My nano is confused plz help it
Hey all, earlier I had transfered a bunch of music over to my nano but didn't eject it correctly so all the songs do not appear. This is ok because I can just reload them, however now when I load itunes and go the my ipod, it says it is 2.36gb full - however when viewing my song list on the nano or on itunes no songs appear, I try to add songs but I can only fill up the remaining space of 1 gb ish. There must be a way to wipe it completely or some how make it realize that it actually has 4gb free? Or are the songs there but the pod doesnt know its there?? eeeeek lool please help!! thx
now I'm having issues with it claiming that it is out of batteries however its been on charge for about 3 hours and it hasn't been used in like 3 days. My ipod updater i've had to restart numerous times, it either crashes, says that it doesnt have an ipod connected, or that the ipod files are in use somewhere else. However it is in correct on all levels. I'm seriously becomming frustrated with this thing!
Similar Messages
-
N8 camera setting confusion.plz help!
i have notice that when taking photo at 9mp,it takes the whole screen whereas when taking photos at 12mp, there are to black band on both side of the screen.
please refer to my attached photos tfor better understanding.
is that normal??plz help me,am confuse.
Solved!
Go to Solution.
Attachments:
on 9mp.JPG 304 KB
on 12mp.JPG 184 KBThis is normal. Sony Ericsson Vivaz have the same thing. I noticed that the phone lacks auto focus similar to vivaz. You need to press the camera button to get a image focused. This works huh, less well. To get best "autofocus/picture" i noticed that you should press the take photo on the cell phone screen. It performs a better autofocus. I really hate that the phone dont autofocus all the time like my Logitech webbcam or old Vivaz phone... SE vivaz ran symbian also. In fact i hate it Nokia fix it!!!
-
Windows xp and itunes don't recognise my nano.. someone plz help.. =(
my computer doesn't recognise the ipod nano, ocassionally it charges for about a minute then the ipod turns off, but ipod hasn't shown up in 'my computer' since april..! it works perfectly on my laptop, but it is annoying to use since i have to keep transfering music from my computer to the laptop. i don't understand why it doesn't appear in my computer or in itunes because my brother's JNC mp4 works perfectly on the computer.
i even called up technical help to ask, they told me i can send the ipod for repair and apple will definitely fix my problem, YET they sent it back without changing a single thing..!! apple is ridiculousI just fixed this problem last night. I hopped around a few threads here and found the answer but of course now I can't find it to give you the exact link. But I think I can walk you through it. You need to put your ipod into "Disk Mode". Plug it into the USB port, toggle hold on & off. Then press & hold center and top of the wheel at the same time for about 5 seconds. As soon as the apple appears, release and press the center and bottom of the wheel at the same time. When you see a check mark in the center of the screen release - that means you are in disk mode. When I did that suddenly iTunes recognized my ipod again (4 months later!!). I updated and everything was fine. I didn't even need to restore which is what I was trying to do. Good Luck!!
ipod nano windows at home =-( mac at work =-) -
Hello
i bought a new IPAD 2 64 GB 3G ios 4.3.3
when i bought it i notice that its capacity about 59GB then i got trouble in it so i use to restore it and i download the software again from itunes about 614 mb after that it works perfect but the ipad capacity 58.68 GB is this natural?
also i want to know what is ment by others i have 1.06 GB and i dont know what is this see the picture
i am help me aspRead this for an explanation on disk capacity:
http://support.apple.com/kb/TS2419
and this for the "Other" category:
http://www.faqoverflow.com/apple/7853.html
Regards. -
HELP!My 4GB Nano is screwed,plz help!
The other day I tried swapping some albums for my nano but all that happened was all the songs on my pod were taken off! Now when I try and put music on my pod it only it says i hav used 3gb of memory but there is actually nothing on the nano!!!
I'm so annoyed coz now im back to the old cd and minidisc walkmans!
Any suggestions as to what to do would b very very much appreciated!Have you tryed Restoring your ipod.
-
Ipod nano keypad lock ------------- plz help!!!!
there is some sign shown on the top left corner of the screen which is like a lock and the keys do not work.
ipod nano Windows 2000yes, i have checked it. do all ipods usually show a small lock sign on the screen when it is locked? is this normal or is there some problem?
-
Can i get ios 7 for ipod 4 because some of my friends have ios 4 on there ipod 4?
No
. As Apple said in June, iOS 7 is not compatible with the 4G iPod.
All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB -
Which is the best for me?plz help me .I've more confusing about my Career.
I've done B.E Computer Science and Engineering year of 2013. Currently i'm doing IT-Support Engineer job. I've only 7 months experience. But i know how to install,Mounting of the blade server.but i don't know about windows servers.but i can install server
OS.i have lot of confusion and fear also,about my career.which is suitable for me?plz help me.frnds.Hi, Ravi.
Based on your experience, you may want to start working your way to earning an MCSA for Windows Server 2012 R2. It requires you to pass three exams. The first exam you may want to take on is 70-410 which is on install Windows Server 2012.
Here is the MCSA: Windows Server 2012 certification title description:
http://www.microsoft.com/learning/en-us/mcsa-windows-server-certification.aspx
As you can see, it will require you to pass three exams. Here they are:
70-410 Installing and Configuring Windows Server 2012
http://www.microsoft.com/learning/en-us/exam-70-410.aspx
70-411 Administering Windows Server 2012
http://www.microsoft.com/learning/en-us/exam-70-411.aspx
70-412 Configuring Advanced Windows Server 2012 Services
http://www.microsoft.com/learning/en-us/exam-70-412.aspx
Microsoft offers free online training through different web sites. Consider these as a few of the many resources you can use to study for these exams.
TechNet
http://technet.microsoft.com/en-US/
Microsoft Virtual Academy
http://www.microsoftvirtualacademy.com/
By the way - if you are still in school and prefer a more entry-level certification, you can also consider the MTA certification track designed for college students:
http://www.microsoft.com/learning/en-us/mta-certification.aspx
Good luck!
Best wishes, Davin Mickelson -
Plz help i can't use my nano anymore
alright when i tried to put new songs in my nano there is a circle with a bar in it and it says do not disconnect I tried to reset it without succes plus i tried to make a restoration and it says you need an update but when the update is finish it cant install it omg so for 2 days i cant put off my i pod and there is a white window with a flashing icon with abar in black plz help how can i return to life my ----ing i pod
I can't even eject my stupid nano. This is high tech. We need a 10 year old. UGHHHHHHHHHHHHH
-
IPod Nano HELP!!!!!! PLZ HELP!!!!!!!!
Not all the time but sometimes when I charge my iPod nano mu iTunees will say iPod updated but when I unplug my ipod nano all the songs will erased of all iPod but there still on my iTunes. This has happened more then once. PLz HELP!!!!
Are you making sure to eject your iPod before disconnecting it?
While you are charging your Nano, you may want to click on the iPod icon under your playlists in iTunes, and see if any songs are on it. If not, your iPod may be set to manually update, which means you'd have to drag the songs you want to your iPod, as opposed to iTunes doing it automatically. -
Hi, my ipod nano when turn off miss batt charg , plz help
hi dear
my ipod nano when turn off miss batt charg , plz help menastaranfromcrowley wrote:
for example : my ipod have full charg , i turn off my ipod , after 3 days my ipod doesnt turn on , and show batt doesnt charg while i dont use it
The iPod Nano battery will not charge unless you connect it to your computer, to an AC outlet with a wall adapter, a charging dock or an auto adapter/dock.
You battery is always discharging when idle or shut off. You should read the manual for your model iPod Nano regarding batteries - iPod Manuals
iPod Models -
My first gen ipod nano is not recognized by win or itunes. Plz help me!!!
After i plug my ipod it appears on my computer after 10 min as removable disk not labeled as (ipod drive H) and i am not able to access it, when i try the comp get frozen for some time and then i get alert that i should insert disk into drive H. When I open itunes it is frozen most of the time and when it's not it doesn't recognize the ipod, the updater doesn't recognize it either. Ipod worked properly for a month or so and then my comp get restarted while ipod was connected to him and then this problem started. I tried everything i found here in support section several times and still it doesn't work!!! Plz help me!!!
Hello Caitlin,
I'd suggest taking a look through the following article for a whole host of useful troubleshooting steps that can help get your iPods to reappear in iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen -
I have problems updating and starting my iTune... I can not perforn regular Apple Software Update... When I click on the iTune icon, a small window message said ' this action is only valid for products that are currently installed' ... And I have been using iTune for some years... Plz help so I can upload all songs to my new toy, my nano watch... for my birthday gift..
thx,
James Chien
[email protected]Do you have the FastStart extension?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
i m confused about logo size and format plz help me out...@
You can design one logo for both purposes. But you cannot save just one file suitable for both. You need to make the design and then make a reduced size JPEG or PNG for your web site. You also need a version for print, but unless you know what is needed you cannot save it. Just keep the original PSD until you hear what your printer or designer needs for the brochure.
-
URGENT: Date format in Reports Giving me trouble...plz help me out
Hi guru's Can any one help me out
I
n the front end apps we are getting the date value as
BOM_SRS_DATETIME_STANDARD
Where we are entering the date value as MM/DD/RRRR HH24:MI:SS
The date format set in the company is like RRRR/MM/DD HH24:MI:SS
SO I format masked the date parameter in .RDF to RRRR/MM/DD HH24:MI:SS format.
While the actual date format in the data base is like DD/MM/RRRR HH24:MI:SS.
I checked all the old reports and the date format is like they masked the date format to company format and used the afterparameter trigger like bellow:
if :P_SENT_DATE_FROM is not null and :P_SENT_DATE_TO is null then
:P_SENT_DATE_TO := :P_SENT_DATE_FROM;
end if;
if (:P_SENT_DATE_FROM = :P_SENT_DATE_TO) and (:P_SENT_DATE_FROM is not null) then
:WHERE_SQL := :WHERE_SQL || ' AND CREATION_DATE = '||' to_date('''||:P_SENT_DATE_FROM||''''||','||'''DD-MON-RR'')';
else
if :P_SENT_DATE_FROM is not null then
:WHERE_SQL := :WHERE_SQL || ' AND CREATION_DATE >= '||' to_date('''||:P_SENT_DATE_FROM ||''''||','||'''DD-MON-RR'')';
end if;
if :P_SENT_DATE_TO is not null then
:WHERE_SQL := :WHERE_SQL || ' AND CREATION_DATE <= '||' to_date('''||:P_SENT_DATE_TO ||''''||','||'''DD-MON-RR'')';
end if;
end if;
I tried this but i couldnt get the output either.
I am pretty much confused.
Plz help me out...If you want to use a dynamic where caluse in your report query you can use a Reference Cursor using REF CUR QUERY tool in your report like this :
function QR_1RefCurDS return DEF_CURSORS.CHARACT_REFCUR is
temp_CHARACT DEF_CURSORS.CHARACT_refcur;
begin
IF :FROM_NO IS NULL AND :TO_NO IS NULL THEN
open temp_CHARACT for SELECT ACCT_CODE, ACCT_NAME
FROM CHARACT
ORDER BY ACCT_CODE;
ELSIF :TO_NO IS NULL AND :FROM_NO IS NOT NULL THEN
open temp_CHARACT for select ACCT_CODE, ACCT_NAME
FROM CHARACT
WHERE ACCT_CODE=:FROM_NO
ORDER BY ACCT_CODE;
ELSIF :TO_NO IS NOT NULL AND :FROM_NO IS NOT NULL THEN
open temp_CHARACT for select ACCT_CODE, ACCT_NAME
FROM CHARACT
WHERE ACCT_CODE BETWEEN :FROM_NO AND :TO_NO
ORDER BY ACCT_CODE;
ELSIF :TO_NO IS NOT NULL AND :FROM_NO IS NULL THEN
open temp_CHARACT for select ACCT_CODE, ACCT_NAME
FROM CHARACT
WHERE ACCT_CODE<=:TO_NO
ORDER BY ACCT_CODE;
END IF;
return temp_CHARACT;
end;
But first you have to declare a cursor type in a package
Maybe you are looking for
-
Error: Unable to display Flowtrace due to exception while initializing obj
Hi All, we are unable to open Flow Trace for bpel processes in em console. we are using SOA11.1.1.5. this issue is intermittent and occurs only on heavy load. in the console we are getting error as: Exception occured while retrieving the Flowtrace XM
-
JDeveloper EJB Class Editor lock
I created an EJB using JDev and used the EJB class editor to build the fields/methods in the bean. After working on the EJB for quite a while I reopened the EJB Class editor and found a blue error at the bottom of the window stating : Editor locked :
-
Hi basis gurus. I am installing solution manager 4.0 sr4. os is windows 2003 standard edition. database db2 ver9.1. At installation, Starting the instance phase i got error.. Dynamic link library(DLL) initiliazation routine failed. error in db6conne
-
Command-Tab & Dock not working right
I'm talking mainstream apps not showing up in the cmd-tab display. Usually Finder and one other are there, the rest not. In the Dock, apps which have been successfully quit still show their open dot until clicked on, whereupon, the dot disappears. Do
-
Is there anyone who can tell me more about my Question?