My N95 Got a Serious After Updated to V12.0.013

After I updated my N95, it seem "funny".
The screen is not working good.
ie - flashing( changing colour to green, red, blue)
- screen theme is moving
- No respone when I hit any button on the keypad
Can I downgrade it to V11 ? How can I do it ?
Thanks

magiardi's right. Try re-flashing by using the Software Update again.
Run software update and then instead of showing you an update, it will ask you if you want to re-install the phone's software.
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

Similar Messages

My screen got totally white after updating to Yosemite

Uploaded the Yosemite to my IMac.
When installing the new update (running OS10.6.8 before) the computer restarted during installation.of program.
After that the screen is just totally white. What happened and what shall I do?

Thank you.
I’m writing from a PC at the moment.
Thanks for the answer. I can’t save anything now, the computer is ‘dead’ it is a shame on all I have on the computer.
And all this problems because of my banc who wanted my to update in order to put in a special identification program.
Who shall I blame?
I have to rebote my computer.
I am crying… ☹
Harriet
Från: Apple Support Communities Updates [email protected]
Skickat: den 17 februari 2015 22:44
Till: Aqua Produkter
Ämne: - My screen got totally white after updating to Yosemite
http://www.apple.com/support/assets/images/external/emails/logo.gif
You received a reply
Kappy<https://discussions.apple.com/people/Kappy?ac_cid=op123456> has replied to your question. You can view the full discussion<https://discussions.apple.com/message/27684871?ac_cid=op123456#27684871> in Apple Support Communities.
My screen got totally white after updating to Yosemite<https://discussions.apple.com/message/27684871?ac_cid=op123456#27684871>
Can you reboot the computer to Snow Leopard? If so, then re-run the Yosemite installer application. It should be in your Applications folder.
If you can't, then you need to erase the drive and reinstall Snow Leopard:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1<http://support.apple.com/kb/index?page=answerlink&url=http%3A%2F%2Fsupport.apple .com%2Fkb%2FDL1399&answerid=16777216&src=support_site.downloads.search>.
Correct Answer <https://discussions.apple.com/email/thread/6836494/correct/27684871> Helpful Answer <https://discussions.apple.com/email/thread/6836494/helpful/27684871>
Use the buttons above to tell Kappy and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to Kappy, go to the discussion<https://discussions.apple.com/message/27684871?ac_cid=op123456#27684871> in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile<https://discussions.apple.com/user-preferences!input.jspa>.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved<http://www.apple.com/legal/> | Privacy Policy<http://www.apple.com/legal/privacy/> | Terms of Use<https://discussions.apple.com/docs/DOC-5952> | Apple Support<http://www.apple.com/support/>

Mac got really slow after updation of os X and some application misbehaving and not able to open them.

Mac got really slow after updation of os X and some application misbehaving and not able to open them.

Apply the combo update
http://support.apple.com/kb/DL1640

Has anyone got slow browsers after updating to 10.8.4

In the last couple of days, both Safari and Firefox have shown very "jerky" performance - sometimes pages load very quickly, at other times loading stalls for a while and then restarts. With Safari, I get a spinning ball until the blockage clears itself. Running my ISP's (BTInternet) own speedtest when this stalling occurs, shows a speed near to dial-up whereas it should be near 30+Mb as I am on fibre. As soon as the stall clears, the speed reverts to normal.
CPU useage, memory, disc space etc are all normal, I have tried rebooting the modem and router, and changing from wifi to ethernet (via Powerline adapters) has no effect. This seems to have happened after updating to 10.8.4 but, given that everthing else seems to be working properly, I am reluctant to blame this, and suspect my ISP and/or its modem or router. Has anyone else noticed problems with their browsers since 10.8.4 and, if so, found a cure?

Give these a run through
..Step by Step to fix your Mac
I'm thinking the #12 OnyX cache cleaning routine is going to show the most improvment.
also check your browser plugins
https://www.mozilla.org/en-US/plugincheck/
Diagnosing network issues

Got speaker problem after updating my iphone 5 to ios8.02 my speaker isnt working

speaker issue after updating my i5 to ios 8.02 my speaker isnt working now big issue plz solve it asap

First, try to reset by holding the sleep and home button for about 10sec, until the Appel logo comes back again. You will not lose data by resetting.
If the problem persists, and to rule out a software problem, set it up as new device without using the latest backup afterwards. If the speaker is working, restore from the backup.
iOS: How to back up your data and set up your device as a new device
If the speaker is still not working after that, you'll have to get it checked, this might be a hardware problem.
iPhone - Contact Support - Apple Support

Got developers Apps after update.

Hi, After updating my N8 to belle i can see some of the applications which are for development purpose i guess. The apps are 360, Power monitor and crash report. Power monitor and crash report is available under folder RnD.
I have attached the screen shot for the same "apps.jpg".
Could you please suggest how can i remove this applications?
Thanks,
Luv
Attachments:
apps.jpg ‏38 KB

That's a bit odd but
Settings > accounts > google (add your gmail account) > open the playstore > download any app > give it some time it might start downloading all your apps if not you can
either
1) look for all the apps from your phone
or
2) on your computer sign in to the playstore and send the apps to your phone (playstore > sign in > my apps > install )
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

My Macbook air got very warm after update to mountain lion?

The macbook got very fast very warm.

Then do this:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Download and install OS X Mountain Lion Update v10.8.3 (Combo).

Ipad 3 wifi got gim/greyed after update to 6.1.2

My Ipad 3 got greyed after 6.1.2 update.. Is this some kind of normal problem for Apple products?

Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
 Cheers, Tom

N95, lost most languages after update

I had about 7 or more languages before the update and now I have only 3. I lost my native language in the phone. why?

Hi piccolo
The software version delivered by Nokia Software Updater is determined by the "seven digit" product code on label under the battery. Unless the product code has been amended, this should deliver the language pack related to the country of first point of sale.
Happy to have helped forum in a small way with a Support Ratio = 37.0

N96 Problem after update to v12

Hi , after i update my n96 to latest v12 , i got just 1 problem , and the problem is , when i open the gallery photo my picture quality not the good as v10 (first firmware).
it's like my images , (camera images and other images in phone) , not loaded full , it's like image quality is 80%.
Please help me. just 1 other thing , if i landscape the phone , problem solve . what can i do?

Ok here's the scoop.
In V10 the thumbnails only showed the high quality version but it took much longer to generate so the CPU was busy longer creating slowdown when you loaded a lot of pictures and then tried to use the phone.
In V12 a new approach seems to be taken where the thumbnails are generated in very low rez until you stay in the focus of a picture for a few seconds then it generates the high rez thumbnail. This speeds up the process of generating the first set of thumbnails and thus speeds up the phone when you just loaded a few hundred pictures.
So it's a good trade-off IMHO.
640K Should be enough for everybody
El_Loco Nokia Video Blog

After updating to latest Firefox - when I click on google taskbar my CPU usage goes to 100% and stays there... and computer is really slow. No other search engine show the 100% usage like Google. There was NOT a problem with older versions of Firefox...?

My computer got really slow after updating to latest version of Firefox. I checked all processes and I was testing the system. THe CPU usage goes between 2 and 70 percent staying around 25% on average, when I check my e-mail. As soon as I click on Google taskbar (without even typing in anything) the CPU usage jumps to 100% and STAYS at 100 %, and computer extremely slow.

My computer got really slow after updating to latest version of Firefox. I checked all processes and I was testing the system. THe CPU usage goes between 2 and 70 percent staying around 25% on average, when I check my e-mail. As soon as I click on Google taskbar (without even typing in anything) the CPU usage jumps to 100% and STAYS at 100 %, and computer extremely slow.

After update my Q10

hello friends, i am from india. there is no issue after update my Q10 to 10.2.0.424 . I got priority hub after update.
thank you blackberry.

I agree, great new addition. You're the not the only big fan of it.
If my post has helped you, give it a LIKE

Plz plz help nokia 5233 half display after update

i,ve nokia 5233 update in my mobile device with GPRS internet software version v21.1.004(7mb file)and it got half display after updaTE…
any soloution for that.. i update with latest version….
i also try with Nokia Software Updater in my pc and update again software version v21.1.004(120 mb file).
i also try set format(green button+red button+cemera button+set on) but problem is any budy ve any idea so plz
i also try fectory reset.but prob is still.any budy ve any idea so plz plz .
Solved!
Go to Solution.

There have been reported some issues with the 5800 similar to yours, and it seems that the devices affected were devices where the enduser had changed the screen to an non-official one, and after the update the screen was not working like it should.
If you have done a non-official warranty voiding screen change to your device (yourself that would mean), youre for your self.
If that isn't the case, I'm sure it isn't, you will have to seek help at a Nokia care point if you've already done what you've written. The hard reset should wipe your phone memory and set your phone back to "basics". - No need of doing the factory reset move after doing a hard reset as it does less than the hard reset and nothing that the hard reset hasn't done.
Now it seems like you've updated through ota first and then tried to reinstall the fw again. then done a hard reset? - You will need to take it to a Nokia care point as there nothing more we can do for you.
There could be a hardware issue which has just occured at the same time doing the update.
Clicking the "contact us" tab at the top right of this page will lead you to the nearest care point!
Cheers!

After update N95 8gb i got big problems.

I make a backup of all but not the 8gb-memory, and restured all after upate, and everyting seems to work fine.
First problem; i see now i have no 3g 3 (no connection) competely dead, i can not use the phone to communicate.
Strange everything work fine after update yesterday and this morning, something happen when it was in the locker at work.
And now i can't use Maploader, it say i have no memorycard, i understand that problem, i delete the whole Cities-folder this morning, because i dont need Nokia GPS-program Wayfinder anymoore, i choose Nav4all instead, i try the maploader only to for testing, i don't want to download any maps.
I test maploader now only bacause my phone is completely dead in communication, try to find out why.
I check in Nokia Nseries PC Suit everything on PC & mobil are the latest update.
I have another mobile SE M600i with 3g 3-cashcard, i by that cashcard only to enable the phone to start, not for communication, that mobile have full 3g (and probably work fine).
Was it the thing that i delete the Cities-map, no it can't be, because i use the N95 8gb and it work fine after that.
after work i even have a missed call on that mobile, but i can't call back, it's dead in communication now.
Strange things happens now.
Kjell O

15-Apr-2008 11:48 PM
kjello wrote:
Where can i change networksettings, all settings i find is; 3, tre, tre(01), tremms, tremms(01)
Is your phone in another language? You should normally see 2 or 3 options.
1. Dual Mode
2. UMTS
3. GSM
Maybe you could try reseting the phone if nothing else works.
Always remember to backup your phone before performing resets as your data may be lost.
Try these
*#7780# - Restore factory settings - resets all the settings to the default
*#7370# - Reformat your phone

Serious performance problems after updating from 10.5.6 to 10.5.7

I've got a Macbook Pro C2D 15" (late 2006). After updating the system from 10.5.6 to 10.5.7 and quicktime to 7.6.2, I experience serious performance problems which I have never seen before:
-From time to time, kernel_task has peaks in activity monitor (consumes a lot of CPU). In that moment, the mouse hangs for a short moment and audio playback is distorted/has drop outs.
-Recording audio consumes a lot of CPU (independent of the audio application).
-Video playback consumes a lot of CPU, regardless if I use VLC or the quicktime player.
Any idea what could be done? Thanks in advance.

After a few days of using CoolBook I report that my 1st generation MacBook Air is now reliable and never overheating, regardless of environment conditions.
I must point out that I do believe that it really is something new in 10.5.7 that is causing this problem as my environmental conditions have not changed and even Summer in Dublin still sees temperatures no more than 72F/22C. I am now in Madrid, where the environment is quite different, and I am still having no problem with kernel_task spinning.
I plan on reporting my problem to Apple anyway and being aggressive about the issue as MacLovinRanga did in this thread (http://discussions.apple.com/thread.jspa?messageID=9647353#9647353). Perhaps many/all of those of us having this problem will obtain new MacBook Airs.
Joe Kiniry

My N95 Got a Serious After Updated to V12.0.013

Similar Messages

Maybe you are looking for