My N80 takes about 3 minutes to send a text!!!

Hey!! My Nokia N80 takes about 3 minutes to send a text message, does this happen to anyone else? Whilst the message is sending my phone will not allow me to do anything else. Is this normal? Should it happen? My N80 is also very slow when going through the menu's, is it to do with the software, if so, how do I go about getting it updated, or could it be case if changing the phone? please help
Matthew Deakins

download and install Nokia's SMS Accellerator app
http://www.europe.nokia.com/A4149142
N80 Generic v4.0623.0.42, N80 Orange v4.0623.0.41, 6288 Generic v5.92, SE K750i

Similar Messages

I have poor/no service on my iphone 6 in places that I do have service on my old iphone 5. Takes 10 minutes to send text and webpages will not load but load within seconds on the iphone 5 and forget making a phone call. How do i resolve this issue??

I have poor/no service on my iphone 6 in places that I do have service on my old iphone 5. Takes 10 minutes to send text and webpages will not load but load within seconds on the iphone 5 and forget making a phone call. How do i resolve this issue??

Hey kristiac,
Thanks for the question. If I understand correctly, you have no service on the iPhone. I would recommend that you read this article, it may be able to help the issue.
If you can't connect to a cellular network or cellular data - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

On launch Mail's first outgoing email takes 3 minutes to send.

Every time I launch Mail in Snow Leopard, the very first outgoing email takes FAR too long to get out. All the following emails seem to go out normally. This happens to all Mac's on my network that have upgraded to Snow Leopard. A friend running Tiger was able to send out his first email after launch immediately. Seems to be a Snow Leopard issue. All emails are going through the same SMTP server.
Anyone else have this issue and/or suggestions?

Hi Vertical Interactive & welcome to discussions...
Two things you can try...
1.) Use the Mailbox menu to rebuild your inbox
2.) Find the /Library/Preferences folder in your user/Home folder and then locate and delete this file:
com.apple.mail.plist
*Caution* - deleting the plist may clear your account settings so be sure to note those first in the event you are required to reconfigure, etc.

E70 Text messages take an age to send

Hi, I wonder if anyone can offer advice. Generally the E70 is pretty cool but It takes an age to send a text message and I cannot use the phone whilst it is sending. I have deleted all messages etc but no joy.
Any advice please?

the early N series had a problem like this, the solution was to download a programme from Nokia support pages for the appropriate handset
sms accelerator i think it was called, maybe there is the same for E70, i cant look as for some reason the only nokia web pages i can look at are the discussion pages, anyone else having a problem getting into nokia.co.uk etc?
Phones I've owned (not in any order) 8210 7100 3510 3510i 7650 9210Communicator 1600 3310 3330 3650 5110 6230 9500Communicator N70 N90 N91 N73(ME) N95

Mail for mac is taking about 5 minutes to send messages

Hi, this thing started about 3 or 4 days ago, i send a message through mail for mac application, and it takes about 5 minutes to send it (without attachments), it used to work beautifully before but not anymore, any ideas?

Backup IMMEDIATELY!!!! Your computer coould be dying, take it in to your local Apple Store or AASP immediately to be professionaly diagnosed.

Since loading Itunes update my Itunes takes about 3 to 4 minutes to load and then when it loads it freezes for about 3 minutes and then unfreezes. This happens with every restart. I've have deleted and reload four times but still get the same results. t

Question: I've have upadated to the latest Itunes software but since doing so I've have had nothing but problems and yes
I have unloaded and reloaded at least 4 times. Now when I try to open Itunes using the short cut on the desk top it takes about 4 minutes or longer for the Itunes to start and then it freezes for about another 2 to 3 mintues and then starts. This happen everytime I try to open Itunes now. I even deleted Itunes from my hard drive and put it on my SSD to see if it would work and still nothing. I've always been pretty good at sloving my problems. But this one has me stumped. Is there anyone who as had this problem that would be willing to help me out. Router25. P.S. It only happen with this one application of software. Everything else loads up fast. This comput is about 1-1/2 years old. Most people would love to have this computer. 9 out of 10. Please help me someone. I ready have a grey beard and it getting grayer.

Restore from backup. If the issue continues, restore as new.

Publication of the big-sized Enterprise projects from Project Professional 2013 to Project Server 2013 takes about 60+ minutes.

Dear Sirs,
I need your support over the following MS EPM 2013 issue:
Publication of the big-sized Enterprise projects from Project Professional 2013 to Project Server 2013 takes about 30+ minutes. We
need to reduce this total publication time down to acceptable working values 10+- minutes.
Environment information:
Single App Server (Virtual): 16 Gb RAM, x64 4xCPU, HDD > 50 GB free disk space, OS Windows Server 2012 Standard Edition x64 Service
Pack 1, MS SharePoint Server 2013 and MS Project Server 2013 with CU December 2013 (KB 2850024) applied.
Single RDBMS MS SQL Server (Virtual): 8 Gb RAM, x64 4xCPU, HDD > 200 GB free space, OS Windows Server 2012 Standard Edition x64 Service
Pack 1, MS SQL Server 2012 x64 SP 1 Enterprise Edition.
We have 1Gbit LAN between APP, DB server and 1Gbit LAN between APP and Proj Prof Client.
Yes, we are on the way of migrating to the Prod environment
with 3-tiered architecture (with SP1 slipstream and CU December 2014 applied), but this issue also
presents there.
Project’s file information:
Tasks in the file: [~4900], resources in the file [~396] enterprise task’s custom fields used in the file [~23].
Project save procedure for this new project would last about 7 minutes. Project publication would last about 47 minutes. We noticed that
tasks synchronization process took about 1 second for each ~2,5 tasks, to add them to the sharepoint tasks list. So for all 5148 tasks it took about 5148/3/60 = 34 minutes. Other 13 min was used for reporting database publication and other tasks relevant
for new sharepoint site creation.
Case 1: Issue description:
During the Enterprise project’s file save and publication we have the following sharepoint 2013 log messages:
07.31.2014 12:43:17.22 Microsoft.Office.Project.Server (0x0358) 0x3D5C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope
(Persisting list changes). performing time =376.068676326181 22dca99c-4696-70f1-e9e2-06851d0bcffd
07.31.2014 12:43:17.69 Microsoft.Office.Project.Server (0x0358) 0x3D5C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope
(Persisting list changes). performing time =361.652807828928 22dca99c-4696-70f1-e9e2-06851d0bcffd
It shows that sharepoint spend at least ~350 milliseconds (or 0,35 sec*4900 tasks = 1715 sec, or 28,5 min) for each task update during
project publication. And we also have another log file that shows that about 0,7 sec (or 0,7 sec*4900 tasks = 3430 sec, or 57 min) sharepoint spend for save each task in project file to project server. So total save and publication time more then 60+ minutes
for that project file. The same result we have even if user didn’t do any changes at the project file.
We use only enterprise projects (dbo.MSP_EpmProject_UserView.projectvisibilitymode = «False»), and do not use sharepoint tasks lists,
but the synchronization between MSP Plan and SharePoint tasks list works at any case.
Case 2: Issue description:
- For the second test we created a new project with new sharepoint project’s site on basis of our «issue» project, with total amount
of tasks in it of 5148 (yes, we increased the tasks list default limit at the sharepoint site up to 6000 items in it – standard limits for sharepoint view list – 5000 items).
- Project save procedure for this new project would last about 7 minutes. Project publication would last about 47 minutes. We noticed
that tasks synchronization process took about 1 second for each ~2,5 tasks, to add them to the sharepoint tasks list. So for all 5148 tasks it took about 5148/3/60 = 34 minutes. Other 13 min was used for reporting database publication and other tasks
relevant for new sharepoint site creation.
-Then we deleted the
tasks list for that new test project from the sharepoint site and republish the project plan one more time. This time project save procedure took about 7 minutes, project publication about 2 minutes and 3 minutes for other relevant queue jobs. So total time
is 12 minutes.
As a conclusion: yes, we have determined
the exact problem - during synchronization process (from Project Server to SharePoint) it perform copying all tasks and related data from Project to SharePoint in spite of fact that you changed only ONE task or ALL of them. At any case, synchronization will
copy ALL of them from Project Server to SharePOint task’s list.
Our workaround is to disable the task’s synchronization for such big-sized project plans:
– to delete the SharePoint «tasks» list at the SharePoint site tied with project plan.
- or deattach the SharePoint site from the project plan.
Thank you for reading this topic, please if you also forced with such issue provide us any known workaround or maybe any official response
\ feedback from MS about it.
Thank you in advance,
Best Regards, Andrey

Regarding my topic, I also said that every time when sync works it updates All items from project’s plan at Project Server to corresponded task’s list at SharePOint server. Inspire of the fact that you changed only One task or group /
all of them at your project’s plan.
And it seems to me and my colleagues that it’s probably (maybe) a “bug” at the product. Here is what we have if looked a little bit closer to the code:
Share Point determines what task to sync from Project’s plan to sharepoint list. To do that sharepoint needs to know was that task changed or not, based on the following fileds (check SQL stored procedure “[MSP_READ_TASKS_FOR_SYNCRONIZATION]”):
TASK_UID    TASK_NAME    TASK_START_DATE    TASK_FINISH_DATE    TASK_PCT_COMP    TASK_PARENT_UID    TASK_OUTLINE_NUM
WSS_LISTITEM_UID   TASK_ID    TASK_IS_ACTIVE
We noticed that at any case synchronization performs for all tasks, EXCEPT the ROOT one. Then we looked at the comparison of TASK_PARENT_UID field. So sharepoint compares TASK_PARENT_UID with ParentID (this is internal name for lookup
field “Tasks” at the Sharepoint, and it stores their values at the format "ID;#Title").
And comparison performs like following:
SharePoint looks for Task at the Tasks’s list corresponded to Project’s plan with ID represented at the TASK_PARENT_UID field. Then it takes SharePoint ListItem ID (“int” type) and store it to the “num” parameter;
num = this.GetCachedListItemByUniqueId(listItem.ParentList, nullable.Value).ID;
2.Then it compares “num” with task’s “ParentID” at SharePOint as follow with operator “!=”:
((SPItem) listItem)["ParentID"] != (System.ValueType) num
3. If comparison was success (true) – then it tell us that values (at the Project’s plan for tasks) was changed, then it need to be synchronized. Corresponded Method setup “true” flag, and then returns it.
The “bug” is that this expression at the Step 2 will always return “true”, because in fact it compares “string” (see above – that this is lookup field at SharePoint side)
with “number”. For example if the parant task ID is “55”, then we get:
"55;#Task 1" != 55
And by the rules of .Net the “string” will never equal “number”
Furthermore this is approved by the SharePoint logs:
In that case we always get the note “Setting ParentID to” at the logs (we see it if turns on Verbose for “Project Server” -> “Sharepoint Integration” category).
So at any case of publishing project’s plan we always get that note at the logs for tasks that have Parent task, and we have Parent for all of them EXCEPT the ROOT one, exact logs represented further:
10/15/2014 02:37:32.26    Microsoft.Office.Project.Server (0x07D8)    0x06E8    Project Server    Sharepoint Integration    ado0d
Verbose    Setting ParentID to 1    bf2fc29c-7727-b00d-fa4a-34f22ea9ec1d 10/15/2014 02:37:32.62    Microsoft.Office.Project.Server (0x07D8)    0x06E8
Project Server    Sharepoint Integration    ado0d    Verbose
Setting ParentID to 1    bf2fc29c-7727-b00d-fa4a-34f22ea9ec1d 10/15/2014 02:37:32.63    Microsoft.Office.Project.Server (0x07D8)    0x06E8    Project Server
Sharepoint Integration    ado0d    Verbose
Setting ParentID to 1    bf2fc29c-7727-b00d-fa4a-34f22ea9ec1d 10/15/2014 02:37:32.67    Microsoft.Office.Project.Server (0x07D8)    0x06E8    Project Server
Sharepoint Integration    ado0d    Verbose
Setting ParentID to 1    bf2fc29c-7727-b00d-fa4a-34f22ea9ec1d 10/15/2014 02:37:32.69    Microsoft.Office.Project.Server (0x07D8)    0x06E8    Project Server
Sharepoint Integration    ado0d    Verbose
Setting ParentID to 5    bf2fc29c-7727-b00d-fa4a-34f22ea9ec1d
The following is the complete Method’s code from the corresponded reflector:
private bool UpdateParentID(DataSet taskDS, DataRow row, SPListItem listItem, Dictionary<Guid, SPListItem> redoEntries)
bool flag = false;
int index = taskDS.Tables[0].DefaultView.Find((object) DataRowExtensions.Field<Guid>(row, "TASK_PARENT_UID"));
if (index >= 0)
Guid? nullable = DataRowExtensions.Field<Guid?>(taskDS.Tables[0].DefaultView[index].Row, "WSS_LISTITEM_UID");
int num = -1;
if (listItem.Fields.ContainsField("ParentID"))
if (nullable.HasValue)
try
// STEP 1
num = this.GetCachedListItemByUniqueId(listItem.ParentList, nullable.Value).ID;
catch (ArgumentException ex)
if (redoEntries != null)
if (!redoEntries.ContainsKey(DataRowExtensions.Field<Guid>(row, "TASK_UID")))
redoEntries.Add(DataRowExtensions.Field<Guid>(row, "TASK_UID"), listItem);
//STEP 2
if (num != -1 && ((SPItem) listItem)["ParentID"] != (System.ValueType) num)
((SPItem) listItem)["ParentID"] = (object) num;
ULS.SendTraceTag(845443U, (ULSCatBase) ULSCat.msoulscat_PS_ProjectSharepointIntegration, ULSTraceLevel.Verbose, "Setting ParentID to {0}", new object[1]
((SPItem) listItem)["ParentID"]
//STEP 3
flag = true;
else if (((SPItem) listItem)["ParentID"] != null)
((SPItem) listItem)["ParentID"] = (object) null;
ULS.SendTraceTag(2495056U, (ULSCatBase) ULSCat.msoulscat_PS_ProjectSharepointIntegration, ULSTraceLevel.Verbose, "Resetting ParentID to null");
flag = true;
return flag;
Any thoughts about it would be much appreciated!

I recently installed MacKeeper on my iMac. It was a disaster. I lost applications and files. Fortunately I had back up. Worst of all it did something to my system software that it takes about 7 minuts to stat-up. What can I do to get it to start-up f

Version:1.0 StartHTML:0000000186 EndHTML:0000002354 StartFragment:0000001670 EndFragment:0000002318 SourceURL:file:///Users/armandodiaz/Desktop/I%20recently%20installed%20MacK.doc
I recently installed MacKeeper on my iMac. It was a disaster. I lost applications and files. Fortunately I had back up. Worst of all it did something to my system software that it takes about 7 minuts to stat-up. What can I do to get it to start-up faster?
Thanks

How to Remove MacKeeper
Given you have a backup you may want to think about erasing the hard drive and reinstalling Snow Leopard then restore your backup.

F4 Input Help in Variable Screen takes about 30 Minutes to display.

Hello Experts,
We have a web-report in which the time taken to display all the entries in F4 Input Help of the variable screen takes about 30 minutes. Have anyone experienced so long a wait time while accessing F4 Input Help in the variable screen and is there anything that we can do to reduce this wait time.
Thanks
Arvind

For BEx Web 7.0 make sure you have the attributes suppressed in help with the instructions from note below:
https://service.sap.com/sap/support/notes/1144979
Also apply the optimizations provided in the notes below:
https://service.sap.com/sap/support/notes/1374724
https://service.sap.com/sap/support/notes/1379804
https://service.sap.com/sap/support/notes/1266510
Also you could try changing the read mode of the F4 help depending on the size of the cube and MD tables.

When i send email with 2 account 3G and wi-fi it take 15 minutes help

when i send email with 2 account 3G and wi-fi it take 15 minutes help

Welcome to Apple Support Communities.
It's probably quite simple, and nothing to do with your Address Book group.
It is a matter of 'junk mail' or 'spam' filtering on the recipient end, I think.
1. Apparently not everyone in your Address Book group (12 of 15 apparently?) has your current email address among their 'permitted email addresses', so, your original email message ends up in their 'junk mail' or 'spam filter' or whatever it is called by their email provider. Some businesses and schools also filter incoming messages for subject, language, content, or by sender's address (one company I dealt with prohibited all incoming email from Hotmail, for example), so it could be filtered at that level. In that case, the recipient might have to specifically ask the IT department to add your email address to a 'permitted' list.
2. When someone else in the group hits 'reply all', THEIR email address IS among the 'permitted email addresses' for everyone else, and they are in effect 'forwarding' your message from their email address, so the filtering affecting your email address does not affect their re-sending of your message.

Strange: suddenly logic takes about ten minutes to start!

hi!
some hours ago I worked on a logic film underscore project. so i had a quicktime movie loaded in my project.
then I opened the final cut project from which the movie was from. I don't remember if I closed the logic project before, but the actual movie file was just a bounce, not used by both of the apps.
when I tried to open the logic project later it seemed to stop doing anything just after closing the startup screen, so I thought there was a problem with final cut causing logic to crash.
As final cut always takes "hours" to check the waves plugins on every booting, I always swich between special logic- and fcp- sets in "AudioUnit Manager", a tool to have different configs of AUs for different apps or so. Never had any problem for years with that.
So I tried everything with the AU plugins. nothing.
Then I renewed logic's prefs and all that stuff. nothing. then I installed the new pro application support. HEEY! it worked again. but just for a while.
opening other (even small) projects still takes about ten minutes now. nice coffee pause..:-) but I can't drink that much coffee at night.
what can it be? a problem with the project manager?
any suggestion?
cheers
david
PPC Dual G5, 2,5 GHz Mac OS X (10.4.8) 2,5 GB RAM FW410

are you using sample base instruments in those projects a lot using exs or kontakt? when paths to samples get messed up for some reason it can result in along waiting times each time a project is loaded.
lately my kontakt samples get loaded without any sign of activity. if it is a large orchestral score i see a dead screen for quite a while before suddenly everything pops up and is ready to work with. i recall seeing progress bars or similar things in the past though...
repair permissions and defragging (idefrag) may help as well.
btw. i can drink as much coffee as i want late at night, even five minutes later i can sleep well. seems i am immune. but right now i am also having plenty of hardware issues to deal with so that's a good thing i guess...!

My iPhone 3GS on iOS 5.1 will randomly stop what I'm doing show a black screen then the spinning icon and then it shows my lockscreen. It takes about a minute to do this and it does it about 30 times a day. How do I fix this?

My iPhone 3GS on iOS 5.1 will randomly stop what I'm doing show a black screen then the spinning icon and then it shows my lockscreen. It takes about a minute to do this and it does it about 30 times a day. How do I fix this? It is EXTREMELY ANNOYING!

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

Once my iMac and Macbook Pro go to sleep and I start them it takes about one minute to connect to my wi-fi is there a setting change that would connect me immediately?

When my iMac, Macbook Pro, iPad and iPhone go to sleep it takes about one minute to connect to my wi-fi when they are awakened, is there a setting that will keep my wi-fi connected at all times?

http://www.macworld.co.uk/news/mac-software/mac-os-x-yosemite-wifi-airdrop-fix-u pdate-new-features-bugs-uk-video-10-10-2-3493748/
"Here's everything you need to know about Mac OS X Yosemite and the WiFi issues that are plaguing users, including a possible fix. Plus discover the new features that have arrived with OS X 10.10 and the fixes that arrived 10.10.2."
That fix was supposed to resolve the WiFi problems.

Start of Server takes about 60 minutes (every time)

Hi all,
Have a problem with NWCE. Every time i start the system it takes about 60 minutes until the system is up. I've tried different templates but the result is always the same.
My hardware:
Windows XP SP2
4 GB of RAM
IntelCore2 - 1,8 GHz
So what could be the problems?
Regards,
Daniel

Hi,
Open MMC and double click on database instance and login with control user and then start the remaining instances.it will take less time.
Go to services.mmc in your pc and manually start the database services.
Thanks and Regards,
gopal

When I start my iMac up it takes about 20 minutes to start

Hi since a few weeks, whenever I reboot my iMac it takes about 20 minutes before the login screen appears. Is it possible that a program called "daisydisk" has something to do with it?

Hello:
If you have some third-party software (translate daisydisk) installed, remove it. That is the first place to start.
Barry

My N80 takes about 3 minutes to send a text!!!

Similar Messages

Maybe you are looking for