My Nano is no working because of wrong operation of updating ipod software

i download the recent IPOD software and try to update it to my ipod nano(1st generation). the message box shows " updating our ipod now", but suddenly, my computer is unplugged by mistake. my ipod nano is no working after that. the apple log display repeatly, but when i connect it to my computer, there is no response, and apple log still display then disapper, and repeat it for ever. so what can i do now? because there is no response when i connect my nano to computer, i can not reset, reinstall or whatever i can do. so could you please give me some advice for this problem.thanks a lot

I have the same problem, i accidently clicked update software..and it didnt load all the way and now when i plug in the ipod nothing updates to it, everything is deleted off the i pod even though itunes has songs.. someone please help

Similar Messages

  • HT4972 My ipad 1 is stuck on IOS 4 as the IOS 5 update instructions do not work. When I use itunes update the software looks for an update file and the apple site doesn't have one!

    My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Can't update ipod software v 1.1.2 to my Nano

    I have the "new" NANO, and have tried 3 times to download the update to v.1.1.2 (I currently have 1.1.1). I get an "unknown error 1453" each time I try to download the update. I currently have v. 1.1.1 and as far as I can tell all of my settings are OK.

    See if this article helps:
    iTunes 7 for Windows: iTunes could not contact the iPod software update server

  • My iPad 2 won't work because of the iOS 7 update,What should i do?

    Ok, so i updated my iPad yesterday. Today i was working on it and it got kind of jumbled. then i switched it off. When i switiched it on, my homescreen is blank and i cnt see anything except my home screen picture and the stuff at the top that shoows ur charge and wifi status. I cant see any apps so i cant go to setting or anything. it's like stuck on the screen and i can't do anything. Any suggestions what i should do?

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Wrong user on updating certain software

    Hello.
    I'm on my work iMac, and when I try to update some of the apps (Numbers, Keynote, Pages and iMovie) it asks for the previous users password. We did make a user for me, and deleted the old user, as well as I'm signed into the App Store, not him.
    I've tried putting Numbers in the Trashcan, but dare not empty it; when I go to app store and find Numbers, it says it costs money, but I should come free with this iMac.
    How do I resolve this program, so the apps are using my apple ID instead of the old, deleted one?
    Thanks.

    This is what happens when business allows folks to set up new Macs with their personal consumer Apple ID. Technically, all the software on that Mac belongs to the previous user. You will need to follow the steps for a 2nd hand Mac and erase it and start over as a new Mac. But it would be better if your company has an IT dept set up and control the Apple IDs used on company Macs.
    Preparing a 2nd Hand Mac for use -
    You need to erase the HDD, reinstall the version of OS X that shipped from the factory on the Mac and then set it up as new with your own Apple ID.
    User Linc Davis explains how a new owner can prepare a 2nd hand Mac for their own use.
    https://discussions.apple.com/message/25468326

  • [865PE/G Neo2 Series] Video stop working if I install Intel Inf update chipset software

    Hi,
     i have big problem    with my MS-6728 (865PE Neo2-S) and Geforce 4 Ti 4200.
    After installing Intel inf update for chipset my Windows XP Pro SP1 stop booting and freeze  (if i use Detonator 61 or higher) or just use standart VGA driver (if i use Detonator version 41).
    If i remove Intel chipset (i tried all versions) - video is working good 
     Why Intel Inf update chipet drivers have conflict with my video card ?

    Hi,
     i did as You say - remove Windows XP, format my HDD, installed again    Windows XP, installed Intel Inf update - system Ok
    install video drivers - freeze and crush.
    Nothing help    ....
    I found on this forum that some people have problem with video like me. they talk about bad agp port driver.....
     What can i do now ?

  • Wrong operating system updates

    i had to do a total reformat of my vista computer do to a cleaner prograqm i did not download.i did not use anything except what was stored on backup of my computer,not i cannot open control p[anel,it flases then closes,a constant error ask me
    to go to microsoft due to a fake operating system,it also states windows 7 ,i dont have windows 7 i have visa.the only thing extra i did after reinstalling my system was updating,please help 

    Hi,
    Firstly, please make sure you have a genuine Operating System.
    Then verify that your copy of Windows Vista is activated, follow these steps:
    1.Click Start, and then click Computer.
    2.Click System properties on the toolbar, and view the Windows Vista activation status in the
    Windows activation area at the bottom of the System properties
    box.
    After that, try to open Control Panel again for test.
    If the issue still persists, repair your installation as the reference below:
    How to repair the operating system and how to restore the operating system configuration to an earlier point in time in Windows Vista
    http://support.microsoft.com/kb/936212
    Karen Hu
    TechNet Community Support

  • Music on my nano to my work computer?

    I have a Library on my home computer. Brought the nano to work, downloaded itunes. Now all my songs on my nano are just grey and I am unable to add them to my library on my work computer? There has to be a simple answer to this ......right.
    Thanks to anyone who can help.

    Welcome to Apple Discussions!
    First, see this...
    Using iPod with multiple computers
    The songs are grey because you are automatically updating the iPod.
    If you set the iPod to manually update, then you can play the songs on your iPod through your work computer...
    Manually Updating iPod
    You cannot use iTunes to transfer songs from the iPod to your computer. You would have to use a 3rd party program, such as...
    YamiPod
    However, if you always have your iPod with you, you could just play the songs on it through your work computer.
    btabz

  • I have redemption code from 500px but it does't work because of country of account doesn't match the country of the code  , they gave me another one and does't work also because something is wrong and try again?

    I have redemption code from 500px but it does’t work because of country of account doesn't match the country of the code  , they gave me another one and does’t work also because something is wrong and try again?

    creative cloud abo from 500px does not work with german Adobe ID!! What can I do? has the email address for 500px (for anyone else reading this message) and a note saying that 500px has a fix... so you might try writing to 500px again

  • Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in

    Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • Video IPod & IPod Nano won't work on Vista 64-bit system

    I recently updated my OS to Windows Vista Home Premium 64-bit system on my Intel Pentium Core 2 Quad PC. Somehow, I have a problem using my Video Ipod & Ipod Nano. After downloading the latest Itune+Quicktime & plugging in the USB cord connecting my IPods, i got this blue screen & different error message. When I reboot my PC, it won't run my OS unless I unplugged my Ipods. I tried istalling the old IPod software that comes with the IPod without any luck. Any idea on what's causing this problem? Are there any patch for Vista 64-bit that make the OS work with IPod?

    Hi,
    I’ve got the new version of Itunes (7.6.1) but I still get the error where it tells me to download and install a 64-bit version of Itunes. This is just ridiculous!!! I bought my IPOD touch before Christmas and i still haven’t been able to use it!
    I've uninstalled and installed itunes and all that rubbish about 5-6 times now, i've deleted everything to do with Apple from my machine and also nearly killed my machine because i messed around with the registry (that's my fault :P)
    NOTE: I used IE 64-bit version to download the installer.
    Anyone have a solution to the problem?

  • When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home.

    When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home. I have already tried the following:
    turn wi-fi off and on again
    did a hard restart of my iPad
    reset network connections back to factory settings
    verified wi-fi is working as my computer accesses internet without issue.
    verified that my software is up to date.
    Does anyone have more suggestions?

    Couple of suggestions.
    First, many companies have a gateway on their networks that block non approved devices.  I work in such a place.  You might check with an IT guy , and see if they have a block in place.
    Second, the message you are getting means that you have not negotiated the security settings.  So either the password is wrong ( case sensitive), or, in some cases, they want a network key as opposed to your normal password.
    Again, if you can find one, talk to an IT guy and see if he has some suggestions.

  • Error message: X11 connection rejected because of wrong authentication

    Until recently I was able to ssh from the Mac in my office -- runing
    MacOS 10.6.4, to a Sun Solaris server -- running Solaris 10 10/09
    (update 8) and all available patches installed, and run X11 programs
    displaying on my Mac.
    I installed these patches recently:
    142900-15 SunOS 5.10: kernel patch
    124867-15 Sun Studio 12: Patch for C 5.9 compiler
    122212-42 GNOME 2.6.0: GNOME Desktop Patch
    138764-02 SunOS 5.10: acc driver patch
    120199-16 SunOS 5.10: sysidtool Patch
    119252-29 SunOS 5.10: System Administration Applications Patch
    124630-44 SunOS 5.10: System Administration Applications, Network, and Core Libraries Patch
    124628-10 SunOS 5.10: CD-ROM Install Boot Image Patch
    118777-17 SunOS 5.10: Sun GigaSwift Ethernet 1.0 driver patch
    121118-17 SunOS 5.10: Update Connection System Client 1.0.17
    144759-02 SunOS 5.10: mount patch
    145019-01 SunOS 5.10: ifconfig patch
    119313-38 SunOS 5.10: WBEM Patch
    124393-10 CDE 1.6: Dtlogin smf patch
    119278-37 CDE 1.6: dtlogin patch
    121734-13 SunOS 5.10: patch to support addition of new UTF-8 locales
    119254-75 SunOS 5.10: Install and Patch Utilities Patch
    118666-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25)
    118667-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25), 64bit
    121430-53 SunOS 5.8 5.9 5.10: Live Upgrade Patch
    119246-38 SunOS 5.10: Manual Page updates for Solaris 10
    121308-22 SunOS 5.10: Solaris Management Console Patch
    119315-21 SunOS 5.10: Solaris Management Applications Patch
    118712-24 SunOS 5.10: Sun XVR-100 Graphics Accelerator Patch
    144325-02 SunOS 5.10: Resource Management User Interface Patch
    145074-01 SunOS 5.10: Trusted JDS Help rebranding patch
    124457-03 X11 6.6.2: xdm patch
    and now when I try to run certain programs, namely Symantec NetBackup
    Server (NBS) administrator interface, jnbSA, when I run the program I see:
    X11 connection rejected because of wrong authentication.
    and jnbSA fails. I removed these patches:
    118666-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25)
    118667-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25), 64bit
    124457-03 X11 6.6.2: xdm patch
    with no change. I have made NO updates to NBS, and what's
    even more weird, regular X11 programs such as x{eyes,biff,emacs}
    work fine.
    I've tried tinkering with the contents of ~/sshconfig and /etc/ssh_config
    to no avail.
    Is anyone else seeing this problem?
    Any suggestions?
    Thanks!

    I'm confused why you posted on the Tarantella/SGD Forum then?
    Yes, you can use SGD to have your Mac client display back a Solaris/Linux/Windows/Mainframe, etc application remotely.
    http://www.oracle.com/us/technologies/virtualization/oraclevm/061996.html

  • My iphoto doesn't work, it just keeps loading and never works. what is wrong and how do i get it to load?

    my iphoto doesn't work, it just keeps loading and never works. what is wrong and how do i get it to load?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • HT1212 my iphone is lock because of wrong entering password

    my iphone is lock because of wrong entering password

    LOST PASSCODE
    You should be able to remove the passcode by restoring the device. Do the following:
    1. Connect the device to the computer to which you normally sync;
    2. Open iTunes (Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes" in http://support.apple.com/kb/ht1212 )
    3. Right-click the device in the left column of  iTunes and select Back up (read this article on how to restore http://support.apple.com/kb/HT1766 )
    4. When the backup is complete, select Restore
    5. When finished, restore from your most recent backup
    To restore read the restore section in this article http://support.apple.com/kb/HT1766
    If that doesn’t work you will need to perform a factory restore to remove it.

Maybe you are looking for