My nano stays on the "Do Not Disconnect" screen...

Hello,
Recently my 1GB nano has been having problems plugging into my computer. When I plug it in, the "Do Not Disconnect" screen comes up but just freezes there. The computer nor iTunes realizes it's there either. I have to unplug it while the screen is still there and reset it. I know the iPod WORKS, since I play it on the docking station I got for Christmas.
This started happening a while after I got iTunes 7. I figured updating it was the problem, so I went back to 6, but apparently that didn't work either. I'm not sure it's the computer, since my friend's 30GB iPod showed up in Explorer (although apparently it needed iTunes 7 to work, so I'm not 100% positive on it yet).
I've just redownloaded iTunes 7 again, but the problem persists... It's making me really angry because I can't put any new music onto it. If anyone can help I'd be SOOOO grateful. ^_^
- Kuro-sama
Windows XP
  Windows XP  

Ok, my friend brought over his 30GB again, and he updated it with some stuff I have on my computer. That means it has to be something with my nano, right? It's really confusing me and I want it fixed...
Someone please help. ;_;
Windows XP

Similar Messages

  • Nano is stuck in the "do not disconnect" screen while unplugged

    i have been using my ipod nano for about a year and a half and i just connected it to update it, but itunes didnt respond for a while i tried disconnecting it but it doesn't work and now its stuck in the do not disconnect screen and it is unplugged. I've tried all the buttons, reconnecting it and the hold button but it still wont respond.
    What can i do?
    ipod nano   Windows 2000  

    Reset the iPod. (hold down the menu and center button). If that doesn't work, try a restore with the iPod updater.

  • How long does it take the 'Do Not Disconnect' screen to disappear?

    How long does it take the 'Do Not Disconnect' screen to disappear?
    I Just got my ipod nano a week ago. I put maybe 10 songs on there and then today, since I had some time, decided to start creating my library. By the time I decided to stop and plug in my nano so it can update, i had like 219 songs that had to be transferred. I watched each song on iTunes go to the ipod like usual and then my list that comes up when you select "__ ipod" is all grayed out like it's still updating. On the top of the iTunes screen, it says ipod update is complete though, and of course, my ipod has been saying do not disconnect for the past hour and a half with the battery fully charged. Does it really take that long for it to finish synching my songs? I mean I know I had a lot of songs to put on there put geez!

    Hi CocoaVixen718
    Welcome to Apple Discussions
    Try ejecting your iPod from iTunes. You might want to look at Knowledge Base Document #61685 about The "Do Not Disconnect" Message and Knowledge Base Document #93492 explains How to Safely Disconnect the iPod.
    Jon

  • Please Help me! I am stuck on the "Do not Disconnect" Screen!

    I Unplugged my Ipod Nano from my computer! and the Do not disconnect screen still shows! I have tried everything! Please help!!!!

    Same problem--please let me know how to fix this. I
    have reset Ipod, Updater says there is an internal
    error. Don't know what to do!
    Have you seen this?
    iPod Updater for Windows: "Internal manager error" occurs when restoring or updating iPod
    btabz

  • My ipod classic froze in the 'do not disconnect' screen.

    I connected my ipod to my computer, and it showed the do not disconnect screen as it always does, but it froze on that screen.
    Itunes is not recognising my ipod, and the ipod is doing nothing, even showing the little lock sign if I lock it.
    What do I do?

    Try holding down menu and the center button for a few seconds, until the apple symbol appears. This has always worked for me

  • My ipod is stuck on the do not disconnect screen

    I recently found an ipod and i plugged it in to my computer because my mom has an ipod already. After plugging it in it went to the do not disconnect screen. its been stuck this way for 2 days. Is this because my computer does not recognize this new ipod or what any advice..........

    Try holding down menu and the center button for a few seconds, until the apple symbol appears. This has always worked for me

  • IPod is not responding n hang at the "Do Not Disconnect" screen

    i've tried to connect my ipod to my macbook this morning n it got hang on the "Do Not Disconnect" display. there is also no sign of connecting to my iTunes when i plugged in to my macbook with my ipod..it just stays still on that "Do Not Disconnect" screen..is there any way or solution to this matter?

    I have the same problem, Got the iPod today, and it wont import my files but a few of them, it just hangs on "Do Not Disconnect" screen, sometimes crashing the computer while trying to eject it.
    Does anyone know whats going on or if the iPod is broken?
    I'm running on version 10.4.9 and the iPod has been updated as well.
    Thanks in advance for any help.

  • What happens when my ipod classic 5th generation is stuck on the do not disconnect screen?

    first you must connect it to pc or mac, then attemptto reset once that happens it should come back up and only when the red circle blinks then it will show up on itunes display again, then you push eject wait till regular ipod screen come up showing music, videos, etc, then you take of ipod usb.

    Try holding down menu and the center button for a few seconds, until the apple symbol appears. This has always worked for me

  • Do Not Disconnect Screen is Stuck

    I recently reset my ipod, and now when i connect the ipod to the computer via the USB hookup the do not disconnect screen comes up and freezes the ipod, it is not blinking like it normally would when updating songs or anything. Also, if I unplug it , it still stays on the Do Not Disconnect screen. Itunes will not recognize the ipod. Anyone have any ideas how to fix this

    morning!
    ok mine has done similar after a restore;
    restore etc etc etc, connect to the 'puter, locked on do not diss, but not in itunes!
    i went to my cmputer after closing itunes, found it sitting there ejected it, opened i tunes, preferences advanced and found it was in disc mode! disabled disc mode and all ok!

  • My Ipod 30gig is stuck in the "Do Not Disconnect" mode

    i plugged it into my macbook pro, and noticed after a while that my ipod never mounted. i looked at the ipod screen and it was in the "do not disconnect" stage. so i waited. then i went to "file" then "sync to my ipod" but the option was grey'ed out. so i restarted my computer. the ipod just stayed in the "do not disconnect" mode as the computer rebooted, and did not mount. none of the ipods buttons do anything. it does not go to sleep.

    Argh, mine does that too. I would also really love a solution on this one, so therefor i'm bumping this thread

  • Anyone else tired of the "Do Not Disconnect"?

    Is it just me or would many of you like myself like to have an ipod update that changes the "Do Not Disconnect" screen to a nice progress bar.
    I dont know about you, but I think this would solve a lot of problems. Just think of all of the users disconnecting before the screen even changes. Perhaps if there was a progress bar, users would be able to see an estimation of the time remaining.
    This is a Very needed update.

    I do not believe that you fully understand what the 'Do Not Disconnect' message means in all cases.
    If you use your iPod with Disk Mode Enabled, then the 'Do Not Disconnect' message will be present on the screen even if there is nothing being transferred to it at the time. It will remain on the screen until you manually eject it.
    A progress bar would be useless in this regard, since there is no progress to monitor.
    The 'Do Not Disconnect' message works perfectly as it is. I do not see any reason to change its behavior.

  • Frozen "Do Not Disconnect" Screen

    Hey guys I need some URGENT help:
    I recently "ejected" my ipod from my pc but what happened is that it took ages for "My Ipod" to disappear from my iTunes and it ended up having an error on my PC saying that the drive wasn't ejected successfully and that files were not saved. This however, isn't the main problem.
    When I unplugged my ipod from the USB wire, the "Do Not Disconnect" Screen stays there. I can't reset my ipod or anything. None of the buttons work. I try replugging it into my PC again and ... nothing.
    Can anyone help me out here? Would I need to bring it to a Service Provider?

    Did you try restoring it? As it restores it it makes the ipod go threw a diagnostics test and restores it to the factory settings. THis is what you have to do. 1. plug in your ipod. 2. go to the ipod updater. ( it should be in the start menu)3. it should reconize it and then you press restore.

  • Ipod is frozen on do not disconnect screen....

    i seriously don't know what to do with m ipod anymore. it's a 5 gen ipod video that i've had for less than a year. today i tried to sync it to my computer which is a sony vaio with windows xp and it got stuck on the do not disconnect screen. i plugged the ipod in and waited for itunes to open, which it didn't(i waited a long long time). so i then shut down my pc thinking the do not disconnect screen would go away after the pc was shut down...but it didn't. i tried rebooting my ipod MANY times and that didn't work. I tried plugging it in different usb ports on my pc and it doesn't show up in itunes. it shows up in my computer as a 'removeable disk' not an ipod as well. i don't know what to do...all i wanna do is format it back to factory settings so i can use it on my new pc(a brand new imac..<3) does anyone have any ideas? thanks.<br>
    Imac   Mac OS X (10.4.9)  

    Even when its not connected..I went through the same thing my Ipod freezes alot(5thgen) nor will it show vidoe or pics not even podcast. What I did was got a programm call TUNE TRANSFER FOR ipod. With this you can backup anything on your ipod so you can then restore it. During a freeze your computer doesnt recognize the ipod at all.No connection. You need to reset your Ipod but not traditionall. 1- toggle hold switch 10 times each direction.(left/right)immediatly after your last toggle(be sure the toggle isnt on hold)
    2-hold menu and select buttons for 15 seconds toggle periodically. I hopes that helped if not messege me back. make sure you have the latest Itunes.
    GOOD LUCK

  • 5th Gen iPod freezes on "Do Not Disconnect" screen when connected to Mac

    My iPod freezes on the "Do Not Disconnect" screen (partially backlit) when I plug it into my computer. I have a G4 eMac with standard USB connections. The ipod firmware is up to date.
    This freeze doesn't occur ALL the time....just occasionally. The iPod does not appear on my desktop or in iTunes when this happens. I have to wait until the iPod discharges its battery completely before I can use it again (this sometimes takes a couple of days!).
    Does anyone have any ideas? Or is anyone else experiencing this?
    Thanks....
    G4 eMac 700mhz Mac OS X (10.4.9) 768 MB RAM
    G4 eMac 700mhz   Mac OS X (10.4.9)   768 MB RAM

    Thanks for the replies.........I can't seem to find a solution to this....its annoying to say the least. Its just happened again this morning, though it's successfully sync'd on the last few occasions....it seems to be quite random.
    One thing I've noticed is that it synced OK when iTunes wasn't open when I plugged it in. It appeared on the desktop, then I opened iTunes. This morning though it froze when iTunes was already open, so there may be an issue with iTunes (I updated this weekend to see if it was any different with the new version). I guess this will happen if you've got the ipod set to open iTunes automatically when connected too.
    So, no solutions as yet.......I'm gonna get onto Apple to see if they have any answers. I'll get back to you all on this one.
    PS: why no firewire capabilities on the new ipods?
    G4 eMac 700mhz Mac OS X (10.4.9) 768 MB RAM

  • Do not disconnect screen is frozen on my ipod

    I have a video IPod 30G. I got a new computer and I downloaded the new itunes 7.0. It recognized my ipod but it would not let me add my current 1800 songs to the library. I ejected my ipod on itunes several times and nothing happened. I went ahead and disconnected my ipod from the usb connector like I've done before and now it froze and the wording "do not disconnect" is frozen on the bottom of my screen. I tried to reset it, but it's still frozen. I tried to connect it back again and now it's not recognizing my ipod in itunes or my computer. When I do connect it, it does not regcognize my device? I ran a diagnostic through itunes and it shows that there is a connection problem w/ my ipod. What can I do? I've tried to turn it off and on and nothing is working. Please help!!

    I drained the battery, and the "do not disconnect" screen finally came off.... I must have reset my ipod, I lost all my 1800+ songs,. But I have a new problem, when I connect it to the usb port, itunes opens up but has an error message saying to go to the summary preference and select restore to factory setting??? I don't show that anywhere in my IPOD, where is the "summary" icon? My computer can recognize it as a drive but itunes can't...what do I do now..?

Maybe you are looking for

  • Is there a way to stop downloaded files from automatically opening?

    When I download unarchived image files through a web browser (eg: from yousendit) they automatically open up in Preview.app. I thought this was an annoying Preview thing so I changed my .tif and .jpg files to open with Photoshop...which now launches

  • Payment cards

    PAYMENT CARDS every time i order one the order dissapears and i dont recieve it .direct debit is not easy for us i have to keep altering the payment date to often ,i was told that a payment card was the best option for me .is there somthing wrong wit

  • Uploading data from tally

    Hi we have implemented SAP at our HO and rest of our locations are using Tally. Can i upload tally's trial balance in SAP at our HO for MIS purpose and also it should not affect my current SAP balances I will be taking out Profit & loss  & Balance sh

  • Help! Swing freezes

    Hello, I developed several applications using Java V1.4.0. All apps were running at its best. Now I switched over to Java V1.4.1 and all Apps using Swing components (especially JList, JButton, JTextArea, ...) are freezing now. In Detail: I have an Ap

  • I'm unable to connect to iTunes store..........

    When trying to log on to the iTunes store I get the following error "iTunes could not connect to the iTunes Store. The network connection timed out. Make sure your network settings are correct and your network connection is active. then try again" Ca