My nano arbitrarily moves from playing to paused, with no human interaction

My 1st gen nano arbitrarily moves from playing to paused, with no human interaction. This seems to be worse when it is in my Altec Lansing InMotion speaker, but it happens when it is not in the speaker as well.
Reset didn't do anything helpful.
It ran out of warranty 2 days ago.
Suggestions?

I've also tried resetting my iPod nano (2nd gen)and nothing helped with the pausing issue. But one thing that did help for awhile was resetting the nano, deleting the songs and restarting it....

Similar Messages

Any one know how to stop iTunes movies from playing menu music when movie is paused?

Anyone know how to stop iTunes movies from playing menu music when the movie has been paused?

JourneyMan24 wrote:
Anyone know how to stop iTunes movies from playing menu music when the movie has been paused?
Can't. This is done for the individual movie, not by iTunes.
Some have it, most don't.

How do I stop my movie from playing?

I have used previous versions of Adobe Flash and now have Professional CS5.5, and I am coming to you with an embarrasingly, ridiculously stupid question that is absolutely stumping me. My movie cannot stop playing, no matter how many stop(); I've embedded in there. I created a layer on top, added the stop(); code at the end of the scene, and the swf ignores it and starts playing the next scene. As an experiment, I put a stop(); on the very first frame of the .fla, but that too is ignored. I have dozens of stop(); action commands riddled throughout the movie, but not a one of them is capable of stopping the exported movie from playing and looping. I assume there must be some simple, easy property or code trick or document preference or something that I've overlooked, but I can't for the life of me figure out what it is. I thought stop(); was one of the easiest commands of all, but apparently it has stumped me. Help!

This is literally what I have in the first frame of the actions layer of the Main Menu....
stop();
...and when I export into a .swf movie, the movie does not stop.
Update: in case anyone wants to know, all that is on the stage on the first frame are three images, two of which are at the beginning of a motion tween. There are movie clips and buttons elsewhere in the movie, but none exist on the first frame. FYI.

IPhone switches from play to pause randomly

When playing music on the iPhone it will randomly switch from play to pause then back to play again on its own. It behaves like this randomly and the time before it switches back to play is equally random from 2 sec to 15 sec. This is annoying. Anyone else experience this or have any idea as to the cause? I have version 2.0.1. TIA

One thing that might help out.
When you notice the iphone going from play to pause, is it when you are using the earbuds that came with the iphone or are you using a different pair.
The reason for this questions is if the earbuds become disconnected from the iphone it is supposed to pause. Or, is you squeeze the mic part way down the earbud cable it is supposed to pause.
Try wiggling the headphone jack in the iphone to see if you can produce this issue.
Also, try wiggling the cable around the mic on the cable to see if you can produce this issue.
Hope this helps.

I'm getting this error: It looks like you've the new version of Firefox. Unfortunately, there is currently a bug that is preventing players from playing Java games with version 3.6.14 of Firefox.

cant play on Pogo.com, error: theres a bug that prevents everyone from playing Java games with Firefox new version.

You can update Firefox to the latest 3.6.15 version via "Help > Check for Updates"

Why can I not buy music and movies from the SA site with my SA credit card???

Why can I not buy music and movies from the SA site with my SA credit card???

I'll answer myself after reading the threads, now I am so sorry I bought the dam thing!!

I have just updated my iphone 4s with ios7. since then i cant play movies from my netflix app with my av cable bought from the apple store. i get a message saying switch off mirroring on airplay, idont have air play and i dont have an apple tv. can anyone

I have just updated my iphone 4s with ios7. Since then i cannot play movies from my netflix app using my av cable to tv. which i baught from an apple store. i get a message saying turn off mirroring on airplay. i dont have airplay or an apple TV. what can i do?
Thanks jonmac22

Hi Everyone,
hope this message finds you all in time. The recent Apple TV update 5.1 is terrible. Apple knows it is which is why (thankfully for some relentless user -I have no idea who but I believe it was under threat) they have allowed to sign 5.0.2 again which means you can downgrade your Apple TV 2 and 3 to a 5.0.2 version via iTunes. Who knows how long they will keep the window open but I have downgraded my ATV early this morning. I couldn't post this earlier because I was out all day but I am doing it now.
Here's how to do it:
1) Connect your ATV to your computer via a Mini USB (not included with ATV but included with many other electronic devices) - in order for your ATV to appear in iTunes you must FIRST plug the USB cable to your computer and ATV and only THEN plug the power cable.
2) Download your ipsw restore file from Apple.
5.0.2 (ATV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
5.0.2 (ATV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
3) In iTunes select yout ATV, hold SHIFT and click on Restore
4) Find and choose the downloaded IPSW file in the Open Dialog Box and hit Next
5) As long as Apple still signs that version the Restore process will begin and will take a few minutes to complete.
Enjoy!
raadore

MP4 movies not playing on iPod with version 1.3

I have iTunes version 7.6.1.9 and iPod firmware version 1.3. I have several movies converted to MP4 format via Nero which played on the iPod just fine up until about 10 days ago. Now the MP4 movies will no longer play on the iPod, i just get a blank screen. The one movie I did convert using Handbrake to M4V format does still play on the iPod. Also I downloaded an MP4 movie from ipodarchive.com and it plays fine on iPod. All movies in all formats play fine in iTunes.
Does anyone know if there is something in one of the firmware updates which prevents the playing of MP4's converted by certain programs?
Thanks

I found the same problem. It's not all mp4's, though; some of mine work perfectly. I think higher quality videos don't work, for some reason. Movies at 159 kbps and 640x480 don't work, though they used to. Movies at 79 kbps and 480x352 still work fine.
Have you found any fixes/workarounds?

Exported movie cannot play on iPod with video

I exported my slide show to 320x240 .mov file (containing a fairplay AAC track from iTunes). I then dragged it into iTunes and it loads successfully onto my iPod with video. The movie shows up in iPod's menu but when I go to play it, I get a black screen for about 10 sec. (length of movie= 5min38sec) and movie ends.
This file plays fine in iTunes6.0.1 and QT7.0.3. I try to export the movie from QT to iPod format but Export is disabled with that movie probably due to fairplay limitations.

Hi anthony,
You will probably get better answers in the iPod Video discussions, but here are two Apple links to help you out.
http://docs.info.apple.com/article.html?artnum=301461
http://docs.info.apple.com/article.html?artnum=302559

Purchased movie from Itunes wont sync with Iphone but rental movie will????

I purchased a movie from Itunes and it shows up in my library movies but it wont sync with my iphone. Before I bought the movie i rented a movie to make sure it works and I liked the format so I know that it can auto sync with the iphone. In they Sync section of Itunes under videos it only has 2 headings. Rental movies and TV shows. There is no option for Movies at all so it does not even come up to transfer it over to the phone like with the rental.
I have solved the problem temporarily but would love help on a proper fix. If I check the box manual merge music and videos on the summary page I can get the movie over by dragging it from the library and dropping it into the phone but it still does not show up under the video tab but is on the phone. This then deletes all my music and I have to manually sync that as well.
HELP!!!!!!!!!!!!!! I am using a mac book with an iphone and a move in Itunes that I actually paid for - from itunes. I just cant figure it!
Natalie

I think the layout in sync could be improved for movies perhaps putting Purchased Movies right after Rental Movies. When I am on that tab, Rental Movies (I have none and it tells me so) and then TV shows are visible on the screen with lots of blank space under. I had to scroll down to find the movie sync option (which may seem pretty obvious - but with all the white space after TV shows, I didn't notice that the scroll bar had room to scroll further). Yes, I feel a little stupid (and grateful to you for making the solution so obvious), but I do think the tab layout contributed to my ineptness.

How to buy a movie from US iTunes store with Finnish credit card?

Tried to buy a movie: "One Track Heart" which was advertised in the movies web page with "available on iTunes" button.
Link leads to iTunes store page, where is error message like: not available in your country, you will be linked to another iTunes Store.
When buying a movie from US iTunes store, purchase does not happend because of "you Apple ID is not valid for purchases in US iTunes Store, you will be redirected to the iTunes Store Finland".
How come it´s easy to buy a DVD from states via Amazon, but very difficult via Apple?

This is what Amazon-instant-watch service replied as a error message:
"We are sorry...
We could not process your order because of geographical restrictions on the product which you were attempting to purchase. Please refer to the terms of use for this product to determine the geographical restrictions.
We apologize for any inconvenience this may have caused you."
Apple should see something to learn in this Amazon answer.

Make my movie clip move from left to right with arrow buttons.

Hi hope this is a quick one..
I have all the elements set up already so just need the
logistics of how i can acheive the following:
I have an arrow at the furthest left and furthest right of my
main flash movie. I then have a movie clip in the middle which has
indidivual images on a kind of long strip. When i click the left
arrow i want the movie to begin to move from the right to the left
and visa versa. I have achieved this with the keyboard left and
right keys so what i really need is to convert this theory for the
left and right arrow buttons?
var speed:Number = 4;
object_mc.onEnterFrame = function() {
if (Key.isDown(Key.RIGHT)) {
this._x = this._x+speed;
} else if (Key.isDown(Key.LEFT)) {
this._x = this._x-speed;
Any help will be greatly appreciated??
Thanks
Ben

use the getAscii() or getCode() methods of the key class. and
you can always use the trace function to check the values to be
used in your if-statement.

Are there any way to play movie from hard disc uploaded with java player?

I found quicktime player can export the movie as webpage versions, uses java to play the movie instead of quicktime player.
How can I do the same with iweb? From the webpage which quicktime generated said should insert some code to the head of page and something else, but how do I insert those codes to the page I create with iweb?
It said :
"To make your media viewable on the Internet, your media assets (movies, poster image) must be placed on a publicly accessible server.
The URL parameters must be modified if your media assets are served from a different location than your web page.
The movie URL parameters must always point to the reference movie (carsmoke.mov) rather than a source movie.
The reference movie must be kept in the same folder as the source movies.
Source movie names cannot be changed, but you can change the name of the reference movie (remember to change it in the HTML code as well).
Please note, to properly validate as XHTML, the <style> tag and the first <script> tag should be placed within your page's <head> tag."
Use this code in the <head> of your web page:
<script src="http://www.apple.com/library/quicktime/2.0/scripts/prototype.js" language="JavaScript" type="text/javascript"></script>
<script src="http://www.apple.com/library/quicktime/2.0/scripts/qtp_poster.js" language="JavaScript" type="text/javascript"></script>
<link href="http://www.apple.com/library/quicktime/2.0/stylesheets/qtp_poster.css" rel="StyleSheet" type="text/css" />
Use this code in the <body> of your web page:
" <<a href="carsmoke.mov" rel="qtposter">
<<img src="xxx.jpg" width="120" height="50" />
<</a> "
(I put < into << so it will not execute in this page...)
How to do these with iweb?
Message was edited by: kosmo.yin
Message was edited by: kosmo.yin

kosmo.yin wrote:
Are there any way to play blue ray disc on imac 27 under OSX system ?
Wonder what kind of software and blue ray player need to buy to play it.
Yes there is. See the link below:
http://eshop.macsales.com/shop/optical-drives/superdrives/

How do I stop movie from playing when I leave frame?

Hi,
I have designed a website using Flash and ActionScript 3. In
the portfolio page, I have TV commercial that are available to
play. What I need is 1) when the user leaves the TV ad page, I want
the tv commercial to quit playing (right now, it continues even
though the user has moved on to other pages). I am using the flv
playback component. My TV commercial are external flv file.
All of my pages are just individual frames in a main
timeline. Each page has a frame label.
I would appreciate any help anyone can give me with this. I
have tried for weeks now, to solve this problem and I just don't
know enough actionscript or flash to figure it out.
Thanks in Advance

Give your FLVPlayback component an instance name and then,
possibly from the navigation element that moves the user from that
frame, tell that component instance to stop();
Without a more complete description of your movie's structure
its difficult to tell where, or in how many places, you should
issue the stop() command.

How do you stop a movie from playing past the end?

I uploaded a video to Vimeo I made from various clips and there was about 40 seconds of black after the end. How do you add a marker so it knows where to stop and hopefull return to the beginning. I already put the 'stop' marker in but it plays past it in the elements editor and assume that's what it did in the uploaded video. I believe 'stop' marker is only for DVD play. I have Elements 11.

dufusdad
Expand the Timeline with the -+ slider above the Timeline. Make sure that the slider is all the way to the right so that you are at maximum expansion. Then, as Hunt suggested, hit the End key and inspect the area where the Timeline Indicator stops. These possible fragments/leftovers present typically as very thin vertical black lines scattered in the tracks. After you delete any such fragments, repeat the process to make sure you have all the fragments.
The major reason for me adding to this thread was to remind you never to put a stop marker at the end of the last item on the Timeline. It is a bad practice to fall into. It is not needed and creates all sorts of problems especially as seen in burn to disc.
Please let us know the outcome.
Thanks.
ATR

My nano arbitrarily moves from playing to paused, with no human interaction

Similar Messages

Maybe you are looking for