My nano will not turn on

My nano will not turn on

Hey sach61!
I have a link for you that will help you troubleshoot this issue with your iPod nano. This page is a repository for helpful troubleshooting articles about all generations of iPod nano, just choose the one that most closely resembles yours and follow the troubleshooting steps:
Apple - Support - iPod Troubleshooting Assistants
https://www.apple.com/support/ipod/five_rs/
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Similar Messages

  • HT1369 The screen on my Ipod Nano will not turn on?

    The screen on my Ipod Nano will not turn on.

    my iPod nano 7th generation dose not turn on even when its fully charged I've held down the home and the power of button for about 20 seconds but still nothing I brought this 22nd of February 2014 somebody please help

  • Ipod nano will not turn on

    HI my daughter has a brand new ipod nano, it will not turn on at all and is now not being recognised when the usb is connected to the pc?
    i am not very technical and would appreciate any kind of suggestions as to how i can solve this problem.
    many thanks

    If your iPod is still under warranty, you might want to take the iPod to an Apple Store, or send it in for service:
    iPod Service
    -Kylene

  • Ipod Nano will not turn off

    My ipod nano will not power off. Even the sleep button does not work. I have reset everal times. Any thoughts?

    I've been through 4 of those R's, as well as the Quick Fix and about 5 hours on the phone with Apple. It will now turn off, but it is still not visible to iTunes and the iPod updater won't run because it also can't see the iPod. Windows sees it just fine, so now I'm awaiting a 3-5 day response from an Apple engineer about what is wrong. This all started when I installed the 6.0 update. I'm now back to the older software, but it still won't reconize my iPod, so therefore will not update it with new songs, etc.
    Thanks for your reply.

  • External volume on 5G Nano will not turn off

    External volume always stays on, will not turn off on 5G iPod Nano, even when headphones are plugged in.
    Went through the 5 R's (Reset, Retry, Restart, Reinstall, Restore).  No change.
    Could it be a defective volume control?

    I had same problem - I reset options, etc.
    FINALLY, after reviewing this discussion and going to the link as was suggested, I called Apple. The tech guy suggested making sure it was not on lock (on top) which it wasnt' and said to press Menu and Middle circle button (as opposed to Play/pause) at same time and apple logo should appear. It did, and then it unfroze and let me turn it off finally!!!
    He thought problem occurs when you leave it on too long.
    He suggested NOT to reset options else you'll lose your playlists (at least until you sinc up with your itunes.
    Hope this works!!

  • Black screen my i pod nano will not turn on?  should be charged

    my i pod nano 7th generation has a black screen and will not turn on  HELP?????

    Hello gatormother,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting it while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Home button for at least six seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    Have a nice day,
    Mario

  • My iPod nano will not turn on no matter what I do.

    I tried holding the play button to turn it on. I tried charging it for a couple of hours. I tried resetting it. I tried plugging it into my computer. None of this made it turn on or even make a flicker of light. What should i do?

    The iPod will need to be serviced, to determine the exact fault and repair it (if possible).  You can get the current 7th gen iPod nano as an Apple-certified refurb for $99 (with a one-year warranty)
    http://store.apple.com/us/browse/home/specialdeals/ipod
    so the cost to repair your nano may not be economical.  If you are the good at such things, this web site has DIY repair guides
    http://www.ifixit.com/Device/iPod_Nano
    Be sure to rule out the other possibilities.  If you have an Apple Store nearby, you can make a reservation at the store's Genius Bar and take it there (along with your docking cable).

  • My iPod Nano will not turn on.  The screen is always dark.

    For no apparent reason, my 4th Generation Nano stopped working.  The screen is dark and when I attempt to plug it in to my computer, iTunes does not 'see' it.  It will not take a charge if I plug it directly into the wall.  Is there a way to reset it or am I missing something other than bringing it to an Apple store?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My Ipod nano will not turn on

    Yesterday mt Ipod nano was working, today it has no power, will not charge and even when plugged into my computer, Itunes does not acknowledge it.  I think it must kaput.  It is only 3 months old, it wasn't dropped or anything.  Any suggestion?

    i am having the same issue have tried holding down the power button to reset but it isn't even bringing up the loading circle let alone the apple logo, the last time i used my ipod it was fully charged as well. this is frustrating as i got this for a christmas present due to my last one wouldn't hold it's charge it would fully charge then last 5 mins and die. (it is 2 years old though). my computer doesn't read the nano 7th gen and tells me that is an unknown device and to reset it and if this doesn't work to replace it.

  • NANO WILL NOT TURN OFF!!

    Please help - Everything works fine with the Nano when it is connected to laptop. When not connected, all works but it can not be turned off - only put in pause. If I connect back to laptop, I can turn it off just fine. I have reset, restored, etc. with no luck. Please - any help out there??

    Hi DHNano,
    Since you've already done a restore, then skip the following steps.
    1. Press Menu
    2. Select the 3rd item from the bottom of the list which is "Settings".
    3. Scroll all the way down to the bottom and select the last item which should be "Reset All Settings".
    4. Then select the second item which is "Reset".
    Leave your iPod on overnight until the battery is fully drained. Sometimes this may reset other things. Then plug your iPod to your computer for at least three hours and let us know what happens.
    If the condition still exists, then the only alternative would be to visit the nearest Apple Store:
    http://www.apple.com/retail/
    ...or have your iPod serviced:
    http://depot.info.apple.com/ipod/
    Gary

  • My 7th generation iPod nano will not turn on or be recognized by my computer.

    I have plugged it into my computer. Nothing. Blank. Computer says it can't read the USB.
    I update the version of iTunes. Nothing. Blank.
    I hold the power button. Guess what? Nothing. Blank.
    I've only had this iPod for a couple weeks, and I have not had any problems before.

    If this is the case, I suggest you return the unit and ask for a replacement. Cheers!

  • IPod nano will not turn on, charge, reset, anything

    I charged my ipod for 2 or 3 days, because I forgot about it. Then when I got it off the charger it would not do anything. I also noticed that I had left my earbuds in the headphone jack during that time as well. Did this ruin my ipod? I've tried resetting it several times, charging it up and then resetting it and nothing happens! Is my ipod done or is there something else I can try?

    It very well sounds like the iPod's is completely shot, no longer able to build or retain any sort of charge.  Might be a good time to start saving for a new one.
    As for the paid music, you should be able to download most of it again at no cost via iCloud.  See this article for more information and assistance.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    B-rock

  • Ipod nano firewire error and will not turn off! PLEASE help

    I am having the exact same problem as I see may of you unfortunate Apple users are. I am receiving the error message about firewires and I have never used one. The nano will not turn off and I have to let the battery run out. The play/pause function works perfectly fine, but not to turn off the nano. The sleep function does not do anything either. I am so disappointed with Apple because they would not help me on the phonbe since it is well past my first 90 days of ownership. I may have gotten a single drop of water on it, but that was about 2 weeks ago, and still having the same problems. I don't know what to do, but I see that Apple has gotten mighty rich off of their JUNK products! Anyone out there, help me please!

    Do a reset.  You will not lose any data: Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If this does not help resore from a backup.  See http://support.apple.com/kb/HT1414
    Lastly try restoring to factory settings.
    If none of this works, it's probably a hardware problem.  Make an appointment at the Genius Bar of your Apple store.  You are under warranty and they will fix or replace it on the spot.

  • Ipod nano not recognized by pc and will not turn on

    ipod nano not recognized by pc and will not turn on

    iPod not recognized in 'My Computer' and in iTunes for Windows 

  • My ipod nano (3rd gen) will not turn on at all.

    I
    have hooked it up to all the power adapters and tried resetting it but nothing has been able to turn it on....it was working just fine before I didnt do anything to it....it just stopped working....it kept saying that is was dead and needed to be charged and i pluged it in and it continuously restarted itself and repetedly...then i just let it die but now it wont turn on. I need help it is the only ipod i have. what do i do??

    Hello, Beachbabe1-0.  
    Thank you for visiting Apple Support Communities.  
    I understand that your iPod nano will not power on and you have tried some troubleshooting steps already.  There are just a couple more troubleshooting steps in the link below.  
    iPod nano (3rd generation) Troubleshooting Assistant
    Cheers, 
    Jason H.  

Maybe you are looking for

  • 0x0000007B error message after installing Portege R500 XP OEM Recovery CD

    I have a R500 with 64 GB SSD and Vista preinstalled. I try to downgrade Vista with a R500 XP Pro OEM Recovery CD. Decompression to the SSD works fine - but during the first initial XP Pro boot I receive a blue screen with a 0x0000007B error message a

  • Canon IR Adv 7055 PPD?

    Hello All. I've been having a problem with my new iMac running 10.6.4 in regards to our Canon IR ADV 7055. I can NOT get the printer to pull from the manual paper feed (ie: bi-pass). I've tried multiple installs of different PPDs and just can't seem

  • Can i get reimbursed?

    a while ago i purchased adobe CS6 production premium which included: adobe premiere pro CS6 after-effects CS6 Photoshop CS6 Extended adobe audition CS6 prelude CS6 illustrator CS6 speedgrade CS6 encore CS6 flash Professional CS6 bridge CS6 media enco

  • Posting to QM stock while goods receipt

    Hi What are all the options we have to post the goods to Quality stock category at the time of goods receipt? I know off A. In material master, purchasing view - post to inspection stock is active B. If QM control key is active What are the other pos

  • Why does ical delete my past events when all settings indicate that it should not?

    All of the boxes, about deleting past events, in ical preferences are unchecked, so I can't figure out why ical deletes my past events.  Could it be because of a setting on either my iphone or ipad causing this to happen?