My nano 6th gen was working fine until the updates
My nano 6th gen was working fine until the updates now it's on the pc but not iTunes! I've uninstalled and reinstalled iTunes but nothing is working! Please help!
Here is an apple article that might help:
http://support.apple.com/kb/ht1925
i
Similar Messages
-
I am having the same problem that Paul Birgy is having. It was working fine until the update.
I am having the same problem that Paul Birgy is having. I can send email from my program but now the reciever cannot read it. Before the update my emails I sent from my program were readable by the reciever.
I send out invoices from Peachtree Premium Accounting 2005. I click on the email icon on top of page and it goes to Microsoft office outlook 2007. It shows as an attachment and in the message it tells the receiver they need adobe reader installed in their computer to read it. It was all working fine until the last update for adobe reader.
Now they get error message. Adobe Reader could not open "Invoice #106.PDF" because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded.)
This started March 3, 2010. Since then I have been faxing out of the Peachtree program. That still works fine.
This problem seemed to start right after one of the updates. I was told to try and reinstall Adobe Reader. I have tried that twice and still have the same problem.
To the best of my knowledge I have not had any problems with Peachtree.
Cathy
Date: Tue, 25 May 2010 14:40:25 -0600
From: [email protected]
To: [email protected]
Subject: I am having the same problem that Paul Birgy is having. It was working fine until the update.
Sounds like either
A. Something in your accounting software is corrupting the file or;
B. Something in your email is corrupting the file (some email providors use compression to make the transfer faster which can mess up a PDF).
What hapens when they try and open it? Do they get an error message? If so, what is it (this matters)?
At any rate, it's doubtful that this is a Reader issue but give us some more detail and maybe someone can help here.
> -
I am trying to fix a friend’s eMac. It was working fine until the name of the administrator was changed incorrectly in Systems Accounts. Upon restart the computer failed to mount. I tried to reinstall Tiger and could not. The destination to do this install could not be found. While in Disk Utilities I tried to repair and then zero out erase the hard drive, this also could not be successfully done. The hard drive was working perfectly before the name change. I may try to load Tiger from the eMac onto an external drive and then hope to erase the eMac internal drive.
Thank you for your thoughts on this as it would be a shame to retire this trusted computer.
Nick M.Hello,
Thank you very much for your attention to this. Yesterday I was able to get the eMac to install Leopard onto an external drive. I had hoped that once done I would be able to initialize or erase the content of the internal drive in Disk Utility, but was not able to do so, I only received error messages telling me my request failed. This was also true when I tried to create partitions on it. So in effect, the computer runs, but only from the external drive. I could not even find the internal drive while running from the external drive. Where is it? And the internal drive only occasionally shows up in Disk Utility.
As for holding Option and Alt, the internal drive did not show up.
And Leopard was running on the eMac when I lost contact with it. Again, all failed when a name of the administrator was changed, but was not properly done. Or something like this.
Is there anyway I can use Terminal to help reach the internal drive?
I realize I am asking a lot of questions.
And I thank you for your time,
Nick M. -
my apple tv was working fine untill the AirPlay option disappeared. I haven alterd the settings and have tryed rebooting both iPhone and ipad. I even rebooted the ATV and that disn't work. i am connected to the same network on both devices to. My iPad is up to date but my phone isn't but as I said mirroring and AirPlay worked fine on both devices befor...
Hi F1N5G10,
Thanks for contributing to the Apple Support Communities.
It sounds like you don't have the AirPlay option on your iOS devices. Restarting your Apple TV and iOS devices was a good first step, and you can find some additional tips to guide your troubleshooting at this link:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Sincerely,
Jeremy -
So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke
Have not heard of that but here is what I would do - test after each step to see if the problem is solved
1. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
2. If that does not work - back up to iTunes and restore to factory settings
3. Check to see if the problem is resolved before restoring from backup -
My service preferences won't set after installing combined update earlier this week and the security 2012-4 update that caused so much problem with mail. Is there a list of changes that was made in safari with this latest update, because the bookmarking isn't working the same and the readling list page is gone?
because the bookmarking isn't working and the same and the reading list page is gone?
Your profile indicates you have v10.7.2 installed yet your topic refers to v10.6.8 (Snow Leopard).
Try this...
Open System Preferences > iCloud
Deselect the box next to Safari then reselect it.
Give iCloud a few minutes to re sync your bookmarks and reading list.
Safari 5.0.5 is an outdated version. You need to update Safari.
Click your Apple menu icon top left in your screen. From the drop down menu click Software Update...
Restart your Mac after the updates are installed. -
Anyone else having this problem?
Yes iMessage was barely working before (resetting network settings is what got it sort of working), but after 7.0.3, it's more broken than ever. I can't send ANY texts to iMessage users, even if iMessage is shut off. I tried resetting, I also tried resetting network settings again, but nothing has helped. It won't let me activate it.
FindMyFriends keeps giving me a prompt to connect to iTunes. And no matter how many time i click OK, it just keeps popping up. I have to try to click my way out of it faster than the prompt appears, or i just get stuck in an endless loop. And with how slow iOS 7 is on an iPhone 4, it's a bit if a challenge.
This is the first time I'm actually ready to start looking at other phones, these problem have been BEYOND frustrating. -
I have tried re-booting Apple TV as well as the television, etc.
Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device? -
I have a 3GS and since I did the IOS6 update my phone won't send pictures via text message. Anyone know how to fix this?
Do you have the Onavo app installed? If so, try removing it.
1. Go to your Settings app -> General -> Profiles
2. Locate the profile called "Onavo"
3. Tap Remove
4. Go back to your home screen and delete the Onavo Extend icon -
My ipod nano was working fine until i uploaded some new tunes today. It sync properly and once disconnected it just switched off and would not even turn on. I have put it on charge for a few hours but nothing happens, infact the charger is getting hot. Pleaseeeeeeeeeeee help I need my ipod.
The backlight burned out from getting it wet. You will have to replace the screen at a 3rd party shop, buy a screen and replace it yourself, or make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $199 USD.
-
My iPad was working fine until Tues. Night. I went to go on facebook and it shows a white page like it is coming on the it goes back to the home page. I have turned it off, deleted Facebook and put it back on but it still does the same thing. What can I do?
Morning DeeHutton,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario -
I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.
It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there. -
my itunes was working fine until i tried downloading the most current version of itunes, now when i try to get on my itunes library, it wont boot up and has error codes, error 7, and( windows error 126). it also says that MSVCR80.dll is missing from my computer,please re install itunes. but when I try to re install it it will not install on my computer.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now. thanks itunes; it was working fine until i did the update you said i needed. what do i do now??????
No one here said anything about an update or your device needing it.
FYI, you are not addressing Apple here, we are all users like yourself.
If the device is in recovery mode, the only option is to restore it. All data on the device is gone. This should not be an issue if the device has been used as designed and regularly synced/backed up. -
PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!
What is your operating system? Reader version? Are these local or online PDFs? If online, in what browser?
Can you post a screenshot: https://forums.adobe.com/thread/1070933
Maybe you are looking for
-
I watched the on-line presentation on Faces yesterday, and decided to dive in and try to build the same application myself. I noted the following problems, which no doubt have already been reported, but just in case... 1. The range validator presents
-
Trying to store iTunes music using iclouds gbs
i just updated my mac to lion so i could have iCloud, i bought iTunes match and have 5,000 songs on my iTunes. i just purchased an iPhone 4s 32 gb. now is there anyway i can save all those songs over iclouds gb instead of wasting the space on my phon
-
For some reason, the App store identifies a software update is required on my iMac, but after the system reboots, the update is still required. Is this a known problem, please? Thank you. Oops, I didn't search the forum properly. Got an answer now.
-
I've installed ColdFusion MX7 Standard on my Windows 2003 server which is running IIS 6.0. When I try to go to http://127.0.0.1/CFIDE/Administrator/index.cfm it prompts for the login. The server is a domain controller so I use the administrator accou
-
How to create DVD which auto-plays video (no menu)
Subject pretty much says it all. Is it possible to create a DVD which simply plays a video without a menu (preferably looping the video)?