My name in the email on the itouch..

When I use my gmail on the ipod touch, my name doesn't appear right. My last name is spelled wrong. How can I fix that ? It is only like that when I use ipod touch to email other people.. Does anyone know ?

Hi,
Go to - Settings > Mail, Contacts... > "your" Gmail Account.
Check and adjust your settings here, i.e. tap your name and correct it.
Then hit "<Mail" in the top left corner to exit.
Regards,
Dud.

Similar Messages

Mail running under LIon no longer grays out the name of the sender of an email that has been read. How can I get that to happen?

Under the old version of Mail, when an e-mail was read, the name of the sender was greted out so that I knew I had read that email. This does not seem to happen under the new Mail thaqt came with Lion. Help!?
Chuck Humphrey
[email protected]
303-997-2755

Kirk,
Thanks again for your suggestions. No, I don't get an
error message. In fact nothing happens. My name and
key are typed in and from what I understand, once you
do that with a real key it directs you to the
registration page. When I get done entering the
information the window just sits there without any
button or option to continue.
QT Pro is already in the QT (non-pro) you installed and the key (which is a hash of your name in part) allows the Pro features to work.
No redirect, internet, nothing like that. As such many people have activated and think they haven't. Just look at the menu items and see if the "Pro" logo is shown next to a few (which are greyed out and not available without Pro). If not you are done.

I lost my address book when I installed Mountain Lion and have not been able to recover it. WHen I type in a name in an email the address shows up, so I know it is in there. How can I restore my address book?

I don't know how to do this. I typed the question in the bar above, but apparently need to type it again here. I lost my entire address book when I installed Mountain Lion and have been unable to recover it. I know the information is in there as when I type in someone's name in an email the address always shows up right away. How can I find the information for my contacts and restore my address book? Do I need to go to the Apple Store that is 2 hours away and have an expert help me or can I find out how to do it online for free myself?

The auto-complete in Mail addresses comes from two sources: (1) The "Previous Recipients" list, which can be viewed via Mail > Window > Previous Recipients. (2) Your Address Book (now called "Contacts").
If you did in fact lose your Address Book - are you sure you don't have "Contacts" in your Applications Folder? - It sounds like you are getting addresses from source (1). If you did in fact lose your Address Book (now called "Contacts" !!), you will have to restore it from a backup.
charlie

HT4436 If someone else has set up an ICloud account (that uses his name in the email address) using my Apple ID, do I have to change my Apple ID to open an account with my name in the email address?

If someone else has set up an ICloud account using my email address and Apple ID but has chosen his name for the mail name, can I get rid of his name in the [email protected] and put mine in there? Or do I have to set up a whole new acount with a new Apple ID? Will I be able to do that with his name already linked to my email address?

How did he manage to do this? - he would have to have known your password if he was using an existing Apple ID. You should change it immediately to something strong and unguessable. That will prevent him accessing the account or using the email he has set up (assuming he hasn't changed the password and locked you out).
You can't change the primary @icloud.com address once set up, though you can create additional addresses as email aliases: if he's given this address out you will get his emails but you could set up a Rule to trash them.
You might to better to create a new ID and iCloud account anyway. To do this you wil need a different non-Apple email address (you could use a free GMail one); or you have the option in the iCloud prefs pane to choose an @icloud.com address and make that the ID.

Why is it that I can no longer access all of the people in my address book by typing their names in the address line of an email?

Until the last month or so I have always been able to type the first few letters of a persons name in the email address bar and his address would be entered. Now this only happens for those people that I have contacted recently. The really big problem is my group that contains 40+ people. I use it only once a month and do not want to type 40+ addresses.

I think that may be a javascript issue.
In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
'''about:config'''
# In the address bar, type "about:config" (with no quotes), and press Enter.
# Click "I'll be careful, I promise"
# In the search bar, search for "javascript.enabled" (with no quotes).
# Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
To Re-enable JavaScript, repeat these steps.
'''Add-ons'''
You can alternatively install an add-on that lets you disable JavaScript, such as
*[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
*[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
*[https://addons.mozilla.org/firefox/addon/settingsanity/ SettingSanity] (adds back removed options for JavaScript, Advanced JavaScript Settings, loading images, and showing the Tab Bar)
Thank you and I hope this helps!

I need to change my icloud account the account name is a email address I can no longer access

I need to change my icloud account name the account name is an email address that I can no longer access.
When I select the "red" Delete Account button it ask for my passcode for that account and I don't recall it.
I also cannot reset the password because I have no Idea what email it will go to. I have reset my apple ID and passcode it has the old
email now how do I change it for icloud????? Please assist very important...

Welcome to the Apple Community.
Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

How do I include the quiz taker's name in the Quiz Results email?

I'm using Adobe Captivate 4. I want to include the quiz taker's name in the Quiz Results email. Is there to do this?

My experience with Captivate is minimal. Once again, the version that I am using is Captivate 4. I am not using an LMS. When someone takes a quiz and submits it, the email that I receive only contains the quiz ID and the test results themselves. I would like to be able to have the results include the user's name or at least his/her email address. Is their something that I can do with a variable to accomplish this? Or, is their some sort of third party widget available?
Thanks Gene

How to print an email with the full name of the attachment ?

In Mail, when using "View as an Icon", the name of the attachment - if too long - does not appear in full. Any tip on how to have the full name appears (for archiving purpose) ? Thank you

Srinivas, Thanks for your quick reply.
This is smartform, and sending the output as pdf, except the the first page on which I have the text to be printed on the email body. In this email body text I have to display an email.
when user clicks on the email should open an outlook with the email id in the TO. Hope this helps.
Thank you,
Surya

Auto saving email attachments using date email received as the name of the attachment file

I would like to be able to batch save hundreds of email attachments in my inbox to a specified folder and use the date and time email was received as the name of the file. i found sample script that would give it timestamp but would prefer date and time of receipt. any help would be greatly appreciated.
thanks.

I found the below script online but it does not seem to be naming correctly. it appears that the month always defaults to 12. perhaps somehow could suggest a fix?
set theAttachmentPath to (path to desktop) as text
tell application "Mail"
          set a to selection
end tell
repeat with s in a
          tell application "Mail"
                    set current_date to date received of s
                    set CurrentSender to sender of s
          end tell
          set current_date to AppleScriptDateToString(current_date)
          tell application "Mail" to set Attached to mail attachments of s
          repeat with ThisAttach in Attached
                    tell application "Mail" to set FileName to name of ThisAttach
                    if FileName ends with ".pdf" then
                              set FileName to current_date & " from " & CurrentSender & ".pdf" as text
                              set FileName to checknamewith_pdfsuffix(FileName, theAttachmentPath, false)
                              tell application "Mail" to save ThisAttach in theAttachmentPath & (FileName)
                    end if
          end repeat
end repeat
on AppleScriptDateToString(a)
          set b to current date
          set monthnames to {}
          repeat with i from 1 to 12
                    set month of b to i
                    set monthnames to monthnames & {(month of b) as text}
          end repeat
          set Y to (year of b)
          set M to 0
          repeat with t in monthnames
                    set M to M + 1
                    if t as text = (month of b) as text then
                              exit repeat
                    end if
          end repeat
          set M to Twodigits(M)
          set D to Twodigits(day of b)
          set hh to Twodigits(hours of b)
          set mm to (minutes of b)
          set ss to Twodigits(seconds of b)
          return Y & "-" & M & "-" & D as text
end AppleScriptDateToString
on Twodigits(a)
          return (characters -2 through -1 of (("0" & a) as text)) as text
end Twodigits
on checknamewith_pdfsuffix(n, D, looped)
          tell application "Finder"
                    set thefiles to name of every item of (D as alias)
          end tell
          if thefiles contains n then
                    if looped = false then
                              set n to ((characters 1 through -5 of n) & " 1" & (characters -4 through -1 of n)) as text
checknamewith_pdfsuffix(n, D, true)
                    else
                              set tmp to (last word of ((characters 1 through -5 of n) as text) as integer)
                              set tmpcount to (count of characters of (tmp as text)) + 5
                              set tmp to tmp + 1
                              set n to ((characters 1 through (-1 * tmpcount) of n) & tmp & (characters -4 through -1 of n)) as text
checknamewith_pdfsuffix(n, D, true)
                    end if
          else
                    return n
          end if
end checknamewith_pdfsuffix

How to dynamically set the name of the generated PDF file sent by email

Hello,
I am using Reports 10g and I managed to send PDF reports by email, specifying the recipient, subject, format etc, using the reports servlet URL.
But there is one thing that I cannot find a way to do: I want to dynamically set the name of the attached file. It defaults to the name of the RDF file (eg monthly_sales.pdf). I would like it to be something more meaningful (eg monthly_sales_072010.pdf, where 072010 is the month and year passed by parameters).
Is it possible to do it?
Thanks
Luis

Use System.load(...) instead of System.loadLibrary(...).

Passing form field name to the subject line of the task assign email

Hello Everyone,
I am trying to create a process that need to pass one of the field data from a form to the task email assign but could not make it work right as expected. I think I miss something but could not figure it out myself. If any one has done this before, please share your knowledge.
Thanks in advance,
Han Dao

Hi Jasmin,
I thought it simple thing to do by passing the xPath to the subject line but for some reasons, it does not work instead it show the whole xpath on the subject line. Here is my xpath:
{$/process_data/FormData/object/data/xdp/datasets/data/FSFIELDS_/Form1936/EmpInfoSub/UserM gr$}
where Form1936 is the pageName, EmpInfoSub is sub-form, and UserMgr is field name on the form.
Thanks,
Han Dao

Changing the Sender's Name of an Email Address

Hello Experts
I am sending Emails from an Activity in the Interaction Center WinClient and is working good. The thing is that i don't want to display the name of the person that is sending the e-mail once the e-mail is sent.
For security reasons, i want to change the sender's name for a text.
For instance, if Jose Perez is sending the e-mail, i want change that for Solution Center. That way, when the customer receive the e-mail, he will see Solution Center and the e-mail address ('[email protected]) of the sender.
Can anyone help me solve this issue?
Points rewarded
Thanks

Hello Alberto,
In the function module SO_OBJECT_SEND, which is used to send e-mails, you can pass the parameter ORIGINATOR and ORIGINATOR_TYPE.
ORIGINATOR = the email address that will appear as 'From'
ORIGINATOR_TYPE = 'U' for internet e-mailadresses.
Hope this helps,
Kind regards,
Joost

When I send an email, a photo appears after my name in the sender line. How do I get rid of it?

When I send an email, a photo appears after my name in the sender line. How do I get rid of it?

I don't have a signature set up, but did a little research. Someone posted that these will show up when I send an email to myself, but will not show up when sent to another person. I sent a test email to a friend to check for sure.

How do I send an email with a group address and not show the addresses/names of the recipients?

How do I send an email with a group address and not show the addresses/names of the recipients?

Use BCC. That's blind carbon copy. And copy paste the address into the BCC field. It really depends what e-mail program you use how to enable BCC.

Changing the name of the form when attached to an email

Good Day All;
I am wondering if there is a way to change the name of an attachment when the email button is clicked.
Let me explain.
I have designed a form that will be emailed from one are to another and when the email button is clicked the email attachment is named (example) “_150s2140t32f8b0iu.pdf”. Of course this is a meaningless name. I would like to somehow change this to better represent the name of the form.
Thanks for any suggestions
Thanks
Chomp

Hi Chomp,
It sounds like you are clicking the email button when in Preview in LC Designer. When the form is being Previewed it is given a temporary name. If the form is opened in Acrobat directly, does the email button attached the form with the proper/full name?
If you want the form to be given a named based on user's inputted data, then you will need a trusted function (.js file) on every user's computer. See this discussion: http://forums.adobe.com/message/2266799#2266799.
Niall

Email PO - Has anyone configured the Company Name in the Subject Email?

Hi experts,
I have configured the following in the subject of the email for all of our PO's being sent via email.
PO &EKKO-EBELN& - &EKKO-BUKRS&
This shows the PO Number and the Company Code in the subject line. My clients do not want the Company Code to go into the subject becuase it is meaningless to our vendors / suppliers. I need to find out how I can add the company name into the subject.
NOTE: We have more than 1/2 dozen company names.
Thanks

hi
pass the company code to the company code table get the description and pass on to a local variable from there display in subject email.

My name in the email on the itouch..

Similar Messages

Maybe you are looking for