My nano 6 plays the same few dozen songs even though there are 1000 songs.
My nano 6 plays the same few dozen songs over and over even though there are about 1000 songs on it. Many of the songs have never even played.
Turn off repeat.
This is covered on page 29 of the manual:
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
Similar Messages
-
Playlist shuffle always plays the same few songs
I got a playlist that has roughly 250 songs. Everytime I connect my Ipod to charge it, then disconnect and start the playlist on shuffle mode, there's always a 20 to 30 songs playing first. If I close my Ipod and start the playlist again (still on it most of the time), it shows 1 of 250 and plays the same songs, but not in the same exact order (though sometimes it does for 2 or 3 songs). Just like if the shuffle was on "low" mode or something. It's still choose randomly some song here and there, but not that much since it the same few, ALL THE TIME for a while. The only way to get around this is to connect my Ipod to my computer again (it reset it somehow) or leave it open all the time so it knows wich song has been played (but that's terribly stupid). Is there any other way to go around that shuffling loop? I found myself skipping most of the time since I always hear the same few songs even though there's some songs in the playlist I've never ever played on the Ipod. Is there a way to set the "priority" (like play the most higher rated song first) or the "intensity" (from low to high) of the shuffle?
Got the last 7th gen. Ipod Nano.On the iPod's Now Playing screen, there is a Shuffle button. The symbol looks like two arrows crossing. Is that set to ON?
I ask this because shuffing a playlist should NOT always put the same 20-30 songs at the top of the list. Shuffle means a randomly ordered list is created and played. If the original playlist is in a somewhat random playlist order to begin with, playing it in play-in-order mode may seem like it is shuffling, even though the iPod is playing the list in playlist order. And the same songs would be at the top of the list every time, because the iPod not shuffling the list.
Sorry if that's too basic, but I need to ask the obvious question first, and that question is, IS is the iPod actually set to shuffle songs? -
my 6th generation nano plays the same song over and over even though the repeat is not on.
It sounds like the repeat setting has been enabled. See page 21 of your iPod's User Guide for instructions on turning it off.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock -
The preview of my hardcover book as iPhoto laid it out is 62 pgs. even though there are only 82 photos in my album.
The auto layout used mostly 1 photo, full pages. Obviosuly I can manually re-layout the pages as multi-photo pages and reduce the number of pages.
However, that seems like a lot of pgs. for so few photos since a blank Photo Essay book layout appears to use 73 photos?
I'm not sure I know why iPhoto did not the default layout to fill those photo frames. I expected the 82 photos to use approximately 23-24 pages max.
Is this a full 62 full pgs or 31sheets?
If it is a true 62 pages, what is the cost?
Thanks for the help.What does the book look like in iPhoto in the All Pages window? Are there photos on all pages? Books are printed on both sides of the page so that would be 31 pages.
This book has 48 pages or 24 sheets.
To find the cost click on the Buy Book button and check the price that is presented to you. You can always cancel out of the purchase process.
Happy Holidays -
After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
== This happened ==
Every time Firefox opened
== Upgrading to newer Firefox version (3.6.8)I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this? -
New Ringtones all export as same name and song even though they are diff?
Ive created ringtones via the rename to m4r method, and has been working fine. Ive got 3 that I created some months back , but this weekend I tried to add another 3. These created fine, and if copied to phone indiviudaly work fine.
However the moment I add more then 1 to my phone, all get labeled the same on my iphone and all play the same track. The tones I created a while back work fine, have tried various combinations of copying 1, 2 or 3 tones over but its only these new ones that are causing the problem.
Any one experience anything similar or have any advice?
thanksA couple of things to check.
Open itunes and connect the iphone to the computer
If the iphone is set to manually manage, uncheck the box to manually manage.
Go to the ringtones tab and uncheck sync ringtones checkbox.
Now click apply in the bottom right corner.
Once the sync is complete, check the box to sync ringtones to the iphone and choose all ringtones.
Click apply again to sync the ringtones to the iphone.
If the auto sync does not work, you might need to restore the iphone and set up as new iphone.
Here are a couple of articles from the apple support website that might help out.
http://docs.info.apple.com/article.html?artnum=305740
http://docs.info.apple.com/article.html?artnum=305744
Hope this helps. -
I have Lion 10.7.5 and it says that I still have 108 emails on one of my accounts (Microsoft outlook live) even though there aren't any email being shown. And when I try to access my account on the Outlook Web App, there aren't any emails there either. I've tried the rebuild function and it doesn't do anything...what's my next move?
Here, let me explain the way you use the word "crap" in a sentence like this, especially when I'm asking for help from a total stranger such as yourself. It's rude, obviously I know now not to do something like download something like that to my computer. It's not the difficult to figure out, and obviously I'm suffering the consequences for it now. So are you planning on helping me? Or should I not reply to your next reply if it has the word "crap" in it? I'm sure this whole discussion board was created to be used in a professional way, which is how I would like to keep my responses.
-
Music shuttle by without playing but a few tunes,Help!
)the maximum length of file name is 255 in the window.
the file name consists of <diectory location>+<file name>+extention...
go to the tool menu in CENTRALE.
minimize the file folder name: Default is <almum name>...... it's realy long, you know
minimize the file name: default is track name.... some times It's terribly long because it's taken from website..
I set the fileme option to <none>_<none> to avoid reundancy.
Make it less than 28 character total. ( 256 bytes really contain 28 characters in a high level language.
I don't know why the creative lab doesn't mention this somewhere...
For all kind of missing track(actually not missing, it is under other folder name)
If you edit the track info(track titles ,album name and artist track # in CENTRALE), all those will show again..this is hassels.
Or remove the incomplete album and rip again. -
I am trying to launch Firefox 9.0.1 on Windows 7 but it isnt working. I try to launch it and the application window does not show. When I look at the task manager and then look at the Applications tab, Firefox isnt listed. If I go to the Processes tab, there is a firefox.exe*32 process listed. Each time I double click the Firefox icon, a new firefox.exe process is spawned but there is never a visible instance of the Firefox application.
There are no errors in the application logs. I end up just having to kill the processes.
I tried launching in safe mode by holding down the shift button but the same thing happens.
Any suggestions on what to try? It has never worked since upgrading from version 8. I tried un-installing and re-installingI went through everything mentioned in the link you posed and nothing detailed there resolved the problem.
The Profile folder didnt exist so I created it. Made sure the perms were good and that it was not read only.
There are no default folders appearing under the profile folder when I start Firefox.
I have Firefox installed to my E drive.
Nothing happens. The process appears in the task manager but no application shows up.
Cant start it in safe mode, cant run the profile manager. -
My Desk top recenntly had a new hard drive installed. I a m trying to move music from my IPhone (4s) to my itunes account which house all of my music previously. Itune will only let me move purchased songs. Can you move all of your music from phone to pc? If so How?
http://www.wideanglesoftware.com/touchcopy/index.php
-
ipad showing that 1.2 GB of storage is being used, yet I have cleared all the messages out of all of the mail boxes lokking for help on how to correct this problem
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwnhttp://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
Cheers, Tom -
I have been looking forward to an improvement to iPhoto but have found Photos to be worse than useless, unfortunately. It uses all my resources, crashes and freezes constantly. Not only that, the events/albums/categories I have spent countless hours sorting have been completely eliminated. Without this, the app is of no use to me. So, fine, I'll revert to iPhoto, but a ton of my photos are now missing. It shouldn't be a big deal, because I use Time Machine regularly, but Time Machine won't let me restore any time past the date I installed the OS update (the backups are there). Any suggestions?
Your Time Machine backup lets you go back to directly the moment after you upgraded to MacOS X 10.10.3? There must have been some interval between the upgrade and the first launch of Photos.
Try, if you can see the original iPhoto Library in the first backup. Directly after the migration it will have a filename extension ".migratedphotolibrary", but this library should still work with iPhoto, nothing changed but the extension. -
I am using a Mac and the 9.0.1 version of Firefox
Firefox Help already had an answer for me - should have looked better: https://support.mozilla.org/en-US/kb/latest-firefox-issues#w_icons-missing-in-the-bookmarks-menu
IT WORKS PERFECTLY NOW!!! THANK YOU! -
I put SKIPFINALSUMMARY=YES in my cus.ini
But the page still shows at the end of process.
I don't care what's in it,but just make this page hidden automaticlyHaving MDT display the wizard in case of a error (red/salmon) is by design.
Better to figure out which steps are failing in your task sequence and/or marking the failing steps with "Continue on error" in the Task Sequence Editor. That will suppress errors that are really warnings.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com -
Hi,
I am providing support to one of our clients, where we have jobs scheduled to load the data from the tables in the source database to the destination database via SSIS packages. The first time load is a full load where we truncate all the tables in the destination
and load them from the source tables. But from the next day, we perform the incremental load from source to destination, i.e., only modified records fetched using changed tracking concept will be loaded to the destination. After full load, if we run the incremental
load, the job is failing with the error on one of the packages "Violation of PRIMARY KEY constraint. Cannot insert duplicate key in object '<tablename>'. The duplicate key value is <1234>, even though there are no duplicate records. When we
try debugging and running the failing package, it runs successfully. We are not able to figure out why the package fails and when we run the next day it runs successfully. Request you to help me in this regard.
Thank you,
Bala Murali Krishna Medipally.Hi,
I am providing support to one of our clients, where we have jobs scheduled to load the data from the tables in the source database to the destination database via SSIS packages. The first time load is a full load where we truncate all the tables in the destination
and load them from the source tables. But from the next day, we perform the incremental load from source to destination, i.e., only modified records fetched using changed tracking concept will be loaded to the destination. After full load, if we run the incremental
load, the job is failing with the error on one of the packages "Violation of PRIMARY KEY constraint. Cannot insert duplicate key in object '<tablename>'. The duplicate key value is <1234>, even though there are no duplicate records. When we
try debugging and running the failing package, it runs successfully. We are not able to figure out why the package fails and when we run the next day it runs successfully. Request you to help me in this regard.
Thank you,
Bala Murali Krishna Medipally.
I suspect you are trying to insert modified records instead of updating.
Maybe you are looking for
-
What kind of external drive should I get for my macbook pro for backups etc
what kind of external drive should I get for my macbook pro for backups and storage
-
I cannot shut down Itunes on my laptop with Apple TV running
any same thing? it will just bounce and restart how can I turn off itunes from my laptop this only happened after I set up my apple tv
-
BEx Analyzer error -2147417848 (80010108)
Good morning, We are upgrading our GUI from 6.40 to 7.10, and with that, Analyzer 3.5 is reinstalled. When we try to open Query designer 3.5 or Analyzer 3.5, we get Run-time error -2147417848 (80010108), method logon of object _CSAPLogonConnection f
-
13" MBP Retina / ML slow to wake
I have a small issue where when I open the lid on my Macbook Pro Retina 13" after it has been closed for a while it takes a little long (5 seconds or so) till it lets me input the password. If the lid has only been closed for a little while it lets m
-
After downloading a film rental in itunes, and when pressing Play following message comes up: We could not complete your Itunes Store request, -42110 an unknown error occured