MY nano has worked fine up until now.

My Nano is about 3 years old and has always worked great. I use it at the gym and when on my motorcycle (but not if it's raining). This morning I used it at the gym and turned the volume down, then later when I had it on the motorcycle I could not turn the volume back up. I've got it docked now and still can't get the volume to change.

I had this same problem and not sure it is a long term solution but it is working for now. I played the nano to drain the battery completely down. Connected to the computer to recharge and I reset the nano. The headset I had used had a volume control on it. I plugged an external speaker into the nano and ran it for several hours - no problems. Then I used an old headset (no volume control) and it has worked with no problems for a few days now.

Similar Messages

Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit).

Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit). Have tried it on other browsers, and works as it should. The last add-on i installed for Firefox was "Fox Filter" so my kids couldn't accidentally stumble onto sites of immoral tastes. I can't see why that would have any effect, but it was the last update/add-on i installed to the browser, but even then,.......it was working fine for a week and a half afterwards until now. Please help.
== This happened ==
A few times a week
== A week and a half after i installed Fox Filter. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

Hello Steve.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
If you detect a faulty add-on, you should contact its author for support. You can also search for alternatives. Site filters are relatively common in the add-ons gallery: [http://addons.mozilla.org addons.mozilla.org].

Hi, my Macbook says its connected to the internet, but it's not working. It's about 2 years old and has been fine up until now. Its the same internet provider and I have a work PC laptop that is connecting fine. Any help greatly appreciated. Liz

Hi,
My MacBook Pro won't connect to the internet, although it says it is connected. The laptop is about 2 years old and up until now has worked fine. My work PC laptop is connecting to the internet fine so I know it can't be the connection. I've checked for Adware/Malware (just in case) via safemac and that all seems fine.
I'm running OSX 10.8.5.
Any advice would be greatly appreciated.
Many thanks
Liz

Believe it or not, that article helped me find a temporary solution. After reading it I realized that the problem did have to do with my DNS settings. I had taken the DNS settings that my ISP gives me when I dial up and plugged them into the configuration for my AirPort card. This apparently caused a problem because, although my wireless network is always on, it's not always connected to the internet. So those DNS settings were invalid most of the time.
I found that as long as I leave the area for DNS servers blank, the computer logs in normally. This further confirms my suspicion that something was trying to access the internet at login. I guess as long as I don't specify any DNS servers, the computer realizes it doesn't have an internet connection through my AirPort card.
So I just created two network locations: one for when my network is connected to the internet and one for when it isn't. In the first, I kept my original DNS settings because they work as long as I have an internet connection. In the second I did not specify any DNS servers. This seems to work fine, but I'd still like to know what is trying to access the internet at login. I've disabled the automatic update feature in all my programs that have it, but that doesn't seem to help the slowdown at login. Does anyone know how I could figure out what program is trying to access the internet?

I am updating content in an old site and am using an old extension to close a child page. It has worked fine up until I started using CS6. The code for this is in a template I am using and the code has not changed.

So the site is www.fulcrumcwi.com and the page URL is: FulcrumCWI Rebecca Morgan Operations Strategy Consulting Newsletters.
if you choose the first HTML link to the current newsletter when you try to use the close buttons neither of them work. Yet if you go down to the issue from January, and go to the HTML version, it works just fine. This is the code that the extension puts in:
<form>
<input name="Close" onclick="self.close();return false" type="button" value="Close" />
</form>
I haven't changed it in any way. The only change is that I'm using Dreamweaver CS6 to make these changes. Anyone have a fix for me?
As always, thanks in advance. (and yes, I know this site needs major updating)
GraphicEdge

Boy, that didn't really come out very well.
On the archive_newsletters.html page, the "HTML" links are supposed to have target="_blank" in them...
<a href="newsletters_html/2014_03.html" target="_blank">HTML</a>
so a new tab is opened with the info. That new tab is then closed by the this.close() javascript.
On the newsletters that don't close correctly, there is no target="_blank" to open them in a new window initially, so they can't close with that method.

TS1363 "An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari

I'm working with a Mac, with 10.10.2 system. My Audition program has been working fine for years now. But, there is a problem I can't solve. All my markers on a given piece of audio allows me to left click to highlight the time signature until my audio

I'm working with a Mac, with 10.10.2 system. My Audition program has been working fine for years now. But, there is a problem I can't solve. All my markers on a given piece of audio allows me to left click to highlight the time signature until my audio reaches the one hour point. From there on, the left click will not give me the drop down menu in order to copy and then paste into an Excel sheet I then have to submit for the proofing purposes. After the one hour mark, I can only control/c in order to highlight, then when I slide up to my Excel sheet, I'm able to right click and paste. Why is the program not, all of a su allowing me to left cllick the mouse and have a drop down menu give me the option to "copy, " as it does for any time signature markers up to 1:00:00.000?

Which version of Audition? With the latest version of Audition running on a Windows 7 machine I can't get a dropdown menu at all when I left click on the time in Markers List. The only way to do it is with cntrl-c.

My ipod nano this morning has started to tell me the accessory (lightening to 30-pin adaptor) I use for playing it through my docking station is not supported. It worked fine up until last night. Does anyone know why this might be?

My ipod nano this morning has started to tell me the accessory (lightening to 30-pin adaptor) I use for playing it through my docking station is not supported. It worked fine up until last night. Does anyone know why this might be?

Clean any debris from the adapter, docking station connector and the connector on the Nano.

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred - any ideas?

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred and available - any ideas?

Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks.

TS1398 My ipod touch will not connect to our wifi all of a sudden. It has worked fine for 6 months and now just has stopped connecting. I have done all the trouble shooting tips available. Any other ideas?

We bought this itouch for our daughter for Christmas (2011), It has worked fine all this time until now. All of a sudden it will not connect to our home wi fi. All the other ipods/iphones/laptops and desktop are connecting fine so I know it is not the router itself. I have tried all the standard troubleshooting tips (forgetting the network and resetting it on the ipod, turning it off an on, plugging it in and updating the software, we even restored it completely from itunes as a new ipod). It lists the network as available but then when you try to connect it just sits there with the little circle icon thing spinning, trying to connect but never does.Please help!

So you also rebooted your router correct? Does the iPod still connect okay to other networks?
B-rock

My 7th gen nano was working fine, now no sound

And yes, I tried two different sets of ear buds and they were both pushed in all the way. It's worked fine for months, now this morning everything appears normal, but there is no sound output. Any ideas? Thanks!

Hey live_music_fan,
I know you have a 7th generation and the article this information is from is for the 6th gen, but the steps should still apply. If you haven't already, I would run through the following:
Check the volume setting.
Try adjusting the volume by pressing the volume buttons.
Try another song or audio file.
Reset iPod by holding down the Sleep/Wake button and Volume Down buttons until you see the Apple logo appear.
My issue is still not resolved. What do I do next?For information on servicing your iPod, go to the iPod Service FAQ.
from: iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

I have an iPhone 4S. Up until recently, the wi fi has worked fine, but about a week ago its been either really spotty or not working at all.

Hey guys,
This is my very first iphone.. ive had it since Febuary of this year (2013) Wi fi has worked perfectly up until about a week ago, around the 4th of July.
SO basically whats going on is i dont have internet at my house, but my mother in law does, so she bought a range extender and we have it plugged into our wall. We literally live 50 feet apart, and it has always worked fine no problems full wi fi bars at all times. So last week down here where i live in TN it rained and rained for like ^ days straight and the internet was a little spotty. So, my sister in law fixed the internet and rebooted it or whatever at her house and my laptop works fine, full bars, but my iphone goes between have one wi fi bar to being completely gone back to 4G. I have tried to just restarting the phone, no help, tried unplugging my range extender and back in, no help, tried restarting the network settings, and then "forgetting this network" and added it back and anytime i walk through my house the wi fi gets lower and lower until its dropped completely, when it didnt use to do that. I dont know what to do!! its stressing me out!!! And lastmonth i changed my data to 300MB when i use to have 3GB so i wouldnt have to worry about it but my bill was pretty expensive, so i changed it . Like i said, this is my very first iphone and apple product so i really dont know much about how to fix things... thanks guys for your time im sorry this is such a long question

Basic troubleshooting steps outline in the manual are restart, reset, restore from backup, restore as new. Try each of these in order until the problem is resolved. If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation. Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
Best
GDG

When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server. When I send to e-mail from another address, I get back an error saying the e-mail address is unknown. My e-mail has worked fine for years until

When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server. When I send to e-mail from another address, I get back an error saying the e-mail address is unknown. My e-mail has worked fine for years until yesterday. HELP!

The specific text of the error message is very important here — I'm not sure exactly you're encountering here.
If you're able to connect to your email server and are able send email to other email addresses and if the failures are specific to one email recipient address, then please contact the intended recipient of the failing email, and confirm their address is valid. (This is the way I'm reading your question.)
If you are unable to send any email to any other email addresses and this is specific to your email address, then try the web mail client interface (if one is available) to verify your login user and password, and check with your email ISP for assistance. If your email password works via web mail, follow this Apple troubleshooting guide, then — if everything else fails — I'd probably then entirely remove the email account from Mail.app and re-add it per your email ISP's particular setup requirements. (Some issue with the setup or maybe a corrupt setting in OS X or a problem at the mail ISP servers is a common problem, but this effects attempts to send to all email addresses via that account.)
An email account setup is specific to an email provider, unfortunately. If you're using one of the more common email ISPs, then there are usually setup guides and frequently-asked questions posted online.

My photos won't "load" - it has worked fine for at least two years, but suddenly now when I plug in the chip, iPhoto opens up as usual, but the window just says "loading photos", and the little wheel keeps on spinning - can anyone help me?? I am new here

my photos won't "load" - it has worked fine for at least two years, but suddenly now when I plug in the chip, iPhoto opens up as usual, but the window just says "loading photos", and the little wheel keeps on spinning - can anyone help me?? I am new here. I need to get it working again because we're about to go on a trip!

What version of iPhoto? Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and slide the scrub through songs. This has always worked for me until now. I have not changed any settings

While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and scrub through songs. This has always worked for me until now. As far as i know, i have not changed any settings. This is whle my phone is locked both on the slide up toolbar/menu interface and on the normal screen before i slide to unlock.

I skimmed through this very long post but from what I read, this sounds much more like a coverage issue with your network than a device issue. I have not seen or heard of this issue before and I do not have this issue personnally and & I use the music app quite frequently while working in the yard.
The DND feature should not be a factor at all if you're sure it's turned off. I always recommend restarting your phone by holding down the home button + the lock button for 10-12 seconds until the Apple logo appears. Once the phone reboots, do a test to see if this has helped to resolve the issue.
If not, go to Settings > General > Reset > Reset Network Settings. Then, test it out again. Post back if neither of these solutions solve your issue.

After moving all photographs from my first catalogue, which was a mess, to a new catalogue, it all worked fine. Until that is I tried to open the new catalogue, which had worked OK all day. I now get a window that says "Unexpected error, select another ca

After moving all photographs from my first catalogue, which was a mess, to a new catalogue, it all worked fine. Until that is I tried to open the new catalogue, which had worked OK all day. I now get a window that says "Unexpected error, select another catalogue."

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

MY nano has worked fine up until now.

Similar Messages

Maybe you are looking for