My N73 has a error in the LCD

hi friends , my N73 has a problem.
when the cell phone is in the stand by mode , suddenly the LCD colors mixed together , I formated it , after that I updated the software , but the problem didn't solved yet ,
please guide me

Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Elsewhere:
http://www.nokia.com and select your country.

Similar Messages

My photosmart c4280 has an error and the screen says to turn power off and then on again.

my photosmart c4280 has an error and the screen says to turn power off and then on again

Please try temporary connecting your printer to some other power socket, without using any power extention or hub.
If the same issue persists, contact the local HP Support center, as it seems like and hardware or Power Supply problem.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Releasing transport request has an error during the 'export' step.

Hello Everyone,
My environment is ERP 6.0 EHP6, AIX 6.3, Oracle 11g.
We have a transport request that was created in our development system by deleting some obsolete roles. When we try to release the transport request to our q/a system it terminates with errors in the export step.
The errors are.
   End of export R3TRTABUUSR10
   no E071K or E071K_STR entries found for R3TRTABUUSR11
   Start export R3TRTABUUSR12 ...
   no E071K or E071K_STR entries found for R3TRTABUUSR13
Of course we cannot create a new transport request because the roles were deleted.
Can someone please explain to me what could have cause this type of error and possibly how to resolve it?
Regards,
Ron

Hi Ron,
As per your log, no E071K or E071K_STR entries found forR3TRTABUUSR11
no E071K or E071K_STR entries found for R3TRTABUUSR1
Looks like there is no entry found for E071K or E071K_STR in table USR11 and USR13.
Please check those table and make sure the above entries are there, if not that could be the issues.
Also, please check if these tables (USR10, USR11, USR12 USR13) are active in SE14.
Thanks
Adil

Brand new Canon 5d mark ii has dust inside of the LCD screen.. !!!

Hello guys. I just received Canon 5d mark ii + 24-105mm lens kit in the mail couple of days ago. It's an amazing camera that will help to improve my work. I didn't want to use the camera until I received the screen protector and the UV filter to make sure that the camera is well protected. (My previous SLR ended up having so many scratches on the LCD screen)
So today I received the screen protector. I was cleaning the Lcd screen to install the protector and I realized that there is a dust inside of the LCD screen. I didn't even use the camera more than to see if it functions right. It's totally visible.
I was wondering if anyone had this problem with their brand new camera ?!?!
I know there is an option to exchange the camera since it's in the return/exchange period but I really don't have time for this. I have photo shoots coming up and I really can't be without my camera more than couple of days. Unfortunately they don't have the kit in any of Bestbuy location in Los Angeles area that I can go in and exchange. They will ask me to return the camera kit to a Bestbuy location and wait for them to credit my Bestbuy card (which will take 3-4 days - and i don't have enough credit limit to buy another one right away and be patient for them to give me my money back ) and replace an order online again.
Any advice appreciated...
Thanks

First of all. Thank you for your reply. I actually realized couple of other things that made me suspicios that this camera was used before. Of course i might be wrong however - the package shipped from Bestbuy Return center + loose diopter adjuster knob before than even touching it + having dust inside the lcd screen + hair and dust inside the lens - made me really uncomfortable keeping this camera.
Don't get me wrong, I love Best Buy. I've been shopping from Best Buy for years. I have been purchasing many things every year and I really do trust them. That's the reason why i didn't mind to have Greek Squad 3 years extended waranty package with my purchase. However spending almost $3500 for a top of the line camera and not having it flawless from the first day made me a little disappointed. That's all..
I will be going to Best Buy later today and return the camera. I am just hoping that they can refund the money to my card in couple of days so i can place an order for a new one. Even better if i can return the camera and they can place an order from the store for me..
Thank you so much for your reply again...

When I try to run, I has an error in the server.

starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -DproxySet=false -Djbo.34010=false -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.56\DEFAUL~1 -Doracle.home=C:\Oracle\Middleware\jdeveloper -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.56\DEFAUL~1\config\oracle\jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Xms1024m -Xmx1024m -XX:MaxPermSize=256m -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
Error occurred during initialization of VM
Could not reserve enough space for object heap
an then in Internet Explorer i has this message....
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Thanks by your help

Please have a look there: http://www.oracle.com/technology/products/jdev/htdocs/11/knownissues.html#dep2
regards
Peter

HT201210 the download of updates has an error at the end that my firmwear file is not compatible?

An error appears when trying to download my iphone the my firmware file is not compatible?
What does this mean?

Delete it? My iPhone was connected to my laptop, and I said Download and Install (or whatever) from iTunes. It downloaded it, then announced the firmware version was wrong... so I know of no intermediate file to delete. I just tried it again, hitting the Download Only button, but I see absolutely no indication of where that file would be stored, or, now that it is (supposedly) downloaded, how I would go about installing it. Thanks for your suggestion, though.

I m having ipad 4th gen it has a error in the sim card .somtimes it works three days othertimes ipad is in notservise whats wrong with my ipad.....????

Need a help to get rid of this error sim card is working randomly

Is there an error message appearing when this happens? Are you in the same area or different areas when this happens?
In the meantime, I would try to take the SIM card out and then put it back in.

My macbook air has a crack on the LCD screen.

Is it just me or do they break really easily. If i take it to the apple store can they repair it?

Not so, many of the Apple Stores do in-house LCD's. When my MBA's screen developed a bright spot, I dropped it off and had it back with a new LCD in less than four hours.
Having said that, just because it cracked, doesn't mean they'll fix it for you for free.

Firefox won't work, every website has an error like the internet isn't connected but internet explorer works fine, how do I fix it?

This is the message I get for EVERY website I have tried: Firefox can't establish a connection to the server at support.mozilla.com. I have checked the firewall and didn't notice any problems but I might not know what to look for. I have uninstalled and re-installed the program and still have the problem, I have also tried on different wireless internet signals and restarting my computer. I am using windows 7.

No problems here with that visited counter on your website.
Which extensions did you install?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

Upgrade failed and now itunes tells me it has an error in the last backup what do i do

Afternow upgrading for several days as i had problems with the last upgrade i finally last night upgraded. This morning the phone doesnt work and when i try to restore the backup done just before upgrading itunes tells me there is a fault with it. Is there any solution or am i just stuck starting again from the begining

See if this troubleshooting helps : http://support.apple.com/kb/TS3694#error1604

My iPod Nano Touch has an error syncing the songs.

It will not let me sync anything now! Help!

Do you mean it is engraved?
If so you can look for a metal shop near you and pay to have it removed but it will leave a blemish. Go with a tight case.

Wlserver.exe has generated errors.

Hello,I installed the Weblogic server 5.1 service pack 8 with the installation instruction guideline under Windows 2000, and used wlconfig.exe to make changes to my installation configuration as described under installation.Restarted the weblogic server and got the following message:===========================================Program Errorwlserver.exe has generated errors and will closed by Windows. You will need to restart the program.An error log is being created.OK===========================================I don't know what the errors I has made. Please help.Thanks,Sam

If you could provide more details on your operating system, etc. -- that
would be great.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Adam Kuehn" <[email protected]> wrote in message
news:3a75ce3a$[email protected]..
I work in the same office as Paul, and have been trying to get Weblogicserver 5.1 installed on my Pentium IV machine. (Your website does not
distinguish between the various pentium flavors, professing compatibility
with them all.) The InstallShield begins to do its thing, but just before
it finishes, I get the message that the program WLPASS~1.exe has generated
errors. The InstallShield finishes, but a subsequent attempt to launch the
Weblogic Server results in a message stating that wlserver.exe has generated
errors. Similar messages result from any attempt to launch the programs in
the Weblogic directory.Can you give any help?Thanks,-Adam Kuehn

Error: Accessing the Reader Extensions Server web application for the first time

Hi,
I've followed the the installation guide line by line. Everything OK.
But when i access the Reader Extensions Server web application i see the following error:
An error has occured
Error 473: The credential permission settings could not be determined: 'com.adobe.document.pdf.CredentialLoginFailure: IDL:com/adobe/document/pdf/CredentialLoginFailure:1.0'.
Have you ever faced this kind of message before?
To tell you the truth i'm not very sure if my Rights Credential file is valid. But is this the cause of this message?
I use Form Server 6 and Reader Extensions 6 with a Websphere Application Server 6.0
Thanks in advance

Hi Stelios,
Yes, it seems to me also, as a bad certificate issue.
If memory serves, I run into this message once, where the certificate was valid. Anyway, Websphere v6 is not a supported app server. Have you tried installing on v5.1?
You might want to read this post, too:
matt cockburn, "Fix for LiveCycle Reader Extensions 7.0 install error" #, 6 May 2005 8:22 am
If you are located in Greece, we may be able to help you. You may contact me "ekokkoris at anodos.gr", should you wish.
Regards,
Evangelos

If I copy the "lcds" folder, Tomcat starts with socket errors

In the documentation it is said that when you create a new server-side application, you can start by copying the 'webapps/lcds' folder. I did that but then, Tomcat starts with some socket errors:
[LCDS]SocketServer 'my-rtmp-SocketServer' failed to pre-validate desired socket settings for BindSocketAddress: 0.0.0.0:2038
java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
[LCDS]SocketServer 'my-rtmp-SocketServer' failed to start.
flex.messaging.LocalizedException: SocketServer 'my-rtmp-SocketServer' cannot bind to accept client connections on port '2038' because another process has already bound the port. Please ensure that multiple endpoints across all applications are not configured to use this same port.
Am I doing something wrong?
Thanks,
Borek

What is happening is that you are getting a port conflict for the socket-based NIO and RTMP endpoints used in the channel definitions in the services-config.xml file of your new web app. The issue is that you have endpoints bound to the same port in the LCDS web and in your new web app.
You can deal with this one of two ways:
Option 1: In that services-config.xml file, search on "RTMP" and "NIO" to find the channel definitions and change the port numbers to something slightly different than the ones used in the LCDS web app.
Options 2: Move the LCDS web app out of the picture so it doesn't get loaded, and just use a template for future web apps. If you aren't using it for any of your development, there is really no reason you have to load it.
I'll add a note about this to the documentation that talks about using the LCDS web app as a template.

Error message: ni: A frame has been dropped and the acqusition has been canceled

I use a NI PCIe 1433 framegrabber with a Basler spl4096-140km line camera.
Using triggered acqusition with an external source, I can get a framerate of 68500Hz in NI-MAX.
When I use the Matlab image acquisiton toolbox to acquire data, I however very often get the error message: 'ni: A frame has been dropped and the acqusition has been canceled". This happens even at much lower framerates (20kHz) and only seems to go away when acquiring data slowly.
Computer is a Dell Precision 7600 and I assume there should be no issues with RAM or the PC being slow. The error does not go away when reducing the data size (i.e. reducing the ROI to one single point that is readout).
Do you have any pointers why this error message appears and what can be done about it?
Thank you!
Reto

Hello,
I encountered the same problem and I think it is because the allowcation of storage in matlab cannot catch up with that of the camera so that it will drop frames when the buffer is full.
I also want to know how to solve that.
Yang

My N73 has a error in the LCD

Similar Messages

Maybe you are looking for