MY N97 mini always searches for wifi when the scre...

This often happens when I unlock the touch screen (either by using the lock/unlock switch, or by slide out the keyboard). After the screen is lit, there pops up a window asking me to select a wifi network. If I press "cancel", it will do a wifi search again and asks me to select network again... This is quite annoying.
As there is no widget that needs internet access. I have also set "Show Wifi availability" to "Never".plz. help me

Did you check the connection settings for Nokia Messaging and MfE?

Similar Messages

When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi. It gives me a message unable to search for WiFi. Before the upgrade to Lion it worked fine. What gives?

When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi. It gives me a message unable to search for WiFi. Before the upgrade to Lion it worked fine. What gives?

Could there be a setting I need to adjust in the iPad2? When I try to turn on WiFi and enter the name of the WiFi that I have established, including the security type and the password, I get the message "Could not scan for wireless networks." Is there a setting in iCloud or other location that needs to be changed?

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT1695 How can i connect to a wifi with my Iphone 4s when it searches for wifi but never finds any signals anywhere available?

My Iphone 4s can not scan for wifi signals. My phone was jailbroken and it was working fine until one day, my phone began to have problems searching for wifi signals. It connected and took longer to do so, however the next day it didnt pick up any wifi what so ever. I tap settings>wifi>on> and its an endless search in places where there is wifi.I saddly lost my hard drive where i kept a back up for my iphone, so restoring it from a back up wont do. I plugged it in on another
computer which i had to set restore as a new phone. I did and i still hasn't worked, i am open to suggestions and the following i am aware of:
It hasnt been dropped
condensation/humidity (which i dont want it to be because it has been raining a lot and its never been wet)
Thank you in advance!

- Reset the iPod. Nothing is lost
Reset iPod: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Setting>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connection
What encryption our you using? Try changing the encryption, icluding using no encryption for test perposes.

Mac mini Server 10.6 unable to search for files on the server from desktop.

I'm running Mac mini Server 10.6 with 15 various Apple Mac desktops 10.4 / 10.6. The problem i'm having is that i'm unable to search for files on the server from any of the desktops. I have fixed permissions and rebooted. I can perfomr a search though command - F and spotlight from the server.
Anyone have any ideas?

I have a Mac mini server with Mac osx 10.6.8 installed --- I have a website {UNDER CONSTRUCTION} installed on it with a REGISTERED DOMAIN NAME belizeansworldwide.com -->[DNS service w/GoDaddy] & DSL INTERNET service w/VERIZON --- {My server is the ONLY DEVICE CONNECTED to my VERIZON DSL router/modem}
When I enter my DOMAIN NAME or WAN IP # in my browser(s)--> Chrome OR Safari -- i get my Verizon modem
set-up page-->{this incl the WAN IP# as I expected}----{NORMALLY I WOULD ACCESS MY Actiontec
modem/router via 192.168.1.1} --- While in that webpage there's an option "shared files/folders" & clicking on that option DISPLAYS MY WEBSITE ---> {"PORT FORWARDING DID NOT RESOLVE THAT"}
My next attempt @ a solution was through my Server's SystemPreference>Sharing>Internet Sharing
& this the Original Object of my post ===> "MY SHARING PANEL DOES NOT INCLUDE THE OPTION
FOR 'Internet Sharing' among the others like CD DVD, Remote Login,Remote Management, Bluetooth Sharing, etc.etc ---- Hope this additional info will help to clarify &/or explain my problem
Thanks, & best regards to you & yours

HT1414 When I search for stuff on the internet it says safari could not open the page because the server stopped responding and non of my games work either. What do I do to fix this?

When I search for stuff on the internet it says safari could not open the page because the server stopped responding and non of my games work either. What do I do to fix this?

Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network

LOV - Require User to always Search for Values option

Hi All,
I have build a Supervisor LOV,But when I click the LOV(Flash light Icon), the new LOV window opens and it fetches the entire list of Supervisors which takes lots of time and LOV times out in many of the cases.
I want the LOV window should open without bringing the entire list of suprevisor and let User enter some Name to be searched.
To achieve the same,I enabled the option
Require User to always Search for Values option
(Immediately Displays the Search Dialogue when LOV is exapnded)
But it is not working.
Is there a way to do it ??
Regards
Jujaar

Hi Tamir,
Thanks for you updates.
I dont think so,that I need to create a table or Materialised view.Cause I am taking the data from per_all_people_f directly.All the employees who are managers.
But I want that when users clicks on the LOV ,it should open and should force user to search for some employee .
As of now it fetches the entire list while opening up,when the user clicks on LOV button.
Thanks and Regards
Jujaar Singh

I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?

I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?

Once again, my thanks for your assistance. If I may impose on your generosity one more time, if I understand you correctly if I create a document on Word or WordPerfect, print it and scan it to create a pdf, the search function will not work. But, if I create the pdf document in Word the search function will work. Unfortunately, I am not sure how I create a pdf document in Word other than by printing it and scanning it. Could you please explain.
William B. Kohn, Esq.
General Counsel
Paul V. Profeta & Associates, Inc.
769 Northfield Avenue
Suite 250
West Orange, New Jersey 07052
(973) 325 - 1300
(973) 325 - 0376 (Facsimile)
[email protected]<mailto:[email protected]>

How can i remove the bar (where i search for websites) when i full screen for my macbook pro

how can i remove the bar (where i search for websites) when i full screen

ohhh k i got it but thats not what i am looking for, so when i full screen i want it to be like fully full screen like when i watch a movie i want nothing but the movie on the screen and when i bring the mouse up then the tab shows again thats what exactly I'm asking about.

Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that.

Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that. I took my old router upstairs and was streaming TV via my ipad seamlessly - the same program via the TC was constantly buffering.
I just expected to be able to plug in the TC, so a simple set-up and experience wireless both upstairs and downstairs in my house. For some reason the range is low and speed veru disappointing.
I am far from being an IT expert but I would welcome advice about setting up this TC so we can enjoy the product as it was designed. Please HELP!

No silver bullet........but my suggestions may drive you in the right direction.
1. Unplug the power cable from the TC and wait 10-15 minutes before powering back up.   Seriously wait!
      Proceed to #2 if this dosen't help.
2. Unplug the power cable from the TC, ubplug the power cable from your Broadband Modem (assuming it's a cable modem), disconnect ethernet, and cable from modem.
2a. Wait 10-15 minutes then re-connect cable, ethernet, and power back to modem (your modem should power up unless you have a power switch) wait for all the modem lights to come on EXCEPT activity.
2b. Connect ethernet from modem to TC, and plug in the power cable to TC.
      Proceed to #3 if this dosen't help.
3. Reconfigure the TC.........Read here........http://support.apple.com/kb/HT3728
All really simple to do....if you need additional help let me (us) know.

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

How do I stop Imovie from automatically searching for videos when I open up program. I can't do anything when this happens. I checked my pref and it's not set to automatically do this.

How do I stop Imovie from automatically searching for videos when I open the program. It will not allow me to do anything and I cannot start a new session.

N97 mini: folder setting for image gallery / photo...

Hi I've just got a simple question: is it possible to choose the images folder(s) which are shown in photobrowser or image gallery on a n97 mini?
now it shows all the images on my device/mass storage/sdhc card, and I don't want that to happen. I want to be able to choose the folders which are shown. now it also shows all icons of my pois inthere, so i've got over 400 images (all images which are used by programs) while there are only about 50 files in the images folder.
now i have to scroll through 350 images which i don't need, just to find 1 photo i want to use as a background.
hoping that there will be a software update which allows for changing these settings, so that it only shows the folders I want to use.
Solved!
Go to Solution.

You can use X-plore from "lonelycatgames" , to hide an entire folder, but those images are used by programs this would be of no use.
If you are interested to know how:
1ownload and install X-plore, their website, (trial works as good as full, with a just a splash screen at startup)
2: Open it, Create a folder any where on memory card. Or if you know the folders where "those 400" pictures reside, navigate to it.
3: click Options>file>attributes>and tick "Hidden" it'll ask "Do you want to edit attributes of all file in this folder?" click yes.
Now all the file in a particular folder are hidden, so they won't show up in gallery.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Recently when I search for things in the top right search bar in iTunes, the results show up but I cannot click on them. Any ideas on how to fix this?

Recently when I search for things in the top right search bar in iTunes, the results show up but I cannot click on them. Any ideas on how to fix this?

Go to this address: http://mycroft.mozdev.org/search-engines.html?country=AU
Item 24 lists 3 installable major search engines for Australia.
You can also restrict your search in Google by including ''country:au'' or ''location:au'' or ''city:perth'' (for example) in your search terms. Example: ''city:sydney plumbers'' in the Google search box will list plumbers in cities named sydney.

MY N97 mini always searches for wifi when the scre...

Similar Messages

Maybe you are looking for