If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
    Hope this helps, it's annoying but it's your safest bet.
    All the best.

  • Final Cut Express Shuts down right after capturing

    Hello all:
    I am using FCE 3.5. I have used this for about a year now and I have developed a problem with FCE shutting down right after I hit escape. I run a lab for a university and it is doing it on ALL of them so it isn't an isolated incident. I repair permissions, reset the PRAM, trashed the prefs and I don't know what else to do.
    I am running imac G5's using 10.4.11 and the new imacs running leopard. Both sets are doing it.
    Any help would be appreciated since our classes start soon.
    Thank you.

    Can you tie the crashes to a recent event: a software update, a new piece of hardware? What else is connected to the computers?
    (You have, of course, triple-checked that the FCE Easy Setup matches the footage you're capturing, yes?)
    After the program crashes, is the captured footage saved?
    What's the lab setup? Does each student have an individual user account? On each computer?
    Lots of questions, I know...
    Here's a suggestion:
    Use Disk Utility to repair permissions. Create a new admin account on one computer. Set the FCE Scratch Disk to the internal drive. Disconnect everything but the camera. Try to capture. See what happens.

  • Illustrator and Indesign shut down immediately after launching!!

    Illustrator and Indesign shut down immediately after launching!!
    What do I do?!

    Hi Taranwadikwa,
    What operating system are you using? What troubleshooting have you tried already?
    - Dave

  • TS3276 Mail application keeps shutting down short after start up - resulting in an error message. how can I repair what is wrong without losing my mail history?

    Mail application keeps shutting down short after start up - resulting in an error message. how can I repair what is wrong without losing my mail history?

    Will I lose my emails I have on there? I have numerous client email files and can't afford to lose any of them. I do have everything backed up but I'm fearful of losing important client info. What if something happened during the back up and it doesn't have my files?

  • Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

    Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • Macbook shuts down unexpectedly after an hour of use

    I've had my MacBook since 2006, and I've had some minor problems now and then.
    But since few days ago, my mac shuts down unexpectedly after I use it for about an hour.
    at first I thought that maybe it's the fan, cause I've never cleaned the fan since the day I've bought it and my mac gets pretty hot after a while. but it used to work just fine when it got even hotter.
    now I'm guessing maybe it's the battery? I've also never replaced the battery to a new one, cause I've almost always used power adapter instead of using battery alone. but I think I've heard it somewhere that the battery still dies even when you only use power adapter. is this true?
    I usually just turn mac right back on when it shuts down, and it goes well for about 30 mins and then it shuts down again.
    could anyone please be kind enough to tell me if it is the battery that's causing this such a frustrating problem? I don't know if this would help figure out the problem, but this is what battery info says,
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 3674
    Remaining Capacity (mAh): 3648
    Amperage (mA): 0
    Voltage (mV): 12443
    Cycle Count: 105

    Thank you so much for answering! I've actually read your answer to other similar forum, and have just installed iStatPro. it says that my fan is "exhaust" and at 0rpm. do i HAVE to replace the fan to a new one? can I just open up my mac and clean out the fan? if so, would you recommend this instead of buying a new fan? one last thing, if I buy a new fan, is it easy for me to replace it by myself? again, thank you so much for your answer.

  • Facebook shuts down unexpectedly after a few minutes.

    When using Facebook on Safari, Google Chrome or the app it shuts down unexpectedly after a few minutes.  I tried restarting my iPad, reloading the app & deleting the cookies.  It's frustrating.

    Gilroy4 wrote:
    Just this evening, my new 23" Intel i3 Mac starts randomly shutting down after a few minutes each time. Thoughts?
    Humm.... my first thought is that the new iMac's only come in 21.5 and 27" and the second is that your not giving us much to go on. You know things like, it ran fine for the first hour, day, week, month, I checked the power cord to make sure that the connections are tight, I followed the User's Guide, it was working fine until I upgraded the RAM, plugged in my printer, an External Hard Drive, I started having this problem after I downloaded xxxx, it fell off the desk, I dropped it down the stairs on the way from the car to the house, the UPS driver kicked it off the back of the truck, you know the basic stuff like that.

  • My calendar just shuts down immediately after opening.

    Hello,  My calendar just shuts down immediately after opening.  I reset the ipad and it still isn't working  Any ideas? iPad 2

    I only kow how to disengae yahoo but maybe the process will help for other email accounts linked to ipad calendar.  Just remeber to go to email accounts and shut down any associations with other programs.
    Here is what I did in yahoo.mail
    Went to My Yahoo
    selected quicklinks (on top left of page)
    Calendar was not shown , so I selected more yahoo services at bottom of list.
    Candar was among many and I selected it.
    You then see your calendar with a margin on left that probably shows a checked box of te name of you calendar.  Uncheck it.
    Also check the subscriptions.  You must decide what makes sense for you there.
    To be more sure,  delete any recent calendar entries in your yahoo calendar or ipad calendar that might have cuased the problem.  that's what happened to me.  I noticed the problem right after I accepted a ics invitation from some else.  I think the ics invitation that I accepteed from my email was the real culprit but who knows.  All I know is that all these things combined solved my problem.
    Close the My Yahoo
    Remeber to check your ipad for any associations and eliminate them and point the ipad calendar to icloud.
    Reboot you ipad
    Check for results
    I hope this helps

  • TS1717 iTunes shuts down immediately after opening (Windows 7)

    I'm having trouble with iTunes shutting down immediately after opening. I've tried reinstalling iTunes and QuickTime, but I'm still having the same problem. Any suggestions? I have a 64 bit version of Windows 7, and the iTunes installer file has "64" in the name, so I think it's a 64 bit version as well.

    Do you get an error message when iTunes shuts down? If so, what does it say? (Precise text, please.)

  • PPC MacMini shuts down immediately after boot, LED blinks

    A client gave me his PowerPC MacMini which boots up but then shuts down after a few seconds. Unfortunately, there's not enough time to open the system preferences between booting and automatic shutdown.
    I've tried to boot the computer from a system DVD and with "T" pressed for target mode, but it always boots up completely from the internal drive. Booting with "Shift" pressed boots in safe mode, but the machine still shuts down after a few seconds.
    Interestingly, the power LED blinks about once per second. I wasn't able to find anything about this on the Net.

    AndyO wrote:
    If, on the other hand, the mini is starting up, and then failing, and the light isn't so much blinking as pulsing, then the system may be suffering protective shutdown as a result of overheating. That can be tested by seeing whether it runs longer after being left unplugged for several hours, thus being cold, than it does if it's been running (or attempted to be run) for some time, and is thus already warmed. In that event, the mini will need to be disassembled to some extent to try and identify whether the fan is running, the CPU heat-sink is firmly attached and the thermal pad which is squeezed between the underside of the logic board and the base of the system is replaced.
    I have a Mac Mini Intel Core 2 Duo that is suffering almost the same symptoms (shut-down almost immediately after startup); however, it DOES appear to be for a variable length of time based upon how much time I let it sit and 'cool' down; therefore, I believe I'm experiencing an over-heating issue.
    I've installed a matching 1GB pair of RAM about 1.5 months ago and all has been fine until now. The unexpected (which is now expected) shutdown after startup is occurring on both Mac OS X 10.5.2 and Windows Vista (on Boot Camp partition) ... of particular note ... the Windows side shuts down more quickly (likely due to it not having the same system monitoring/energy handling tools that would be available to the Mac OS X side ... so I would suspect it to over-heat sooner on the Windows side).
    Successfully completed Hardware tests (simple & extended) reported memory and other system hardware was fine. 'Check/Verify Disk' on Mac/Windows side reported no issues with either partitions.
    Attempts to reset the PRAM and SMC have not solved the problem.
    There was one instance, after startup, that the fan ran at full speed continuously and noticed that the power light was not on at all ... at the time, I was on the Mac startup disk and it stayed up and running for about 20 minutes or more until I decided to shutdown and test the Windows side. Upon restart, the fan did not run continuously, and the Windows side shut-down shortly after start up.
    Overall, I'm fairly convinced it is an over-heating problem. If anyone has any ideas or reference material to confirm or how-to-do "the CPU heat-sink is firmly attached and the thermal pad which is squeezed between the underside of the logic board and the base of the system is replaced" that would be greatly appreciated.
    I am not ruling out sending the machine into the retailer for servicing/diagnostics; however, if there's a relative quick fix so that I don't have to identify and remove confidential/sensitive info first, that would be preferred.
    Thanks.

  • Viber shuts down / close after i open it , tried reinstall

    Viber shuts down / close after i open it , tried reinstall .. Deleting and installing again ..
    Can too much groups cause this ? ..
    What to do ?
    I have iphone 4s 5.1.1
    Thank you .

    Hi guys!
    This is a member of the Viber Team.
    Please contact our support team for further assistance at: http://helpme.viber.com/index.php?/Tickets/Submit/RenderForm/13
    Please feel free to let us know your thoughts, questions and comments, we'd be happy to assist.
    Thanks,
    Viber Team

  • My mac book pro shuts down just after it is started

    My MacBook Pro shuts down straight after it has been started. A bar appears at the bottom of the screen that I've never seen before! A tiny part of it is filled, it disappears and the machine shuts down.

    My suggestion is to work through the options here -> If your Mac won't turn on - Apple Support

  • My imac 20.5" is shutting down unexspectedly after about 10-15 minutes of use.

    My Imac shuts down unexspectedly after about 10-20 minutes of use.  If I unplug the power and wait for a period of time it then boots back.  Not sure if there is some type of sensor that detects heat and then shut down the computer as a safegurad. Coudl the sensor or some other sensor be decting a situation that automatically shuts down the computer?
    Steve

    That's extremely unfortunate. From what I've seen, this could likely be a logic board problem. Just to make sure it is not some kind of software issue, do you have another computer that you could download a linux distro such as Ubuntu? If you do, please get a blank CD or DVD, and burn the distro of linux to it (but not just like you'd burn a normal file, if your on a mac, you do it by opening the DMG (linux distro) that you downloaded with Disk Utility, then burn it from there. If you have a PC, I can give you further instructions, or you can follow the instructions for burning the CD on Ubuntu's website (http://www.ubuntu.com/download/ubuntu/download) and scroll to step 2, or you can order a free ubuntu cd, but that can take weeks to arrive.
    After you have your CD burnt, insert it into your iMac, restart your iMac, and boot from your optical drive during boot by holding down the C key as the computer is starting up. Eventually, the Ubuntu main install screen appears, and select, using the arrow keys and the enter key, the option for trying Ubuntu on your computer before installing. This will start up a live environment of linux that is running on your computer off of your RAM and off of the CD, but has nothing to do with your hard drive. If there is no shutting-down issue in Ubuntu, then you could try mounting your main hard drive from linux, getting all the files you need either uploaded to the internet or copied to an external drive, then re-installing your iMac's software from the original restore discs, then installing all of your software again. If you have a program from Adobe that you paid for (aka not Flash player and stuff like that) say, Photoshop, you need to deactivate your Photoshop license before you restore your operating system, or else you'll have to contact Adobe support because your product may complain, on reinstallation, that your license is already in use.
    If indeed the shut-down happens while you have Ubuntu booted up, then it is a hardware issue, such as the logic board, in which case your best option would be to take it to Apple and have it fixed, especially if the iMac is still under warranty (Applecare, considering the age of your iMac if it is not one of the 21.5 or 27 inch). Replacing the logic board yourself would involve a lot of work on your part, and you would likely break another of the delicate parts inside of the iMac if you don't have the proper tools and aren't too caught up with the anatomy of your iMac.

Maybe you are looking for

  • Game Center Inviting Friends

    Between an iPod Touch 4G and an iPhone 3GS runnning 4.1 - both have game Center and 2 of the same games (Blast4 and FleetMaster) When we go into a game and click to Play Online, then chose a friend from Game Center and click on "Invite Friend", the f

  • Error while transporting Planning board profiles from Dev to QA

    Hi All, I have created planning board profile by copying an already existing Non-Standard profile. The Profile is working fine in Dev and i am able to see all the charts and Graphical objects as per the settings in the profile. But when i transport t

  • Nokia X3 update problem

    Hi,      I've updated my phone and the following has happend: I can't take photos because it says: "please Wait" for a lond period of time; I can't open any photos I pass onto my phone or that I have taken with the camera; also i have lost all of my

  • .tagx Tag files in Weblogic 9.2

    Hi,           We are trying to run one of our applications deploying it to a Weblogic Server 9.2. We are running into problems, as we use .tagx tag files and they do not seem to be recognized. Our .jsp page tries to invoke them as:                   

  • Re-submit a form

    Hey VC experts, I've got the following scenario that I need your help with: - One "Input Form" accepts "Calendar Day" as input and executes more than 10 queries which in turn feed data to more than 10 forms each displaying either a "Guage" or a "Prog