My network problems solved
Hi!
Just wanted to share my experience.
after having LOTS of trouble connecting to the wireless router in my home with my 5 months old MBP 17 (2.4) the problem seems to be solved now. The solution came in the form of the 10.4.11 upgrade for tiger. Immediatly after I installed the upgrade and reestarted the mbp, it detected and connected to the network without any problem. Before that, my situation was weird, I could only connect in windows, using boot camp.
After that, I upgraded to Leopard. I did a clean install. I couldn't be happier! Now I think I really have the best laptop I can get. Everything works flawless!
I strongly advise you to upgrade to 10.4.11 or to leopard if possible!
I was using mac address filtering before with no wpa or wep password. After upgrading I continued with the same configurations. Then I removed the mac address filtering and implemented WPA password. In both situations now I can connect without problems.
I indeed have seen other threads about leopard. It is strange how some people seem to have problems while other not, but most strange is that it seems that there is no a unique solution.
Similar Messages
-
Here is what I have been doing:
I got my new macbook air 11" two weeks ago, and have been haven problems with wifi connection dropping, I'm using verizon fioz at home, and their router
I also have a time capsule not set up as a network just join it to my current one.
After looking online all these days, I though, maybe is the verizon device that is updated..
I then reset the time capsule, created a new network
connected my system to the time capsule network, and there it is
DONE, everything works now.
So if you are haven the same problem,, that is the fix
hope that helps.
Oh before I did these I try everything, the wifi update from apple don't work it keeps dropping it
I try everything, so don't and delete the system as some people have done, I read somewhere.
try my fix hopes that works.
Message was edited by: rawreviewerI have seen lots of issues on Yosemite with Wifi (and have been having issues myself), but yours seem different. It is a pretty new computer, have you tried taking it in under Applecare (if you live somewhere this is convenient)? Maybe you just got a defective wifi card. I won't defend Apple over this wifi mess, because it really is terrible, but your issue seems not the same as the ones I've read about while researching how to fix mine (unsucessfully....).
-
Hi there we or having a lot of network problem solving can you help us q
Am having a lot of trouble with my 4 contractso as that don't seem to be working wen I try to mack a call or text can you heplease x
Is this over your landline? This is the Home BB Forum. What exactly happens when you dial them?
-
[Solved] Network problems installing Arch
Hello everyone. I'm trying to install archlinux-2013-03-01 and I can't get to even start the installing process due to network problems.
I'm using a wired connection with DHCP but when I ping google or something it gives me the 'bad address' error (not the 'unknown host' error). I typed 'dmesg | grep r8169' (r88169 is the module for my Gigabit Ethernet driver) and the output says it's loaded, so it's not a kernel module problem.
If I type 'ip link' it says my interface is called eth0. So then I type 'ip link set eth0 up' and it says is up but again, I can't ping anything.
If I nslookup something it gives me my home address.
I even tryed to load the .iso with the option ipv6.disable=1 and still nothing.
Any help will be appreciated, thank you.
Last edited by babel (2013-04-05 14:43:42)Thank you both for your responses.
I thought this was weird too, but I can't see any interface with the new network device naming scheme. According to the wiki I must have an interface called something like epn2so but if I type 'ip link' I only see:
1: lo: <LOOPBACK> [some more info]
2: eth0: <BROADCAST, MULSTICAST, UP, LOWER_UP> [some more info]
link/ethernet [my mac address] brd ff:ff:ff:ff:ff:ff
I think eth0 is the right name because if I type 'ip link set eth0 up' it gives me no errors and I can see ...UP, LOWER_UP> when I type 'ip link'.
@WonderWoofy: I don't have any Ip address when I type 'ip addr'. I don't know what could it be. This is the first time I have issues "configuring" internet with DHCP and believe me, I've tried hundreds of different distros and configurations.
PS: I wrote [some more info] because it's kind of a pain in the ass copy exactly all the output due to I can't ctrl + c anything in the installing procees. Should I copy the output of any particular command so you guys can see it? Thank you. -
How to solve siri network problem on iphone 4s
can anyone of you know how the sovle the network problem of siri of iphone 4s ?
Please search the forums before posting. The issue of flash has been beaten into submission many time here.
-
[SOLVED]MSI P31 Neo -mobo and strange network problems
I can't get network to work properly with this MSI-mobo's integrated lan chip.
When I boot from Arch install cd r8169-module is loaded and I can get ip via dhcp. Strange thing is that I can access http but not ftp. When I change transfermode to passive from links ftp works. But during Arch install setup I can't access the repos.
When I boot to Arch after install network doesn't work at all. Only thing I get is resolv-errors when I try to use wget or pacman. R8169 module is loaded at boot and Ifconfig shows that I have ip assigned to eth0.
I also tried with 3com's 3c509 network card that I had laying around and I have exactly same network problems with it as I have with r8169.
I am really going out of my mind with this. I have a laptop with via's network chip and I've never had any network problems with it and Arch. I haven't changed anything in my routers setup and I just tried and the networking on my laptop works just fine.
I also tried Ubuntu Hardy on this desktop machine and networking works ok. Ubuntu also loads the r8169 module as Arch does.
Last edited by Aakko (2008-05-18 21:18:29)Quote from: techie5487 on 24-January-08, 07:34:41
UPDATE:
I tried booting with 2 RAM Chips and it works great! This seemed to be the problem.
The ram IS double sided which would explain it.
If you are wanting some more system specs, just ask and I will try and get the most I can.
Del UK:
If I could run 4gb it would be great but I cannot seem to find the SPD in bios. My BIOS is American Megatrends Inc. v02.61 so it would be great if you could help me with that!
If all else fails I might either just settle with 2GB or buy some new RAM chips. Can anyone please tell me some Ram chips which would be able to give this mobo 4GB?
Thanks
techie5487
Done
2 Gb in
Into bios
SPD off
Set to 5-5-5-15
Save settings
Power off
Install extra 2 x 1Gb modules into slots 2 & 4
Power system up
4Gb detected................. slow post not fast
3.25Gb checked
1 second delay
4096Mb
3.25Gb extend
768Mb in +4Gb
System sees 3.25Gb -
Network problems after update; system reinstall not fixing it.
Hello, first post here ^^
Sorry if I write with a bit of engrish. I'm very tired ^^"
My brother's laptop, a Portuguese Classmate PC (aka "Magalhães", version MG2 -- unfortunately, I can't find the corresponding international version, but have a picture) doesn't has any network at all, be it wired or wireless, with the updates of 3/August/2011 installed. I think the problem is udev.
I have no problems when using an installation media, at least for wired network.
Even after reinstalling, I still have no network.
Wired
The problem with wired, is that the eth0 interface is gone. Have tried network and NetworkManager, and it's just gone. In the output of ifconfig I only have the loopback interface (and would have wlan0, if I had the firmware for the wireless card installed).
Wired problem solved! Sorry, I actually searched the Internet for a solution and couldn't find anything useful, and only now noticed there's already a thread here about it. I should have searched this forum, instead of the Internet... sorry!
Wireless
Previously, I only had to install the rtl8192se chipset drivers from AUR.
But now, with the latest updates, the kernel [size=1](or the udev, I don't know which it is)[/size]was constantly giving me errors through tty, regarding to wifi. It could scan for networks, but not connect. I have tried with WPA and no security, result was the same.
Config files and logs
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="pt_PT.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Lisbon"
KEYMAP="pt-latin1 pt-latin9 euro"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(mii r8169 pcspkr snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="MTomas"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(syslog-ng dbus network netfs @openntpd crond cups alsa gdm)
hwdetect --show-net
NET : ppp_generic slhc rfkill
dmesg (sorry about the very long output, I don't really know whats' useful or not...)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/f2bdff34-f924-4065-ad3d-051016d84be2 rootfstype=ext4 ro add_efi_memmap
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f5c0000 (usable)
[ 0.000000] BIOS-e820: 000000003f5c0000 - 000000003f5cc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f5cc000 - 000000003f5cf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f5cf000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Intel Corporation Intel powered classmate PC/Intel powered classmate PC, BIOS BPPNV20L.90A.0008.2010.0909.1822 09/09/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3f5c0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F600000 mask 0FFE00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f7d40] f7d40
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000003f5c0000
[ 0.000000] 0000000000 - 003f400000 page 2M
[ 0.000000] 003f400000 - 003f5c0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3f5c0000 @ 3f5bd000-3f5c0000
[ 0.000000] RAMDISK: 37c12000 - 37e01000
[ 0.000000] ACPI: RSDP 00000000000f7d10 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000003f5c5013 00074 (v01 JPSCSA _JPSCSA_ 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000003f5cbc60 000F4 (v03 INTEL 06040000 PTL 00000002)
[ 0.000000] ACPI: DSDT 000000003f5c61a9 05A43 (v01 INTEL BEARG31A 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000003f5cefc0 00040
[ 0.000000] ACPI: TCPA 000000003f5cbd54 00032 (v01 Phoeni x 06040000 TL 00000000)
[ 0.000000] ACPI: MCFG 000000003f5cbd86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000003f5cbdc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 000000003f5cbdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000003f5cbe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 000000003f5cbe8a 00176 (v01 JPSCSA _JPSCSA_ 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 000000003f5c5609 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5c5563 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5c5087 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003f5c0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-000000003f5c0000
[ 0.000000] NODE_DATA [000000003f5b8000 - 000000003f5bcfff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003dc00000-ffff88003e9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0003f5c0
[ 0.000000] On node 0 totalpages: 259405
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3493 pages used for memmap
[ 0.000000] DMA32 zone: 251931 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003f200000 s83136 r8192 d23360 u1048576
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255851
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/f2bdff34-f924-4065-ad3d-051016d84be2 rootfstype=ext4 ro add_efi_memmap
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1011404k/1038080k available (4019k kernel code, 460k absent, 26216k reserved, 3335k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.531 MHz processor.
[ 0.003340] Calibrating delay loop (skipped), value calculated using timer frequency.. 3326.60 BogoMIPS (lpj=5541770)
[ 0.003531] pid_max: default: 32768 minimum: 301
[ 0.003952] Security Framework initialized
[ 0.004047] AppArmor: AppArmor disabled by boot time parameter
[ 0.004419] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.007667] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.008243] Mount-cache hash table entries: 256
[ 0.009502] Initializing cgroup subsys ns
[ 0.009600] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.009736] Initializing cgroup subsys cpuacct
[ 0.009925] Initializing cgroup subsys memory
[ 0.010064] Initializing cgroup subsys devices
[ 0.010158] Initializing cgroup subsys freezer
[ 0.010249] Initializing cgroup subsys net_cls
[ 0.010340] Initializing cgroup subsys blkio
[ 0.010565] CPU: Physical Processor ID: 0
[ 0.010656] CPU: Processor Core ID: 0
[ 0.010743] mce: CPU supports 5 MCE banks
[ 0.010839] CPU0: Thermal monitoring handled by SMI
[ 0.010849] using mwait in idle threads.
[ 0.012451] ACPI: Core revision 20110316
[ 0.023363] ftrace: allocating 15966 entries in 63 pages
[ 0.026783] Setting APIC routing to flat
[ 0.027287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061420] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
[ 0.063329] APIC calibration not consistent with PM-Timer: 359ms instead of 100ms
[ 0.063329] APIC delta adjusted to PM-Timer: 1039059 (3740601)
[ 0.063329] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.063329] ... version: 3
[ 0.063329] ... bit width: 40
[ 0.063329] ... generic registers: 2
[ 0.063329] ... value mask: 000000ffffffffff
[ 0.063329] ... max period: 000000007fffffff
[ 0.063329] ... fixed-purpose events: 3
[ 0.063329] ... event mask: 0000000700000003
[ 0.080180] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.106732] Booting Node 0, Processors #1 Ok.
[ 0.106880] smpboot cpu 1: start_ip = 98000
[ 0.006666] CPU0: Thermal monitoring enabled (TM1)
[ 0.203381] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.210009] Brought up 2 CPUs
[ 0.210112] Total of 2 processors activated (6652.11 BogoMIPS).
[ 0.210657] devtmpfs: initialized
[ 0.217499] PM: Registering ACPI NVS region at 3f5cc000 (12288 bytes)
[ 0.221762] print_constraints: dummy:
[ 0.222075] NET: Registered protocol family 16
[ 0.222464] ACPI: bus type pci registered
[ 0.222965] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
[ 0.223102] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
[ 0.225887] PCI: Using configuration type 1 for base access
[ 0.226974] bio: create slab <bio-0> at 0
[ 0.229126] ACPI: EC: Look up EC in DSDT
[ 0.237091] ACPI: SSDT 000000003f5c5ed2 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.237853] ACPI: Dynamic OEM Table Load:
[ 0.238022] ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.238519] ACPI: SSDT 000000003f5c5868 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.239233] ACPI: Dynamic OEM Table Load:
[ 0.239401] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.240151] ACPI: SSDT 000000003f5c60d5 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.240891] ACPI: Dynamic OEM Table Load:
[ 0.241061] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.241466] ACPI: SSDT 000000003f5c5e4d 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.242187] ACPI: Dynamic OEM Table Load:
[ 0.242357] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.243484] ACPI: Interpreter enabled
[ 0.243588] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.243922] ACPI: Using IOAPIC for interrupt routing
[ 0.255265] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.263625] ACPI: No dock devices found.
[ 0.263714] HEST: Table not found.
[ 0.263800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.265505] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.265765] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.266086] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.266668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.270174] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.270276] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.270400] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.270524] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.270647] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.270772] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.270898] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xf7ffffff]
[ 0.271021] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
[ 0.271118] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.271263] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[ 0.271320] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[ 0.271335] pci 0000:00:02.0: reg 10: [mem 0xf0200000-0xf027ffff]
[ 0.271346] pci 0000:00:02.0: reg 14: [io 0x18d0-0x18d7]
[ 0.271356] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.271366] pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
[ 0.271410] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[ 0.271424] pci 0000:00:02.1: reg 10: [mem 0xf0280000-0xf02fffff]
[ 0.271531] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.271559] pci 0000:00:1b.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.271649] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271659] pci 0000:00:1b.0: PME# disabled
[ 0.271694] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.271793] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.271802] pci 0000:00:1c.0: PME# disabled
[ 0.271842] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.271935] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.271944] pci 0000:00:1c.1: PME# disabled
[ 0.271983] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.272082] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.272091] pci 0000:00:1c.2: PME# disabled
[ 0.272136] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.272197] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.272257] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.272338] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.272398] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.272459] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.272511] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.272596] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.272670] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.272701] pci 0000:00:1d.7: reg 10: [mem 0xf0504000-0xf05043ff]
[ 0.272808] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.272817] pci 0000:00:1d.7: PME# disabled
[ 0.272848] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.272944] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.273056] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.273215] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[ 0.273244] pci 0000:00:1f.2: reg 10: [io 0x18e8-0x18ef]
[ 0.273259] pci 0000:00:1f.2: reg 14: [io 0x18dc-0x18df]
[ 0.273274] pci 0000:00:1f.2: reg 18: [io 0x18e0-0x18e7]
[ 0.273289] pci 0000:00:1f.2: reg 1c: [io 0x18d8-0x18db]
[ 0.273304] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
[ 0.273334] pci 0000:00:1f.2: reg 24: [mem 0xf0504400-0xf05047ff]
[ 0.273383] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.273391] pci 0000:00:1f.2: PME# disabled
[ 0.273418] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.273494] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
[ 0.273613] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.273709] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled)
[ 0.273718] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.273730] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.273884] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[ 0.273955] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.274076] pci 0000:03:00.0: reg 18: [mem 0xf0520000-0xf0520fff 64bit pref]
[ 0.274148] pci 0000:03:00.0: reg 20: [mem 0xf0510000-0xf051ffff 64bit pref]
[ 0.274199] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.274363] pci 0000:03:00.0: supports D1 D2
[ 0.274368] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274387] pci 0000:03:00.0: PME# disabled
[ 0.274568] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.274663] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.274672] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.274685] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.274782] pci 0000:04:00.0: [10ec:8172] type 0 class 0x000280
[ 0.274812] pci 0000:04:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.274832] pci 0000:04:00.0: reg 14: [mem 0xf0100000-0xf0103fff]
[ 0.274954] pci 0000:04:00.0: supports D1 D2
[ 0.274960] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274970] pci 0000:04:00.0: PME# disabled
[ 0.280025] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.280144] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.280152] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.280164] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.280266] pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
[ 0.280369] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.280378] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.280390] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.280397] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.280404] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.280411] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.280417] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.280424] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.280431] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.280438] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
[ 0.280445] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
[ 0.280451] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.280490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.280660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.280757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.280849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.280941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.281235] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.281497] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.281828] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.282049] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.282310] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.282632] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.297275] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.297984] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.298679] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.299375] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.300108] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.300923] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.301740] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.302444] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.303298] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.303339] vgaarb: loaded
[ 0.303656] PCI: Using ACPI for IRQ routing
[ 0.303746] PCI: pci_cache_line_size set to 64 bytes
[ 0.303778] pci 0000:00:1b.0: address space collision: [mem 0xf0500000-0xf0503fff 64bit] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.303990] pci 0000:00:1d.7: address space collision: [mem 0xf0504000-0xf05043ff] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.304159] pci 0000:00:1f.2: address space collision: [mem 0xf0504400-0xf05047ff] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.304389] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.304395] reserve RAM buffer: 000000003f5c0000 - 000000003fffffff
[ 0.304709] NetLabel: Initializing
[ 0.304793] NetLabel: domain hash size = 128
[ 0.304878] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.304991] NetLabel: unlabeled traffic allowed by default
[ 0.305112] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.305216] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.305468] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.316700] Switching to clocksource hpet
[ 0.319651] Switched to NOHz mode on CPU #0
[ 0.319806] Switched to NOHz mode on CPU #1
[ 0.333572] pnp: PnP ACPI init
[ 0.333697] ACPI: bus type pnp registered
[ 0.335270] pnp 00:00: [bus 00-3f]
[ 0.335277] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.335283] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.335289] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.335295] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.335301] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.335307] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.335312] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.335318] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.335324] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.335329] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.335335] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.335341] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.335346] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.335352] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.335358] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.335363] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.335369] pnp 00:00: [mem 0x40000000-0xf7ffffff window]
[ 0.335375] pnp 00:00: [io 0x0d00-0xfdff window]
[ 0.335381] pnp 00:00: [mem 0x00000000 window]
[ 0.335386] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.335514] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.335756] pnp 00:01: [io 0x0010-0x001f]
[ 0.335763] pnp 00:01: [io 0x0024-0x0025]
[ 0.335768] pnp 00:01: [io 0x0028-0x0029]
[ 0.335773] pnp 00:01: [io 0x002c-0x002d]
[ 0.335778] pnp 00:01: [io 0x0030-0x0031]
[ 0.335783] pnp 00:01: [io 0x0034-0x0035]
[ 0.335788] pnp 00:01: [io 0x0038-0x0039]
[ 0.335793] pnp 00:01: [io 0x003c-0x003d]
[ 0.335798] pnp 00:01: [io 0x0072-0x0077]
[ 0.335803] pnp 00:01: [io 0x0080]
[ 0.335808] pnp 00:01: [io 0x0090-0x009f]
[ 0.335813] pnp 00:01: [io 0x00a4-0x00a5]
[ 0.335818] pnp 00:01: [io 0x00a8-0x00a9]
[ 0.335823] pnp 00:01: [io 0x00ac-0x00ad]
[ 0.335827] pnp 00:01: [io 0x00b0-0x00b5]
[ 0.335832] pnp 00:01: [io 0x00b8-0x00b9]
[ 0.335837] pnp 00:01: [io 0x00bc-0x00bd]
[ 0.335842] pnp 00:01: [io 0x0800-0x080f]
[ 0.335848] pnp 00:01: [io 0x1000-0x107f]
[ 0.335853] pnp 00:01: [io 0x1180-0x11bf]
[ 0.335858] pnp 00:01: [io 0x002e-0x002f]
[ 0.335869] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.335874] pnp 00:01: [io 0xfe00]
[ 0.335879] pnp 00:01: [io 0x0068-0x0077]
[ 0.335884] pnp 00:01: [io 0x0200-0x020f]
[ 0.335889] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.335895] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.335900] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.335906] pnp 00:01: [mem 0xfef00000-0xfeffffff]
[ 0.336082] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.336183] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.336278] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.336373] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.336468] system 00:01: [io 0xfe00] has been reserved
[ 0.336560] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.336656] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.336798] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.336897] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.336996] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.337098] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.337130] pnp 00:02: [io 0x0000-0x000f]
[ 0.337136] pnp 00:02: [io 0x0081-0x008f]
[ 0.337141] pnp 00:02: [io 0x00c0-0x00df]
[ 0.337147] pnp 00:02: [dma 4]
[ 0.337215] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.337242] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.337263] pnp 00:03: [irq 13]
[ 0.337336] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.337431] pnp 00:04: [io 0x0070-0x0071]
[ 0.337445] pnp 00:04: [irq 8]
[ 0.337513] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.338017] pnp 00:05: [io 0x03f8-0x03ff]
[ 0.338032] pnp 00:05: [irq 4]
[ 0.338239] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.338320] pnp 00:06: [io 0x0061]
[ 0.338392] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.338454] pnp 00:07: [mem 0xfed40000-0xfed44fff]
[ 0.338534] pnp 00:07: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active)
[ 0.338562] pnp 00:08: [io 0x0060]
[ 0.338567] pnp 00:08: [io 0x0064]
[ 0.338581] pnp 00:08: [irq 1]
[ 0.338653] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.338686] pnp 00:09: [irq 12]
[ 0.338759] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.339063] pnp 00:0a: [mem 0xff800000-0xffffffff]
[ 0.339151] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.339574] pnp: PnP ACPI: found 11 devices
[ 0.339666] ACPI: ACPI bus type pnp unregistered
[ 0.349216] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40000000-0x400fffff]
[ 0.349328] pci 0000:00:1b.0: BAR 0: assigned [mem 0x40100000-0x40103fff 64bit]
[ 0.349464] pci 0000:00:1b.0: BAR 0: set to [mem 0x40100000-0x40103fff 64bit] (PCI address [0x40100000-0x40103fff])
[ 0.349606] pci 0000:00:1d.7: BAR 0: assigned [mem 0x40104000-0x401043ff]
[ 0.349710] pci 0000:00:1d.7: BAR 0: set to [mem 0x40104000-0x401043ff] (PCI address [0x40104000-0x401043ff])
[ 0.349849] pci 0000:00:1f.2: BAR 5: assigned [mem 0x40104400-0x401047ff]
[ 0.349950] pci 0000:00:1f.2: BAR 5: set to [mem 0x40104400-0x401047ff] (PCI address [0x40104400-0x401047ff])
[ 0.350115] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.350248] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40400000-0x405fffff]
[ 0.350352] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
[ 0.350483] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.350580] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.350673] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.350773] pci 0000:00:1c.0: bridge window [mem 0x40400000-0x405fffff]
[ 0.350874] pci 0000:00:1c.0: bridge window [mem 0x40600000-0x407fffff 64bit pref]
[ 0.351009] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0540000-0xf055ffff pref]
[ 0.351133] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.351225] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.351324] pci 0000:00:1c.1: bridge window [mem 0x40000000-0x400fffff]
[ 0.351425] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.351558] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.351649] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.351749] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.351850] pci 0000:00:1c.2: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.351981] pci 0000:00:1e.0: PCI bridge to [bus 11-11]
[ 0.352070] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.352164] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.352258] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.352370] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.352482] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.352586] pci 0000:00:1c.0: setting latency timer to 64
[ 0.352607] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.352709] pci 0000:00:1c.1: setting latency timer to 64
[ 0.352728] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.352830] pci 0000:00:1c.2: setting latency timer to 64
[ 0.352844] pci 0000:00:1e.0: setting latency timer to 64
[ 0.352853] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.352859] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.352865] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.352871] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.352877] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.352883] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.352890] pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.352896] pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
[ 0.352902] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.352908] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.352914] pci_bus 0000:02: resource 1 [mem 0x40400000-0x405fffff]
[ 0.352921] pci_bus 0000:02: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
[ 0.352927] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.352933] pci_bus 0000:03: resource 1 [mem 0x40000000-0x400fffff]
[ 0.352940] pci_bus 0000:03: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.352946] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.352952] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.352959] pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.352966] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
[ 0.352972] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.352978] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.352984] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.352990] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.352996] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.353002] pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.353009] pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
[ 0.353015] pci_bus 0000:11: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.353230] NET: Registered protocol family 2
[ 0.353666] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.354759] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.356562] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.357461] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.357565] TCP reno registered
[ 0.357677] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.357790] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.358526] NET: Registered protocol family 1
[ 0.358655] pci 0000:00:02.0: Boot video device
[ 0.358843] PCI: CLS 32 bytes, default 64
[ 0.358970] Unpacking initramfs...
[ 0.422600] Freeing initrd memory: 1980k freed
[ 0.424221] Simple Boot Flag at 0x36 set to 0x1
[ 0.425202] audit: initializing netlink socket (disabled)
[ 0.425328] type=2000 audit(1312465475.423:1): initialized
[ 0.426137] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.431274] VFS: Disk quotas dquot_6.5.2
[ 0.431768] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.432308] msgmni has been set to 1979
[ 0.433016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.433243] io scheduler noop registered
[ 0.433398] io scheduler deadline registered
[ 0.433626] io scheduler cfq registered (default)
[ 0.433955] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.434029] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.434158] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.434222] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.434347] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.434410] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.434777] intel_idle: MWAIT substates: 0x20220
[ 0.434799] intel_idle: v0.4 model 0x1C
[ 0.434803] intel_idle: lapic_timer_reliable_states 0x2
[ 0.434847] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.435010] ERST: Table is not found!
[ 0.435250] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.456560] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.674724] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.727052] Linux agpgart interface v0.103
[ 0.727338] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.731303] i8042: Detected active multiplexing controller, rev 1.1
[ 0.734370] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.734541] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.734705] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.734863] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.735024] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.735354] mousedev: PS/2 mouse device common for all mice
[ 0.753576] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.753717] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.753983] cpuidle: using governor ladder
[ 0.754335] cpuidle: using governor menu
[ 0.754959] TCP cubic registered
[ 0.755047] NET: Registered protocol family 17
[ 0.755152] Registering the dns_resolver key type
[ 0.755524] PM: Hibernation image not present or could not be loaded.
[ 0.755541] registered taskstats version 1
[ 0.756395] rtc_cmos 00:04: setting system clock to 2011-08-04 13:44:36 UTC (1312465476)
[ 0.756612] Initializing network drop monitor service
[ 0.760092] Freeing unused kernel memory: 712k freed
[ 0.760552] Write protecting the kernel read-only data: 6144k
[ 0.761521] Freeing unused kernel memory: 60k freed
[ 0.768916] Freeing unused kernel memory: 784k freed
[ 0.773948] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.824947] udevd[74]: starting version 173
[ 0.877923] SCSI subsystem initialized
[ 0.935196] libata version 3.00 loaded.
[ 0.956774] ahci 0000:00:1f.2: version 3.0
[ 0.956824] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.957043] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.957186] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.957352] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 0.957485] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.964648] scsi0 : ahci
[ 0.965831] scsi1 : ahci
[ 0.966239] scsi2 : ahci
[ 0.966607] scsi3 : ahci
[ 0.967366] ata1: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104500 irq 43
[ 0.967524] ata2: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104580 irq 43
[ 0.967680] ata3: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104600 irq 43
[ 0.967831] ata4: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104680 irq 43
[ 1.286817] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.286986] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.287140] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.287285] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.296743] ata1.00: ATA-8: SAMSUNG HM250HI, 2AC101C4, max UDMA/133
[ 1.296845] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.306650] ata1.00: configured for UDMA/133
[ 1.307168] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM250HI 2AC1 PQ: 0 ANSI: 5
[ 1.361599] usbcore: registered new interface driver usbfs
[ 1.361788] usbcore: registered new interface driver hub
[ 1.362029] usbcore: registered new device driver usb
[ 1.362890] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.363254] sd 0:0:0:0: [sda] Write Protect is off
[ 1.363390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.363491] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.371359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.371567] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.371722] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.371734] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.371971] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.393443] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.393567] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.397557] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.397596] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x40104000
[ 1.410069] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.410565] hub 1-0:1.0: USB hub found
[ 1.410687] hub 1-0:1.0: 8 ports detected
[ 1.418573] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 1.420139] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.436350] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.436604] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.436912] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.436925] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.437083] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.450137] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.450657] hub 2-0:1.0: USB hub found
[ 1.450776] hub 2-0:1.0: 2 ports detected
[ 1.451206] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.451346] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.451358] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.451506] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.466851] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.467375] hub 3-0:1.0: USB hub found
[ 1.467491] hub 3-0:1.0: 2 ports detected
[ 1.467949] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.468100] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.468111] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.468263] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.476847] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.477389] hub 4-0:1.0: USB hub found
[ 1.477506] hub 4-0:1.0: 2 ports detected
[ 1.477926] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.478068] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.478080] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.478233] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.486815] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.487337] hub 5-0:1.0: USB hub found
[ 1.487454] hub 5-0:1.0: 2 ports detected
[ 1.720183] usb 1-4: new high speed USB device number 2 using ehci_hcd
[ 2.310090] usb 1-7: new high speed USB device number 3 using ehci_hcd
[ 3.346515] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 3.346624] EXT4-fs (sda2): write access will be enabled during recovery
[ 3.481722] EXT4-fs (sda2): orphan cleanup on readonly fs
[ 3.481844] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572970
[ 3.481970] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572968
[ 3.482041] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 923116
[ 3.482090] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572948
[ 3.482130] EXT4-fs (sda2): 4 orphan inodes deleted
[ 3.482225] EXT4-fs (sda2): recovery complete
[ 4.287281] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.547177] udevd[278]: starting version 173
[ 5.875278] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.875984] ACPI: AC Adapter [AC0] (off-line)
[ 5.881017] ACPI: acpi_idle yielding to intel_idle
[ 5.888339] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input1
[ 5.939985] ACPI: Lid Switch [LID]
[ 5.940983] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input2
[ 5.941147] ACPI: Power Button [PWRB]
[ 5.941583] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 5.941763] ACPI: Sleep Button [SLPB]
[ 5.942546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.942697] ACPI: Power Button [PWRF]
[ 5.943413] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.943529] ACPI: Thermal Zone [TZ01] (24 C)
[ 5.972400] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.972588] ACPI: Battery Slot [BAT1] (battery present)
[ 5.995124] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 5.995453] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 5.995846] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 5.999895] iTCO_vendor_support: vendor-support=0
[ 6.012373] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 6.124751] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.125083] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x1060)
[ 6.125348] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.190412] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.194157] tpm_tis 00:07: 1.2 TPM (device-id 0xFE, rev-id 70)
[ 6.215082] Initializing USB Mass Storage driver...
[ 6.215469] usbcore: registered new interface driver usb-storage
[ 6.215586] USB Mass Storage support registered.
[ 6.267697] usb 1-7: USB disconnect, device number 3
[ 6.269402] Linux media interface: v0.10
[ 6.271745] scsi4 : usb-storage 1-7:1.0
[ 6.278594] usbcore: registered new interface driver ums-realtek
[ 6.324583] usbcore: registered new interface driver uas
[ 6.361274] Linux video capture interface: v2.00
[ 6.416800] uvcvideo: Found UVC 1.00 device USB Camera (5986:02a8)
[ 6.435626] input: USB Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input5
[ 6.435979] usbcore: registered new interface driver uvcvideo
[ 6.436094] USB Video Class driver (v1.0.0)
[ 6.516768] [drm] Initialized drm 1.1.0 20060810
[ 6.632026] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.657529] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.657663] i915 0000:00:02.0: setting latency timer to 64
[ 6.729787] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 6.729799] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.729904] [drm] Driver supports precise vblank timestamp query.
[ 6.805456] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.805960] [drm] initialized overlay support
[ 6.965295] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 7.013599] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 7.142190] fbcon: inteldrmfb (fb0) is primary device
[ 7.190534] Console: switching to colour frame buffer device 128x37
[ 7.197352] fb0: inteldrmfb frame buffer device
[ 7.197461] drm: registered panic notifier
[ 7.197660] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110316/video-1148)
[ 7.198144] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 7.198602] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 7.199927] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.736636] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.833668] EXT3-fs: barriers not enabled
[ 8.856596] kjournald starting. Commit interval 5 seconds
[ 8.859646] EXT3-fs (sda4): using internal journal
[ 8.862624] EXT3-fs (sda4): mounted filesystem with ordered data mode
[ 9.026943] Adding 2096444k swap on /dev/sda6. Priority:-1 extents:1 across:2096444k
[ 18.281512] NET: Registered protocol family 10
[ 21.591928] EXT4-fs (sda2): re-mounted. Opts: commit=600
[ 35.750474] fuse init (API version 7.16)
[ 201.029607] PPP generic driver version 2.4.2
[ 3255.955029] EXT4-fs (sda2): re-mounted. Opts: commit=0
[10041.892469] usb 1-1: new high speed USB device number 4 using ehci_hcd
[10042.021338] scsi5 : usb-storage 1-1:1.0
[10043.026686] scsi 5:0:0:0: Direct-Access TOSHIBA MK1234GSX PQ: 0 ANSI: 2
[10043.031863] sd 5:0:0:0: Attached scsi generic sg1 type 0
[10043.036190] sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[10043.041825] sd 5:0:0:0: [sdb] Write Protect is off
[10043.045147] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00
[10043.045157] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.052676] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.064806] sdb: sdb1
[10043.071939] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.075091] sd 5:0:0:0: [sdb] Attached SCSI disk
[10089.898154] EXT3-fs (sdb): error: can't find ext3 filesystem on dev sdb.
[10089.913066] EXT4-fs (sdb): VFS: Can't find ext4 filesystem
[10089.936439] FAT: invalid media value (0xb9)
[10089.939320] VFS: Can't find a valid FAT filesystem on dev sdb.
EDIT: ls -l /etc/modprobe.d
total 16
-rw-r--r-- 1 root root 30 Ago 4 04:57 blacklist_net.conf
-rw-r--r-- 1 root root 182 Ago 4 04:57 blacklist_sound.conf
-rw-r--r-- 1 root root 55 Jun 25 15:30 modprobe.conf
-rw-r--r-- 1 root root 196 Abr 8 11:08 usb-load-ehci-first.conf
Thanks in advance for any help.
Last edited by JohnTH (2011-08-04 16:31:18)The kernel outputs many error messages when I start NetwrokManager, and persists even when I stop it
Here is part of a dmesg:
[ 587.134444] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 587.135365] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 587.136337] HW_VAR_MRC: Turn on 1T1R MRC!
[ 587.553458] pwrdown, 0x6(BIT6)=f1
[ 589.566485] pwrdown, 0x6(BIT6)=f1
[ 591.573163] pwrdown, 0x6(BIT6)=f1
[ 593.579828] pwrdown, 0x6(BIT6)=f1
[ 595.586517] pwrdown, 0x6(BIT6)=f1
[ 597.593183] pwrdown, 0x6(BIT6)=f1
[ 599.599777] pwrdown, 0x6(BIT6)=f1
[ 601.606490] pwrdown, 0x6(BIT6)=f1
[ 603.613185] pwrdown, 0x6(BIT6)=f1
[ 605.619843] pwrdown, 0x6(BIT6)=f1
[ 607.626506] pwrdown, 0x6(BIT6)=f1
[ 609.633150] pwrdown, 0x6(BIT6)=f1
[ 611.639785] pwrdown, 0x6(BIT6)=f1
[ 613.646491] pwrdown, 0x6(BIT6)=f1
[ 615.653171] pwrdown, 0x6(BIT6)=f1
[ 617.659839] pwrdown, 0x6(BIT6)=f1
[ 619.666513] pwrdown, 0x6(BIT6)=f1
[ 621.673175] pwrdown, 0x6(BIT6)=f1
[ 623.679774] pwrdown, 0x6(BIT6)=f1
[ 625.686507] pwrdown, 0x6(BIT6)=f1
[ 627.693176] pwrdown, 0x6(BIT6)=f1
[ 629.699826] pwrdown, 0x6(BIT6)=f1
[ 631.706480] pwrdown, 0x6(BIT6)=f1
[ 633.713169] pwrdown, 0x6(BIT6)=f1
[ 635.719785] pwrdown, 0x6(BIT6)=f1
[ 637.726499] pwrdown, 0x6(BIT6)=f1
[ 639.733146] pwrdown, 0x6(BIT6)=f1
[ 641.739824] pwrdown, 0x6(BIT6)=f1
[ 643.746489] pwrdown, 0x6(BIT6)=f1
[ 645.753149] pwrdown, 0x6(BIT6)=f1
[ 647.010241] pwrdown, 0x6(BIT6)=f1
[ 647.135295] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 647.136216] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 647.137240] HW_VAR_MRC: Turn on 1T1R MRC!
[ 647.753447] pwrdown, 0x6(BIT6)=f1
[ 649.766491] pwrdown, 0x6(BIT6)=f1
[ 651.773160] pwrdown, 0x6(BIT6)=f1
[ 653.779830] pwrdown, 0x6(BIT6)=f1
Can somebody help me? -
Time Machine couldn't complete the backup due to a network problem
Firstly apologies for the long post, I've been bottling these problems up and could now use some expert advice.
I have a MacPro (10.6.3) with four internal drives (320GB system/apps. + 3x 750GB data, images etc) and a MacBook Pro (10.6.6) with a 320GB internal. With so much accumulated data (Mac user since SE FDHD) I wanted a reliable means to backup all my projects, books, papers, research, images etc. I had several bad experiences using Iomega drives (Ultramax and Storcentre) which were not very Mac compatible and shifted over to a 10TB LaCie 5Big Network 2 which is promoted as Time Machine compatible. Set up Time Machine (with a few hiccups) in Sept 2010 and it ran perfectly, backing up both main computers until March 2011. I have now experienced a string of problems backing up the MacPro, some of which have been resolved speaking to people, some by checking forums and some by using my own noddle to figure it out. The latest error message I am getting is "Time Machine couldn't complete the backup due to a network problem. Make sure your computer and the backup disc are on the same network, and that the backup disc is turned on. Then try again to back up."
The circumstances of this are as follows: TM seems to be trying to completely back up everything already backed up from previous months so I am using the "exclude" option to do this in manageable chunks (5.54TB of 7.99TB is available so there is a lot of stuff on there, hence my reticence to erase and start again). I started a backup last night which said it was 242GB and when I came back hours later (I estimate 30GB and hour or 500MB a minute) it has failed with the error message above. I asked it to back up again and it said it now had 191GB to backup, at the next failure it was 142GB, dropping by approx 50GB a time (if there a maximum it can manage in one go?), the next time it was starting again with 242GB.
I checked the disc it was backing up to, discovered it was now selecting Public-1, re-selected Public which houses the macpro.sparsebundle, dropped the backup size (Options) to 73GB and set it off again and it is backing up as I write. I am hoping it will complete and permit another chunk to be backup but the fact it looses network connection (seemingly) or has a maximum backup in one go, is annoying because it means you cannot leave it overnight and trust it to do the backups.
The other problem seems to be a shut down by LaCie 5Big because several times (and once this morning) I have had this message "The file server "LaCie 5Big" has closed down, followed by a complete Lacie shut down and auto-reboot with all lights and whistles. Lacie think this could be a power supply problem and say they are sending me another power brick. They also say they do not support Time Machine (they should check their own literature) and suggest I use LaCie 5Big for 'drag and drop' backup. If I wanted to do that I could pick up a cheap and nasty HD from PCWorld, not this high end 10TB drive which cost over £1,000 !
For a while y'day I could not even find the Lacie on the network but after changing the ethernet cable from Lacie to router (Linksys) it miraculously re-appeared so that problem may have been the original Lacie blue ethernet cable had developed a fault. Checking cables is an oft-overlooked option.
A catalogue of errors, some solved, others still all pervading, so any words from the wise would be gratefully accepted.I verified the macpro.sparsebundle and Time Machine backups in Disk Utility and it said both appeared to be Okay in green type. So that did not solve the issue. I did a Disk Utility repair a day or so again (despite Verify saying everything was fine) and said there was nothing to repair. I suspect two problems, the power brick may be faulty producing intermittent power and maybe causing the drive to close down (hopefully Lacie will send me a replacement to try) and second, I am thinking the network connection is getting dropped causing crashed backups without the Lacie shutdown/reboot sequence. The 73GB back up failed, I started it again at 54GB and it failed again, just started it again at 45GB - this is no way to progress!
Perhaps the relatively new (last year) Linksys router is the problem, I find my MBP says AirPort is active but it fails to appear in Go>Server unless I switch it off and on again and perhaps a similar problem drops the connnection to the Lacie. -
Help with Boot Camp Assistant network problem while downloading windows support system!
I need to download Windows support software, but just keep encountering a problem which says "Can't download Windows Support Software because of a network problem." What should I do? I'm currently using Boot Camp Assistant v5.0.0, and OS X 10.8.2. Help! What can I do to solve this network problem? Please and thank you (:
I have the same problem. Anyone out there? Hello?
-
WiFi connection problem solved
My intel iMac and MBA had no problem but iPods 3g and 5g did. I had an old Netgear router connected and sitting next to my Airport Express. On a hunch I diconnected the Netgear and created a guest network to replace the one on the Netgear. PROBLEM SOLVED!
Evidently our iPods and boarder's iPhone had problems sorting out the signals and finding the right addresses. Moving the AE to a higher and slightly more central position also helped.
JimSame here on a Vodafone PocketWiFi 2.
Tried NetworkManager, wicd, wifi-menu but all have the same issue.
I recently installed Aptosid on another machine and it has the same problem... It also has kernel version 3.9.
All the live CDs I've tried work, even an Arch CD from May works, though a current install does not.
I have no problems connecting to another (wpa2 enterprise) network yet can't on this 3G modem.
I'm hoping this isn't a permanent issue and perhaps an update very soon will fix this.
It seems the only way to fix this for now is to use an old version of Linux. I'm currently running a virtual machine only for the purpose of Internet sharing, very annoying. -
Help troubleshooting networking problem...
I apologize for calling this a "networking problem," I just don't know how to title it...
Basically, I'm looking for help tracking down an odd problem on my MacBook. It mostly manifests as incomplete web requests.
I'll try to explain.
I'll go to a website, which starts a browser downloading images and what not. Most times, I never get the entire web page. For instance, on this very page, the bottom of the browser (Firefox) says, "Waiting for images.apple.com" and the circle is spinning at the top. This unresolved request, whatever it is, is unlikely to complete.
Here's what I've tried:
1. Updating my wireless router. (Netgear G. I honestly don't notice this problem on other systems in my office, though.)
2. Changing web browsers. (It affects others, too.)
3. Creating Mozilla profiles.
4. Surfing in different Mac accounts.
5. Clearning browser caches/cookies/etc.
6. Turned on/off interference robustness on the AE.
I'm not looking for a solution (unless you have one). I am looking for some new ideas on troubleshooting the problem.
What's most annoying is that the problem is GASP intermittent. I may do one of the above things, for instance, and it seems like the problem goes away, but it comes back eventually. And it also eventually leaves for a period of time if I do nothing.
It feels like a networking issue, something outside the Mac -- wireless interference or something, but ... I just don't know.
Thanks.I should have mentioned that I tried that.
There are a couple of APs in the neighborhood, one is a Belkin Pre-N with Airgo's chipset. The only reason I mention the Belkin is that there have been some news reports that suggest Airgo's wireless management degrades regular B/G wireless devices in the area. I don't know how true that is.
Anyway, it seems like I've solved it.
I surfed wired for about two days and was able to determine that the problem was related to wireless communication. Now, whether it was my Airport Extreme or my Access Point...
My Access Point was one that was given to me by a customer. She didn't need it any longer. It was used and I didn't really know how it performed. I can say that one of the things I did before all these problems started to take place was install that AP.
I replaced the AP this weekend. I decided I would just try a new one.
That seems to have fixed it. I do get the occasional hangup. (I do an awful lot of surfing.) Mostly I see the hangups now on pages that have an abnormally high amount of connections to external sources. An example of this is the dynamically generated Newsgator RSS feed page. This page goes out to all manner of websites to grab images and what not and I sometimes see hangups there, but that's about it.
This is good news. I was worried my Airport Extreme was to blame. But, you know, even my wife's laptop (PC) is performing better wirelessly. There was a problem in that Access Point. I had updated the firmware just the week previous to see if that would fix the problems I experienced, but no...
Anyway, I kind of needed to talk this out. I appreciate your help! -
Basis System: 2 possible network problems detected - check tracefile
Hi Experts,
I have installed a a Netweaver 7.01 when i start the server throught MMC
first the dispatcher show the message as unable to reach teh message server
but where as message server is running successfully.
after few seconds it shows the status Stopped
Below is my trace please help me to solve this issue.
Thanks,
Veeru.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 3892
Wed Jan 14 05:46:37 2009
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3892) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Jan 14 05:46:39 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0121.qqq.nxst) took 2 seconds
Wed Jan 14 05:46:44 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >Veeru_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04ED0040, size: 4205552)
DpShMCreate: allocated sys_adm at 04ED0040
DpShMCreate: allocated wp_adm at 04ED1A28
DpShMCreate: allocated tm_adm_list at 04ED32E0
DpShMCreate: allocated tm_adm at 04ED3310
DpShMCreate: allocated wp_ca_adm at 052435A0
DpShMCreate: allocated appc_ca_adm at 05243A50
DpShMCreate: allocated comm_adm at 05243F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052C4DB0
DpShMCreate: allocated gw_adm at 052C4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052C4E20
DpShMCreate: allocated wall_adm at 052C4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Wed Jan 14 05:46:50 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
ERROR => <EsNT> NTGetBaseAddress failed, no free region [esnti.c 1450]
Error 15 while initializing OS dependent part.
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 9556]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 9485]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 14 05:47:00 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Jan 13 21:47:00 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Tue Jan 13 21:47:00 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Tue Jan 13 21:47:00 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Jan 13 21:47:00 2009
=============================
Slots: 20, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 14 05:47:05 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >Veeru_NSP_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
Wed Jan 14 05:47:06 2009
***LOG Q05=> DpHalt, DPStop ( 3892) [dpxxdisp.c 10333]
Good Bye .....Hi Eric,
Actually in my NSP_DVEBMS00_VEERU thePHYS_MEMSIZE is set to 128
So.....
Do i need to change in the here below file.....:
If yes wht shall i change it to ?
Template for ABAP SID_INSTANCE_HOST
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = Veeru
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_EXECUTABLE = C:\SAP\NSP\SYS\exe\run
DIR_CT_RUN = C:\SAP\NSP\SYS\exe\run
Instance runs without sapmnt saploc shares
DIR_INSTANCE = C:\SAP\NSP\DVEBMGS00
DIR_INSTALL = C:\SAP\NSP\SYS
DIR_HOME = $(DIR_INSTANCE)\work
DIR_GLOBAL = C:\SAP\NSP\SYS\global
PHYS_MEMSIZE = 128
rdisp/wp_no_dia = 3
rdisp/wp_no_btc = 1
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Messaging Service parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_spo = 1
rdisp/enqname = Veeru_NSP_00
rdisp/myname = Veeru_NSP_00
abap/buffersize = 100000
alert/MONI_SEGM_SIZE = 0
enque/table_size = 2000
rspo/local_print/method = 2
rsdb/ntab/entrycount = 5000
rsdb/ntab/ftabsize = 3000
rsdb/ntab/sntabsize = 100
rsdb/ntab/irbdsize = 1000
rsdb/cua/buffersize = 500
rsdb/obj/buffersize = 2048
rsdb/obj/max_objects = 500
rsdb/otr/buffersize_kb = 1000
rsts/ccc/cachesize = 6000000
rtbb/buffer_length = 500
rtbb/max_tables = 50
sap/bufdir_entries = 200
zcsa/installed_languages = ED
zcsa/presentation_buffer_area = 350000
zcsa/calendar_area = 300000
zcsa/table_buffer_area = 3000000
zcsa/db_max_buftab = 500
ztta/roll_area = 1000000
ztta/diag_area = 128000
ztta/dynpro_area = 150000
ztta/cua_area = 250000
rdisp/PG_SHM = 100
rdisp/ROLL_SHM = 100
rdisp/autoabaptime = 0
rdisp/bufrefmode = sendoff,exeoff
rdisp/wp_ca_blk_no = 20
rdisp/appc_ca_blk_no = 20
rdisp/max_wprun_time = 300
icm/min_threads = 5
icm/max_threads = 10
icm/max_conn = 20
icm/host_name_full = localhost
mpi/total_size_MB = 10
auth/new_buffering = 1
sapgui/user_scripting = TRUE
ssf/name = SAPSECULIB
ssf/ssfapi_lib = $(DIR_CT_RUN)\sapsecu.dll
sec/libsapsecu = $(DIR_CT_RUN)\sapsecu.dll
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
login/ticket_only_to_host = 1
rsdb/dbid = NSP
dbs/ada/schema = SAPNSP -
Software update can't check for updates because of a network problem mac
hi i am facing below probelm on my mac ... i have done all the ip setting on my mac Error is software update can't check for updates because of a network problem mac.Can any one please assit me...
Can Some solve my problem.....
-
"Software update can't check for updates because of a network problem" - help!
Recently, when I perform a software update check on the pulldown Apple menu, I get this error:
"Software update can't check for updates because of a network problem."
The only problem is that my network works just fine. I use the internet and get emails without any problem. But I can't figure how I can fix Software Update.
The only relevant updates have been for Glims and 1Password. Oh, and note the same problem trying to access the App Store; I just get a "Can't connect to the App Store" error.
Any hints?I have to solve all my own problems.
The problem was due to Little Snitch. Once I upgraded from 2.4.0 to 2.4.2, my system works swimmingly again.
FIXED! -
Networking problem from Mac running Leopard to Mac running Yosemite
I have a curious networking problem and I would love some suggestions about what might be causing the problem and how to cure it.
I have a PowerMac G5/1.8DP running Mac OS X 10.5.8 Leopard with a number of external drives attached that I use as backup for all my RAW files. These are mirrored on three drives.
When I mount the drives on my iMac desktop, running OS X 10.10.1 Yosemite, over a gigabit ethernet network, two things are happening - 1. some of the folders are invisible (although they are actually there and populated on the PowerMac) and 2. spurious, empty, folders with odd names appear on the Yosemite desktop.
I have checked on the PowerMac to see that the folders all contain files - they do - yet over the LAN they appear as empty folders with gobbledygook names. This happens on all my Macs running Yosemite so it appears to be a Yosemite problem, rather than a Leopard problem. To further reinforce that I have also checked the PowerMac from three other Macs, running Tiger and Leopard, and they can see exactly what is on the drives, with no missing folders or oddly named folders.
The images show 1. the folder as it appears on the PowerMac running OS X 10.5.8, with two folders RAW Files 26 and RAW Files 28 highlighted, 2. the same folder seen on the Yosemite desktop with two folders, RAW Files 26 and 28, missing and 3. the same folder on Yosemite with three oddly named empty folders.
I am at a loss to know how to cure it and hope that someone will be able to help.You can never, never, never transfer any installed version of PSE on any platform. You must always install from scratch on a new machine. By trying to do so you have made more work for yourself. You will need to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
which will not seem to do anything, but is a necessary step to break the links within the program. Then you can go around and manually remove everything related to PSE that you can find, not only from Applications, but also from your username>library>preferences and the library at the top level of your hard drive>application support>adobe. You must go to these locations manually; spotlight will not help you with this type of search.
Then you can reinstall from your original media or from the download here:
Download Photoshop Elements products | 13, 12, 11, 10
Maybe you are looking for
-
How to connect a time capsule with an ATT Elevate Hot Spot
Hi, Need help connecting my time capsule to my ATT Elevate Hot Spot....since I have no ethernet connection. Thanks!
-
Windows 7 Blue screen when diconnecting mounted vmdk
Twice today, I mounted a vmdk file of a Win7/32 VM on my Windows 7/64 Enterprise host (vmware workstation 11.1.0 build-2496824). VMWare itself was not running at the time, I mounted it through the Windows Explorer context menu of the .vmdk file. Moun
-
Itunes Dosn't Open After Upgrading to latest version
Itunes was working correctly before this incident occurred. The Itunes update seemed to install fine, but when i got to intsalling Quicktime problems arose. I received an error code : -3 message and around the same time i received "quicktime.msi can'
-
"Edit In Photoshop" command missing
I bought Lightroom and Photoshop Elements 10 last year (downloaded LR v4.3 yesterday) and sat down to learn how to use them together today (www.lynda.com Using Lightroom and Photoshop Together with Jan Kabili). When I open LR the Photo -> Edit In ->
-
PowerPoint Slides and Master Slides
I want to know if its possible to insert a PP presentation to a Captivate 5 Master Slide template. I looked at the Master Slide properties and i selected both options but the Master Slide information overwrites the slide presetantion. can anyone let