My N80 handset has no sound when answering calls.....

my N80 handset has no sound when answering calls... but when i turn to my loudspeakers and plug in my earpiece, it function normally when i answer the calls...i cant hear any thing from handset when i keep near my ear, but when i on speaker i can hear the other party voice...
a few days ago, it was fine... i didnt drop the phone or what...
my warranty has expired... i wish that someone can help me to solve it by DIY.. haha..
thanks...

Sounds like it can only be one of two things.
1. The speaker is broken.
2. The ribbon cable connecting the two halfs of the slide is starting to go. The ribbon does give problems after a while. Sometimes when the cable starts to go, it still works when the slide is closed but not when extended. try it and see.
Both the speaker and the ribbon cable can be replaced at your local Nokia care centre.

Similar Messages

No sound when answering call

I have had this happen to me quite a few times since getting this phone a few months a go. I answer a call and nothing. No sound at all. I can't hear the person. The only way I have found to fix it is to reboot my phone by taking out the battery. Has anyone had this problem or have any fixes for it?

Welcome to BB Forums! I have a CURVE 8330. I had the 4.3 OS. I frequently had the same problem with mine. I could answer the call or even call someone, they could hear me but I heard nothing. I had to do the battery pull trick. However, on Saturday I upgraded to 4.5 OS and I haven't had it happen again. i have heard that the software had a problem. Maybe you can upgrade? Hope that helps...
Nurse-Berry
Follow NurseBerry08 on Twitter

Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

Hey shahbazfromgbr,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
2. Make sure the Ring/Silent switch is not switched to silent.
3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks,
Matt M.

My Nano has no sound when connected to car stereo USB

My Nano has no sound when I connect it to my car stereo USB. The display works though

Why don't you try changing the input on the car stereo? I have a '13 Honda Odyssey and whenever I plug in my 7th gen nano I have to press a button labeled "USB/Aux" to switch to the Nano. I would also make sure to check that it is nano compatible, that the volume is up and that the stereo is on. Not to make you sound dumb, but you honestly might feel that way if you had the stereo off, I know I would (and have!)

My macbook has no sound when i go to system preferences there is a tick on mute and i cant take it off and it also says there is no input device do you know what to do.

My macbook has no sound when i go to system preferences there is a tick on mute and i cant take it off and it also says there is no input device do you know what to do.

Might be corruped sound preferences ..
Type or copy paste the following;
/Library/Preferences/Audio
Click Go the move both .plist files from the Audio folder to the Trash.
com.apple.audioDeviceSettings.pllist
com.apple.audio.SystemSettings.plist
Restart your Mac. See if that made a difference ...

My daughter's Ipod has no sound when attempting to playback music and also no radio reception. Just got it for Christmas. HELP!

My daughter's Ipod 7th generation -- which she just got for Christmas -- has no sound when playing back her music and also has no radio reception. Tried different headphones and resetting the Ipod -- no difference. I was working fine Christmas and the day after. HELP!

do you have headphones plugged into it?
the headphones act as an "antenna"

My iPhone 4S has no sound when I play music, videos and movies

My iPhone 4S has no sound when I play music, videos and movies

Is the slider all the way to the right??
And no, if your phone is vibrating when you get texts/calls then you're not in Do Not Disturb. You would see a Crescent Moon symbol to the left of Battery % if it was on.

My iphone 4 has no sound when on im on a call.

my iphone 4 has no sound when on im on a call. I can hear people, but they cant hear me I have no water damage, all the other sounds work, and im constantly losing service.... any ideas about what is going on? it would be appreciated!

oh and sometimes the sound works but it fades out as the call continues

My iphone 4 has no sound durring a call unless its on speaker, My iphone 4 has no sound durring a call unless its on speaker

My iphone 4 has no sound durring a call unless its on speaker. The person on the other end can hear me fine.
Thanks

See Here...
http://support.apple.com/kb/TS1630

Low sound when somebody calls me?

I can only hear a low sound when somebody calls me, trough my ear speaker next the facetime camera. What is wrong?
Is it the speaker that is dead? Or is it the settings?

Go through this article - http://support.apple.com/kb/TS1630

Screen cannot lock or go black when answering call

This make me always touch the button of the screen when answering calls...is it the sensor problem?

I have the same problem could some one tell us what we. Should do ?

N80 crashes when answering calls using slider.

Have spoken to Orange about this and they are saying (as if they'd say otherwise) that this is a 'new' issue for them. Has anyone else experienced this?
Phone call comes in - open the slider to answer call only to have the phone lock-up. None of the menu buttons or keypad work. The phone keeps ringing with an active display but the only button that works is the power!
Orange have referred this to technical support.
V 3.0614.0.3
11-04-2006
RM-92
Nokia N80 (31.02)
Thanks,
Matt

Well, after another referral to Orange Tech Support, I finally have a new handset.
I started having more 'crashing' events on my phone when using sms, gallery, camera.
Called Cust Service who wanted to do the same stuff all over again...i.e. reset phone but I insisted that they escalate it.
They got back to me within 72 hours and I had a new handset the following week. Upon checking I now have an up-to-date firmware.
As an aside, the new phone actually feels a lot different. The slide is firmer and more stable and the keypad also feels of a better quality. Anyone had similar experiences?
Cheers,
Matt

My iPod touch has no sound when I play music or use the iPod touch at all. Yes, the volume in the "sounds" is all the way up. It has not been dropped or gotten wet. I turned it off and on. now what?

My ipod touch (4th generation) has no sound. I have turned it off and on.....I have the volume up in the "sounds" area. When I push the side volume button, there is no image that appears in the screen that shows that I am either raising or lowering the volume. Do I need to just rest the ipod touch as a new device? Or is there someting else I can try?

And, now when I do press the side volume buttons, the image appears but with the words' "sound effects." what does that mean?

My iPhone 4 has no sound when playing music or videos-help please?!

Hi - my phone has stopped having any sound when playing music or videos, no volume bar either. No key noises either - but I can live without those!! I can hear sound through headphones, though sometimes that's intermittent. I have tried cleaning ports, restarting it, restoring it, pressing right hand corner of screen, taking headphones in and out repeatedly, pressing speaker twice whilst making call, blowing air into charging port, flicking volume switch on and off on side etc yet nothing has worked. Please can anyone else help? Apple want £135 plus vat to service it which isn't worth it in my opinion!

Is the mute switch on?
Is Do Not Disturb mode enabled?

MTS file has no sound when importing to AE

I have 2 computers.
On computer 1, I import a MTS file and it has sound. All good.
On Computer 2., iimport the same MTF file and it has no sound.
How come?
Both machines have CS6. Windows 7 and as already mentioned, same MTS file ( coming from Panasoic Camcorder)
Thank you

here are my answers to the questions (btw - thank you very much for helping me here)
- Absolutely correct. The "working" machine shows the wave audio things when I press LL and the "not-working" machine does not.
- No, the "non-working" machine does not give the option to enable/disable the audio (under Speaker icon).under the Speaker icon, its just empty.
- When I import the video on the "non-working" machine, no matter where, it has no sound (footage panel, composition panel, ... ). but when I import other videos on this "non working" machin, it DOES work and it CAN import audio just the way it should be. It is just MTS files can not be imported with Audio on this "non working" machine.
-I tried with brand new project, same thing. not working audio

My N80 handset has no sound when answering calls.....

Similar Messages

Maybe you are looking for