My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

Hi keciakh,
To try and get the paper to feed, with a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the error. Once this has been done, please look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely. Next, please remove and reseat all of the ink tanks in the printer. Once all of these steps have been performed, please follow the steps below to perform a roller cleaning on the printer:
You need to prepare: three sheets of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Open the paper output tray gently.
3. Select Roller cleaning.
(1) Press the MENU button.
(2) Select Setup, then press the OK button. The setup menu screen will appear.
(3) Select Maintenance, then press the OK button. The Maintenance screen will appear.
(4) Select Roller cleaning, then press the OK button.
The confirmation screen will appear.
(5) Select Yes, then press the OK button.
(6) Select the paper source to clean (Rear tray or Cassette), then press the OK button.
4. Clean the paper feed roller without paper.
(1) Follow the message to remove any paper from the paper source you selected in (6) of step 3.
(2) Press the OK button. The paper feed roller will rotate as it is cleaned.
5. Clean the paper feed roller with paper.
(1) Make sure that the paper feed roller has stopped rotating, then follow the message to load three or more sheets of A4 or Letter-sized plain paper in the paper source you selected in (6) of step 3.
(2) Press the OK button. The machine starts cleaning. The cleaning will be complete when the paper is ejected.
(3) When the completion message appears, press the OK button. The screen will return to the Maintenance screen.
Reference
To access other available functions, use the mode buttons or the MENU button.
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

HT1212 How do i restore my iphone when it has been disabled and can not be restored through itunes because of the error message that says "The iphone software update server could not be contacted.

How do i restore my iphone when it has been disabled and cannot be restored through itunes because of the error message that says "The iphone software update server could not be contacted

Have you jailbroken this device? This will make the iPhone not talk to the Software Update Server (that signs and accepts software updates) please refer to the following link? Error 3194, Error 17, or "This device isn't eligible for the requested build"
The iPhone will talk to the software update servers, just need to change the host files, it's a simple process, sorry if you were confused about the wording in to top?

I can not seem to back up my iPhone 5s, error message is: iTunes cannot back up this iPhone because not enough free space is available on this computer

I can not seem to back up my iPhone 5s, error message is: iTunes cannot back up this iPhone because not enough free space is available on this computer
There is plenty of space over 260gb

Are you absolutely sure there's 20GB in use, and not that it has 20GB free? If you click on the hard drive icon on your desktop and click cmd-i to Get Info, what is the available space?
Matt

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless.

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless. Do I need some kind of upgrade?

Don't use the CD software its not necessary.
Infact put it in the trash.
Your router will have an IP address in the range 192.168.1.1
Connect your router to your Mac via Ethernet cable (They usually supply one with the router and don't worry which end goes where the Mac LAN socket is bi-directional)
Also connect your router to your telephone line.
Now open your Web browser Safari . Type in the IP address above and a Javascript control panel will launch
Enter the default password and username (They are on a label on the router )
Your now have the ability to set up your router.
Your will need the password and user name supplied to you by your ISP at a minimum.
Enter these and most modern routers automatically configure the basic networking setting.
You now need to go to the security setting and set this as WPA2 Personal (NOT Enterprise) or WPA2 with AES and TKIP which ever it refers to and create a pass-phase. WRITE it down
You should be online.
Now remove the cable and connect to the Wifi and enter that passphase.

My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?

My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?

You need to reinstall OS X:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

HT201412 My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Facetime is not available error message, any suggestions?

facetime is not available error message, any suggestions?

Hi ftruseljr,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Cheers,
- Judy

Since updating my iPhone 4 the FaceTime app has gone and I can not find it anywhere in my iPhone/setting/laptop. Any suggestions how I get it back?

Since updating my iPhone4 the face time app has gone. I can not find it anywhere in my phone, phone settings or in my back up. Any suggestions as to how to get it back?

You access Facetime through the Contacts app - there is no Facetime app on the phone.

When i go to System Preferences and click on Desktop and Screensaver the computer goes to that screen but gets stuck and does not respond no matter how many times i try. Any suggestions?

When i go to System Preferences and choose Desktop & Screensaver the system locks up and will not show any options. All i get is the circle of color and have to do a force quit. Any suggestions?

First follow the instructions in this support article.
If an iPhoto or Aperture library is the source of your desktop pictures, it may need to be rebuilt, or you may need to update the application to the latest version.
Otherwise, continue as below.
Back up all data.
In the Finder, hold down the option key and select
Go ▹ Library
from the menu bar. From the Library folder, delete the following item, if it exists:
Caches/com.apple.systempreferences
and move the following items to the Desktop, if they exist:
Application Support/Dock/desktoppicture.db
Preferences/com.apple.desktop.plist
Launch System Preferences and test. If you still have the issue, put the items you moved to the Desktop back where they came from and post again. Otherwise, delete the items.

Can't click on links in an email and successful launch browser/link. Get a "General failure" error message. "A failure occured sending the command to the application."

This started happening after I updated my firefox version - exactly why I'm usually reticent to do so. If I click on a link or image in an email I get the aforementioned error message. Please help.

Is Firefox your default browser? You have to have a default browser because the email client just sends out a notice to the default browser.
* http://kb.mozillazine.org/Default_browser

I installed the latest ios8 upgrade on my iPad mini yesterday and now I can't iprint. The printer issues a 'urf error'. Any suggestions.

I Installed the latest ios8 upgrade on my iPad mini and now I can't iprint. The printer issues a 'urf error'.

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

My Macbook Pro is 18months old and has recently slowed down. specifically it wont load photos on Autotrader any suggestions?

My MacBook Pro is 18 months old and has just started to slow down. It is also not loadng certain photos from the autotrader website if this is relevant?

You may be able to improve the speed with some software work but it could also be your disk or SSD is corrupt or failing.
Try an SMC Reset:
http://support.apple.com/kb/HT3964
Is it faster now? If not, proceed.
Backup your data immediately:
Before proceeding you should make sure you have a current backup. If it has been getting slower over time your disk could be a failing slowly. SATA drives have two retry modes: short and long. They can continue operating as read errors are increasing. The long retry cycle is very long and can cause significant performance degradation. If it has started long retries then it is likely to get worse and eventually fail. SSDs also have a failure mode where the fail slowly.
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031
Try the remedies at http://www.macworld.com/article/2026650/mac-troubleshooting-what-to-do-when-your -computer-is-too-slow.html
and
Mac Performance Guide: http://www.thesafemac.com/mpg/
Safe Mode:
- Reboot the system in Safe Boot mode.
- Power on the Mac and when you hear the bong, hold down the shift key until it is booted.
- Be patient, this will take some time while it checks the filesystem.
If it runs faster in Safe Boot mode then it is probably third-party software compatibility issues.
- Restart.
- Does it run faster after the restart?
Spotlight: If Spotlight is continually running, re-index Spotlight:
http://support.apple.com/kb/ht2409
Runaway processes:
Launch Activity Monitor (in the Applications/Utilities folder).
Click on the CPU heading.
Are there a process taking up a large percentage of the time?
If so select it and click on the upper left hand X to force quit the process.
Run Disk Utility (found in the Applications folder):
-In Disk Utility look at the S.M.A.R.T. Status.
If it says the disk has a hardware problem that can't be repaired then stop.
Your system could be in danger of failing at any time and you need to replace the disk soon.
Back your system up twice.
(You will need a second external disk for the second backup.)
Consider using Carbon Copy Cloner or Super Duper! for the second backup to clone the disk.
Jump to the Hardware replacement section and seek expert help.
Repair Disk Permissions and Verify Disk. If Disk Permissions reports errors, don’t worry. That is normal. If Verify Disk reports errors then they need to be repaired. Otherwise skip to the reinstall OS X section.
Repairing your system disk:
- Boot in recovery mode.
(Boot and when you hear the bong hold down the
Command and R keys simultaneously until you see the recovery screen.)
- Select disk utility.
- Select your system drive.
- Repair Disk.
- Did it complete without errors?
If not you may need a new disk or SSD. Seek expert help.
If it completed normally then reboot.
-Did it boot faster and is it more responsive?
Reinstall OS X:
If it is still slow you should reinstall OS X.
- Boot in Recovery Mode again.
- Follow the instructions to reinstall OS X.
- Now does it boot and run faster?
Hardware replacement or upgrade?
Hopefully by now your Mac is back to its normal speed. If a hardware repair is indicated take it to an Genius bar at an Apple store for a free diagnosis and estimate of repairs. If it is under warranty or AppleCare they will repair it for free. If not, you can compare their estimate with DIY repairs.
Genius reservation http://www.apple.com/retail/geniusbar/ .
or find an Apple Authorized Service Provider https://locate.apple.com/country
You can speed it up further by upgrading some hardware. For the following memory, disk or SSD replacements and upgrades check out OWC http://eshop.macsales.com/, Crucial: http://www.crucial.com/ and Kingston http://www.kingston.com/us/. You will need to know your Mac the year and season your Mac was first sold and model number which can be found here:
 > About This Mac > More Info… > System Report > Model Identifier:
If your Mac has 2 or 4 GB of RAM, consider an upgrade to 8 GB (if the memory is upgradeable). An 8 GB memory upgrade is only $100. When I upgraded a MacBook from 2 GB o 8 GB it booted thee times faster.
If your Mac has a disk and it won’t repair properly, is low on disk space, or you just want a considerably faster disk, check out an upgrade to an SSD-Hybrid disk. Google "Seagate 1TB Solid State Hybrid Drive SATA 6Gbps 64MB Cache 2.5-Inch" or consider an SSD (120 to 480 GB).
OWC has SSD replacements and upgrades for MacBook Airs and Retina MacBook Pros.
Good luck. May the software fixes do the trick.

I am trying to install acrobat but keep getting a message saying it was interrupted and was not installed fully try again later tried umpteen times later - any suggestions what to try

I managed to download to my desktop entered key etc but when I try and install the wizard says it was interrupted and not fully installed no changes made to the system try again later - did this loads of times - same response - anybody any ideas what Im doing wrong?

Hi
Sorry I was away for a while – how do I run check disc on windows 8. The laptop is new and is an Aspire V17, I believe it has a high spec and therefore should have no issues??
Phil
(Phil Dickinson)

My iphone 4 will not turn on. I can not soft reset because my home button is broken. Any suggestions?

My iphone 4 suddenly died on me. It had a good amount of battery life left. I cannot soft reset because my home button does not work. Is there a way to reboot without the method of holding the two buttons? I am thinking that letting the battery die will work but I assume it will take a long time since the phone is off. Any other way to get it to turn back on/rest?

Plug it into the wall charger or to your computer with iTunes.

TS1389 I have Windows 8 and can't find a way to authorize my new computer. Any suggestions?

How do I authorize my new Windows 8 computer?

hold down ALT + S while in iTunes, then select Authroize this computer.

My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

Similar Messages

Maybe you are looking for