My N95 region was changed after the NSU Upgrade

Hi folks
I used to have this N95 configuration Nokia N95 v10.0.0.18 15-03-07 RM-159 (05.01). Note that I had Bulgarian language in the languages. After the update I have V 11.0.0.26 17-04-07 RM-159 Nokia N95 (66.01) and no more Bulgarian ?!?!?
Any idea how to fix this
Lumia 920 OS version: 8.0.10521.155
FW revision number: 3047.0000.1326.2002

m8,
i think that's an updater issue! this is what happened to me, i download the software updater from Ireland, & then try to upgrade my N91-2 firmware it says there's no upgrade yet for my phone though i knew there was! what i did was to download the updater from southeast asian region(i bought the phone in HK during my travel there)& run it, voila i do have an upgrade & upgrade my phone firmware. it took more than an hour on a 128k dsl line!
since English language always on any region i guess i have no problem but there is support for other east asian language which i don't care!
this is a long shot, try to download a new software updater from your region, & give it a second go.Message Edited by android on 14-May-200709:03 AM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

I recently upgraded from Leopard to Snow Leopard and I noticed that I have more capacity available on the Macintosh HD. I checked my files and applications and they are still on my computer. Can capacity on the HD change after an OS upgrade?

I recently upgraded from Leopard to Snow Leopard on my MacBook and I noticed that I have more capacity on the Macintosh HD than before the upgrade. I checked my files and applications and they are still on my computer and nothing appears to be missing. Before the upgrade I had around 111 GB capacity with around 10.50 GB available on the Mac HD but now after the upgrade I have 119 GB capacity and 20.92 GB available. Can capacity on the HD change after an OS upgrade?

No, but the upgrade removed unneeded PowerPC code and changed the way free space is determined.
(72071)

Service entry Sheet was reversed after the invoice as posted and rebooked

Hi..
Service entry sheet was reversed after the invoice as posted and rebooked with final entry marked. The rebook transaction created a different $ amount than the original SES. The difference between the 2 amounts is causing a GRIR out of balance on the PO. MR11 does not indicate a GRIR out of balance.
why did SES rebook a different value?
How can we clean up the GRIR out of balance?
Please help...
Mercy

This is a standard SAP procedure.
SAP Note 440942 is helpful to sort this out.
Thanks,
Mercy

HT1316 How do i find the pin code change after the latest update?

How do i find the pin code change after the latest update? The IOS changed the order of things now

There are two things you should be talking about here. If its the Passcode, then this article may help you. (Pretty much restore your device) http://support.apple.com/kb/ht1212 If it's asking for a SIM PIN, then thats covered here. http://support.apple.com/kb/ht1316 Hope this helps!

I want to download apps on another laptop but it says download trial, this is putting me off as i don't want 2 DD, unless it changes after the download?

i want to download apps on another laptop but it says download trial, this is putting me off as i don't want 2 DD, unless it changes after the download?

Elaine_123 please make sure that you are signed into the Creative Cloud Desktop application utilizing the Adobe ID tied to your Membership. If you have done this then please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html to resolve the connection error preventing your membership from being validated.

My iphone doesn't recognize the user ID that the itunes account on my computer recognizes. It was changed on the computer because the original user ID email address is no longer valid

My ipone doesn't recognize the user ID that the itunes account on my computer recognizes. It was changed on the computer because the original user ID email address is no longer valid. Can someone please help me with this? Thanks!

Hi there,
Thanks for the reply. I did think that could be the case but then other books would also show up as apps on phone but not counted as an app. Maybe book apps downloaded from the app store work in this way whereas books bought from the ibooks app show in ibooks and not as apps.
I guess that would make sense, it must be because they are books but downloaded from the app store rather than the book store so they are visible as an app but don't actually get counted as an app.
Would you think that's the case too?
Thanks
Adam

Adding reminders to my calendar items is no longer an option after the software upgrade. I also can't get to day and week view, only month view. What's a possible solution?

Adding reminders to my calendar items is no longer an option after the software upgrade. I also can't get to day and week view, only month view. What's a possible solution? I'm using Andriod version 4.4.2 with kernal 3.4.0.

@MaloneTP
Thanks for keeping me updated! Do you see the screen options displayed in the following link: http://bit.ly/T2koBL for changing the calendar view options in Kies Air? Also, let me know if you're able to add a Reminder by following these steps: http://bit.ly/T2l9dY. Keep me posted. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

AIA 2.0.1 O2B Order synchronization fails after the SOA Upgrade to 10.1.3.4

Hi,
I have the AIA 2.0.1 installed on the system with the Order to Bill PIP flow working fine until I upgraded the SOA Suite from 10.1.3.3 to 10.1.3.4.
After the SOA upgrade the order synchronization from CRM(8.1.1) to BRM(7.3) fails with the error message
"exception on JaxRpc invoke: HTTP transport error: java.net.MalformedURLException: no protocol: eis/BRM"
I have checked the Application Server for the availability of BRM Adapter.
The BRM Adapter is available and properly configured. The JNDI Location for the BRM Adpater is eis/BRM itself.
Can anyone please help resolve this issue.
Thanks in Advance

Don't upgrade your Leopard clients. While running Xsan 1.4.2 on G5 Xserves running 10.4.11 works, it is preferred to keep your server running a newer OS than the clients. Again, Mac OS X 10.5.2 does work with Xsan 1.4.2 and MDCs running 10.4.11 but who knows if an upgrade will break this? Alternatively you could buy a couple seats of Xsan 2 and change your controllers to be newer intel Macs (Mac Pro or Xserve).

My iPhone 4 has become dead slow after the iOS upgrade. Any pointers pls?

Hello All,
My iPhone 4 has become dead slow after the iOS upgrade. I use the phone for business purpose and it has become painful to use the phone becuase of the poor performance.
I don't want to change phones based on iOS releases. Any suggestions would be appreciated.
Thanks,
Amrit

How to update my iPhone4,iOS 7.0.6

Adding a new contact anymore after the IOS5 upgrade!

I can not add a new contact anymore after the IOS5 upgrade - the " + " sign is gone? - how can this be fixed?

I think cpohlink has made a good observation. The same issue- no plus sign- is showing up in both calanders and contacts for some people. I have the plus sign on both apps, and do not have the problem at all. So what is the difference?
I have i cloud turned off for everything but find my phone. And i am not synced to any external calander or contact list except my phone.
Change your cloud settings to off, and see if that does it. Also, think about what other clalanders/ contact lists you might be syncing with. If they ae considered the 'master' then that may make the pad pad a slave, and unable to add entries.
Related question, can you edit entries, or is that blocked as well?

OWB considerations after the db upgrade

We did out of place db upgrade (moving to new oracle home) from 11.2.0.3.4 to 11.2.0.3.5. are there any special
considerations needed for the OWB during or after the db upgrade?
1225254.1 docs describes steps needed for owb for db upgrade from 11.2.0.2-> 11.2.0.3,
but I don't see any docs from 11.2.0.3.x to 11.2.0.3.y.
Thanks for your time.

880674 wrote:
our os is Solaris
Basically we create new oracle home.Patch that oracle home with latest psu(jan 2013)then we
Move the database from the old oracle home to the new oracle home
It is not clear as to why you take this approach - it is not required - all you need to do is apply the PSU patch to the current home by following the instructions in the PSU patch README.
1.log in as Oracle
2.. oraenv
a.TS11
b.sss
i.shutdown immediate
c.cd $ORACLE_HOME/dbs
d.l TS11
e.cp TS11 $NEW_ORACLE_HOME/dbs
i.cd $ORACLE_HOME/network/admin
ii.vi listener.ora
1.edit the line for TS11 to listen for the new oracle home
2.lsnrctl reload
3.cp *.ora $NEW_ORACLE_HOME/network/admin
iii.vi /var/opt/oracle/oratab
iv.change the oracle home for TS11 to the new oracle home
3.log out
4.log in as oracle
a.set the oraenv to TS11
b.cd $ORACLE_HOME/rdbms/admin
c.sss
d.startup
[email protected] psu apply
f.@utlrp
in this process do we have to do anything special for owb
update wb_rt_service_nodes set SERVER_SIDE_HOME='/ora/SW/db/11.2.0.3.5';
update owbrtps set VALUE='/ora/SW/db/11.2.0.3.5';I do not have any experience with OWB, but pl see if these MOS Docs can help
How to Change The OWB Home on the Same Server [ID 968712.1]
How To Update Warehouse Builder After A Database Cloning [ID 434272.1]
HTH
Srini

Problems with opening iBA books after the recent upgrade.

How many folks have had problems opening .iba books after the recent upgrade??
I did ! I completed and delivered a free book which was No: 9 in series - all the others opened OK in iBA after the upgrade except this last one.
I read the forum, none of the offered solutions worked for me.
I contacted support and was eventually asked to upload to there server the original .iba file which I did a few days back.
Today I had a reply to advise they had found and corrected the probem and gave me server access info to download a revised file.
The problem turned out to be the "Intro Media" I had dropped an image and not a video, which I have done before without probelms.
Apple support have removed it and the book file opens OK.
I dont know if this will help others who had problems opening files in iBA after the update.
It does seem as though the delivery of content acceptance critera is getting tighter or maybe its my own fault for doding the requirements!

Its seems like the application load may have not completed properly or there were some issues.
Backup all the data on your device then follow the below articles.
How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Manager for...
In the article below there is a section on how to restore selective data.
The databases you probably want to restore are:
Messages
Address book
Calendar
Tasks
Memo Pad
Content store
(Any others that you think you will want)
How to restore data to a BlackBerry smartphone from a backup file
Hope this helps.

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to X. any reasons why its doing that and how to fix it.

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to OS X. any reasons why its doing that and how to fix it.

Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reinstall OS X.

The license for Win10 after the last upgrade to 10049 is still valid up to April 15th and not to October 15th

I installed the first preview of Win10. Which would be valid for up to April 15th. After the last upgrade the preview screen shows build 10049. Valid up to October 15th. But Windows is not activated. I tried to activate. Response: wrong key. (...-9D6T9).I
tried to change the key with the new one given in the nowadays downloading pages (...-233PK) Response: this key is not valid for the version is installed. So do I have to download the whole setup again and reinstall it to my pc?

There are only 2 product keys..........
For Pro ( non-Enterprise ) version it is : NKJFK-GPHP7-G8C3J-P6JXR-HQRJR
For Enterprise version it is : PBHCJ-Q2NYD-2PX34-T2TD6-233PK
Look to the bottom right of the screen it tells you which version you have........

Weird problem after the last upgrade(10.4.8)

Hello all,
I am using a 1.66mhz MacMini with intelcoreduo. After the last upgrade
2weeks ago. I begun to encounter weird behaviors(those does not happen
all the time, but happens..) from my mac. I'll try to list those
behaviors below:
- trash can sometime can not empty, I have to open the thrashbin and
delete manaually by selecting each file to delete
-finder failing to open a new window.
- when i take screenshot, it only appears when i try to find it over spotlight
- and worst of them all, recent files downloaded on my desktop disappearing sometimes and only way to reach them ise search on finder, when spotlight finds it, it appears back again).
These are all so weird kinda behaviors. I am curious if any of you
having the same problems, or rather these problems has been allready
pointed.
Kind Regards,
alper,

I've seen some of those before but on a G4 Tower, so far never on my Intel Mac Mini.
I've seen screenshots not appear on the desktop until much later or when a new file is brought or created on the desktop. Likewise, I've seen the same behaviour with some files I've downloaded (to a specific downloads folder).
I remember stuffit 9 or 10 had a bug similar to this where when you expanded a an archive it was "empty" until you moved a new file into the folder or made a new file/folder in it, then it would show you the files that were actually in the expanded archive.
Try repairing your permissions and booting from your Mac OS X install disc and running disk repair.

My N95 region was changed after the NSU Upgrade

Similar Messages

Maybe you are looking for