My Netra T1 is still a black box

Hello again community!
I havent still been able to get a response from my Netra T1.
I have setup a connection
LOM--straight cable--converter--nullmodem--minicom
where converter is the right to left of the following:
DB9 Pin     RJ45 Pin
1 (DCD)     no connect
2 (RX)      3 (TX)
3 (TX)      6 (RX)
4 (DTR)     7 (DSR)
5 (GND)     4 and 5 (GND)
6 (DSR)     2 (DTR)
7 (RTS)     8 (CTS)
8 (CTS)     1 (RTS)
9 (RI)      no connect
I am getting no carrier on minicom.
The only thing I can tell you is that the green lights inside the netra board are on, and the error orange (user-dependent) is flashing.
Can you hint me on how to procede if I want to get any signal out of it?
I call this machine the "Stealth", but maybe this is still too stealth for me!

Hello Matteo,
thank you for allowing us to assist you in fixing another of your systems !
Why did you re-register with a new nick ?
If you forgot the password for recupero_1, use the button to let them mail you the password. In case this old account (recupero_1) doesn't work anymore, add this information to your posting. There have been other users in past that re-registered with at least 3 nicks, due to problems to re-use their old account.
Using the Feedback Form for suggestion and reporting known issues isn't worth the effort. Except for an automated e-mail that doesn't even include the text of your feedback, nothing happens.
If you ask for help, how about assigning Duke Stars and indeed rewarding them ?
I am getting no carrier on minicom.
1 (DCD) no connect DCD = Data Carrier Detect pretty obvious !
Is this a know good/working setup (hardware and software) ?
Please re-read page 6-9 (of the User's Guide) ! Your cabling is wrong (hint: replace the null-modem cable with a straight cable).
The only thing I can tell you is that the green lights inside the netra board are on, and the error orange (user-dependent) is flashing.
Can you hint me on how to procede if I want to get any signal out of it?
Have you reviewed the troubleshooting section of the "Netra� T1 AC200 and DC200 Server User�s Guide" ?
Michael

Similar Messages

  • Help! I can't get rid of this little black box!

    I ordered DSL service and tried to hook it up the other day, unsuccessfully. In the instructions it says that if you have problems to insert the disk provided. I told the lady I ordered from that I had a Mac and she said it would be no problem, but of course no where does it say that this disk is not usable on a Mac.
    You get where this is going I'm sure, I put it in and followed what it said, including restarting the iMac as instructed. After the restart it will do the "bong" sound and I get the initial white screen with the grey apple, but I never get the little grey lines in a wheel shape. After a couple of minutes I get a litte black box about 2" wide and 1/4" tall across the top of the apple with little colored lines in it, and nothing else happens or works. I can't even get the disk drive to open or close without holding the button on the back, turning it off, and then holding the open button while I turn it back on with the button.
    I have restarted using the hardware repair disk, all is fine. I restarted using Disk Warrier, all repaired, but still not working. I restarted using the 10.2 install disk and verified and repaired the disk and permissions, several were repaired, but still the black box. I tried holding the shift key at restart and still the box, and also tried holding the control and "s" key with no luck.
    Of course AT&T knows nothing about the Mac and after talking for 1.5 hours to 5 different people and having a tech guy come and not know anything to help they tell me I have to call Apple to pay for help. I am so frustrated!!! Is there anyone out there with suggestions before I call and pay?
    Many thanks,
    Cassie

    Hi Cassie:
    Welcome to Apple discussions.
    I have not used OS X 10.2.x for a long time, but I think you should consider and archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    An A&I will install a fresh OS X - hopefully eliminating whatever happened with the AT&T disk. You would, of course, have to update OS X to current levels for 10.2.
    Barry
    P.S. It also occurred to me that AT&T does not support OS X 10.2 - you might ask them that question.

  • I just upgraded to iPhoto '11.  When it was finished many pictures do not appear.  I have a black box but the information for the picture is still there.  Some are raw and some are jpeg.  Also lost all albums.  Can anyone offer assistance?

    I just upgraded to iPhoto '11.  When it was finished many pictures do not appear.  I have a black box but the information for the picture is still there.  Some are raw and some are jpeg.  Also lost all albums.  Can anyone offer assistance?  Using iOS 10.7.5

    Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • When i try to use my apple acocunt for the first time i get a prompt to put in my CC info but after i agree to the TOS the ipad only displays a black box no text, ive erased the ipad and still the same thing

    When i try to use my apple acocunt for the first time i get a prompt to put in my CC info but after i agree to the TOS the ipad only displays a black box no text, ive erased the ipad and still the same thing

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • I have these black boxes surrounding things, e.g., there is a black box around the red "close" button on the upper left corner of this page.  There is also an oblong black box

    Hi - I'm not only having trouble waking up my MBP from sleep and having to restart repeatedly which is a pain in itself, but now when it restarted, I have these black boxes surrounding things, e.g., there is a black box around the red "close" button on the upper left corner of this page.  There is also an oblong resizable black box sitting on top of anything.  The content changes depending on the actions I take.  Right now it says, "You are currently on a close button.  To click this button, which closes the current window, press Control-Option-Space."  Right now I'm open in Firefox, but it doesn't matter if only Finder is open, it's still there.  I've tried closing all my applications and restarting and I also reset the PRAM.  It won't go away.  It's probably something simple, but I don't know how to get rid of it.  Any suggestions are welcome.
    Thanks,
    Janet

    Thanks so much.  I saw this on "desktop strangeness" immediately after I posted and tried to retract my question.  It worked perfectly.  I'm not sure how VoiceOver got turned on unless something happened when I was trying to wake up the computer.  I open the lid and it flashes whatever is open and then the screen goes black and I can't wake it up.  Still looking for the resolution to this.

  • PDF docs prints black boxes instead of my pictures, Printing with Reader works

    I have one user running the most updated version of Adobe Acrobat 9 (v9.4.5 I believe it is) and when she opens a PDF document that has pictues you can see the pictures and make changes to the document as needed.  However, when you go to print, all the images in the PDF document are all Black boxes.
    Now if I open this same file in Adobe Reader (any version thus far has worked) the images are there and print preview and printing all work, the images print.  It is just in Adobe Acrobat that I have black boxes.
    I would really rather not uninstall / reinstall if it can be avoided.
    thanks,
    Willie IT

    Are you still needing help? I came across this post and wanted to make sure that everything is now working for you with  your printer and ePrint. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Can't boot - black box at apple

    Hello,
    I'm having trouble booting my ibook. I'm using 10.2.8. When I boot, I get past the gray screen, to the gray apple, and then after several seconds the gray apple gets partly covered by a black square. And it stays there.
    It gets stuck there with the black box when I try safe mode, verbose mode, single user mode. So I haven't been able to try fsck. I have run disk utility and repaired permissions and verified the disk. I have reset the PRAM/NVRAM and the PMU and have replaced the mach_kernel. It seems my next step would be to reinstall the OS and I thought I'd ask here first.
    I can boot off of an install CD and in OS 9.
    This happened yesterday after updating apple software that apple recommended to update: a QT update and two ipod updates, one of which was from 06. I also installed yahoo messenger yesterday, and have deleted it, and its preferences. Obviously something in this combination wasn't a good idea.... When I rebooted after the updates were installed, I left the computer booting, and didn't come back to it for several hours. When I came back, I had the black box covering the gray apple.
    Thank you for any help you can give me.
    Peggy
    ibook graphite G3 466   Mac OS X (10.2.x)  

    Thanks roam.
    Yes, I have run disk utility and repaired permissions and verified the disk. I've done it three times. There was never anything to repair and the permissions are now okay.
    It looks like reinstalling the system will be more complicated than I thought. I have the 10.2 upgrade CDs which, I read in Apple Support, don't do archive installs. I wanted to verify this, and went to install off the 10.2 upgrade CDs, and the install program said I couldn't install because the system on my hard drive was more recent. I guess this is the upgrade from 10.2 to 10.2.8. I have no disks for 10.2.8, and no memory of this upgrade. Might it have been one of the regular updates? And so I'd have no install disks. Why wouldn't the 10.2 disks just install 10.2 and then I could update to 10.2.8 again?
    So, I'm not sure what to do to reinstall. And am still wondering if I have other alternatives....
    Disk Warrior? Would it be worth the $100 to try? And it's website says that you can't install it onto a system with 10.2. But can I still repair 10.2 off the DiskWarrior disks? Can I make these disks from a download to a computer with OS 10.4?
    Thanks for any help you can give me.
    Peggy
    ibook graphite G3 466   Mac OS X (10.2.x)  

  • Why a black box (or fuzzy "i") when opening an image?

    In one particular folder in "Events", when I click on an image to open, it opens to a black box or at best a fuzzy "i" - were the image should be, what has happened? All other options appear as normal but if I click "edit"for example - my options become unavailable and still have the black box were the image should be. 
    All other folders in Events are fine and no such problem occurs. In checking "preferences" nothing has changed as the problem folder preferences are the same as the others - likewise not aware I've changed anything either. I've gone into 'help" but just cannot find anything there unless I'm looking into the wrong place?
    Currently I'm on OS "X" 10.6.8 using iPhoto 09  - 8.1.2 (424) which hopefully will assist too?

    In your first post:
    In one particular folder in "Events", when I click on an image to open, it opens to a black box or at best a fuzzy "i"
    In your most recent post
    Currently no ! appears now, just a black box.
    These are different issues with potentially different resolutions. Assuming that there is no exclamation mark warning, but just a black screen:
    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    but this is just one folder with 211 images - all other folders are fine and working as expected. Reading what you have written, you are referring to the whole library which seems to be extreme?
    This is not just one folder or just 211 images. What you are seeing are symptoms of an issue in the Database file. If this file is damaged then your Library is damaged and this is what needs to be fixed. That's why deleting and re-importing won't help. You'll be re-importing to a database that is known to be damaged and unstable.

  • Black box with exclamation point instead of photo

    I recently switched from a PC to Mac and used a transfer cable to move my photos into iPhoto. Small thumbnails look fine, but when I open some of them all I get is a black box with an exclamation point inside a white circle. This seems to apply only to SOME of the pics that were originally SCANNED into my PC as jpeg files. Although I suspected this was how photos imported, I did try the Rebuild feather, but that didn't work. Is still have my originals on my old PC, but I'd like to get rid of it. Is there still a way I can access what's on my Mac -- or successfully import from my PC?
    Thanks in advance for the assistance!

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • Can't get rid of black box around rendered HD footage.....

    I've read a thread about t
    he "black box" that appears in HD footage, but didn't find an answer.
    I use a PC, and edit with Adobe Premiere 3.0.
    I have a Canon camcorder that uses MiniDV HD tapes to capture the HD footage, because I wanted
    the tapes as back up, and the quality is better, in my opinion.
    I capture the footage with the HDV capture in Premiere.
    The captured file looks damn nice, full screen HD.  The book says the screen size is 1440 by 1080,
    but the actual screen size looks to be 1920 by 1080.
    When I open up the captured file in Real Player or Windows Media Player, there is no black on the sides,
    and two strips on the top and bottom that are maybe 1/4 an inch, not a problem.
    When I RENDER the editted footage, I click "export" and "movie"
    In the settings menu, under General, I choose"File Type" and "Microsoft AVI."
    In the Video section, I choose the "Cinepak Codec by Radius"
    Under Pixel Aspect Ratio, the options are:
      Square Pixels (1.0)
      D1/DV  NTSC (0.9)
      D1/DV  NTSC Widescreen 16:9 (1.2)
      Anamorphic 2:1 (2.0)
      HD Anamorphic 1080 (1.333)
      DVCPRO HD (1.5)
    There is also the Keyframe and Rendering menu on the left.
    When I try to use the top options, I get variation of the file with about a 1 1/2 to 2 inch black box on all sides, but the aspect
    is correct, or a 1 to 1 1/2 inch box at top, no box on the sides, but the frame is mushed down.
    Or the frame is square, and the vido image is pushed inward.
    An example of my initial video is below, where the aspect was correct:
    "Wildlife at Lake Fasse Point"
    http://www.youtube.com/watch?v=sisu86-HWV0
    If I play a rendered file in Windows Media Player, even if I hit "Double Size" or "Play Full Screen," the edges will STILL be bounded
    by that big black box.
    I appreciate any help.  

    What does the free http://www.headbands.com/gspot/ say about your files?
    Are you 100% sure you are using the correct project and output settings?

  • Can't get rid of black boxes when form is printed

    When I save a form to PDF there are visible black boxes around the feilds in the form. I thought these would go away once it printed but they are still there and make the form look cluttered. Any idea how to fix this?

    Hi;
    There is no option in FormsCentral to modify the fields text input box borders.  You could edit the PDF in Acrobat and remove the border.  In the screen shot below I removed the border color from the top two fields, in the bottom two fields I added a fill color so you could see the input box and it doesn't just blend in with the page:
    In this screen shot the form has been filled out, and this is how it would print:
    If you are going to edit a FormsCentral PDF in Acrobat take a look at this FAQ first:  http://forums.adobe.com/docs/DOC-3661
    Thanks,
    Josh

  • M-Audio Black Box Interface.  Acoustic guitar. No sound on monitor or on playback.  Tried every setting known to man, except the one that must work.  I appear to be recording - green lines in upper left.  Can hear it on headphones plugged into M-Audio.  ?

    M-Audio Black Box with Acoustic/electric guitar plugged in.  No sound on monitor or playback in GB.  Have tried every setting I can imagine.  Seems to recording because I have green bars in the upper left and can hear it on headphone into the M-Audio.  Record volume in GB not active - but I'm guessing the M-Audio cancels that.  Any ideas?  Help wanted.  Thanks.

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Seeing black boxes instead of hyperlinks using Adobe Reader for Android except in Reflow Mode

    I am using Adobe Reader for Android (on an Android table) to view some PDF reports that have hyperlinks in them. In Reflow Mode, I can see the hyperlinks as blue underlined text, as I would expect. In Continuous or Single Page mode, these hyperlinks are displayed as black boxes. The hyperlinks still work if you click on the black box. Can someone tell me what is causing this and how I can fix it?

    I am using Adobe Reader for Android (on an Android table) to view some PDF reports that have hyperlinks in them. In Reflow Mode, I can see the hyperlinks as blue underlined text, as I would expect. In Continuous or Single Page mode, these hyperlinks are displayed as black boxes. The hyperlinks still work if you click on the black box. Can someone tell me what is causing this and how I can fix it?

  • [solved] Solid black box instead of "hovertext / tooltip"

    This has been going on for a few weeks now and the new chromium update didn't fix it (damn).
    Anytime I scroll over a link (or the newest XKCD comic) I get a solid black box with no text.
    Here's a screenshot to show you what I mean:
    I'm running kde.  Firefox and Opera are displaying fine.
    Any ideas?
    **EDIT**
    Well, it does it when I hover over any of the tools in Gimp too, so it's not just a Chromium thing.  Weird.
    Last edited by ctarwater (2010-11-03 05:15:36)

    I thought about that.
    First I changed my chromium settings to "use classic theme", restarted it and had the same problem.  Next I changed it to use GTK+ theme, restarted it, same problem.  Last, I returned it to "hide system title bar and use compact borders" (which is my default), restarted it, same problem. 
    I've tried changing my color theme in the system settings and returned it to default too, still no luck.
    I've changed my window decorations and my desktop theme as well.  Still no luck.

  • Problem with .png images being black boxes in InDesign

    Hello,
    I'm hoping someone might be able to help me with a problem I'm having with some .png files.  When I try to place certain .png files in my InDesign document, they come in as just black boxes.  The .png files are created by a third party application, (EditLive w/MathFlow)  But if I view the .png files in Fireworks or other image viewers, they appear to be fine.  I have tried looking at the image properties inside InDesign, to see if by tweaking them it might work, but I am not a graphic designer by trade so my knowledge is rather limited.  Any help would be greatly appreciated.
    Specs:
    Windows XP
    CS4 Suite including:
         Adobe InDesign CS4
         Fireworks CS4
    Thanks,
    Josh

    That worked!  Mostly.  The little preview box on the file upload dialog still shows a black box.  But when the image is placed inside the doc it looks perfect.  Well, as perfect as the .png can look.
    Is there any way within InDesign to "ignore" the alpha channel or whatever of the graphic?  I have access to the IDML as well as the normal application interface & the SDK through the InDesign Server.  I'd prefer not to be reliant on opening the image in another tool, as we have a large number of images to process some times & it could get annoying.  If not, I can try contacting the 3rd party group that is generating the .png & see if they can better handle the alpha channel when they're creating the image maybe...
    And thanks for the quick responses!
    -Josh

Maybe you are looking for