My Neo 875P NB fan.. stops flashing :X

I have a 875P Neo-LSR with that wonderful disco NB fan. It's been working fine for a month or more now, until the other day I noticed it was, well, "stuck" on blue. I power cycled a few times, but the blue led would stay solidly lit (obviously, not when the power was off, though).
I pulled the plug from the power supply and let it sit for a minute or two, and it started flashing like normal again when I powered back up. However, I just looked at the fan a few minutes ago, and now it's stuck on green. Again, solid without flashing.
I'm not quite sure if I'm lucky or not, considering how many people hate the flashing.. I should mention, though, that the fan itself continues to work fine, even when the leds get "stuck".
If anyone has had this happen to them, though, I'd be interested in hearing it.
PH

Most of the time it work and sometime it doesn't or gets stuck. I don't know how it generates the flashes but it appears to work off of some contacts within the fan.
I am sure for those who have a windowed case, it cool for a few days, then annoying after that.

Similar Messages

NEO 875P blue screen stop errors.

i am getting nothing but stop errors, i have owned my pc for less than a 2 month's and have had these errors.
0X000000D1,- which is logitech mouse....
0X00000008,0Xf77c6d70,- which microsoft dont have a clue....
0x000000D1, (0X0CC483FF, 0X00000002, 0X00000000, 0X0CC483FF)-WHICH IS SOMETHIN ABOUT HT.
0x0000007f,
and many many more..
now my hdd is trashed, and i can't get my pc to run with ht enabled, which means i wasted more mony on a fancy gizmo which does nothin.
as for my mobo, i am sure it is lovely, but now i hate it.
i wish i had bought intel's 875 so i could complain at them, but it is microsoft's fault.
i hate them, and all the little beggers who go around infectin xp machines, give me an adress so i can go and kill one of em...
sorry for rant, but this really is the end...

Quote
Originally posted by daffy the red
i am getting nothing but stop errors, i have owned my pc for less than a 2 month's and have had these errors.
0X000000D1,- which is logitech mouse....
0X00000008,0Xf77c6d70,- which microsoft dont have a clue....
0x000000D1, (0X0CC483FF, 0X00000002, 0X00000000, 0X0CC483FF)-WHICH IS SOMETHIN ABOUT HT.
0x0000007f,
and many many more..
now my hdd is trashed, and i can't get my pc to run with ht enabled, which means i wasted more mony on a fancy gizmo which does nothin.
as for my mobo, i am sure it is lovely, but now i hate it.
i wish i had bought intel's 875 so i could complain at them, but it is microsoft's fault.
i hate them, and all the little beggers who go around infectin xp machines, give me an adress so i can go and kill one of em...
sorry for rant, but this really is the end...
I understand you... I have almost the same errors... only difference is I have 865 PE board.
I just CAN'T make this board stable.
I can almost asure you your memory modules are right, I tested mine and they were OK.
where you say 0x00000008 you mean 0x0000008E? because that's the error I was getting sometimes.
I disabled shadow and caching in bios but that didn't work.
I have other PC in my home with an intel 875P board. It never crashes. So I still don't know if I have to blame the board or my vga card or what...
I am so tempted to buy an Asus P4P800...

Unclocked NEO-875P FIS2R reliability

First of all let me say hellow to the boards, Ive alwayse been a fan of MSI but from what I've read so far about the CORE-CENTER and BIOS problems i plan on leaving my system untouched till i hear better...
CLIFFNOTES-How is the reliability and performance of an unclocked NEO-875P FIS2R????

I'm running un-oc'd too, and I haven't had any problems. Smooth sailing with Bios 1.2. Was smooth before I flashed to 1.2, too. I've resisted flashing to 1.3 or 1.4, even though I'm tempted, because everything runs fine as is. Things aren't perfect (the very very very occasional crash occurs, and things you wouldn't expect to be wonky sometimes are, such as occasional DVD-ROM drive problems, speaker problems, network problems, or vidcard problems, butI don't think that these are on account of the mobo). Really, though, everything pretty much works as expected, looks reasonable in SiSoft Sandra (in terms of performance), and is more stable than my previous Win 98 SE/ASUS A7V installation. Only unfixable problem I've had is the software that MSI provided w/ the board is all deadly. It doesn't work at all. The utilities disc won't run, and programs installed from it (through Windows Explorer) have bad hang and crash problems. Otherwise, all is well.
Nevertheless, I CAN'T WAIT for the day that MSI supplies a stable BIOS that everybody loves, that is 100% proven to make the board do what it's advertised as being able to do. The same goes for their CoreCenter software. It doesn't work for me now, but I'd love for it to be able to.
Anyway, I expect to live w/ the board as is for a while. I'll drop in a Prescott CPU next year, stick w/ my Audigy 2 and All in Wonder cards and my 1 Gig of Corsair PC3200 LL DDR DRAM for a while, and I don't expect to have to upgrade otherwise for at least 3 years from now. Hopefully, this setup will keep me running the latest and greatest software with above-acceptable performance through then.

Dual Channel memory problems on Neo 875P

I am having considerable trouble getting the NEO 875P to work with dual channel DDR400 DIMMs. I have two Kingston KVR400X64C25 DDR400 256MB memory modules, each of which works correctly by itself. However, once I move one
of the modules to channel B, I cannot boot my operating system (currently Windows XP.) The problem also occurs in Windows 2000, which I also have on the system. I receive blue screen errors that indicate paging/memory problems. I have upgraded my BIOS to the latest version (1.3)* in the hope that it would solve my problems, but it has not. The POST screen detects that there is 512MB of memory working in Dual Channel mode, but even when it does get through the O/S booting process (rarely), it crashes within minutes. Putting just one of the chips in makes the system perfectly stable. If anyone has any information, please let me know!
Thanks,
Jim Keller
http://www.centerfuse.net
* My board was dead after trying to flash the 1.3 BIOS, but after about 10 attempts of using CTRL+HOME method to recover the BIOS, it finally worked with version 1.0. I then re-flashed with 1.3, and it rebooted fine. Are there any updates about all of the problems with v1.3 ?

>I can only answer based on what I've read on this forum
I figured as much, I was just wondering if you knew whether MSI themselves frequents the forums or answers emails sufficiently.
I've had an interesting development though. I stumbled upon Tom's Hardware Guide's article about 875P motherboards at http://www17.tomshardware.com/motherboard/20030519/i875p-01.html
They mentioned that they needed to increase the memory voltage from 2.5 to 2.6 in the BIOS to get some memory modules to work. I did this, and for the first time, I am running in Dual channel DDR mode. However, the article also mentions that "the system does not run completely stably", so I guess I'll have to wait and see if it crashes again. However, I'm far enough beyond the XP splash screen to post this message, so I guess we're getting somewhere!
-Jim Keller
http://www.centerfuse.net

Laptop fans stopped working!

I own an MSI laptop, model number M285 or FID2010. For some reason when the laptop switches on the fans start running, but as soon as the laptop begins to load windows the fans stop, causing the laptop to overheat. Can anyone please tell me why it is doing this and how to resolve it? Does the BIOS need re-flashing?
Thanks in advance for your help

I don't recall reading any posts on MSI laptops in any of our forums. I would suggest you contact MSI directly:
http://www.msi.com.tw/html/about/contact2.htm

Problem with NEO 875P FISR2 BIOS v1.8

Hello,
I own a MSI NEO 8750 FISR2 mainboard and really like it
a lot. I just recently updated the BIOS to version 1.8
(which I obtained from MSI website). The updation went
on successfully. Windows seemed to be working fine. But
all of my 3D games became very slow. I tested the
performance under 3D Mark 2001 SE and the results had
been cut down by half! Here's the configuration of my PC:
Intel Pentium 4 - 2.4 GHz
MSI Mainboard NEO 875P FISR2
512 MB DDR - 266 MHz (single dimm)
MSI Ti4800SE-VTD8X Graphics Card
Western Digital 80.0 GB UATA Hard Drive
Creative SoundBlaster Live 5.1 Sound Card
Windows XP Service Pack 1
I re-flashed the BIOS back to version 1.7 and everything
became fast again!
I don't know the reason for this but surely the update
doesn't suit me. Can you tell me what is it that I'm
doing wrong and whether I should stick to the old
version.
Regards,
Kamran

I installed the Intel INF update both from the supplied CD and from the website. It doesn't indentify the Intel SATA controller. When I install the Intel Aplication Accelerator RAID Edition, it halts at the start of the setup and exits by displaying a message. I can't recall the message exactly, but it was something like "Chipset not supported ..." I have tried to set the mode to both Legacy and Native but still no results.
Do I need to connect a hard drive to the Intel SATA controller in order to get it detected in Windows? And while I was going through the manuals, I saw a setup menu for Intel SATA controller (similar to Promise controller) before the PC boots to the OS. It doesn't appear in my PC. The Promise menu appears and I can use the Promise controller without problems. At first I thought that either the Intel or the Promise controller can work at one time. So, I disabled the Promise controller. It was no use. It just seems to appear that the Intel controller is simply absent !
Wondering if the samething has happened to anyone else?

LED won't stop flashing, even when there are no new notifications

The LED on my BlackBerry won't stop flashing, and I can't work out why. I have no new emails, messages, Facebook notifications, Twitter mentions, appointments/calendar events, and the LED didn't flash for new articles in the TIME magazine app any way. None of the other apps have anything to notify me of either.
I updated the OS some time ago, so I can't see that being the cause for the problem, which means I can not work out why the LED is still flashing, unless my BlackBerry is broken.
Has anybody else had this problem?
Running OS v4.6.1.310 (Platform 4.2.0.127)
Solved!
Go to Solution.

Hi danphynes,
Are you still experiencing this issue? If so, what color is the LED? Can you verify that the LED coverage indicator is disabled in Options -> Screen/Keyboard? Is the LED flashing red continually or does it stop for periods of time?
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

My iphone 4 was on ios 5.0.1, then a few days ago I upgraded it to ios 6.1.4, then the apple logo won't stop flashing. Can anyone help to resolve my problem? Thanks in advance

My iphone 4 was on ios 5.0.1, then a few days ago I upgraded it to ios 6.1.4, then the apple logo won't stop flashing. Can anyone help to resolve my problem? Thanks in advance

I'm trying to restore my iphone by using the recovery mode. But it always seems to run out of time, any idea why is that? Thank you again

New message symbol wont stop flashing

just had my phone back from repair ( loose screen)
Now the new message envelope symbol in the top lefy hand corner of the screen wont stop flashing
i have reloaded the latest software ( took an hour via the nokia website)
what can i do
or do i send it back again for repair

Try this..
Menu
Messaging
Options
Sim Messages
You will probably find, you have messages held there.
Delete them, and hopefully the symbol should go.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

The fan stop working

the fan stop working and the guaranty finish last week i dont now what to do

Hi
Please try these steps given below if issue is not resolved you might have to replace the Fan.
1) Clean the Vents of the Fan using a air blower.
2) Try to update Bios from HP website.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

My phone flashes each time someone calls or messages me. How do I stop flash?

My phone flashes each time someone calls or messages me. How do I stop flash?

Settings / General / Acessibility. Explore the Hearing section.

How to stop flash player showing errors?

Hi, does anyone know how to stop flash player showing runtime
errors? Is there some configuration option, or is it possible to
write a global error handler which would catch all the uncaught
exceptions so they don't get displayed to the users?
In my specific situation I've got 3rd party panorama
component in my flash site which creates some timers and listeners
but doesn't remove them when panorama is unloaded and then errors
keep showing periodically. Nothing else gets harmed and the site
keeps running normally, so it would be useful to just hide those
errors before a new version of the buggy component is released.
Thanks for any hint how to handle this !

See this cool mp3 xml player with visualization, playlist and
skins. Fully customisable. Vector.
http://flashden.net/item/mp3-xml-strongplayerstrong-with-visualization-and-skins-vectorise d/11851

Hello I have 2 seperate airport express systems on my network, each connecting to a stereo in a different room. suddenly, the one in the living room will not stop flashing amber, but the one in the bedroom works fine. I have already tried resetting it

Hello
I have 2 seperate airport express systems on my network, each connecting to a stereo in a different room. suddenly, the one in the living room will not stop flashing amber, but the one in the bedroom works fine. I have already tried resetting it with a pin, resetting it while plugging it in, and trying to find it in airport express setup (the setup assistant can't find it at all).
What am i doing wrong?

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

AE won't stop flashing "amber"

My Airport Extreme won't stop flashing amber and it is no longer broadcasting its wireless network, which is bad news for me. All of the wired Ethernet router features are still working, as the device is attached to my cable modem and all network devices (i.e. my Mac Pro, BD player, DirecTV receiver) attached to the Airport Extreme via Ethernet are seeing the internet and working, but wireless is dead. Airport Utility cannot find the device, so I can't even do a manual setup, because that option is grayed out. I've tried restarting the unit several times, but to no avail -- it just restarts and begins flashing the amber light. What should I do? Is my AE's wireless functionality dead?

No clue why its doing it, maybe some corrupt settings?
But if you want to fix it, I would recommend doing a factory reset. To do that press and hold the reset button on the back for 10-15 seconds, until the light stats flashing very fast, then let go of the reset button and let the airport reboot.
That should fix your problems, only downside is that you'll have to set it all up again since after a factory reset all your settings get wiped out.

GPU Fan stop working.

Hi Everyone,
I just bought this laptop HP Pavilion dv6-6009tx Entertainment Notebook PC a year ago, from my school's roadshow. Until recently, the fan stops working... my computer started to heat up real bad to around 70 degree celcius. I still have 2 year warranty for this laptop. Can I ask if hardware failure replacement is covered by the warranty? Cheers!
- Alan.

If the fan has stopped working HP will (should) fix it under warranty. Call them and report it.

My Neo 875P NB fan.. stops flashing :X

Similar Messages

Maybe you are looking for