My Muvo V200 Does Not Star

Hi I am a computer developer and an expert Programmer, I Wanted to Upgrade My MP3 Player's firmware but my computer went off in the middle!! then my mp3 player turned off and now it is not getting recognized by the computer and i can not turn it on! if there is any maintainance program which can force my player to freshen it's program tell me so.
AND ABOUT THAT FIRST REPLY:
But, I AM NOT A NORMAL USER!!!! I AM AN EXPERT PROGRAMMER!! and i know a lot about these stuff! just if there is a cure tell me! Somebody else have got this either and he has a note:
"I once had a similar problem with my <FONT color=#cc0000>Creative MuVo V200 Flash MP3 Player. It worked, but I chose to "upgrade" its firmware and due to a bad USB connection it wouldn't boot up later. It didn't even show up as a USB storage device when connected."
Looks like his problem has been fixed! Please help me! i need help instantly, because i need my player now.
Message Edited by arpanah on 0-30-2006 02:45 PM

If the firmware download was interrupted unfortunately the only way to fix the player is directly reprogramming the ROM, which is beyond what a user can do. You'll most likely have to pay for Creative to repair the player.

Similar Messages

  • Lenovo V200 does not support 1920x1080 resolution

    I have a Lenovo V200 (0764-33G) with a LG W2343T external monitor attached which has a native resolution of 1920x1080. For some reason this resolution is not supported by the notebook. It is not a chipset issue as the Intel GM965 chip does support 1920x1080 and I have a number of other notebooks from other vendors with the same chipset that display perfectly on identical external monitors. It cannot be a performance issue becuase the display settings on the V200 allow me to select a resolution higher than 1920x1080.
    According to various posts on the internet, this is a BIOS issue. For some reason 1920x1080 is excluded at a BIOS level. Is this indeed the case?
    I have updated the BIOS to version 65ET60WW and have installed the latest drivers from Intel without any success...
    Is there a fix for this, or has anyone been able to solve the problem?

    Hello rgarnott,
    you might have already seen my other post regarding this issue.
    I came to the same conclusion as you did, that this is BIOS related. But as you, I couldn't find an explanation or confirmation.
    However, I found a way to circumvent this restriction. See the above mentioned post.
    HTH
    Lenovo 3000 N100 0768-BYG; OS: XP

  • MuVo V200 and the M-P

    Hi,
    I just bought the V200 a few days back. Since i have the Creative T7700 speakers, I was wondering if could connect the V200 to the M-Port connector on the T7700 remote.
    Well, actually I already tried to do it - the player powers on, seems to play normally (there is sound coming from the earphones), but there is no sound coming from the speakers.
    Does anyone have any idea how I could get it to play on the speakers? It would be really nice if it was possible to play Mp3s without turning on the PC.
    The T7700 quick start guide states, that the M-Port is compatible with such players as Muvo NX (which is not much different from the V200), but there is no word in the V200 manual about the M-Port. Thanks in advance!

    Crazyfists,
    V200 does not support M-Port. What I can suggest is have the player connected through the line in of the speaker volume control pod.
    Jason

  • MuVo V200 has gone m

    My one year old MuVo went mad on me the other day! It was playing quite happily and then started skipping through the tracks before flying through the playlist titles and, eventually, just dying.
    I tried a fresh battery and the player told me how many tracks there were, but refused to play any. When I got home I plugged it in to the computer, but it didn't recognise it as being there, either as a MuVo or as a flash dri've.
    I managed, in a computer that had never seen it before, getting it recognised as a flash dri've and completely formatting it - but still my computer couldn't see it.
    I've plugged it in in recovery mode (for which the computer tells me it could work faster (USB 2 error) and I've tried reloading the latest firmware, which appears to load until the computer tells me that no device is attached.
    I'm now stuck!
    Has anyone else faced this problem? Is there a know fix - or is it just fit for recycling?
    Ian B

    Crazyfists,
    V200 does not support M-Port. What I can suggest is have the player connected through the line in of the speaker volume control pod.
    Jason

  • MuVo V200 usable as a usb-mass storage

    Hi all
    I think of buying a Muvo V200 MP3 player and I want to know if the Muvo V200 has a feature, allowing me to copy datafiles like presentations or movies on the usb storage of the Muvo V200 or not.
    Do I have to use the Creative Tools to copy these files on the Muvo V200 or can I use a simple Drag&Drop Feature like normal usb mass storage have ?
    Greetz Digger

    okay thanks a lot

  • Why when using Adobe Bridge,  I apply a star rating,  the rating does not show up in Photoshop Elements? [tags]

    Why when using Adobe Bridge,  I apply a star rating,   the rating does not show up in Photoshop Elements.  I use Elements as my organizer and Bridge to view as it is much more user friendly.  Anyone any solutions??

    Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

  • In FF 25 on XP there was a star to left of navigation toolbar to open bookmarks sidebar, now it's on the right, but does not open the sidebar - what's up?

    I want that little star back that opens the bookmarks sidebar. It's just to the left of the address field on XP in FP 25. But on Windows 8 in FP 25.0.1 it's not there. Instead there's a star that sometimes appears on the right of the address bar. But the star on the right does not open the bookmarks sidebar. It only displays a list of bookmarks and options, which do not include opening the sidebar.
    Has this option been removed and replaced with Ctrl B?

    You can look at the Classic Theme Restorer extension to restore some functionality that was lost with the arrival of the Australis style in Firefox 29.
    This includes toolbar icons to open the bookmarks and the history in the sidebar.
    *Classic Theme Restorer: https://addons.mozilla.org/firefox/addon/classicthemerestorer/
    You can check the settings of the CTR extension via its Options/Preferences button on the "Firefox/Tools > Add-ons > Extensions" page.
    See also:
    *https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
    *https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
    *https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox
    *http://forums.mozillazine.org/viewtopic.php?f=38&t=2824649

  • Star Rating bar does not appear with images imported from file

    Using Elements 11, cannot get the Star Rating bar to appear under images imported from file, although the intro to the program shows this as happening automatically.
    Hope this goes through, as I have also created an account, but the question does not seem to be get a post.
    Help!

    Have you enabled Organizer to show details? You can enable show details by checking View > Detail is not already checked

  • SANE does not allow c++ external backend ( epkowa for epson V200)

    Some Epson scanners ( Perfection V100, V200, etcc )  need  an external library  and the corresponding firmware from epson site  ( package iscan  and iscan-plugin ).
    On gentoo, debian based  and rpm based  distrib, sane is compiled to allow such things
    Stock sane from  sane.org and  arch  does not seem  to link with the c++ backend  epkowa  provided  by  epson
    xsane work fine  but   scanimage -L  not ( scanimage is necessary for scripting ) 
    To use an epson  external firmware based scanner , one  have to  compile  sane  by hand
    and modify  frontend/Makefile   
    LINK = $(CC)  [...]    need to be replaced  by  LINK = g++  [ ... ] 
    Lost several hours to figure out where was the prb,  cause the epkowa  sane backend used to work  out of the box on other distrib

    I "SOLVED"
    I replaced the original "epson", "epson2" and "epkowa" drivers with the drivers installed on a notebook with Fedora16 (and sane 1.0.23), and now epkowa profile works good with all resolutions!
    You can download Fedora16 epson drivers here.
    $ ls -l /usr/lib/sane|grep epson
    -rwxr-xr-x 1 pippo pippo 179760 10 set 2012 libsane-epson2.so
    -rwxr-xr-x 1 pippo pippo 179760 10 set 2012 libsane-epson2.so.1
    -rwxr-xr-x 1 pippo pippo 179760 10 set 2012 libsane-epson2.so.1.0.23
    -rwxr-xr-x 1 pippo pippo 122080 10 set 2012 libsane-epson.so
    -rwxr-xr-x 1 pippo pippo 122080 10 set 2012 libsane-epson.so.1
    -rwxr-xr-x 1 pippo pippo 122080 10 set 2012 libsane-epson.so.1.0.23
    $ ls -l /usr/lib/sane|grep epkowa
    -rwxr-xr-x 1 pippo pippo 889 9 dic 11.12 libsane-epkowa.la
    lrwxrwxrwx 1 root root 24 1 giu 18.34 libsane-epkowa.so -> libsane-epkowa.so.1.0.15
    -rwxr-xr-x 1 pippo pippo 620651 9 dic 11.12 libsane-epkowa.so.1
    -rwxr-xr-x 1 pippo pippo 620651 9 dic 11.12 libsane-epkowa.so.1.0.15
    Last edited by quellen (2014-06-05 11:57:25)

  • Time Machine does not display old files: the star wars screen stays stuck

    I have been looking for an known report, but can't find it.
    In Time Machine, I don't see the 'star wars' panels anymore. It was working when I installed it.
    In an activated Timemachine screen, the date slider on the right of the screen does not react. Only the front most screen is seen = "now".
    I used to have time machine on an airportextreme; but because of adding a shared USB printer I had to move the external HDD to my own iMac.
    Time machine tells the backups are successful.
    Did I do something wrong by moving the HDD around?
    Did I do something wrong with 'permissions'? [I added myself as a user with read permissions.]
    Should I reinstall Timemachine?
    thanks in advance
    albert

    alberti-nl wrote:
    Hi, and welcome to the forums.
    I used to have time machine on an airportextreme; but because of adding a shared USB printer I had to move the external HDD to my own iMac.
    Time machine tells the backups are successful.
    Did I do something wrong by moving the HDD around?
    Sort of. Time Machine stores backup differently when they're done locally vs. over a network.
    Double-click your external HD. It should have a "sparse bundle" including the name of your computer. Those are your network backups.
    Double-click the sparse bundle to mount it, then try Time Machine again. If that doesn't work, quit Time Machine and control-click the TM icon in your menubar, or right-click the TM icon in your Dock, and select the +Browse ...+ option. That should show your backups in a small window; select them and click the +Use Selected Disk+ button.
    Post back with your results and we'll explain further and see how you want to proceed.

  • MSI Star key 3x fatser, license does not include device !!!

    Dears,
        I have my MSI star key bluetooth device from 1.5 years, it was working perfect on my windows XP SP2. Then I had some problems with my windows, and I wanted to re-install again the driver (after de-installing the current driver) but I found myself getting the following message, when I try to start the bluetooth device:
    "your bluetooth software license does not include use with this bluetooth device. [6]", and when I point out to my CD for the license file, I get this message "Bluetooth software license file not found. [2]".
    I have tried the driver coming with the device CD WIDCOMM version 4.0.1.2101 and was working for more than 1 year, and also I have tried the new driver on http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=131&prod_no=101 WIDCOMM version 4.0.1.2900 several times with lots of combination and nothing is working, the bluetooth is still red and refuse to start.
    I found the same issue is posted too much over the web regarding the WIDCOMM software in general and solution with something as patch I could not find.
    I checked the fixed posting on this forum, but it seems all included URLs in the posting are not working.
    It seems that contacting MSI support is a waste of time. Could anyone provide guidance or help for me.
    Thanks in advance

    Quote
    It seems that contacting MSI support is a waste of time.
    Have you even tried? Visit http://ocss.msi.com.tw, enter your email address and open a new ticket.

  • MuVo V200 not detected on

    And I have on the screen this message "file sistem error" then it shut down
    I try to connect on usb but my computer did not detect this hardware so i could not format or do anything Pls i'm desperate HElp me I have this device for only a day andnow is not working .... I try to restore with your soft MuVoV200_PCFW_L4__0_03 but it still doesn't detect MuVo V200 then I think my usb is broken and I went to a friend and try there...same result then I try to laptop Brand Averateg and get the same result **bleep**... It must have a problem but I could not understand what...Please if you can help me with any advice deosn't matter how complicated I will try to submit your indication...Many Thanks in Advance

    Hi there.. encountered the same problem also. And I've got a solution from creative techinical support and it works..
    http://us.creative.com/support/kb/ar...p?l=3&sid=4656
    Cheers,
    Eunoshishi

  • Ibg-star glucosemeter does not work with iphone 5s

    My iBG-star bloodglucose meter does not function with my iPhone 5s, together with the apple ligthning adapter and app
    It did work in december 2013, after january 12th of 2014 it failed. I already have deleted the app, and restored my iPhone.
    Strangely, on my iPad mini it works fine!!! Is there some setting incorrect on my iPhone???

    Try a restore of the iPhone .The last update may have corrupted the iOS installation
    Restore will install a full fresh copy of iOS 7.0.4
    ps do you find meter a worthwhile purchase ?
    Restore  see here
    http://support.apple.com/kb/HT4137

  • Selector button does not move - Lock/Unlock Muvo T

    Hello my name is Robbert from amsterdam. I have had a Muvo TX mp3 player for over a year now..
    I can install 28 MB on it, and only 4 songs maximum.. Is that correct..anyway, I cannot move back and forth between files anymore, the Selector button does not allow me to do this. There is the indication that "Shuffle" is on and the little music key shows in the left corner, but the sweet baby is just completely stuck! I cannot even forward to tracks, or within a track ! I have downloaded the latest driver, but when I release the play button after I see "New hardware found", there is no Recovery field showing in my mp3 player. I don't know what I am doing wrong and I hope someone can help me out here.
    All help or suggestion is greatly appreciated!!!

    Hi Robbert
    I can install 28 MB on it, and only 4 songs maximum.. Is that correct
    What size is the player? What bit-rate have you ripped the songs at? Do the 4 files take up 28MB when on your PC?
    ..anyway, I cannot move back and forth between files anymore, the Selector button does not allow me to do this. There is the indication that "Shuffle" is on and the little music key shows in the left corner, but the sweet baby is just completely stuck! I cannot even forward to tracks, or within a track !
    This may be a physical problem with the switch or it may be the firmware. Try a firmware reload first.
    ?I have downloaded the latest driver, but when I release the play button after I see "New hardware found", there is no Recovery field showing in my mp3 player. I don't know what I am doing wrong and I hope someone can help me out here.
    Complete the New Hardware Wizard when it appears. Nothing shows on your player when it is in Recovery Mode - it is just a way for your PC to connect to your player without using the firmware. When in Recovery Mode run the firmware file to do the reload.
    PB

  • Muvo V200 not supported anymo

    H to all and Happy Christmas :-),
    I've just received a Muvo V200 Gbyte for present. I haven't seen it on the page. I've seen the Muvo N200 which looks similar but with more features. Is the Muvo N200 similar to the V200 or have I received a procuct which is not going to be updated in the future :-/?. If the Muvo V200 is similar to the N200 I presume the firmware will be nearly the same, Am I wrong?
    Thanks :-)

    The two products are very similar (they were both launched around the same time), just with a slightly different feature set. More detail here.
    Only Creative know what the plans are for each player in terms of updates.

Maybe you are looking for