My nano is not being recognized by Itunes on Windows 8.1

I've changed drive paths and uninstalled and reinstalled I-tunes - still not recognizing my Nano, although Windows is.

iPod appears in Windows but not in iTunes 

Similar Messages

  • My Ipod 7th gen is not being recognized by itunes and Windows 8.1.

    Hello. My ipod 7th gen is not being recognized by itunes and Windows 8.1. When I connect my ipod to my computer, itunes will open automatically and a message bar below will appear:
    I have followed all the instruction in the support and itunes still unable to deted my ipod. The funny thing is, if i uninstall itunes, Windows 8.1. will detect my ipod but when itunes is installed, both itunes and windows 8.1. cannot detect my ipod. Thank you in advance for all your help.

    the message box says like this:
    An ipod has been detected but could not be identified properly. Please disconnect and reconnect ipod, then try again. If the problem persists, unisntall itunes then install itunes again.

  • Not being recognized by Itunes for Windows. 0xE8000001 Error

    not being recognized by Itunes for Windows. 0xE8000001 Error
    I get this message when trying to sync my IPOD Touch 16GB after upgrading to 7.5. I have tried to remove 7.5 and reinstall 7.4 and still the same problem. I have it connected to the USB on my motherboard. I have even changed the USB connection around. I have tried everything I can think of and all of the instructions I can find on this site. HELP!!
    Dmar

    Hey dmar713,
    The iPod touch requires USB 2.0, check the speed of the USB port.
    http://docs.info.apple.com/article.html?artnum=307091
    If the USB port is not causing the issue, it may be an application conflict.
    http://docs.info.apple.com/article.html?artnum=302538
    Jason

  • TS3716 ipod nano is not being recognized by iTunes.

    My ipod nano 2nd generation (and working perfectly) is not being recognized by iTunes.
    Any suggestions?

    Does the iPod work OK?
    Have you tied resetting the iPod? Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    Next would be to place the iPod in recovery mode and then restore via iTunes.  If iTunes does not see the iPod then the iPod is not usable. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • My Nano is not being recognized by itune or charging

    Someone please help my Nano is not being recognized when i plug in. Itunes or is not charging. I cannot sync or anything,

    Hi,
    I just bought my 2nd gen ipod 2 GB nano from someone who won it in a raffle. I plugged it into my computer and asked it to sync my songs. It immediately synced all 520 songs and startted charging. It says "do not disconnect". It has been charging for almost 24 hours now, and still says "do not disconnect". How long does the first charge take? Is something wrong?

  • IPod not being recognized by iTunes or Windows XP

    I just got a ipod nano for my birthday and I've been trying to set it up for two days, I've got the latest version of Itunes and I've tried everything I could think of and my Ipod is still not being detected by my computer or iTunes. When I plug it into my usb port, it starts to charge but nothing else happens, can someone please help me?

    To resolve this issue i unistalled Itunes and quicktime, then looked for diffrent USB ports once found I put iPod nano in and re-installed Itunes and quicktime

  • IPOD TOUCH  4G IS NOT BEING RECOGNIZED BY ITUNES NOR WINDOWS 7

    Hi... I have been using my new ipod Touch 32G  4G for almost two months now, and It has been working great... but for an unknown reason my itunes 10.4.10 (I use a PC with Windows 7 ultimate 32bits in it) stoped recognizing it, and so has my PC... when I plug the ipod to my computer, if I have itunes open, it freezes... if I unplug the Ipod, it start working ok ( I mean itunes)... and once I plug the ipod to the computer it recognizes it as a camera device.. and if I look for it it wont show in (My Computer)... As I said... this happened just a few days ago... it was working OK before... I have re installed several times the last itunes version and even though it works with out the devices conected... once I connect any apple device ( ipod Touch 2G, ipod Touch 4g and an ipad 2G) it wont recognize any of them... the ipods frezze itunes, the ipad doesn´t frezze it, but It doesnt show there either...  What could have happened ?  What should I do ?  I have checked the drivers, uninstalled and installed them again, I have unisntalled and installed itunes several times now, i have tried the devices in other computers also with Windows 7 and they are working OK, so its itunes so is not the cable nor the ipods or ipad...
    I dont know what else I can do ...
    Would someone please have any ideas on how to solve this ?

    I had the exact same problem...and literally, even after calling Apple Help this morning and them emailing what was supposed to fix it, I was still stuck in the same boat. However, after much searching, I found a post on the internet, did what it said, and, as of this morning, my iPod, and my kid's iPods, are now recognized.
    Since the most recent iTunes update none of our iPods are recognized by iTunes. Our PC is smart enough to recognize my iPod, but iTunes is not.
    After MUCH aggravation....AFTER trying all the fixes outlined by Apple Support, AFTER contacting Apple Help and doing what they said, NOTHING WORKED.
    I searched the internet again and found the simplest of instructions. They explain that with the new iTunes update some iPods are being recognized as digital cameras rather than iPods, which mine was doing. This is how I fixed it. Do not have iTunes open.
    Attach your iPod to your computer.
    1. Open the Device Manager. (To do this right click on My Computer or Computer, click on Properties, and then click on Device Manager).
    2. Find your iPod. Normally it will show up on it's own, but since your computer is recognizing it as a digital camera it may be under something else; mine was under Portable Devices.
    Even though it is saying drivers are up to date based on all Apple Fixes, you DO HAVE TO MANUALLY UPDATE DRIVERS...and this is what you have to do!
    3. Select the Apple iPod by double clicking on it when you find it.
    4. Select Driver on the tabs and click on Update Driver.
    5. Choose Browse My Computer for Driver Software. Once opened, you must locate this file: Program Files\Common Files\Apple\Mobile Device Support\Drivers. Select that folder and Click Next. Once the update is complete, unplug your iPod. Wait 30 seconds and plug it back in...your computer should now recognize the iPod.
    To whoever found out about this fix and posted it online, THANK YOU!!! I have spent hours and hours following Apples advice to no avail...but this fix, posted online by someone else, DID work...so thank you for posting it...and I am just passing it on!
    Let me know if it works for you...it takes all of 5 minutes and it worked for me this morning!

  • IPhone Model A1203 is not being recognized in iTunes using Windows XP on a Dell Dimension 4100. How to get drivers to get the device recognized?

    I downloaded the latest version of iTunes to Windows XP then connected my first generation iPhone to the different USB ports available on the Dell Dimension 4100, not one of them allowed the iphone to be recognized.  The Troubleshooter did not locate drivers other than what are already in the system.  Is there a work around?  Is it the iphone or Windows XP?  Where do I locate drivers?  Why can't my devices just get along?

    I downloaded the latest version of iTunes to Windows XP then connected my first generation iPhone to the different USB ports available on the Dell Dimension 4100, not one of them allowed the iphone to be recognized.  The Troubleshooter did not locate drivers other than what are already in the system.  Is there a work around?  Is it the iphone or Windows XP?  Where do I locate drivers?  Why can't my devices just get along?

  • My ipod nanos are not being recognized in iTunes. I have tried everything! Changed the drive letter, the disk to FAT32, resetted it, downloaded itunes again, but nothing has worked! HELP please.

    Somehow my nano now lost all its music so now its empty!  Also, before windows used to recognize my ipod and i'd get a pop up saying "open to view files" but now I don't even get that anymore. I have also tried syncing it by putting them in disk mode but NOTHING has worked. I am getting so frustrated.
    I followed all of the "steps" on the apple support page but none of that has worked too. PLEASE help me because I literally feel like just throwing my ipods out the window. I never had this problem before.

    When you connect your iPod to your PC, what appears on the iPod's display?  Does the iPod charge when you have it plugged into the PC?
    Are you running the latest version of iTunes (10.6.3)?  It wouldn't hurt to also make sure your Windows OS has all of the latest patches and updates as well.
    I assume you have plugged the iPod ino different USB ports located directly on your PC and tried using another 30 pin dock connector cable to rule out the possibility of a bad cable?
    B-rock

  • Iphone not being recognized by Itunes for Windows. 0xE8000001 Error

    I am trying to upload some music on to my new IPhone, every time i connect my iphone, itunes does not recognize it. I have the latest version of ITunes 7.5.0.2. I reinstalled itunes several times, restarted Apple Mobile Device Service serveral times but still no luck. Please Advise.

    I had the same exact error. I am from the US and don't have any jailbreak crudy on my phone.
    I fixed the problem by resetting and erasing the phone; shutting down the Mac; Resetting NVRAM (boot->CMD-O-F, 'reset-nvram', 'shut-down'); Resetting PRAM (boot->CMD-P-R, hold until it starts booting); load up iTunes; restore iPhone backup.
    Do you have to go through all these steps? I don't know. But this worked for me.
    EB

  • My ipod nano is not being recognized by my laptop

    dear apple community users,
    when i connect my ipod nano to my lapto (hp) it shows the charging sign but it is not recognized by the laptop.
    i have tried turning it on and off may times but has not helped
    i have the latest version of itunes on the laptop but due to this problem i am not able to sync the music files from the laptop
    plss help and reply asap

    Good Morning lavanyaroy,
    If your iPod nano is not being recognized by your PC or iTunes for Windows, follow the detailed instructions in the article below:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    http://support.apple.com/en-us/HT204095
    All the best,
    Judy

  • My ipod nano is not being recognized by any power source:(

    My computer and power cord for electrical outlet is not causing any response from my ipod

    Good Morning lavanyaroy,
    If your iPod nano is not being recognized by your PC or iTunes for Windows, follow the detailed instructions in the article below:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    http://support.apple.com/en-us/HT204095
    All the best,
    Judy

  • Why isn't my iPod 6th generation not being recognized by iTunes?

    Why isn't my iPod 6th generation not being recognized by iTunes?

    Did you alresady try these suggestions? iPod not recognized in iTunes and Mac desktop and iPod not appearing in iTunes

  • HT1369 Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed and mobile programs associated with my non apple cellpho

    Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed any mobile programs associated with my non apple cellphone. This seems to have started happening after the last Itunes update I did as I was able to put music on my ipod touch a month or so ago. Is there some way to go back to an older version of itunes? I really have no idea what else to do since I followed every step on the trouble shooting page for windows 8.

    I had this problem too and my roommate solved it!
    Go to 'Settings'
    'Music'
    Scroll to the bottom and enter your password to log onto your home sharing
    Then connect to iTunes and sync!

  • IPhone not being recognized by iTunes

    My iPhone is not being recognized by iTunes. I have iPhone original version with the latest software OS update. The phone was reset because of unrelated problems, and I need to connect to iTunes for it be operational! iTunes 9.1 on my computer... my iPad syncs with no problem but the iPhone is not even showing up as a device on the iMac or MacBook!
    I have followed the steps on the Apple Support website, but the problem persists. What to do next?
    thanks

    Your computer detail provided indicates you have a Mac and the link you provided is for Windows - at least for the software conflicts portion the link went directly to, although some of the troubleshooting steps are similar.
    Here is the link for OS X.
    http://support.apple.com/kb/TS2050

Maybe you are looking for

  • HOW CAN I ADD/UPDATE/INSERT IN A USER TABLE WITH MATRIX

    Hi All, I have one User table (Defined as No Object) and what i need to do is a form with a matrix to Add/Update/Delete data in my user table. I already create the form and the matrix that already give me the user table data. But now i have several p

  • Z_Dialog prog initial input screen-looking like selection screen of Report?

    Hi Experts, In internet, I found 2 screens( code is not mentioned there) and mentioned that, they r Dialog Prog. screens, they r as below, 1 - Initial input screen-programmer mentioned it as a selection screen-1000 2 - Output screen in ALV grid (Obje

  • Define an applicant activity in SPRO

    Hi All, Can anyone please advise if we can delete the existing (standard) applicant activities in SPRO and modify the existing one ? e.g. After we do initial data entry action in PB40, the planned activity: WW-RECEIPT automatically gets created. It h

  • Call BAPI from VBA (access 2007)

    Dear Experts how can i call a BAPI from Visual Basic (in MS Access 2007) i want to call the BAPI  -> BAPI_SALESORDER_CREATEFROMDAT1 please help

  • Text knockout CS4 - white text on black urgent

    I am having problems with some white text (converted to paths) which is placed on a black background.. When viewing the pdf in Illustrator (CS4), the text shows up fine. When viewing in Acrobat (which the printers will print from), the white text has